I have followed all instructions to forward port 22 on my netgear router WNDR 3400v2. It says it forwarded but according to port tracker. Its closed. I am having this with two different locations. All IP addresses are correct and the router can ping them. It just wont open. Using SSH program for port 22 access.
I have a Netgear wnr2000v3 Router connected to my Motorola Surfboard Gateway.I have a freePBX Server (virtual running off of VMware Workstation 8) that needs ports 10001-20000 and 5060 forwarded to the server at 192.168.1.110
I added the portforwarding as in this photo:
When I use a port tester it still says "Port 5060 is closed"I have also turned off Windows Firewall. What else could be blocking these ports?
I have a problem trying to forward ports needed for steam: my connection to internet looks like this Cisco epc3212 cable modem -> netgear wnr3500v2 ->my pc, all via ethernet cable I set up static ip for my pc and forwarded ports in router but after checking results on web port scanners it only changed from timed out to closed. I have no firewalls, neither on my pc or router, i called my isp and they told me they don't block any ports. I have windows 7. After trying dmz all my ports remain closed except for 3389 which is remote access for windows. I.ve been working on this for past few hours and i'm loosing my mind .
We operate a home office network (workgroup) of 6 older PCs running Windows XP SP3.It's a Windows based network using a designated "home" PC as a server, and until recently we were using ethernet cables and a hub/switch for sharing files which worked well because we only share small document files, no music or video.The workgroup does not have a shared internet connection, we don't want or need one for what we do, although the individual PC's can connect to the web using USB dongles just for checking e-mail.Recently the ethernet hub died and I decided to take the opportunity to upgrade to wireless file sharing.None of the PCs have inbuilt wireless adapters so I bought a D-Link USB wireless adapter for each PC.I also bought a Netgear N300 router, thinking that this was suitable entry level equipment for wireless file sharing. Now I'm not so sure.So far I was unable to install the router on the "home" PC because the installation CD seems to assume that the router will be used for sharing an internet connection and does not seem to offer an installation option without a standalone modem. How to install this type of router to create a closed home wireless network without a shared internet connection.
I have two servers: serverA and serverB. In serverA there is a ssh session open to router1 from source TCP port 41760(from ephemeral port range). Is it somehow possible to detect from serverB, is there is a process associated with TCP port 41760 in serverA? I mean if I check with nmap, I receive a packet with RST flag on, but I'll receive similar packets for closed ports as well. Is it possible to distinguish, whether a RST packet is from closed port of from port, which has a session established with another host?
i have a 54G wireless home router ..... successfully port fowarded an application from a CPU (server).... but after no connection made from the user to the server..... it suddenly close the application ..... so what i did is to reboot the router in order to refresh the connection ...... Is there any other ways to fix this sudden close of the ports ?
I have a Cisco ASA 5505 with a fairly simple set up. Few VPN tunnels and only 3 open ports for applications. I have entered the following lines static (inside,outside) tcp interface 9002 10.0.3.230 9002 netmask 255.255.255.255 access-list outside_access_in extended permit tcp any interface outside eq 9002.I have done this before with zero issues. The other two ports are open, however, port 9002 will not be visable from the outside. The ASA says it is open, but if I go to a site like canyouseeme, it shows closed. I cannot connect to the application either.
I purchased a WNDR3400v2 probably around two months back and since then I haven't had any issues with it. Now, I like to keep the security setting on WPA2-PSK for the security but my brothers and my own Nintendo DS don't support this security for connecting. So, since my previous router had a guest network, I decided to activate and deactivate that network with no security when it was needed (Half hour or less), and I haven't had any issues until doing this with the WNDR3400v2.
Basically what happens is, after disabling the guest network again, no wireless devices can connect to the router... PERIOD... Upon trying to connect it also says "You are unable to connect) right after it verifies the password. I spent a few hours trying to fix it but I haven't gotten anywhere really..
What I have tried-v
-Resetting the Router
-Powercycling the Router
-Resetting it to factory defaults and restoring previous settings
-Enabling and disabling the network
-Deleting the original network saved on the computers and connecting as if from a new network.
-Also tried restarting my computers
-Updating the firmware (For some odd reason I couldn't find any firmware last week..)
I researched it a bit and found some solid leads, but nothing that fixed the issue. The only "Fix" I could find was disabling the security and leaving it open.. Which I would prefer not to do for obvious reasons...
I got a problem with my netgear WNDR3400V2.As u see in this picture the box allow guest to access my local network is greyed out.I made the router an access point and have no clue how to make it normal again.
Can open (url) in work computer but not at home - Message coming up at home that it will be closed for maintenance and that was last week and has since finished now as i can open site at work but not at home
I have my 2Wire AT&T U-Verse router properly set up to forward the port 25565 from my machine. (Incidentally, PortForward.com gives me a blank page when I try to look up how to do this.) However, when I test the port is indeed open ( Open Port Check Tool - Test Port Forwarding on Your Router ), it returns as closed. Yes, I'm running the server software while I run the test. I only have the Windows Firewall, but I ran attempts while the firewall was completely disabled as well as with just the appropriate programs allowed.
i still newbie to configure eBGP, i have Router 3600 series, and i configure BGP neighbor to my ISP, but the peer still don't established,there is warning like this, Connections established 339; dropped 339 "Last reset 2w4d, due to Peer closed the session No active TCP connection"
any one can explain to me about "due to Peer closed the session"? i've read some documents for troubleshooting BGP, and do some step to troubleshoot.
I am trying to forward the ports for several ip network cams, that have built in webservers, on this router. I have done this before on my old Linksys router with no problems but the Netgear has me stumped.The only way I can reach any of these devices from the Internet is to map them to port 80. But that limits me to one device, hence the need to forward more ports.All cams have fixed ip addresses so it is not an issue of their ip addresses changing.
Trying to connect to a computer on a client's network. He has a Netgear WGR614v9 router. I talked him through opening port 23 to 192.168.1.200. I have done this many times on other routers and it should have been simple but could not connect. Had him enable ping response so I could ping his router to verify the connection and ping was good. Tried my port scanner and only port 21 is open. Had client verify the port forwarding data and it is correct. Does he need to restart the router to enable port forwarding?
When ever I try to port foward It always says the ip adress should be in the same subnet as the lan ip adress when i'm using my public ip adress then I changed my ip adress to the public ip and it worked but no one can't get in the server.
I play a game Warcraft III the frozen throne from blizzard entertiment and am using router netgear vvg2000 i ported port 6112 it worked for some time but in the last week the port was closed i dont know what happend i cant host games anymore and i searched alot for soloutions in google.
I'm trying to set up a Minecraft server so I can appear to be a hero to my 8 year old son. I have to forward a port to 25565 adn I've followed all the instructions on how to do this on my netgear DGND3700v2. I've also turned off my Windows 7 firewall, but when I go to a test website, I still get a message saying the port is closed. I don't have a static IP address, is this absolutely critical or does it just mean that the boys will have to log on to a new IP address each time they want to play?
At work, our proxy blocks everything except for HTTP(S), FTP, and a small handful of other company-specific ports on the _outbound_ connection. On my router, I like to port-forward SSH to my Linux computer server at home but since at work IT blocks out-bound SSH, I have to masquerade the SSH port-forward on my server to get past the corporate proxy. Normally, I've done this in the past by doing something like WAN:9090 (allowed by my IT) --> LAN:22 in my router's port forwards to get SSH routed to my Linux box from the web.
I recently purchased a Netgear FVG318 and it doesn't look like it supports this kind of configuration. In the Security->Firewall Rules->Inbound Rules section of the router configuration I see how to do a port-forward but they only have a drop-down selection of common protocols and will simply 1:1 forward the ports. It doesn't look like it allows to do mis-matched ports on the forward like I'd like to do.
I need to upgrade my switch to something that has 24 ports. This is for home, simply to sling media around the house, etc. So 3-4 computers, boxes, AVR's, HTPC's, blah blah blah - just the usual stuff.
I was looking at the Trendnet TED-S24DG and the Netgear JGS524 (both are under a couple of hundred bucks). The cheaper the better to a degree - rack mount is preferrable. Both are unmanaged. Jumbo frames?
I need to buy a new router for my network (using DIR-655 for last 4-5 yrs). Would like to move to a dual band product.As I live in Canada and would like to purchase VPN to rid the geo tagging and enjoy US media content. I plan to buy a wifi router that supports VPN to accomplish my goal.
So, from modem, to router, then to a 24GB port switch, devices include 3 wired computers, tvs, boxes, players, blah blah blah, etc. Placement of the router is in my basement (has to be as this is where all my network/modem/server rack). I plan to also purchase an AP and place it on the 2nd floor of my home (2200sq ft) for coverage in the house.
Question is, once I add the VPN to get US content, there will be times when I want my own PC to NOT be on the US VPN.So, based on the above which dual band router under $130 and how much for the AP? And how do I setup it up so that my personal PC and be on and off the VPN?
Right now I can get a E4200v2 refurb for 60 bucks from NC$X? I was looking at Asus N66, but perhaps its too much for my needs?
I have a Dell Studio 1537 running on Windows Vista? my computer stopped being able to connect to the internet a few days ago and a "Dell Wireless WLAN Controller closed and stopped working" (or something along those lines) box would keep on popping up. I did some reading around on the internet and decided that maybe I needed to update the "drivers" for it so I went to the Dell website and downloaded the most recent version for my Dell Wireless 1510 WLAN mini card...that didn't seem to work any after I installed it. So I went ahead and uninstalled it (I assume I must have uninstalled something I shouldn't have) and now I'm stuck at the same problem. I can't connect to the internet!In Network Connections, it continually says that "Windows cannot find any networks". In Device Manager, under Network Adapters, it doesn't list the card there, although it lists "Broadcom Netlink (TM) Gigabit Ethernet". And from some suggestions I found on the net, I tried ipconfig/all in the comand promt and it says "media disconnected".
I have disabled windows firewall in Windows 2003 server control panel but only few ports are shown opened when i scanned with advanced port scanner why other ports are closed.How to open the closed ports?
I was trying few days ago a tutorial of SSH tunneling, but I got an error,"server unexpectedly closed network connection", although I did everything like in the video tutorial and port 433 was not closed.
I have set my Netgear WGR614 to a static IP, and I have tried port forwarding but I can't. I've tried disabling SPI Firewall and it still don't work. I have also tried enabling bridge settings on my connection in my modem settings, but that just wouldn't let me back on my internet. How I can port forward?I have a westell 610015.