Linksys Wireless Router :: Upgraded From E4200 To EA6500 / Can't Pull Up Local Website

Jan 29, 2013

i just upgraded from the E4200 to the EA6500.  i have a few websites on one of my machines, which i can access from outside my network no problem, but when i try to access it from inside the network, firefox gives the message "the connection to the server was reset while the page was loading".  i did not have this problem with the E4200.

View 7 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200 Does Not Allow Connection To Certain Website?

Jan 2, 2013

I have an E4200 (v1) with the latest firmware.  For some reason, the E4200 does not allow me to conenct to certain websites.  This is true for wired or wireless connections.To test, I connected a wired PC directly to my cable modem and was able to connect to all websites fine.  I also tried an old D-Link router I had on hand and was able to connect to all sites fine.  Went back to the E4200 and was blocked.  I re-loaded the firmware and same results.

View 4 Replies View Related

Linksys Wireless Router :: E4200 Can't Use A Specific Website

Aug 28, 2012

I was having a problem viewing the {Url } but it has worked for the past year. I just purchased a new router E4200 and thought that would reserve the issue. When I first installed it I could get on the site and then about 10 minutes later when I restarted my MacBook I could no longer get on the site. I can't get on it on my MacBook, or iPad but I can when I'm on 3G on my phone.

View 9 Replies View Related

Linksys Wireless Router :: E4200 - Can't Connect To Website Anymore

Jul 30, 2012

I have an E4200.  Since yesterday morning I can't connect to a certain website.  This happened all of a sudden.  I am able to connect to any other website I try to access, but this particular one won't connect at all anymore.  If I unplug the router and connect directly from my computer to my modem, then I can access it with no problem.  I haven't done anything to the router.  Was there some sort of update yesterday.  The website I can't connect to is [URL]

View 1 Replies View Related

Linksys Wireless Router :: E4200 As A Local Dns Server?

Apr 24, 2012

i'm trying to find out whether my e4200 has the possibility to be a local DNS server and if so, how I can configure it. As it is right out of the box, i cant ping any of my local machines on DNS. 

View 4 Replies View Related

Linksys Wireless Router :: Setting Up E4200 As Local Network

Jun 5, 2012

I've been playing around with my E4200 but cannot find the right combination of settings. My problem: I bought the router for cable internet that never happened. In the meantime I am accessing the web using a 3G dongle. Hoewever, while connected to the router (wired or wireless), all the PC's in my home refuses to access the 3G internet - it is as if it wants to use the E4200 to access the net, no matter what. So every time I want to access the internet, I have to disconnect the PC from the home network, and connect with the 3G on that particulat PC. (I have three PC's at home, 1 wired and two wireless). If I set the E4200 to bridge mode, I struggle to find a logical IP address, since I would ideally like to run the network at 192.168.1.X. How do I set the E4200 to allow a home network to be established without having to disconnect everytime I use the 3G on a PC? Also, it seems that if the router doesn't handle the DHCP duties, win7 by default makes the network public, which complicates sharing a lot...

View 5 Replies View Related

Linksys Wireless Router :: E4200 - Force A Specific Speed For The Local Ports?

Sep 14, 2011

Is there a way to force a specific speed for the local ports?  I'd prefer not to rely on the autonegotiation. 

View 5 Replies View Related

Linksys Wireless Router :: E4200 Local Area Connection Doesn't Have A Valid IP Configuration

Feb 14, 2012

I am setting up a new E4200 modem, and have not been able to use the wired connection. The Windows 7 diagnositic on all three computers tells me "Local Area Connection, doesn't have a valid IP configuration."Model: E4200v1..I am using a new E4200 router, along with a new SE1500 5-port switch and a new SE2800 8-port switch.I am using a wired network that consists of two desktop computers, a laptop computer, a network printer, three Direct TV recorders, two Roku streaming video players, a BluRay player, and an XBox gaming console.Here is what I have done so far.

1- I can bypass the router to establish a direct wired connection to the cable modem. This works to access the internet. It establishes a new wired connection called Network 2.
2- I can access the internet using the wireless connection to the router. It shows a valid IPv4 address.
3- With all cables in place, all the lights are flashing on the router and on the computers.
4- I had changed cables and swapped cable ends.
5- Using the wireless connection, I can access the router home page (192.168.1.1). It shows valid IP addresses.

The problem is that my old Linksys BEFSR81 stopped working, with the same eror message for the LAN connection, "Local Area Connection, doesn't have a valid IP configuration."How often does the WAN port go bad? On both a five-year old BEFSR81, and a brand new E4200?

View 7 Replies View Related

Linksys Wireless Router :: Unable To Pull Up E3000 Storage Page?

Mar 13, 2013

It's been a while since I sent into my router and messed with any of the Storage setting. I recently decided to change things around so I recently went in the router and attempted to access the Storage page but all I get is a blank page with this address http://192.168.1.1/storage/Disk_Management.asp.

View 4 Replies View Related

Linksys Wireless Router :: E2000 Doesn't Show Up In Selection Pull Down Menu

Oct 8, 2011

I'm trying to register my new linksys e2000-ew wireless router but it doesn't show up in the selection pull down menu. When I try the e2500 it says my serial# isn't correct.

View 5 Replies View Related

Upgraded To Windows 7 - Local Area Connection Disables Itself?

Oct 6, 2011

I have the exact same problem: network adapter disconnects itself and I am unable to disable and enable it again, because it is unresponsive under the device manager and the network and sharing center. The only solution is to reboot the computer, where I can then have access to the network adapter and can reset it.This is since I upgraded windows vista to windows 7 4 days ago. I have upgraded all the driversI have uninstalled the network adapter driver and rebooted, and reinstalled the latest update with no difference.Running the computer in safe mode with networking has not yielded a crash so far, but have not tested this enough.I have tried disabling IPV6 as some people have said this could be reason, but it still crashes.It is somewhat different from what many people mention as I cannot reset the connection without rebooting (which I could live with). I do not use torrents or any site like that.

View 1 Replies View Related

Upgraded Linksys WRT54G V.8 Wireless Router But Still Have The Same Speed?

Nov 28, 2011

I previously owned a Linksys WRT54G V.8 wireless router, I upgraded my router to a DLink DIR-655 N Router in hopes to improve my internet download speeds. As a comparison I ran several online speed test for both routers. However, All test yielded similar results with minimal improvements. I also downloaded large files utilizing rapidshare's download manager, again with no improvement in download speedI thought moving from a G to an N router would improve my download speeds. The drivers on the DLink router are current

View 1 Replies View Related

Upgraded To Linksys WRT54GL V1.1 Wireless Router Now No Internet Connection

Mar 11, 2012

2 routers (only one in use at a time!):

(A) Linksys BEFSR41 v3.1 Etherfast Cable/DSL Router w/ 4-Port Switch
(B) Linksys WRT54GL v1.1 Wireless-G Broadband Router w/ 4-Port Switch

Both routers are set to provide DHCP.DSL modem: Verizon Westell Wirespeed B90-210015-04 I have no idea whether this modem is also a router, but everything used to work. OS: Windows 7 Professional N x64, SP1 My computer has two ethernet ports, but only one is in use at a time. I also have VMWare Workstation installed, so there are a couple virtual adapters in the mix, but VMWare is not running during any of these tests.Yesterday (Sat, 10-Mar-2012) I replaced my old router (A) with the new one (B). The A router has been working fine for many years; I just needed wireless access. After the initial setup, the B router worked fine, using hard lines connected to the switch ports, and the wireless access features (laptop and Android phone) - for about a day. It suddenly dropped the internet connection early this afternoon, Sun, 11-Mar-2012, ~1220hrs PDT. I heard it go out because I was streaming NPR at the time.Using the B router, my desktop computer (connected via a wire) can still talk to my laptop (wireless), but neither of them can see the internet.When I swap back to the A router (wires only), it now has no internet connection either! But the desktop and the laptop (both wired) can still see each other via the (wired) router.When I remove the router from the network and connect the DSL modem directly to my desktop computer, I have internet access; it works fine! But not if a router is in the circuit.

(1) Router B seems to work because my wired desktop and my wireless laptop can communicate locally.

(2) Router A still works because my desktop and laptop can communicate with each other using a wired network hosted by the A router.

(3) The DSL modem seems to work because my desktop has internet access when connected directly to the modem.

(4) Neither of the routers can communicate with the internet through the DSL modem.

I spent an hour in a chat with Verizon tech support. I've power-cycled everything. I've reset both routers to default specs and reconfigured them. I've reset the DSL modem via its button. I've used different cables. It appears that neither of the routers can successfully communicate through the DSL modem to the internet. But they both used to. Why would it just suddenly stop connecting through the modem?

Scenarios:
computer <-> DSL modem <-> internet | works!
computer <-> either router <-> DSL modem <X> internet | NoGo
desktop <-> either router <-> laptop | ping OK

ipconfig /all results when connected directly to the DSL modem (internet connected):

Windows IP Configuration

Host Name . . . . . . . . . . . . : Serenity7
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

[code]....

View 5 Replies View Related

Linksys Wireless Router :: WRT160N - Upgraded Firmware Now Setup Page Won't Open?

Aug 7, 2011

I was having problems with the speed being between 30-58 kpbs when going through the WRT160N router, whether its hooked up wired or wireless, the speed with both was extremely slow and wouldnt fully open pager or would take dsl day slow. I hooked up straight to modem and I got 100+ kpbs so I figured its not my ISP, so I read that upgrading my firmware might make it faster, so I upgraded and hit and held the reset button for 30 secs like it recommended but now the 192.168.1.1 wont open, I get a message saying it cant open this page

View 4 Replies View Related

Linksys Wireless Router :: Ea4500 - Upgraded Firmware / Need To Associate With Smart Wifi Account

Jan 2, 2013

I just setup my new Cisco EA4500 and upgraded to latest firmware and signed up for my account.Local access to the router works fine and I see the Smart Wi-Fi admin/config interface However when I try to go to the following site: url...To access Linksys Smart Wi-Fi Tools, your router <em>requires</em> the <a href="url...Series Linksys Smart Wi-Fi Firmware</a> and you will need to associate your router with your Linksys Smart Wi-Fi account.On a computer or device connected to your router, open url... and follow the instructions. This requires that you enter the router password so have that ready.

However I see no way to perform the association step - my account exists and my router is configured.I am doing all this behind this router wi-fi network not remotely.

View 4 Replies View Related

Linksys Wireless Router :: E900 - Upgraded Firmware / Changed IP Now Cannot Access Setup Page

Jun 6, 2012

I bought E900, accessed setup thru 192.168.1.1, upgraded its firmware.. then changed router's IP, it reboots, then went blank, I cannot access the setup page anymore?

View 9 Replies View Related

Linksys Wireless Router :: Upgraded E3000 From Wrg54 To Increase Rang / Still Having Dead Spots

Aug 10, 2011

I have just ugraded to a E3000 from a wrg54 to increase the rang, but am still having dead spots. How to increase the range.

View 1 Replies View Related

Linksys Wireless Router :: Wrt54gs / Setup Local DNS Server To Manage Small Office Local-only Domain Names?

Apr 22, 2012

i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.

View 1 Replies View Related

Linksys Wired Router :: BEFSR41 Can't Be Upgraded

Mar 27, 2013

I have a BEFSR41 that often goes brain-dead and the DHCP stops working.  I've tried three times to download and install new firmware but it always fails with a "pattern mismatch". My current firmware version is 2.00.02 and the file I am downloading is 2.00.04 build 8. Yes, I have verified that my hardware version is 4.3.The download file from this website is corrupted.

View 1 Replies View Related

Linksys Wireless Router :: Setting Up QOS On EA6500?

Dec 23, 2012

I would like to know how to setup QOS on the linksys EA6500 wireless router. I know about the media prioritization settings, however, thats not enough for me. I would like to setup upload and download speed limits for certain devices on my network, like, say 300kbps download for a certain device at all times.

View 3 Replies View Related

Linksys Wireless Router :: EA6500 Downgrade To 1.1.27?

Dec 13, 2012

provide me with the latest (or one) release of 1.1.27 firmware for the EA6500. I am deeply disappointed in the last firmware upgrade and due to security and sudden lack of certain, or let's say all, functionality in bridge mode I need to downgrade or wait for an upgrade where that's fixed, but most likely not soon, or ever. Where could I find the firmware downgrade.

View 2 Replies View Related

Linksys Wireless Router :: EA6500 Not Support WOL?

Dec 14, 2012

I use EA6500 I Don't find WOL OTL..

View 1 Replies View Related

Linksys Wireless Router :: Use Two EA6500 In Same Network?

Nov 3, 2012

I was wondering if it's possible to use two EA6500 in the same network, one as main router and the other as anacess point?

View 2 Replies View Related

Linksys Wireless Router :: DSL Modem To Go With EA6500?

Jan 29, 2013

I have an EA6500 which obviously has 4 Gigabit ethernet ports for my home network, but I need a DSL modem to get it working.What's the maximum speed current modems can supply from the Internet to my router, is there such a thing as a Gigabit capable DSL modem these days or am I dreaming ? Is it possible to even get Gigabit dowload speeds via DSL or would I have to go cable to achieve something like that ?My main concern is I don't want to buy a modem that will slow down or 'throttle' the capabilities of the new router I've just purchased or have I got the wrong idea ?

View 7 Replies View Related

Linksys Wireless Router :: Don't See Anything About VPN Pass Through On EA6500

Dec 30, 2012

Looking to upgrade my old G router to the EA6500.  I don't see anything about VPN pass through on the EA6500 or any linksys N router.  Is this feature something they no longer include?

View 3 Replies View Related

Linksys Wireless Router :: EA6500 Without Routing / Using WAN?

Dec 29, 2012

I would like to use the EA6500 in my network - but nor as primary router (or in fact routing at all). I would have thought, one could simply tell the device to use a particular gateway, but it does not seem to be easy. I have used many other home routers as combined switch/AP/USB-drive (latest a D-Link DIR-655), but the EA6500 seems very picky. The "easy" "Smart Wi-Fi" setup requires internet access through the WAN port - and that divides my home network, which then have two zones which cannot really "talk" to each other. Alternatively, I can reset the device and access it directly on the IP (initially 192.168.1.1). But then I can change only LAN and WLAN settings. Stuff like Guest Access, USB-devices etc. won't work. Do anybody have success with this device without using the WAN port and the DHCP server?

View 8 Replies View Related

Linksys Wireless Router :: EA6500 - Way To Get FTP To Work?

Nov 13, 2012

I have a new EA6500 and am failing at getting ftp to work.  I have updated the firmware.My ftp folder is on a Seagate USB Go-Flex drive attached directly to the router via USB.  I have set up shares which I can see and access via my computer which is attached to the router.FTP is configured to use port 21 and UTF-8.

View 9 Replies View Related

Linksys Wireless Router :: EA6500 NAT Redirection Bug?

Nov 20, 2012

I have a pair EA4500s that I am swapping out for a pair of EA6500s.  One EA6500 is a router.  The 2nd EA6500 is set as a bridge and us being used as an Access Point about 200ft and two floors above the main EA6500 router.  The two units are connected via DECA (200MB Ethernet over DirecTV cable - an alternative for others with a cable provider is called MOCA).  So, basically two EA6500s serving as two Access Points on opposite sides of the house and all wireless networks on different channels but all sharing the same SSID.  Everything works GREAT except for one unusual issue.
 
The issue is with wired or wireless clients.  If I try to use my PUBLIC address with port number to address a local client on the local network inside the NAT network the NAT redirection fails.  In other words if I use 172.16.16.8 for a local web cam while inside my network from an iPhone or PC all works great.  If I use the external public address, however, the connection times out.  If I pop out the EA6500 doing the routing/NAt and swap it with the old EA4500 with basically the same config as the EA6500 everything works again.  The EA6500 and the EA4500 are configured identical for the most part and with the EA4500 as the main router NAT redirection works great but with the EA6500 NAT redirection fails.  I have the firewall setting to FILTER NAT REDIRECTION unchecked so that's not the problem.
 
Seems very odd.... and only seems to happen with the EA6500..... the work around is to use the local IP address when the client is on the inside and the public address when on the outside, but what a pain that is....

View 9 Replies View Related

Linksys Wireless Router :: Reverse NAT On EA6500?

Oct 9, 2012

Any work around to enable reverse NAT or similar functionality on the EA6500? I recently upgraded from a Dlink that did support reverse NAT to my internal devices through a dynamic dns service. Now I have to know the IP address for all the devices.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Getting Different Ip Instead Of Default Ip

Nov 27, 2012

i setup my new EA6500 with the ethernet cable from my cable modem plugged into the EA6500, but with my old E4200 still switched on, but disconnected, i seemed to have ended up with a ip address of 10.250.27.47, not the 192.168.1.1 i was expecting, which i had with the E4200, my question is, is 10.250.27.47 something i should expect with the EA6500, or do i need to do a factory reset on the EA6500 and start again with everything else switched off as a precaution ?

View 6 Replies View Related

Can't Access Website From Within Local Network?

May 7, 2012

I have recently set up a computer on my network to host a website.So i have done the basics and created a Dyndns account etc.Now I can view the website via this domain flyingant.dyndns.org/ on computers outside of the network and the pc that it is hosted on.But my problem is that I cannot view the website on any other computer on the network, it takes me to the routers login page.

View 2 Replies View Related

D-Link DIR-601 :: Route Website Name To Local IP?

Oct 7, 2011

I'm trying to have a website name:  remote.test.com  route to a local IP address but can't seem to get it working with this router.  I don't want to use the windows hosts file as there are different Operating Systems that will connect and so routing though this D-Link is the only option.  I have my wireless router connected to a separate network switch though it's WAN port where other computers sit as well as the target machine.  I can use the internet as normal like this so things are working fine.

[code]...

View 7 Replies View Related

Linksys Wired Router :: BEFSR41 V 3.1 - Firmware Upgraded To Wrong Version

Feb 26, 2012

I own a Linksys BEFSR41 v 3.1. I've been attempting to set up a home network with three computers; my main desktop running Windows 7 Pro x64, a netbook running the same OS and a box running Windows Home Server 2011 x64. The firmware listed for my router was initially 1.05.03.

My router has the issue with resetting its administrative password to the factory default and I've been unable to set up remote access to my LAN and home server. I decided to try updating the router's firmware, but none of the versions listed fit the one I have. The label on my router says v 3.1, but Cisco's site only has a 1.0, 2.0, 3.0, then skips to 4.1, 4.2, etc. The instructions on the site warn not to use a version for a different model, but are vague as to exactly what that refers to, as the model # and the version # aren't clearly delineated.

Anyway, I tried using the latest firmware and received the, "File Pattern," error. Although it didn't seem like anything had changed, I reset the router just to be safe, then tried the v 3.0 firmware update, thinking that the software was intended for all revisions of v3.0. This time it reported updating without a problem, so I reset the router again and went back to the admin page in my browser to check the firmware version listed. To my annoyance, the firmware is now listed as 1.05.00 - i.e. an earlier version than what was shipped on the router.

This means that not only is the issue of the password resetting not fixed, but any other fixes included in the original firmware are now wiped out as well and, needless to say, I still can't set up remote access properly.

How do I restore the firmware version?  Neither a reset nor a, "Restore to Factory Defaults," does this. How do I find an actual update for the router?  I can't find any mention of a v 3.1 on Cisco's site, let alone support information specific to this model and version.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved