Netgear Wgr614 Wireless Router - Configure AP WG102 As Repeater

Aug 5, 2012

I have a Netgear WGR614 wireless router connected to my WOW DSL modem and utilize WPA as security. wireless signal is good on first floor but drops significantly in my basement. I have a Netgear WG102 AP I would like to configure as a repeater and place in my basement to boost the WGR614 signal strength. What configurations must I apply to both or either devices to achieve this setup?

View 3 Replies


ADVERTISEMENT

WGR614 - Can't Get Into Netgear Router To Configure It

Dec 20, 2011

Can't get into my netgear router to config it. I have tried using 192.168.0.1 and 192.168.1.1. So far it will not give me a window to log in. It has allways work before on xp pro, but now i am using win 7 on my new computer.

p.s. the router is a Netgear model # WGR614

View 4 Replies View Related

Configure Two Wireless Routers - BSNL UTstartcom / Netgear WGR614

Jun 13, 2012

I've two routers, one which i got from BSNL when opted for internet connection. Its a Utstartcom Type II wireless modem and the other which i got from a friend is Netgear WGR614 wireless modem/router.Now coming to the real picture. I've the BSNL wireless modem connected and working perfectly on the 3rd floor on one PC, but NOT configured for wireless access and i've another PC on Ground Floor where i need an internet connection. Fortunately, i got a router/modem which is Netgear WGR614. I do not want a wired connection between these two PCs then wanted to try the wireless way?

View 1 Replies View Related

How To Connect Netgear Wgr614 V7 Wireless Router

Mar 27, 2011

i am trying to connect my netgear wgr614 v7 wireless router and i can't do it. i have the actiontec m1000 modem which is thru qwest i have read the setup manual available online on how to setup the modem with the router but it just doesnt do anything?

View 2 Replies View Related

Just Added Netgear Wgr614 Wireless Router And Now No Internet Connection

Feb 26, 2012

I just added a wireless router netgear wgr614 and I secured it and it worked for one day and then after that no internet connection. I've rest and unplugged both the modem and the router and still nothing.

View 1 Replies View Related

Information About Router - Netgear Wgr614

Feb 12, 2012

I have a prob with my laptops,wireless setup although it shows wlan on it will not work without a connection to the router,netgear wgr614,I have gone into Devise Mng and found the following faults,Serial cable IRDA problem code 43 & SRTSPX code 24 not working.

View 1 Replies View Related

Netgear WGR614 Wireless Router / Setting Up Wireless Bridge

Jul 8, 2011

My primary home wireless is a Linksys WRT54GS Broadband Router. I have an older Netgear WGR614 Wireless Router that I would like to setup as a wireless bridge to use in another room to connect my other electronics to (i.e tv, blu-ray, Wii).

View 3 Replies View Related

Netgear WGR614 V6 Will New Router Work With Old Laptop

Sep 27, 2011

I need to replace my Netgear WGR614 v6 router which is a good 4 or 5 years old, and i think is the cause of a very slow internet connection. Download speeds are reaching 1.1mb/s but browsing on the internet is unbelievably slow and fails to load pages most of the time saying the DNS look-up failed. I was thinking of purchasing the Buffalo Wireless-N300 Cable Router. I'm with Virgin Media, i think on 10meg broadband. I think it will support moving from wireless G to wireless N, but my laptop is fairly old too - Fujitsu Siemens Lifebook C series.

View 10 Replies View Related

Using Netgear WGR614 Router As Switch? (Wi-Fi Access)

Jan 9, 2012

I have a router TP-Link (without wireless) connected in my modem wich have this subnet : 192.168.0.*, that work fine. But I need a wireless connection too, my wireless router had this ip given by the TP-Link router: 192.168.0.13.

I have a NETGEAR WIRELESS-G ROUTER WGR614 which gain 192.168.0.13 but I need that gives ip's in the same subnet that TP link router. If the person connect to my wi-fi it should receive an ip like 192.168.0.*, I already try to disable the DHCP server in the NETGEAR but it's not working too. How can I do that ?

View 2 Replies View Related

Netgear WGR614 V9 Router - Unable To Resolve Server DNS Address / Error 105?

Dec 27, 2011

I'm connected through the router, a few times a day I cannot open web pages, getting error: Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address.Skype continues to work. Here are the results of pinging:

Quote:

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersSri Guru>ipconfig /all[code]....

One technician said that this is the providers problem, but I don't think so. When I restart the modem everything works.I have a Netgear WGR614 v9 router.I use ESET 5 security. Btw, connection drops on all computers connected through the router, so it's not my firewall.

View 3 Replies View Related

Netgear WGR614 V7 - Wireless Laptops Lose Connectivity

Sep 16, 2011

At my office we have a simple network using a Netgear WGR614 V7 router. 4 XP machines are connected via Ethernet cable and three other people are connected wirelessly (one XP laptop, one Win7 laptop and one Win 7 netbook). It appears that whenever the netbook is on the network, the other two laptops lose connectivity. The wired machines are fine. Power cycling the router and rebooting usually solves the problem.

View 3 Replies View Related

TPLink WA701ND / Netgear WGR614 - Dual Repeaters Accessing Single Router

Mar 23, 2012

I bought a tp-link WA701ND and a netgear WGR614. i wish to pick up signal using 701 and then let 614 repeat it. no more tech support coz im already broke.

View 1 Replies View Related

Use Wireless Router Netgear WNR1000 N150 As Repeater?

Jul 12, 2011

I have a wireless router Netgear WNR1000 N150. I am wondering if I can use it as an access point/ repeater, and if I can, how to set it up. The modem provided by the ISP is in the room with the desktops; can I place the wireless router in a room

View 2 Replies View Related

Wirelessly Connect Netgear Wgr614 V6 To Be Used As An Access Point?

Jun 3, 2011

I am trying to wirelessly connect a netgear wgr614 v6 to be used as an accesspoint and my router connected to the cable modem is a dlink dir825

View 1 Replies View Related

Configure Wireless Router To Work As Repeater?

May 14, 2012

I have here a canyon wireless router. do you know where I can find online a tutorial or manual on how to configure a wireless router so that it acts as a repeater?

View 3 Replies View Related

Netgear WGR614 Local Area Connection Doesn't Have A Valid IP Configuration

Jan 27, 2013

I couldn't connect wirelessly to my NETGEAR router because of the "DNS server isn't responding" error.I then eventually made the rather dumb mistake of doing a factory reset, so now the router isn't even in range apparently Therefore I connected to the router with a wired connection and after a "Investigate router or broadband modem issues" error I eventually came to the error in the title.Currently I'm connected directly via my virgin modem with a wired connection, so this is my means of creating this thread.

Below is what i got from ipconfig /all using a wired connection to my router.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Userschenupan>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : CGPC
Primary Dns Suffix . . . . . . . :

[code]....

View 1 Replies View Related

Linksys Wireless Router :: Configure WRT54G As Repeater Signal Of WRT120N?

Jan 2, 2013

Is it possible to configure the WRT54G as a repeater signal of the WRT120N?

View 1 Replies View Related

Linksys Wireless Router :: EA6500 How To Configure As Base Station For Repeater

Oct 20, 2012

I would like to use my new EA6500 as the base station and another wireless router with Wireless Repeating Function as a repeater. Is the EA6500 capable of that?? I have not found any documentation on that subject.

View 6 Replies View Related

Linksys Wireless Router :: Configure E2500 As Router And WAP54G As Repeater?

Dec 28, 2012

Is it possible to configure a E2500 as router and WAP54G as a repeater? I used to have a WRT54GS as router but it has broken and now I bought a E2500 to replace it.

View 2 Replies View Related

Linksys Wireless Router :: Configure Access Point As Repeater For 2.4 GHz Band On WRT610N?

Jun 22, 2010

I'm very dissatisfied with the range and signal strength of my new WRT610N dual band router compared to the WAP54G Access Point I used before.Can I configure the Access Point as a repeater for the 2.4 GHz band on the WRT610N if I use the WRT610N as a Wireless G router rather than wireless N? 

View 5 Replies View Related

Use Netgear WNR2000 Router As Repeater?

Jun 29, 2012

I'm trying to use a Netgear WNR2000 router as a repeater, I have a Netgear WGR614v9 as the main router in my house. I have followed online guides as closely as possible but am still having troubles. My main router is working fine, everything can connect to it and gain access to internet despite having to change the security to WEP to allow for the repeater function to work. Now I am having troubles getting the repeater (WNR2000) to connect to my main router. The ip address of the repeater is listed in the connected devices of the main router and everything is managing to 'find' the repeater just fine but when I connect and put in the WEP key there is no internet connection. I read that a static ip address is needed or something like that but I am completely baffled

View 1 Replies View Related

Using Netgear Wndr3300 Router As Repeater

Sep 27, 2011

Can I use router as a repeater for a linksys router(wrt54g)

View 1 Replies View Related

Setting Up Netgear WNR2000 Router As A Repeater

Jul 22, 2011

ok I have logged in my router & clicked the repeater mode. whats the next step. BTW I am a complete newby to networking.

View 4 Replies View Related

Setting Up Netgear WNR2000 Router As A Repeater?

Jul 4, 2011

I have a similar problem to thread with same name dated 31-Jul-2010-that is now closed. I'm using Qwest internet with Actiontec PK5000, and I have to use my Netgear WNR2000v3 as a repeater.The Netgear is working as a repeater however I can't get internet through the LAN connections on the repeater. After checking the settings over and over again I'm beginning to think the repeater will only work with wifi. I need to hook up my desktop in the office, DirectTV, and Blueray player LAN connections to my repeater.

View 1 Replies View Related

How To Install Netgear N600 As Wireless Repeater To Linksys EA2700

Nov 24, 2012

I am having trouble setting up my Netgear N600 dual band wireless router as a repeater to my Lynksys EA2700 (main wireless router).

I am doing this because the main wireless router is in the "Man Cave," as I am a girl- I call it simply "The Cave." Anyway, the range on the N600 is supposed to be great. But from where it sits to where I sit and use my laptop or tabel is about 250 feet and goes through about 5 platered walls- so super thick.

View 2 Replies View Related

Linksys WRT54G Router / Configure A Repeater For A PPPoE Connection?

May 3, 2011

I am using a PPPoE connection using a linksys WRT54G router (working perfectly) and am now trying to set up an Edimax EW-7206APg to extend my wireless connection range. I followed the instructions given on the Edimax manual, and while my devices (iPad, laptop) got connected to the new repeater network, I could not access the Internet from it. I may be wrong, but the instructions on the Edimax manual seemed to be for a DHCP connection. Is there anything different I need to do to configure the Edimax repeater on a PPPoE connection?My router IP ("Local IP address") shows 10.10.0.1 instead of the "192.168.1.1" that all the documentation online seems to suggest.

View 6 Replies View Related

Configure Netgear Router To Samsung Blu-ray Player To Allow Wireless Connection?

Aug 23, 2011

How do i configure my netgear router to my samsung blu-ray player to allow wireless connection?

View 2 Replies View Related

Can't Connect To Wireless Router (WGR614 V9) Using Second Laptop

Oct 11, 2012

I have a Netgear wireless router(WGR614 v9) and im trying to connect a second laptop to it. The laptop is accessing the internet when I have it connected to my modem via Cat 5 Patch cable.When I detach the cable from the laptop and modem, it doesn't connect to the internet. I went through the whole installing with the cd that comes with the router but after I finish I get the same results.

According to System properties:

Microsoft Windows XP (theres a sticker on my laptop for Windows Vista)
Home Edition
Version 2002
Service Pack 3

Posted below is my computer info from using ipconfig.

Windows IP Configuration

Host Name . . . . . . . . . . . . : ******
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

[code]....

View 14 Replies View Related

Wgr614 V6 Wireless Router Only Allows One Device Or It Crashes?

Feb 3, 2013

I have a wgr614 V6 router, yes its old. I had 3 devices connected to it just fine before without any issues. But now It only allows my laptop, when I try to connect with my ipod touch or desktop, not only does it fail, the entire network crashes and my laptop loses it and its gone. It then takes about 2 minutes to come back up. So whenever I attempt to connect with another device the network crashes. so right now only my laptop is connected.I downloaded & updated to the newest firmware, did not work.I tried resetting the router, and made the network all over again, did NOT work.

View 7 Replies View Related

Cisco Wireless :: Install / Configure Another 1142 As Repeater?

Feb 4, 2013

configuring 1142 ap for using centeal dhcp.Now i try to install another 1142 as a repeater for first 1142 point. 
 
Here is root config:
   
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname 3floor

[code]....

View 1 Replies View Related

D-Link DIR-655 :: Configure To Join Existing Wireless Network As Repeater

Jan 29, 2011

I'd like to give my DIR-655 (rev. A4, firmware 1.32) to my brother for use as a repeater, to work with the weak signal in his apartment.  But I don't see any way to configure the device to join an existing wireless network.  Am I wasting my time?

View 7 Replies View Related

How To Use Netgear WG602v3 Hub As Repeater

Jun 16, 2012

I have a Netgear WG602v3 that I would like to use as a repeater. In other words can I establish a wireless bridge with the router that the local internet company provided?

View 1 Replies View Related

Netgear DGN2000 - Repeater Will Not See NAS?

Aug 29, 2011

I have a Netgear DGN2000 which I use as my main router/modem. This is ADSL and works perfectly.I have added a Belkin F5Z0102 UK G Wireless ADSL Modem Router as a wireless range extender.It is connected to the Netgear via homeplug and works fine for connecting to the internet on all my gadgetry (ie internet radio, netbooks and mobile phone) via wireless and wired.My problem is when the internet radio and music player on my phone try to connect to the NAS, connected via ethernet cable to the Netgear router.I can connect to the NAS via it's IP address directly but it will not be recognised by the software on the radio or phone.However,if I connect to the Netgear router (first), it recognises it straight away.

To allow access, do I need to change the settings of the router to point to the other router in any particular way?I have specified the second router as 192.168.0.2 and this points back to the Netgear router in the settings. The SSID is different to the first because if I put it as the same, the router gets confused and I lose all connectivity. I have also disabled the DHCP settings ont he second router. Forgot to mention that it is set up as a 1483 Bridge.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved