One Router With Multiple Incoming Internet Connections?

Mar 16, 2011

which product has the capability to receive multiple incoming connections

View 1 Replies


ADVERTISEMENT

1 MAC Filter Entry - Multiple Internet Connections By 2nd Router?

Jan 19, 2013

We have a network, with a MAC filter for the internet acces. Every body can just have one MAC adress entry on their name for internet acces . My idea was to give the MAC adress of another router(that i can control), plug the LAN cable in the WAN of the second router, and then connect more computers to that router. Would that enable Internet acces for all the computers behind the 2 router?would it work if i make one computer with an extra network card, register that computers MAC adress and forward internet by the second network card to a router or other computer?

View 7 Replies View Related

Linksys Wireless Router :: E2500 Incoming Packet Loss And Dropped Connections?

Dec 23, 2011

I've been fighting with my E2500 since I got it back in June with lag, dropped connections, etc. It's a bit intermittent but can hang around for hours at a time when it kicks in. Restarts but the issue always comes back. Most noticeable while gaming online or on a VOIP program such as Team Speak. Generally when it happens If I'm monitoring my Team Speak connection the incoming packet loss shoots up between 20-30%, starting to drop out every other word or so. No out going packet loss. The connection drops are random between computers (I have one mac and one pc in the house) where one will be fine and the other wont, or when the whole system will stay connected and drop all transfer. In the case of this last one it's not my ISP's connection as any streaming happening between one computer and an Apple TV device will also cease. I've also swapped back to my old router (an older model linksys) and all problems have stopped. Fully rebooted and reconfigured the router about 3 or 4 times and am on the latest version of firmware (1.0.003). It was much worse on 1.0.002 but still very noticeable on 003. Also no difference with a different wireless adapter. I've tried the chat technical support but all they did was take 45 minutes to tell me how to reboot my router after telling them I already had.

View 1 Replies View Related

Use Multiple Internet Connections Together?

Jun 7, 2011

I have a two broadband (Indian standards) connections that I want to use together. One is a 1mbps and the other is a 512kbps. The config that I have is below.

OS: Windows 7
Laptop: Acer Aspire
Router 1: Buffalo AirStation WHR-G54S
Router 2: ZyXEL P-600

I read about it on a few boards but I couldn't find any proper info on that.

View 2 Replies View Related

Multiple Internet Connections Without NAT?

Dec 24, 2012

i'm trying to setup multiple internet connections however the ISP i am using doesnt allow the use of NAT. DHCP and uses the registered mac address as a way to authenticate the account. To compensate for no NAT i use a web proxy feature on my router.[CODE]

View 2 Replies View Related

Use Multiple Internet Connections At Same Time

Aug 6, 2012

I have laptop with windows 7 ultimate.i have two internet connection avalable...

1> wifi network of my office...which is protected by cyberom..so i cant open facebook and other restricted sites

2> internet through my android mobile...which is dialup connection or through usb tethering

i want to use office wifi for downloading via idm or other download manager and my mobile internet for social networking..or any idea i allow application to connect internet via perticuler network/way..

View 5 Replies View Related

Edimax Blocks All Incoming Connections?

Nov 5, 2011

i have with my Edimax router. I could not make any progress with Edimax personnel in Taipei.

If i connect my vista box directly w/o the router, i can see that port 21 (Filezilla) is open, using WhatsMyIP.org | Port Scanners/Sniffers

When I insert the Edimax br6215srg router, the port is in timeout as reported by aforementioned site (guess the port scanner gets no synack nor reset back to the syn it sends)

The router is set to "disable firewall" or to "enable firewall and DMZ enabled" with as client's ip the one that is configured in the router's dhcp table for the vista box. The NAT module is set to forward port 21 to the same ip. ipconfig confirms that i do get the ip programmed in the router's dhcp table.

I do not want to believe that this edimax box is unable to forward connections!

View 19 Replies View Related

Unable To Unblock Incoming Connections?

Nov 18, 2012

I recently moved house to a flat where I now have an adsl wireless router. Ever since I installed it its been major problems for me, my speeds are terrible takes ages to load a webpage and days to download anything. Also I have tried to stream to my apple tv through the use of airplay mirroring but this again doesn't work and an error code appears every time which I then looked up and it says its to do with my firewall blocking incoming connections. I have gone to my routers settings to try change this and it says to select the options by clicking the radio buttons however they do not exist on the page as you can see on the screenshot below.

View 1 Replies View Related

Cisco WAN :: 2911 With Multiple Internet Connections?

Jun 20, 2012

We are about to install a cisco 2911 router to replace a linux based router.
 
The Cisco will have 5 gig ports, 4 ports connected to DSL modems each modem connected to a different ISP, and the last port connected to a Cisco LAN switch.
 
802.1q will be used on the internal router port to split the LAN segments up into VLAN's as the building contains lots of different businesses.
 
Each customer in the building has there own servers and set of public IP addresses assigned e.g
 
Customer A - ISP 1      uses  81.34.65.78 NAT'd to 10.0.0.1 Vlan 5 port 25 (SMTP)
Customer B - ISP 2     uses 217.23.67.87 NAT'd to 192.168.1.1 Vlan 6 port 25 (SMTP)
 
and so on
 
The outbound traffic also needs to go out of the correct DSL line which ever has been assigned to that customer.
 
Am i right in thinking the only way to do this will be to use "Route Maps" ?? 
 
(IP addresses above are made up, or at least not ours)

View 17 Replies View Related

Combining Multiple Internet Connections For A Home / Office

Jan 26, 2011

do not have fast internet service so we must need to combine two or more different internet providers and get one speed kindly reply do you know any router/modem/switch which can do this for us.

View 2 Replies View Related

Combining Multiple Internet Connections For Home Network?

Jun 17, 2012

How to make 2 (or more) connections work together and increase your final download and upload.You will need the following items

- A PC or server connected at high speed that is greater or equal to both connections speed (from a data center, You can get some very cheap $30 a month, a VPS can be good enough)

- 2 Internet connections at your home (DSL + cable for example)

- A router that supports dual WAN

- A Magic software that I can write for example

So what is needed is a way to split your data using some technology like the concept of RAID 0 (MAGIC software will be here used) and then use both IPs through the router to send the data to the server which will handle your request (it is possible to have a good usage of VPN here to forward all your traffic to the server without worrying about doing much work here). After that on the server you can reverse your RAID 0 data (using the same MAGIC software) and forward your request to the destination site that you want to visit. Same way the downloading will happen when the server receives a reply from the destination site, it will split the data using same RAID 0 technology (using the MAGIC software) and then send the data to both of your IPs. After that on your side you combine the received data (using the software) and you are done. Of course I do prefer the data splitting to happen using some hardware like a router with MAGIC software as it will be much more effective.

View 3 Replies View Related

D-Link DIR-655 :: Blocked Incoming GRE Packet Preventing VPN Connections

Feb 1, 2011

I've been fighting with getting VPN connections working properly with my Dlink router. I set up virtual servers for PPTP and L2TP and could usually get the first attempt to work. Subsequent client connections would always fail.The logs display the following-Dropped GRE packet from 192.168.0.10 to 64.232.xxx.xxx as unable handle packet header. Blocked incoming GRE packet from 64.232.xxx.xxx to 76.105.xxx.xxx.What seemed to fix it was going to Firewall Settings and setting UDP Endpoint Filtering to Endpoint Independent and TCP Endpoint Filtering to Address Restricted.

View 1 Replies View Related

D-Link DIR-615 :: How To Route All Incoming Connections To Default To Web Server

Jan 3, 2013

How to configure my DIR-615 (Hardware Version E1 - Firmware Version 5.00NA) to:

1. Assign/Reserve IP address for 2 machines.

2. Route a web browser to a server on the first machine (port 80) as a default when another computer or smart-phone or device joins my open wireless network.

I am hoping to eliminate any changes to the IP address of the first two computers so that the server's IP address and port are static. I would also like anyone who joins the network to merely open their browser and be presented with the http interface from my server.

View 2 Replies View Related

D-Link DIR-655 :: Make Computer Support Incoming VPN Connections?

Jan 27, 2011

I am trying to make my computer support incoming VPN connections.  I am using Windows 7 Home Premium on the computer I want to make the connection on.I am also using Verizon FioS internet (comes with default router/modem combo) to which I have the DIR-655 router connected.  I am able to connect to both WiFi's fine and they work correctly.I think the Verizon router is set to block incoming VPN connections and I think this is why I cannot get anyone to be able to access my computer / internet via VPN. How I can perhaps forward ports and which settings I would need to specifically change in both routers admin settings so that I can get VPN connections to forward to my computer and be accepted.

View 1 Replies View Related

Cisco Firewall :: ASA5550 Way To Block Incoming Connections From TOR

Nov 29, 2012

I need to block 4000 nodes (Ultrasurf, TOR exit nodes) and I've written a script that will ssh and copy in these objects (prob 100 at a time) into an object group and then put a blanket deny.  I don't see a flood of traffic (occassional hits every other day, etc) but I was wondering what the impact would be?  Can the ASA handle an object group of that size plus an ACL with it?  Any way to block incoming connections from TOR/Ultrasurf?

View 1 Replies View Related

Cisco WAN :: Set Up 3745 To Forward Incoming Connections To Server?

Mar 2, 2012

I have a Cisco 3745 that is my internet router, I have a domain that directs the web address to the WAN IP address...Can I set up my 3745 to forward incoming connections to my server?

View 3 Replies View Related

10.6.5 Application Master To Accept Incoming Network Connections?

Jan 15, 2011

In OS X 10.6.5, the following dialogue popped up:.Do you want the application "master" to accept incoming network connections?

View 3 Replies View Related

Protocols / Routing :: Cisco 2911 Configure Incoming Connections

Dec 19, 2011

We have a Cisco 2911 Router and have configured via BT Infinity Broadband for out going internet access etc. Are there any incoming restrictions ACL settings etc. that will stop us using for ISA VPN, Exchange connections, Intranet, Sharepoint etc. We have reserved 13 Static IP Addresses from the ISP.

View 1 Replies View Related

Security / Firewalls :: Review Incoming Remote Desktop Connections Historically?

Apr 20, 2013

I was at my computer when the desktop appearance and taskbar changed. I immediately opened task manager to see what program might have caused this and didn't see anything out of the ordinary. Then about 2 minutes later my desktop changed back to what it normally is. I then went and disabled remote desktop connections... I think that someone may have accessed my pc remotely, buy I wasn't able to catch them at it. Is there any way to review incoming remote desktop connections historically?

View 3 Replies View Related

Router Which Will Allow Multiple Connections?

Nov 14, 2012

I am trying to find out the availability of a router which will allow multiple connections, each with their own username and password and the ability for an administrator to control access.

View 2 Replies View Related

Belkin Router With Multiple Ethernet Connections?

May 1, 2012

I have a belkin router that I've been using to share internet connectivity with several devices around my home. It has happily supplied this to an Ethernet connected desktop, Ethernet connected Blu-ray player, and wireless connections to two seperate laptop computers. When I try to add one more Ethernet (wired) connection to the mix, I always run into problems. Although the router has 4 outgoing Ethernet ports, it doesn't like to do more than two. Should I buy a new router? Cables?

View 4 Replies View Related

ZyXEL (P-2601HN-F1) - Multiple Connections Disconnect Router?

Oct 17, 2012

We have a ZyXEL (P-2601HN-F1) router and three computers in our house. Currently, we only use cables to connect to the router because we haven't been bothered to setup wireless. However, there's a curious problem where the moment we connect more than 2 devices at a time, the router loses connection to the internet. To be precise, all LEDs are on, except wireless (d'uh) and Internet.

All involved computers run Win7.

View 1 Replies View Related

Cisco WAN :: 877 Router For Terminating Multiple ADSL2+ Connections

Jan 18, 2011

I need to look at options for terminating multple ADSL2+ circuits in the UK.Is it worth investing in a router to terminate multiple connections? Or do you think I could just use multiple 877 routers connecting to a good core multilayer switch?

View 1 Replies View Related

Cisco Routers :: RVS4000 - Multiple Internet Connections / Routers Sharing Printers?

Sep 11, 2011

I have 2 internet connections in my office one via Verizon Fios and another  one via the local cable company. On the fios connection I have an RV042 VPN  router and on the Cable company connection I have an rvs4000 router, I would  like to know if there is a way I can connect the 2 so I can share a printer I  have on one of the 2 networks from the other network without using the VPN  feature, like via an ethernet cable connected between the 2 and some kind of  static route maybe?

View 6 Replies View Related

Multiple Connections To A Machine?

May 17, 2011

I am working on a project at my company. In short, there is one PC in the office to which other user must remotely connect to perform certain tasks. The stuff they do must be done from the machine with the specific IP, the IP of that machine, as this is specified in agreements with the companies we work with. So far, we have been using Remote Desktop (our machines are Windows-XP-based PC's), but this is quite annoying when more than one person needs to use the machine at the same time

View 3 Replies View Related

Multiple Connections Via One Ethernet Port?

Feb 19, 2013

The ethernet ports across the entire campus including the halls all host multiple networks via one port. I connect to the port and I get one connection, and my friend connects to get a second connection through the same port, and a third person connected via the same port to get yet another connection. I think there may be 4 connections being hosted through this in total. Now, the university have 3 main streams of internet: 1 for Staff/postgrad, 1 for students, 1 for exchange students. The fourth connection type is intranet with only access to a portal. The purpose of the portal is to submit your mac address for wireless and ethernet to be assigned an IP address for both. The issue we are having is my friend needs to connect to the exchange students connection for actual internet access, but the ethernet cable will only connect her to the portal (all her details have been submitted). I have cycled through every window in the networking control panel and usually issues like this I can resolve within a couple of hours but how to identify other networks that are available through ethernet.

View 3 Replies View Related

D-link Dir-615 :: Multiple Connections On Wifi

Nov 6, 2011

When I connect 2 laptops to my router, why does the speed/connection get split? I would understand that if the speed was maxed out or something but it's a lame 500 kb/s connection. Do all wify routers behave this way? It's kind of annoying since there's a trafic quota limit implemented and when someone downloads, the other one can't do s^&t? how to handle this?

View 8 Replies View Related

Cisco VPN :: Multiple VPN Connections From A Client 4.0.5 (C)

Mar 22, 2011

I am using Cisco VPN client for windows 4.0.5 (C)I use the VPN client to connect to my office from home and to connect to a customer via their VPN connection.Is there any way that I can have these two VPN clients active at the same time instead of needing to diconnect one to connect the other ?

View 1 Replies View Related

D-Link DIR-601 / Multiple Connections With Wireless LAN Without Networking?

Nov 9, 2011

what I want to do is setup a Tablet for use and share my one Internet connection with it and my desktop. I do not want the desktop and the Tablet networked with each other. there is a Tablet on Newegg: Velocity Micro Cruz Reader R103. the details say it's communication is 802.11b/g Wireless LAN. so I copy and paste that on Newegg and get: D-Link DIR-601 Wireless Broadband Router. not sure if that's what i need or what the configuration would be but I kind of know how to set it up.my question is can I connect a Desktop and a Tablet or any PC device to a router like this with out networking the individual units with each other? just to where it serves as more a splitter. is there any wireless alternatives to only "split" the Internet connection and not network the desktop and Tablet?

View 3 Replies View Related

Route Connections For Multiple NICs Setup?

Feb 27, 2013

I have the setup as following on my PC:

[code]...

I use the fibre internet for almost all internet activities since the speed is fast.However, when I do school's stuff, I need to VNC to my lab's server. Hence I need to connect to school internet point. External IP cannot directly connects to my school's server.Therefore, I would need to force Windows (or VNC) to use the connection of the Wireless Ethernet card when I VNC to my lab's server. But I want to use my fibre for all other internet activities.

View 4 Replies View Related

How To Setup Multiple Ethernet Connections In Windows 7

Jul 16, 2011

I have to connect/switch to two different ips different gateways, can I possibly keep two set of ips always ready.

View 1 Replies View Related

Cisco Switches :: SG300 And Multiple WAN Connections?

Apr 8, 2013

Currently I have my SG300 connected to a Wireless Router which is, in turn, connected to a Cable Modem.
 
I'm considering adding a second cable modem. Can the SG300 handle that?

View 3 Replies View Related

Disabling SSID Broadcast Creates Multiple Connections?

Nov 1, 2011

Everytime I disable SSID Broadcasting 2 extra wireless connections appear available connections list. (See wirelessconnections.jpg) One is blank and one is labeled Other Network. They disappear when I enable SSID Broadcasting. I am not sure why this is happening.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved