Netgear DGND3700 - Switching To Non Compatibility

Oct 18, 2012

Running a small office and my Internet comes in via a Netgear DGND3700 wireless modem router. It has to be in a seperate room to the office so I have run a network cable to connect. I have a Brother network printer and 2 Macs which need to be on the same network. I own a small netgear FS105 but when I put it on the end of the ethernet cable from the router and connect everything into the switch nothing can get IP addresses from the router, which has DCHP on.If I plug the printer direct, it works and the macs work wirelessly.

View 5 Replies


ADVERTISEMENT

Cannot Connect To Netgear DGND3700 Wirelessly

May 5, 2012

I just bought a DGND3700, but can't get wifi working. It connects to the internet fine, but devices can only connect via ethernet cable. I can see the SSIDs - both 2.4GHz and 5GHz - but whenever I try to connect, after entering the password I'm told that "Windows was unable to connect to (SSID)". Of course, the Windows troubleshooter, but no luck. This problem happens across all my PCs and phones. The router has the latest firmware version. All blocking, access control, etc. settings are turned off.

View 2 Replies View Related

Any VPN Services That Can Connect To Netgear DGND3700 Router?

Jan 29, 2013

I'm looking to add a VPN service, and would prefer to have it right at the router rather then at the individual devices. With the ADSL Netgrear N600 DGND3700 router, any VPN that will interface with my router? I know many VPN's work with DD-WRT, but what about my stock FW on the router?

View 2 Replies View Related

Windows 8 Can't Connect To Netgear N600 - DGND3700 Router

Feb 17, 2013

My son just got an Asus Laptop from his school. It is running Windows 8.It connects to other peoples WIFI, just not my home WIFI.When he got it home he found the network, entered the password and nothing happened. Now it can't even find the network.There is nothing wrong with the router as every other device connects fine.The router is a Netgear n600 - DGND3700?

View 3 Replies View Related

Replace Speedtouch 330 Modem With Netgear Router Dgnd3700?

Dec 16, 2012

install a new N600 Wireless Dual Band Gigabit ADSL2+ Modem Router - Model DGND3700, to replace a Thompson Speedtouch USB Modem.

PC Windows XP Home Premium Media addition - Main PC X2 Laptops Win7 & Vista - fully working on wireless no issues.

I have managed to get two laptops working wirelessly with no problems, my main problem is the master pc needs to be able to use this router as well, but I cannot get it to work via the Ethernet cable!! I can get to to the Routers config page, I have done the following:

unplugged and removed the speedtouch modem, the old dial up connection is still available on the pc along with the speedtouch software and driver, I left this in place just in case the pc needs to revert back to the speedtouch modem, if I am unable to resolve this issue.

I have set the ip address on the PC to static and input the relavent Subnet and Gateway I can ping the Routers address 192.168.0.1 even though I have reserved the PC's Mac address and IP Adress I am unable to get to the internet. I have tried setting up a new internet connection via windows wizard.

when i look into the nework connections section in windows the local area connection is 100mb and there seems to be another connection which looks like another internet connection this indicates I am connected however I still cannot get an actual google session running.

View 1 Replies View Related

Netgear DGND3700 USB Storage - Unable To Edit Settings For Shared Folder?

Dec 13, 2011

Have just had a stab at using my Netgear DGND3700's USB drive sharing - I had a spare external HDD + I want to be able to access files on it both over the 'net and from local network. Both work fine, very easy to set up, however I am unable to edit settings for the shared folder, which means I am unable to password protect it.

I don't need a password for local sharing but obviously it isn't ideal to have files freely available on the Internet, have looked into troubleshooting but can't find any similar stories with Netgears.I click "edit" or "create network folder" and it loads for a second or two but just stays on the same page. There is only one option to select but I have tried clicking the radio button first anyway, then clicking edit, same result.

View 1 Replies View Related

Netgear WNDR4500 / 802.11n And 802.11ac Compatibility?

Mar 31, 2013

I know that N operates on both 2.4Ghz and 5Ghz, whereas AC operates only on 5Ghz. Yet many AC routers advertise as operating on both 2.4Ghz and 5Ghz. So what happens when you connect to an AC access point on 2.4Ghz? Does that operate using 802.11n?

What happens when you try to connect to an 802.11ac access point using an 802.11n client on 5Ghz? Is this possible, or are legacy connections only possible at 2.4Ghz?

I have a Netgear WNDR4500 (802.11n, dual band) currently that I am very happy with. I figure I will eventually switch over to AC. I'm trying to determine if I would be better off simply replacing the N unit with an AC unit, or running both (perhaps WNDR4500 to handle 2.4Ghz clients, AC access point to handle 5Ghz clients, or similar).

View 7 Replies View Related

Networking :: Subnetting Network DGND3700 For Increasing Performance

Apr 10, 2012

I wanna subnet my Network to increased performanced but im alil confused hereWhen looking at my ROUTER STATUS this is what i have.

INTERNET PORT
IP Address XX.XX.XXX.XX
gateway ip XX.XX.X.X
XX.XXX.XXX.XX
LAN PORT
ip address xxx.xxx.x.x

Which one of this ip addresses do i have to subbnet?,my router is a ,NETGEAR N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700 Wireless router - 4-port switch (integrated) - EN, Fast EN, Gigabit EN, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n.

View 19 Replies View Related

Cisco Switching/Routing :: Compatibility Between 887VAM-W-E-K9 And 800-IL-PM2?

Jun 13, 2012

Are 887VAM-W-E-K9 and 800-IL-PM2 compatible? We have got both of them but it seems that router has a 30W power source and module has a 80W power source.

View 1 Replies View Related

Cisco Switching/Routing :: WS-X6748-GE-TX And SUP-2T Compatibility?

May 13, 2013

I have a WS-X6748-GE-TX with the WS-F6700-CFC daughter card. Is it possible to replace the WS-F6700-CFC daughter card with a WS-F6K-DFC4-AXL to make this compatible with the SUP-2T? Or, are there differences between the CFC and DFC base modules?

View 11 Replies View Related

Cisco Switching/Routing :: CAT 6509 STP Compatibility With F5 LTM

Sep 1, 2012

We have connected a single F5 box with dual links to 2 different Cisco Catalyst switches using 802.1Q trunks. F5 is configured with RSTP mode and on Cisco Switch RPVST+ is configured.STP root bridge is hardcoded on the Cisco side. Loop Guard is globally enabled.On F5 STP link type is Auto, STP Edge port is disabled since that port is connected to the cisco switch.When we are failing over the F5 primary link to the secondary link we see 'Loop Inconsistent' on the cisco switch and things dont work after the failover.We have tried configuring the F5 as STP passthrough but that doesn't fix out the issue.I have checked out the forums and found out following recommendations

1. Configuring MSTP bw F5 and Cisco for better compatibility (Not possible from Cisco side because of a major change in large production setup)

2. Configuring VSS in Cisco switches (not possible due to hardware limitation)

3. Connecting F5 using single links to each switch (redundancy compromised)
 
I am wondering that on which default vlan does the F5 STP instance0 sends the STP BPDUs ? the term used on Cisco side is native vlan and others use PVIDs; that F5 default vlan should match the native vlan on cisco trunk side.

View 2 Replies View Related

Cisco Switching/Routing :: Compatibility Between Nxos 5.2.(4) And Epld 5.2(3)

May 31, 2012

we have to upgrade to nxos 5.2(4) but i cannot find same image for epld , i only see a downlable image with version 5.2(3). Do you see any problem if we upgrade kick and system image to 5.2(4) with epld 5.2(3)?

View 3 Replies View Related

Cisco Switching/Routing :: Nexus 5020 And GLC-T Compatibility

May 27, 2012

The below nexus 5020 nx-os version and type/revision of my GLC-T is compatible with each other? I noticed also the "Transceiver calibration is invalid"  when i do show int e1/8 transceiver details , what does it mean?

View 8 Replies View Related

Cisco Switching/Routing :: FSM726S - GBIC Compatibility

Oct 22, 2012

I've inherited a network. It looks to have been setup as 10/100 originally, using Netgear FSM726S switches with fibre connecting the switches. The fibre to copper conversion is mainly achieved with 10/100 media convertors rather than GBICs - not sure why - though there are some GBICs in use. Some of the "key" switches have been upgraded to Cisco Catalyst 2960G switches, but nothing else has been touched, so most of the network still runs at 100MB.

View 1 Replies View Related

Cisco Switching/Routing :: VSS With VS-S720-10G-3C And WS-X6748-GE-TX Compatibility?

Feb 7, 2012

We are upgrading two standalone 6509E chassis to a VSS system with new VS-S720-10G-3C cards.  The 6509's have WS-X6748-GE-TX card with DFC3B daughter cards (see below).  The compatablity matrix (see below) states that 67xx cards are supported but it goes on to state DFC3C or DFC3CXL cards are needed.  So does this mean that the existing WS-X6748-GE-TX cards have to be upgraded or will they be supported? 

Core #1Mod Ports Card Type                              Model              Serial No.--- ----- -------------------------------------- ------------------ -----------  1   48  CEF720 48 port 1000mb SFP              WS-X6748-SFP       SAL  2    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SAD  5    2  Supervisor Engine 720 (Active)         WS-SUP720-3B       SAL  6    2  Supervisor Engine 720 (Hot)            WS-SUP720-3B       SAL  7   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SAL  8   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     SAL

[code]....

View 3 Replies View Related

Cisco Switching/Routing :: HWIC-2FE And 2811 Compatibility?

Jan 24, 2013

Just double-confirm that 2811 is compatible with HWIC-2FE based on your experience? Which IOS is compatible with HWIC-2FE? [URL]

View 3 Replies View Related

Cisco Switching/Routing :: Stack Compatibility With WS-C3750X-12S?

Dec 18, 2011

Can a WS-C3750X-12S coexist in an existing stack made up of a WS-C3750G-12S and a WS-C3750G-24TS?

View 7 Replies View Related

Cisco Switching/Routing :: 3825 - Sfp And Fiberxon Compatibility

Feb 4, 2012

I have a Cisco 3825 router with a sfp module .(multi mode Cisco sfp ) connected to a Alcatel switch with fiberxon sfp. On a Cisco router the sfp card is been recognized and is seen when i used " show ip int brief "  or show inventory  commands. However the line  protocol is down.  
 
is their any compatibility issue with one side Cisco sfp and other side fiberxon sfp ?   we have tested Cisco sfp -------Cisco sfp works fiberxon ----------------fiberxon works .

View 3 Replies View Related

Cisco Switching/Routing :: Switch IOS Compatibility WS C4503

May 7, 2012

Currently i've a cisco ws-c4506-e edge swith loaded with cat4500e-ipbasek9-mz.122-53.SG4.bin image file. Can i use this image file on a ws-c4503-e as well?

View 1 Replies View Related

Cisco Switching/Routing :: Compatibility Between 3750 And 3750v2

Mar 25, 2012

I would like to confirm if Cisco 3750 and 3750v2 can work in a stack? My Cisco 3750 is working on 12.2(37)se while 3750v2 is working on 12.2(50r)se.

I tried to configure the above on a same stack but seem to have compatibility issue and fail to work.

View 3 Replies View Related

Cisco Switching/Routing :: WS C3750 Stack Switch Compatibility

Mar 13, 2011

We have existing stack of  3 units of  WS-C3750-48TS-S ( 100 mbps ports with Gigabot uplinks). with IOS as follows, Can we add  WS-C3750G-48PS-S  in this same stack (this is 48 Gigabit ports)?

View 2 Replies View Related

Cisco Switching/Routing :: C3KX-PWR-1100WAC / WS-C3750X-24P-S - Compatibility

Mar 5, 2012

Is the C3KX-PWR-1100WAC= compatible with the WS-C3750X-24P-S?

View 1 Replies View Related

Cisco Switching/Routing :: Nexus 5596 / 2248 TP - Compatibility With SFP-10G-SR

Jan 31, 2012

I am looking to see if Nexus 5596UP & Nexus 2248TP GE compatible with SFP-10G-SR? The reason is because a consultant was hired on to "design" the network layout and has decided to purchase Cisco SFP+ Copper Twinax Cables which have a 10M limit. A small handful of the Data Center racks are 10-15M away... just out of reach of the Twinax. I would prefer NOT to move the LAN row so that it is more centered in the room. Can I use the SFP-10G-SR to connect the 2 switches (5596 & 2248) together? This SFP has a 26M reach on standard 10gig fiber, the small cost increase per connection is of no concern.

View 2 Replies View Related

Cisco Switching/Routing :: 6513 Compatibility With 10GE Blades

Jun 4, 2012

I am getting conflicting info about this, and need to get confirmations.Is the older 6513 (non E) model compatible with WS-X6407-10GE blade?The switch we're getting this for have WS-SUP720-3B, 6000W power supply, and WS-C6K-13SLT-FAN2.From what I read they are compatible if entered in slot 9-13, but I also heard that 10GE modules are not compatible with the non E chassis.

View 1 Replies View Related

Cisco Switching/Routing :: 1921-SEC/K9 - HWIC-4ESW Compatibility

Jan 9, 2012

Does Cisco 1921-SEC/K9 support HWIC-4ESW ? I require 4 x 10/100 Ethernet ports
 
If yes how many ? are there any drawbacks if i use this module instead of a switch?

View 5 Replies View Related

Cisco Switching/Routing :: 6506 / 6509 - Compatibility Matrix

Mar 28, 2012

Will a WS-X6748-GE-TX work with a Sup 32 in a 6506/6509?

View 2 Replies View Related

Cisco Switching/Routing :: WSC 3750 48TS S / 3750V2 - IOS Compatibility

Jun 12, 2012

My old switch software version is c3750-ipbase-mz.122-35.SE5 and model number is WS-C3750-48TS-S and my new switch Software version is c3750-ipservicesk9-mz.122-50.SE5.bin and model number is WS-C3750V2 . I want a compatible (prefer same) version of IOS which works on both the switches as both the switch will be  in a stack..

View 4 Replies View Related

Cisco Switching/Routing :: AIR-CAP1602I-N Access Point Compatibility With AIR-WLC2112-K9

May 22, 2013

I have Cisco Access point AIR-CAP1602I-N-K9 ,My doubt is,is this AP support on WLC AIR-WLC2112-K9

View 1 Replies View Related

Cisco Switching/Routing :: Nexus 7009 Line Cards Compatibility?

Apr 14, 2013

I wanted to know that in nexus 7009, can i use mix of F2/M1/M2 series line cards ? will they work with each other ? Lets say i have F2 line card and M2 line card, will servers attached to them will communicate with each other ?

View 4 Replies View Related

Cisco Switching/Routing :: 3560 / Nortel 1612G - Compatibility Between Two Switches

Sep 12, 2012

I have a Cisco 3560 connected via fiber to a Nortel 1612G.  The connection is up/up, the V LAN's on the switch work as needed, but I can not ping the switch from the Nortel, and as a result I can not remote into the Cisco for management.  I see in the configuration for the trunk that it is configured for a native v LAN, but I don't see it defined which v LAN's are allowed, could this be the issue?  I will provide some of the config information for the Cisco side, I understand the issue may be on the Nortel end but if the Cisco part looks OK? 

Port config for the trunk:
 
interface GigabitEthernet0/49
description port_6_1612G
switch port trunk encapsulation dot1q
switch port trunk native v LAN 120
switch port mode trunk
                  
Native v LAN config:
 
interface Vlan120ip address 172.16.120.11 255.255.255.128

View 3 Replies View Related

Cisco Switching/Routing :: Power Supply Compatibility From 4500 To 6500

May 9, 2013

can I plug power supply from 4500 to 6500? more specifically we have power supply PWR-C45-1300ACV. And we need to place some power supply to 6500, which has only one active module. So 1300 should be enough for it. But we dont know if they are physically compatible, if it is possible to plug. I didnt find this power supply to be officially?

View 4 Replies View Related

Cisco Switching/Routing :: 2620 XM / 1605 R - Compatibility With Verizon Appliance

Jan 12, 2013

I am new to Cisco networking (I just passed my A+ test and am working on my Network + test with an end goal to finish with a CCNP) and I bought a Cisco 2620 XM and a 1605R to figure out how to setup and practice on.   In my house we have Verizon Fios with the standard Verizon appliance feeding internet to the rest of the house.  My question is that will my Cisco appliances be usable with an out connection from the Verizon appliance?  I am concerned because the connection that comes into my room from the Verizon router would be considered a LAN connection, not a WAN?  Also in order to configure the router, I believe it needs an RJ-45 to serial to plug into a computer for setting up.  My computer doesn't have a serial port so will an RJ-45 to USB work (since that is serial as well)? 

View 3 Replies View Related

Cisco Switching/Routing :: 3750-24TS-E Switch IOS And Hardware Version Compatibility

Nov 15, 2012

I am confused about some things regarding the different IOS versions and their compatibility with certain switch hardware. I understand the differences between the IPBASE and IPSERVICES ios but am not quite clear as to how you can tell which ios images will work on which Cisco switch model platforms, other than the fact that some switches are designed only to run the IPBASE images and others have advanced hardware to run the advanced images. For instance, if I have a 3750-24TS-E with an IPBASE ios on it, can I load an IPSERVICES ios that came from say a 3750G-24TS-E1U? whether the ios on one platform can be transferred to another?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved