Linksys Wireless Router :: E4200 V1 Tops Off At 144+450 Not 300+450

Dec 21, 2011

I just received by replacement e4200 v1. I updated the firmware to 1.0.03 build 14 and am up and running just fine. The specs say e4200 should be 300+450Mbps. I am using a software "inSSider 2.0" to view my wireless setup. I get 144(N) at 2.4GHz and 450(N) at 5.2GHz. Please  note these are max bit rates and not connect speed or throughput rate. The "inSSider" software gives me the following:

2.4GHz - 1/2/5.5/6/7/9/11/12/14/18/22/124/28/29/36/43/44/48/54/58/65/72/86/116/130/144

5.2GHz - 6/9/12/15/18/24/30/36/45/48/54/60/90/120/135/150/180/240/270/300/360/405/450

I get this information by hovering on the max bit rate field on the row displaying my SSID. So is it correct to say that my e4200 is not designed to reach 300Mbps at 2.4GHz. There is an earlier discussion thread about connection maxing out 144. Please note I am not talking about connect speed or thru-put speed. Max design bit rates of dual band router labeled e4200.

View 9 Replies


ADVERTISEMENT

Linksys Wireless Router :: Can't Log Into E4200

Apr 4, 2012

I have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers.   I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Wan Not Available

Jul 27, 2011

Upgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.

View 2 Replies View Related

Linksys Wireless Router :: How To Setup E4200 As WAP Only

Jan 5, 2013

I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
 
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
 
I'd still want the E4200 to have a SID key for LAN access security.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Not Getting IP Address?

Dec 21, 2011

I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
 
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
 
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Does Not Have Any Provision To Use MAC ID?

May 13, 2013

I bought Linksys E4200, at a time that is the TOP of the line Cisco routers for Home use.I noticed a serious usage issue with it, I could not identify which are the wifi devices connected to choose for access restriction or parental controls, as the dialog box state only as "Network device", and software control by Linksys does not have any provision to use MAC ID or any other option "except " looking at the dialog box as "Network device".

View 4 Replies View Related

Linksys Wireless Router :: Connect E4200 To A Mac Via Afp?

Mar 14, 2011

How to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.  

View 3 Replies View Related

Linksys Wireless Router :: Can't Update E4200 V2

Jan 3, 2013

Trying to update it to the new smart Wifi  but getting this error "Incorrect Image File".Yes Ive tried redownloading yes ive tried different browers and yes to unziping the file! and Yes Im downloading the correct version I even tried version 1 for the heck of it and still nothing. 

View 3 Replies View Related

Linksys Wireless Router :: E4200 And Powerline Not Getting Along?

Jul 10, 2011

Just got a e4200. However I also have a cisco av power line adapter which worked fine. However when connecting to the 4200 it doesn't recognize the Internet. Have rebooted, reset switched ports etc. But it still doesn't work. It sees the network but not the Internet. Have tried everything ikon but no luck. Cannot connect my directive to the Internet. If I can't get it to work will have to run a 50 foot cable.

View 5 Replies View Related

Linksys Wireless Router :: Turn Off ULA On E4200 1.0.03?

Oct 8, 2011

Firmware 1.0.00 on my E4200 Hardware v1.0 provided a functioning 6to4 tunnel through Comcast's 6to4 facility. Windows and Linux clients on my local network discovered IPv6 addresses and were able to use them successfully.Unfortunately, after the upgrade to 1.0.03 this functionality was gone. I missed reading the ChangeLog, which said that the automatic tunneling feature was removed in 1.0.01. The now provided IPv6 functionality works much less well. First, automatic configuration (discovery of the 6to4 via IPv4 anycast) no longer works with Comcast's gateway. If I configure the tunnel manually, by specifying a 2002/16 prefix, I regain IPv6 connectivity, but only for Linux clients on my local network.
 
Windows 7 clients suffer from the problem that because the E4200 hands out ULA addresses, they end up preferring those ULA addresses when making global IPv6 connections in the IP 'source' field, which of course does not work. It's like putting your company mailbox code as the return address on a letter you send via US Mail. Other home routers, such as the AVM Fritz! (url,...) suffer from the same problem. However, they provide an option to turn off ULA at the router.Is it possible to turn off ULA for the E4200?

View 2 Replies View Related

Linksys Wireless Router :: E4200 Can't Log-Out Settings 192.168.1.1

Mar 26, 2012

I have a E4200 router v.01 and when i updated the latest firmware (due to security exploit) it seems that whenever i acess the router settings (192.168.1.1) it doesn't ask me nor to input the admin and the password anymore, using wifi or wired.. I want the usual proccess whenever i go to 192.168.1.1 it will ask me to input my admin and password to change my router settings..

View 4 Replies View Related

Linksys Wireless Router :: Use Cisco VPN Through E4200?

Jul 16, 2012

I have an E4200 and the Cisco VPN client on my home computer that I use to access a work network.  The VPN client cannot connect unless I either (a) bypass the E4200 and connect directly to my cable modem or (b) disable the SPI Firewalls on the router.  I have all the VPN passthroughs set to "enable" on the router, but still cannot connect.  The VPN client is using IPSEC over TCP on port 10000.

View 5 Replies View Related

Linksys Wireless Router :: E4200 Cannot Access FTP

Nov 15, 2012

I've been trying to get FTP Running up on my router for some time now.
 
I know my current WAN address and have setup a specified folder on my E4200 for the FTP partition. A username for myself has been created with login info and I have forwarded the port I have specified on my router's FTP configuration page.
 
I try to log into the server, but whenever I try to log into it, I keep getting a "incorrect login information" message back at me.
 
If I cancel out of that then I get an error message saying it can't find the specified folder and to check the address of the server.
 
I know the login information information is correct and I've tried changing the password to others of varying lengths.
 
I've also tried changing the port I'm running the FTP off of incase my ISP has blocked that port, nothing works.

View 9 Replies View Related

Linksys Wireless Router :: E3200 Or E4200 - Which One Is Better

Jul 6, 2011

I have a 6 year old wrt54g that is working fine but old. I want to upgrade and will go with the 3200 or 4200.  I really don't need the extra features on the 4200 since everything I have is hardwired (directly to two laptops and to two switches in other parts of the house for tv and printer).  I want wireless for times when we move a laptop but it wouldn't be all the time, and we won't (for now) use the media options. The difference in price between the 3200 and 4200 is less than $25 so costs is NOT a factor in deciding.So should I just purchase the 4200 since price is not a factor or go with 3200; I want the most stable of the two and will never need the extra wireless features in the 4200. 

View 8 Replies View Related

Linksys Wireless Router :: Only Getting 130 Mbps With E4200?

Dec 28, 2011

I bought a Linksy E4200 yesterday and set it up fine, but I only seem to be able to get 130 Mbps on my Wi-Fi. I looked through these threads and tried disabling the 2.4Ghz band and it still remains at 130Mbps. There was no change, also read I can try set up a secondary SSID. I really don't know much about routers or configuring them

View 4 Replies View Related

Linksys Wireless Router :: USB Support For E4200?

Nov 29, 2011

I have a Drobo and am connecting it via the USB port. The Admin Gui is detecting it but only showing 2048.GB capacity its bigger than this is this a limitation? I cannot connect to it via wireless connection/ ie via network. I have also updated firmware to 1.0.03

View 1 Replies View Related

Linksys Wireless Router :: E4200 Get No Connection At All

Nov 22, 2011

My dad recently got a E4200 router, My whole family are mac users, the connection are all okay with their computers, I'm the only one using Microsoft, ASUS running on Vista. The connection is fine when I'm near the router, but when I go to my room I get no connection at all, it connects for a second but then it goes on connection with limited access.

View 5 Replies View Related

Linksys Wireless Router :: E4200 / Can't Ping WAN IP

Feb 2, 2012

I'm using Linksys E4200 router.  I can't seem to ping the static WAN IP (from internally or externally).  All other connectivity seems to be fine.  I can ping the routers internal IP, as well as the cable modem and other external IPs.  But all port forwarding through the E4200 is failing.Should the default security/firewall setting allow port forwarding?  Or do some settings need to change?

View 2 Replies View Related

Linksys Wireless Router :: How To Reconfigure E4200

Oct 28, 2012

I have been set out to pasture by the Linksys support staff as I have passed my 90 free tech asstistance period. I had a power outage and now I have a solid Cisco light on the top of the router but I can not get any port light activity on the router. I don't see how I can reconfigure it if the system can not even access it?

View 9 Replies View Related

Linksys Wireless Router :: E4200 V2 Set Up At New Location?

Apr 12, 2012

I will be staying at a rental property that has ethernet cable & modem. If I bring my E4200 v2 router from home & connect it to their modem, will my Toshiba 16GB Thrive be able to access the internet via WiFi? When I initially set up the router, I ran the router CD on my laptop, and the Thrive automatically accessed the internet. Will the Thrive automatically do the same when I connect the router at the new location. There is no computer there to run the router software. Will the the network be secured as it is at home? Same network name & password?

View 1 Replies View Related

Linksys Wireless Router :: How To Upgrade From V1 To V2 E4200

Jan 3, 2012

is it worth it?  I still cant stream some of my higher quality 6+gb .mpg video files with the v1 with the .03 firmware.   I notice the v2 says faster or better HD video. [URL]

View 5 Replies View Related

Linksys Wireless Router :: New E4200 Will Not Connect

Nov 29, 2011

I just connected my new E4200 router, it worked fine until it recommended updating, as soon as it connected to do this, the power light started blinking every second and it will no longer respond. Support has not facilitate.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Wan To LAN Low Throughput

Jun 22, 2012

I have a E4200 V1 with 1G internet connection, when i connect my PC, with a cat6 cable, directly to the modem the download speed can upto 800Mbs, but when i connect through E4200 to the modem it down to 100Mbs.

View 1 Replies View Related

Linksys Wireless Router :: 3TB USB HDD Support On E4200 V2?

Jan 20, 2013

I saw that E6500 has a new firmware that supports 3TB USB HDD [URL] When will E4200v2 get this fix?  I'm using a WD MyBook Essential 3TB with NTFS, which is on the compatible list [URL].  But the router only sees 746.486GB.I tried the latest firmware 2.1.39.145204(Smart WiFi) and 2.0.37.131047(Classic).  Neither of them recognize the 3TB HDD.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Not Getting Any Connection Via XP / FTP

Mar 21, 2012

Last week I bought the E4200 thinking it was probably the best router on the market and if it worked properly, it would be...I think.I have attached a Seagate GoFlex Desk 2Tb USB drive formatted to NTFS to the USB of the E4200. I can map to it from my Windows XP computer with no problem and I can FTP to it from any browser...my Windows 7 machine is another story. When I try to map the network drive from the Windows 7 machine I get error code 0x80070035 every time. I've seen some other threads where people are having this problem but in the cases I've found, they aren't getting any connection via XP or FTP either.

View 2 Replies View Related

Linksys Wireless Router :: Where To Get New Firmware For E4200

Apr 14, 2012

There is a new firmware for the E4200 router and I have no clue how to get the file. I've been searching in the support section » download tab without success. Any link to the new firmware how to get it?

View 1 Replies View Related

Linksys Wireless Router :: Can E4200 DNS Redirect?

Jul 12, 2012

Not sure if I am using the correct terminology in my title.  Basically, I want to use a service like unblock-us.com or tunlr.net so I can access US Netflix content here in Canada.
 
These 2 services give you ip addresses to enter for your primary and secondary dns servers.
 
I would like to make it so only traffic going to netlix makes use of the unblock-us.com dns servers.  I know this can be done by installing dd-wrt and then using dnsmasq, but I would rather not have to go that route if can be done with native firmware.
 
If cannot be done 'out of the box' any other way to do without having to change firmwares?

View 2 Replies View Related

Linksys Wireless Router :: E4200 On CCC NAT Not Working?

Aug 6, 2012

I just upgrade my E4200 V2 from 2.0.37 to 2.1.38 (finally! would be nice if I knew before that I had to unzip the file before I could flash it....)
 
But when I enable NAT in the settings, there is no way to edit NAT entries that I've set before under firmware 2.0.37.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Cannot Get WAN IP Address From ISP

Jun 28, 2012

I just bought the Cisco e4200 v2 router, I did all the installations as the Cisco connect software instructed me and everything went fine.After the installation I configured the router on  the WAN settings as (Automatic Configuration - DHCP), like my old router (Linksys WRT54GL) and I saw that my router doesn't get the WAN address from cable modem from my ISP(it stays on 0.0.0.0), it doesn't renew the IP address.

View 3 Replies View Related

Linksys Wireless Router :: How To Determine E4200 V1 Or V2

Jan 14, 2012

The support and registration pages for the E4200 wireless router ask whether I have a V1 or V2 router. There is no place on the actual router that identifies it as V1 or V2, and the Cisco Connect application doesn't display this infomation either. What I do know is the following:
 
Model name:               Linksys E4200
Model number:            E4200
Serial number:             01C10C18104423
Firmware version:       1.0.03 build 14
Software version:        1.4.12005.2
 
How do I determine if this is a V1 or V2 router? The software updates are version specific.

View 9 Replies View Related

Linksys Wireless Router :: Vpn Access To E4200?

Nov 10, 2012

i have installed lutron lighting in my home and need to configure e4200 so i can access it from outside home with iphone application. Lutron manual says to go to VPN iphone setting and add PPTP  connection, server, account and password. I need to do same on e4200 but not sure where to go create pptp connection, accounts and passwords?

View 4 Replies View Related

Linksys Wireless Router :: E4200 - MAC Filtering

Jan 6, 2013

Since I have this router E4200 my network undergoes changes alone. I have a MAC filtering as I had in my previous WNRL 160N and had no problems but here the overnight me are the 14 that I have enabled MAC, put another 3 that are not from where I changed the settings WiFi network, I've put in hidden, change encryption type and others and continues to happen randomly, and I added the router directly to the list of allowed MAC. I have remote management disabled in the Cisco Network Magic are not those MAC. not because it adds the MAC and I removed some that I have put the single.

View 9 Replies View Related

Linksys Wireless Router :: E4200 - Connection Of V1.4 For Mac

Jan 29, 2012

I have just installed Cisco Connect v1.4 (11266.0), and have upgraded my E4200 software to 1.0.03.I want to add a USB printer connected to the router but when I open Cisco Connect, and select the "Add new devices.....' button, the only option for a printer is 'Wireless Printer' not 'Printer' followed by USB or Wireless as per the User guide.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved