Networking :: WZR-HP-AG300H / DD-WRT Incoming And Outgoing Logs Still Empty After Enabling V24sp2

Apr 11, 2012

I'm having a difficult time getting the logging mechanism to work on my DD-WRT Router. I've gone through all the accepted methods for enabling logging: Seems there're others having issues too, but no answers: URLS

Specs:
Router Model WZR-HP-AG300H
Firmware Version DD-WRT v24SP2-MULTI (11/20/11) std - build 17798

I investigated a little further on the router. I enabled ssh, logged in, and found the log the firewall reports too. So I know the logging is performed, it's just not linked up to the incoming/outgoing log web page. Here's the log:

Using username "root".
DD-WRT v24-sp2 std (c) 2011 NewMedia-NET GmbH
Release: 11/20/11 (SVN revision: 17798)

BusyBox v1.19.2 (2011-11-20 17:24:36 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

root@rome:~# cd /tmp/var/
root@rome:/tmp/var# ls
lib lock log openser run snmp spool tmp
root@rome:/tmp/var# cd log
root@rome:/tmp/var/log# ls
[Code]....

View 1 Replies


ADVERTISEMENT

Port Forwarding Working For Incoming Traffic But Not Outgoing?

Feb 6, 2012

I have a licensing server. Other computers need to turn on a program, they send a message to the licensing server, and it responds that they have permission to run.Until today the licensing server was plugged into its own ethernet wall socket and configured with a static IP address. Today I put a router into that wall socket and now the server's plugged into the router.The router (WRT-54G) was set to the static IP - and now the internet on its network works. I set all ports to be forwarded to the server's internal IP address - and now my programs can detect and ping it. But now the server won't send back permissions to use licensed software, or even reply with a list of the software which it can license.

View 1 Replies View Related

Linksys Wired Router :: BEFSR41 V4.3 Won't Log Incoming Nor Outgoing

Jul 15, 2010

I went a bought a brand new model V4.3. I had trouble installing it right from the word GO, but I did successfully get that acomplished, how ever one of the important features "logging of incoming and out going ip" won't work at all. I tried deleting the old logview.exe and rebooting  everything, then installed the "new" logviewer.exe. Well absolutely nothing happens. I have double and triple checked the setting in the router...logging is turned on,  the computer which has the logviewer.exe installed is the confirmed network ip i.e. 192.168.1.101 and I can and do access the internet and all other computers on the network from that computer.

View 9 Replies View Related

Cisco WAN :: 1841 How To Log Incoming And Outgoing HTTP Request

Dec 12, 2010

I have a CISCO 1841 ROUTER and sins short our internet speed has decreased dramatically , it does not happens all the time , so I am sure it is not the ROUTER.I have put a small router (CISCO WRT 610N) and it was the same.When I look to the UP and DOWNLOAD GRAPH from my ISP , I see really BIG peeks.

View 2 Replies View Related

Linksys Wireless Router :: WRT160N Can't Hear Any Incoming / Outgoing Sound

Feb 12, 2012

I have a WRT160N router (firmware 1.53.0) that is connected to my broadband. It is giving me problems with VOIP/SIP Traffic.My SIP client connects fine and makes calls, but I cant hear any incoming/outgoing sound. The SIP client works fine when connected directly to broadband. I tried DMZ and that didn't work. Disabled SPI and that didn't work too.

View 2 Replies View Related

Linksys Wireless Router :: Incoming / Outgoing Logging Broken On E2500 Firmware

Jun 20, 2012

Have a few of these routers internally as well as at various clients.  The incoming and outgoing logs show up blank, even when there are 10-20 computers using the Internet and I know there is traffic being generated.  DHCP and security logging still works fine.  I also have a few E1200s on the latest firmware that are logging just fine... I'm just having issues with the E2500s.

View 6 Replies View Related

Cisco Firewall :: ASA 5520 / Monitor Largest Outgoing And Incoming Traffic Per Ip In Real Time?

Mar 4, 2013

We have a Cisco ASA 5520 and im looking for a way to monitor largest outgoing and incoming traffic per ip in real time so to know which of my internal computers are using the most of our Internet Line. Is there a way to this through ADSM ? We use version 6.3.

View 1 Replies View Related

Default Gateway Came Up Empty

Feb 8, 2013

I am having issues playing certain games on my ps3. So I've been searching for solutions and I came across a video that wanted me to go to run/cmd/ipconfig. I have little knowledge of computers but I'm not sure that what my ipconfig is showing is supposed to be there. At first I googled and learned about ipv6 addresses because i found that weird but i think that checks out fine. I then googled about the weird numbers and letters in my default gateway and came up empty. Is there a reason thats there?

View 3 Replies View Related

Cisco :: All Devices Isn't Empty In LMS 4.2

Jun 3, 2012

after upgrading from Prime LMS 4.1 to 4.2 (Windows version) the "All Devices" group and all the other system defined groups are empty.
 
The "Inventory dashboard" shows 397 reachable devices which is correct. I can access the devices when I type the name into the search field in the upper right corner of the LMS page.
 
When I open a device selector (e.g. from the "Device Management" tab) all system defined groups are empty.
 
When I make a new user defined group with the definition "IP address contains '1'" I get a group with all devices.

View 8 Replies View Related

Network Places On Windows XP Is Empty

May 26, 2011

my network places on winXP is empty when i 'm in lan with 14other pc using a switch.

View 1 Replies View Related

Cisco :: LMS 4.0 - Empty Device Selector?

Oct 9, 2011

Allthough we see all our devices in Inventory Portlets, we cant access devices via device selector neither in CM, RME, DFM ...OGSserver is running?

View 2 Replies View Related

Cisco :: LMS 4.2.1 Net-config Job CLI Output Empty

Jul 18, 2012

I have run a netconfig jobs in LMS 4.2.1 with these settings: [code] After running the job the "Device Details" of the jobs say "Successful Devices" for all three switches:"Deploy successful (Primary Login Succeeded   / Primary Enable Succeeded  )" For the devices switch-1 and switch-2 I get the desired output: [code]. Why there is no output although the job is successful?

View 3 Replies View Related

Cisco :: Resetting LMS 3.2 Data To Empty

Jan 29, 2013

I would like to empty my LMS 3.2 DB and re-discover all of my devices again.  What is the best way to do this besides wiping the software and reinstalling?           

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 - Command Set Is Empty

Jan 15, 2012

I have a problem with the ACS 5.2 configuration: I am trying to use the AAA authorization to centralize privileges and commands but only the privilege level is sent to router, the command set aren't sent.
 
The test cenary is this:
 
ACS 5.2Router 2900 family IOS 15.0 
The ACS is configured with:
 
Shell Profiles (to match with a privilege level), Command Sets (with the command list), Service Selection Rules (to set to one service) and Authorization (to assign one shell profile and one command set).
 
The router is configured with the follows commands:
 
[code]....

View 4 Replies View Related

Outgoing Server Is Not Found?

Dec 15, 2012

i want to setup mu outlook but my sent items is not sending pop up keeps on saying my outgoing server is not found .

View 1 Replies View Related

Networking :: Wireless Networking On MT3707

Oct 23, 2011

I recently installed a very basic version of XP on my old laptop (Gateway MT3707).After hours of searching for the correct drivers, I found them, and installed them. After installing the correct drivers for wireless internet I was able to pull up the list and find my network on it.When double clicking on our wireless network it asks for a network key (also called WEP key or WPA key).Now we have a password for our network, but after an exhausting amount of tries that won't work. I not sure if that is what its looking for. In our apartment we run mac OSX, windows vista, etc., but usually the password for the network is satisfactory. I have never ran into this problem.I hate to be a noob, but I don't know where to go from here.

View 6 Replies View Related

D-Link DIR-655 :: Access Control Name Cannot Be Empty String

Feb 26, 2008

When attempting to configure access controls from the advanced menu I enable the access control checkbox. I then follow the configuration wizard completing each step as directed by the wizard. When I complete the wizard and try to save the rule I get the following error message regardless of how I complete the wizard. "Name can not be empty string". Yes, cannot is misspelled in the message. I have tried every combination of choices in the wizard and many combinations of naming the rule to no avail.

This did work properly on a previous firmware version, probably 1.04 or 1.05. I have not tried back loading to the previous versions to see where it did or did not work. I don't know how well the router goes back and don't really care to reload all the settings again by hand if the automatic recovery doesn't work.I want to use this feature to control what hours certain machines on the network have access to the internet.

View 15 Replies View Related

Cisco :: LMS 4.1 User Defined Groups Empty?

Jan 23, 2012

I have seen some discussion in the forums regarding user defined groups being empty in LMS 4.0 but not 4.1.  I am having this issue in 4.1. Under User Defined groups, I have created 2 logical groups named "Physical Location" and "Switches".  These do not contain any actual devices, they are just containers for other groups.  Under the Physical Location logical group I have created 2 other groups, Acuna and Hampton.  Under the Switches group I have also created 2 groups, HDM and HHC.  The criterion for the Physical Location group is based on the first 3 characters of the hostname:
 
Device.System.Name startswith "hdm"
 
The criterion for the Switches group is based on the value of a user defined field, Admin_responsibility:
 
Device.Admin_responsibility equals "HDM"
 
The Physical Location groups work - the Switches group does not.  Both the HDM and the HHC group should contain several devices.  The HDM group contains 2, the HHC contains none.  If I edit the groups and click "next" until I get to step 3, Membership: Edit, the "objects matching criteria" list is fully populated - it contains the devices that it should contain.  However, after I click "Finish" and go to Inventory => Add / Import / Manage Devices there is no change in group membership - the HDM group contains 2 devices and the HHC group contains none.

View 4 Replies View Related

Cisco :: LMS 4.2.1 - Legacy Menu Is Completely Empty

Jun 13, 2012

After an upgrade from LMS 4.2 to 4.2.1 Legacy menu is completely empty. Is it a bug? If it's empty, how to get to some of DFM options (like rediscovery, discovery status etc.) They seem not present in "Site map".

View 4 Replies View Related

Cisco :: Show IP SLA History Empty - ASR1006

Aug 29, 2012

I want to do something with IP SLA and started by estabilishing a baseline.
 
I'm trying to check history on an ASR. I tested same config on a 3845 and was forgetting the "history filter all". After this I could see history table on 3845 but still history is empty on the ASR1006. The operation started because I can see information with "show ip sla statistics".
 
know if i missed something or maybe this is not supported in ASR1006?
 
re-ld-tcc-02_ASR1006#show vers
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.2(1)S2, RELEASE SOFTWARE (fc1)

[Code]......

View 5 Replies View Related

Cisco Firewall :: ASA 8.3 Outgoing NAT Not Working Right

Jul 11, 2011

We recently upgraded our ASA to 8.3, most everything went ok, but I am having problems with outgoing nat. It seems that when one our systems that needs to be natted to an outside IP address when connecting out is not doing it. When that system goes out the ip address is our internet IP and not the natted address, however, inbound everything works.
 
We have one rule that does PAT
 
nat (INSIDE,OUTSIDE) source dynamic OG_IP_NAT_DMZ obj-1.1.1.1This is the natting statement that should be translating the addressesobject network obj-10.200.0.10
nat (INSIDE,OUTSIDE) static 2.2.2.2I think I need to double nat, is that right if so how?

View 9 Replies View Related

D-Link DIR-655 Blocking Port 69 Outgoing

Jan 12, 2012

within ACS 5.3, I'd like to use 2 external authenticator for the same service, like vpn remote-access.For the authentication, I know I can create an identity chain, to query SecurID and then AD, in case of user not found in SecurID.For the authorization rules, I need to provider a wide vèn access for SecurID users and narrow vpn access for AD user.Are there some parameter to use in compound conditions for SecurID ?

View 1 Replies View Related

Linksys Cable / DSL :: WAG120N Empty Admin Page?

Dec 14, 2010

I have this problem since updating my firmware from 1.00.12 to 1.0016 (Annex A)
 
Problem: After leaving the router on for 1 day(dont know exactly how many hours), I tried logging in again on the admin page 192.168.1.1. Auth box appears, put username & password, but blank page after that. Tried using Safari/Firefox and it's the same. Router is working, all the LED lights are good, Internet is working, DHCP and all other config is normal. It's just that I can't access the admin page anymore.
 
When I power on/off the device, the problem is gone. Admin page is accessible again. But after some number of hours again, same problem blank admin page.
 
Does it has something to do with the router config like g.dmt/dsl 2 ? 

View 9 Replies View Related

Cisco WAN :: 877 / Setup A PPP Dialer To Present Empty Credentials?

Sep 7, 2011

I am trying to copy a setup from a Nortel IAX100 where the carrier provides two ATM PVC's over ADSL - one for voice (VoIP) and one for data (IP). Relevant lines from the backup of the IAX's configuration include the following for the PPP authentication over the voice circuit:
 
<wan_8_32>
<entry1 vccId="1" conId="1" name="Voice" protocol="PPPOE" encap="LLC" firewall="enable" nat="enable" igmp="disable" vlanId="-1" service="enable" instanceId="1509949441"/>
</wan_8_32>
<pppsrv_8_32>
<ppp_conId1 userName="" password="" serviceName="" idleTimeout="0" ipExt="disable" auth="auto" useStaticIpAddr="0" localIpAddr="255.255.255.255" />
</pppsrv_8_32>
 
The null username and password for the PPP connection have me a bit stumped.  Does the PPP connection not use any authenetication at all?  (Is that possible/likely? How could I deubg it?)  Or does does the IAX100 supply a chap/pap response with null credentails?  (If so, how would I duplicate that using an instruction to a dialer interface?I am configuring an 877 with 12.4T and advanced IP services.

View 11 Replies View Related

Cisco VPN :: 2811 Showing Crypto Map As Empty And No SA Shown

Nov 16, 2011

I replaced old cisco router 2811 with new one 2921 , all works except crypto map VPNs routers can ping each other , ACLs are not applied to outbound interfaces show crypto isakmp sa is empty after i make same configuration on a new router 2921 config.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 Command Set - How To Authorize Empty Arguments

May 19, 2011

after switching from a very old ACS 3.2 to ACS 5.2 I'm wondering on how to specify an empty argument in a command set.
 
Example:
 
I want to permit:
write 
but I don't want to permit:
write terminal
write erase
write network
write core
and so on.
 
If I specify command="write" and leave the argument field empty, every argument is allowed. This would also permit "write erase" what I don't want.
 
In ACS 3.2 I could specify command="write" and argument="^<cr>$". This does exacly what I want. The command write with an empty argument is allowed. If there is any argument, the command is denied.
 
In ACS 5.2 if I enter the same string in the argument field, the "<cr>" is filtered out and in the config is now only the string "^$" which is not working.
 
how to specify an empty argument?
 
BTW: ACS View shows only [ CmdAV=write  ] in the logs...

View 3 Replies View Related

Cisco AAA/Identity/Nac :: 2960 / CNA / Sending Empty Commands?

Dec 30, 2011

while working with Cisco's CNA (Cisco Network Assistant) on a 2960 switch, any change done by this tool is sent out as an empty set of commands, to a TACACS server to approve.
 
I have 2960 switch, a PC with CNA on it and brand new ACS 5.2. This switch is set up for TACACS+ authorization. While working with TELNET/SSH, all commands are authorized properly. When doing "debug aaa authorization", you can see the commands are being sent to a TACACS server (as expected) for approval. And what is more important – within the debug output every command appears at "AV CMD= …" and "Arguments = …" Those commands seen by the ACS and approved correctly.But, when working with CNA, those fields (i.e. av cmd and arguments) are empty in the first place. Hence all what ACS does see are "empty commands" and no clue for the correct ones (say, changing interface's description). The HTTP server has it set of authorization commands.

View 6 Replies View Related

Cisco :: LMS 4.0 Device Credential And Repository Showing As Empty?

Jan 16, 2012

I have a case for an LMS 4.0 running in a Live environement (With devices already discovered and organized into seperate groups), where the Device Credential and repository DCR is showing suddenly as empty and only i can see the groups listed, but without any devices in them (Through Inventory > Device Administration > Add/Import/Manage Devices).After a restart of the whole LMS server a few weeks ago, the problem was fixed and the devices appeared again, but now the same issue re-appeared.

View 5 Replies View Related

Cisco :: Which Source IP Will Router Use For Outgoing ICMP

Jun 6, 2012

I have router which has two physical interfaces Gi0/0 and Gi0/1. G0/0 connects to metro over ethernet and Gi0/1 is configured a s router on a stick, which has many defined. All those interfaces have IP addresses assigned. EIGRP is configured between other metro sites. Here is a sample IP assigment for this site, let's say Site.

View 3 Replies View Related

Cisco :: E1-CAS With E1 Controller On 2811 - No Outgoing Calls?

Nov 8, 2012

I have programmed two E1 ports on Cisco 2811, one for E1-PRI and other for CAS. My running-config is as below

controller E1 0/0/0
framing NO-CRC4
clock source internal
ds0-group 1 timeslots 1-15,17-30 type r2-digital dtmf dnis

[code]....

I have made 4 as trunk group access on the PBX for E1-PRI and 8 as trunk group access for E1-CAS.I am able to dial 4-1-6261 to place calls on telephone 6261 from 6000(outgoing and incoming over PRI). And I am able to dial 4-2-6261 to place calls on telephone 6261 from 6000(outgoing on PRI and incoming on CAS).But I am not able to dial out from my PBX extensions over the E1-CAS card using 8-1-xxxx or 8-2-xxxx. I have patched two PBXs back to back on their E1-CAS ports and am able to dial out using 8-xxxx. So this means the trunk group allocation on PBX is working fine. The show controller e1 0/0/0 is showing normal stats.When I do a show voice port 0/0/0:1 I see that one of the ds0 timeslots are being seized when I try to dial out on 8-x-xxxx but the Out Status column entry against the timeslot says clear_bak.When I am placing calls on PRI, I don't see any such indication against the timeslot being seized.Basically since I am able to dial in to my E1-CAS port, the line coding, framing, signaling(to some extent) must be right, or so I guess. But am not able to dial out.

View 1 Replies View Related

Outgoing Connection Attempt After Online Banking

Mar 2, 2012

Something a little odd happened the other night. I had spent the afternoon updating all necessary programs where updates were available, did a GRC shieldsup test, did a clean and test of my system with AVG and MBAM. Everything looked fine.I went online that night however and as soon as I went to my online banking website, I noticed that there was an outgoing attempt logged in my firewall (ZoneAlarm). It was blocked. The IP address is 72.167.239.239:80 - which apparently fits in GoDaddy's IP range. Googled it and saw that someone else had the same issue.

View 2 Replies View Related

Static IP Splitting Off To Outgoing Devices Via Router?

Aug 13, 2012

Trying to split a supplied fixed IP address to multiple wireless devices so that I can piggy back on the internet connection in my office. Cause the IT dept refuse to provide a router.I plank to use a router for the job above.

View 4 Replies View Related

Get Outgoing E-mails To Be Registered On Outlook Server?

Mar 19, 2013

how I could possibly get all my e-mails of which I send my clients through my outlook to be registered on my Home-outlook, Office-Outlook and my mobile-outlook? like on the server? something similar to when you open yahoo or G-mail from any given location you can view your sent Items,inbox etc.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved