Port Forwarding With ZyXel Q1000 Modem And Trendnet TEW-452BRP Router?

Dec 30, 2012

I am trying to allow an external website access to my http://localhost:8080. It is a trusted website.

I have a ZyXel Q1000 modem and a Trendnet TEW-452BRP router. The TRENDnet is serving a PS3, Xbox, Wii, and 2 iMacs and the ZyXel is serving the TRENDnet.

My public IP for the ZyXel is 65.xxx.xx.152 and it's IP address is 192.168.0.1 with a range of 192.168.0.2-254 My TRENDnet IP is 192.168.1.1 and a range of 192.168.1.100-199

I have setup a Virtual Server on the TRENDnet using HTTP, Protocol TCP 80/80 and LAN Server 198.168.1.109 (my iMac localhost). I have also setup Application forwarding and Port forwarding on both the modem and router (at different times, trying to resolve this).

Naturally none of those worked. I don't know if I need a Port forwarded or Application forwarding or the Virtual Server. Also don't know if either of those need to be on one or both devices.

All I do know is to access my localhost from the Internet, all I need to do is put http://65.xxx.xx.152 in the address bar of a browser outside my network, and my modem/and or router should forward the request to my iMac and my localhost:8080.
But every configuration I have tried does nothing of the sort.

View 8 Replies


ADVERTISEMENT

Zyxel P-660HW-T1 Don't Find Port Forwarding In Modem Configuration

Oct 9, 2011

I vave a zyxel p-660HW-T1 v2.I need to do PORT FORWARDING since I want to use an IP Camera in order to have remote access to video.I do not find PORT FORWARDING in the modem configuration. I find NAT, but not port forwarding.

View 1 Replies View Related

Protocols / Routing :: Port Forwarding On Actiontec Q1000?

Jul 15, 2012

I have my internet through CenturyLink which is a DSL connection running on an Actiontec Q1000 on a Windows 7 set up. I'm trying to run a subsonic server on my computer to stream my music collection. It was all working beautifully until I had to switch to this modem from my previous. Now, when I go to canyouseeme.org, it can't see that 4040 and 8080 are open. They need to be for subsonic to work? I've tried to set it up as portforwarding

View 5 Replies View Related

Zyxel Pk5000z - Port Forwarding For Multiple Computers On Same LAN?

Jun 15, 2012

I don't know if I'm saying this right but, I have two computers in my LAN hooked up by a Ethernet cables to my modem/router zyxel pk5000z we were using theses computers to play together using Game Ranger. We were having some problems connecting to game rooms with a symmetric NAT. When the port forwarding did work it would only let me open ports for one ip adress for 1 computer it seemed. How do you open ports for all computers on your LAN?

View 1 Replies View Related

Port Forwarding With Router And Modem?

Oct 29, 2012

I have tried everything possible with this modem and router. I cant figure it out. I tried the router in bridge mode, tried opening the ports up on both of them.

View 14 Replies View Related

Westell Modem Port Forwarding On Linksys Router

Nov 30, 2011

I have at&t DSL with Westell Modem/Router in Bridge Mode and Linksys Router connected. The internet is working fine, but I'm unable to forward ports on the Linksys Router. The ports are 80 and 37777.

View 1 Replies View Related

D-Link/DIR-825 :: FIOS Router / Modem - Way For Port Forwarding

Oct 23, 2011

I'm trying to configure port forwarding for FTP but in my case it isn't as simple as i assumed ... i have an actiontec router/modem that serves as incoming internet from my provider (FIOS), which i connected to my own router (dir-825). i mainly configure my network on the dlink and leave the actiontec alone.

[CODE]...

View 13 Replies View Related

How To Connect Trendnet Wireless Router To Att Dsl Modem

Nov 14, 2011

Have lost the instructions on how to connect my TRENDnet wireless router to my att DSL modem, not sure if I have all the cords that I need.

View 1 Replies View Related

Linksys Wireless Router :: Port Forwarding With E4200 And 660 Series Modem?

Oct 17, 2011

I have a e4200 router, And a 660 series modem, I'm trying to portforward for a game called minecraft, I cannot seem to get the ports to open, I've called Century link they told me to put my modem in to bridge mode, So I did they said my IP should be public not private now, It is still private

View 6 Replies View Related

Cisco EPC 3000 Cable Modem / Airlive Wt-2400r Router - Port Forwarding?

Jun 15, 2011

I'm currently using Cisco EPC 3000 cable modem and Airlive wt-2400r router. Afaik the cisco isn't a router, but i'm still having some weird problems with forwarding and apparently even DMZ wont work .

View 10 Replies View Related

Protocols / Routing :: Port Forwarding Minecraft - Qwest Modem / Linksys Router?

Oct 1, 2012

port forwarding this im trying to setup a minecraft server with bukkit and i tried a number of things to port forward and it won't open port. I have a tomato firmware linksys router and a qwest modem.

View 1 Replies View Related

Port Forwarding - Router Belkin F5D7234-4 V5 And Modem Motorola 2210-02-1006

Apr 3, 2011

I've been trying to port forward my modem and router for Xbox 360 live. Only problem is, I know absolutely nothing about networking or configuring modem / router settings.Anyhow, I was told to put my modem into Bridged Ethernet mode. I tried, then I couldn't even connect to the internet anymore.my router model is a Belkin F5D7234-4 V5. My modem is a Motorola 2210-02-1006.

View 14 Replies View Related

Actiontec Q1000 Modem - Can't Connect To Secure Wireless Networks

May 10, 2011

So we just got a new router for our higher speed internet. The modem is an Actiontec Q1000 from Qwest. We used to live out in the middle of nowhere, so we never needed to secure our internet. Now we live close to neighbors and we need to encrypt the wireless. When I try any encryption, however, I can't connect at all. I have tried temporarily having it unlocked and I could connect without a problem. It also works fine when I'm using my Ethernet cord.

Heres my IPCONFIG.

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Owner-PC
Primary Dns Suffix . . . . . . . :

[code]....

View 1 Replies View Related

ZyXEL Modem / Router Does Not Detect Ethernet Cables

Jul 28, 2012

My ZyXEL modem/router does not detect my ethernet cables. it has one that runs to the main computer and i have a cable connected to my xbox. the light does not turn on when i try to use the internet for my xbox and the xbox does not detect ethernet. the other port works fine for the computer.

View 1 Replies View Related

Open UDP Port 16000 In Router Zyxel MAX 206 M1R?

Nov 3, 2011

how to open UDP port 16000 in my router Zyxel MAX 206 M1R...when i tried to start AGE OF EMPIRE 2 THE AGE OF THE KING in gameranger it says that my UDP port 16000 is not opened...so i am trying to open it..

View 2 Replies View Related

Netgear WRG614 - Port Forwarding From Modem But It Doesn't Work

Feb 26, 2011

I have a Netgear WRG614 and a Westell 610015 Modem. I need Port Forwarding. I have tried setting up a static IP then Port Forwarding but it doesn't work. I have tried port forwarding from the modem but it doesn't work. I wanna forward ports "80, 9958, and 5816". The reason is because I am gonna host a game server on my computer.

View 14 Replies View Related

4-port Zyxel P334U - Local DHCP Router Setup

Apr 26, 2011

I have a 4-port Zyxel P334U with WLAN, and I would want to set it up so that besides normal WAN, each connected computer also has access to the other local computers. I've tried setting it up before, but haven't managed to get it working, so I gave up.I have DHCP set up, beginning at 192.168.1.16. WAN and ISP DHCP works, so each computer has a local IP (192.168.1.x) and a remote IP given by the ISP.

View 6 Replies View Related

Cisco Switching/Routing :: 881W - IOS Port Forwarding Commands For Port Forwarding

Apr 7, 2013

I am trying to open up port 32400 on my 881w Cisco router but I have not had any success I need to configure manual port-forward to enable my Plex Media server.

View 1 Replies View Related

Zyxel P660H D1 Modem - Internet Very Slow

Aug 26, 2012

I bought a new modem (Zyxel P-660H-D1) few weeks ago and since then my internet has been alot slower than before. When i start up my computer, it isn't actually that slow at first... it starts getting slow after around 10-20 minutes. I also started getting bluescreens from time to time. My downloads aren't that much slower then before, but loading internet pages is painfully slow and online games are lagging alot. This is also happening with my xbox360, so I don't think it's my computers fault. With my old modem (Telewell EA-501) I was getting around 6Mbps, but with the new one its only around 1-2Mbps. My ping is also very high (around 400ms) and I have some packet loss. My jitter is 200ms.

View 1 Replies View Related

Host Website With Apache HTTP Through ZyXEL EQ-660R Modem?

Dec 21, 2010

Essentially, I have a spare desktop computer I'd like to turn into a web server, but my modem and wireless router are very difficult to work with. I installed Apache HTTP and successfully hosted a test page which can be accessed anywhere on the LAN. However, I'm having trouble setting up the server to be accessed from my external IP address.

I was supplied with a ZyXEL EQ-660R DSL modem by my ISP (CenturyLink) and bought a Netgear WGT624v3 wireless router in which to connect my laptop and spare desktop.

ZyXEL's website is not useful, and I don't think much of the problem is with the Netgear router. I've played with many settings and have tried to forward port 80 from the modem, but I've had no luck.

View 1 Replies View Related

Cisco :: How To Connect A Catalyst 2960 Switch To A Zyxel ADSL Modem

Jul 19, 2012

I need to connect these devices:

- Some computers.

- A Cisco Catalyst 2960 switch (computers must be connected to this switch)

- A ADSL router Zyxel P-660HN-T1A with WiFi (the switch must be connected to this router)

In my company we have at least 10 computers which were connected to Internet using a WiFi connection. But now we need these computers connected to a wired line and this router has just 4 Ethernet ports which are not enough obviously. So we bought this 24-port Cisco switch to connect all the computers and I don't know how to connect it to the ADSL router and what configurations to set up in order to have access to internet in every computer connected to the switch.

View 2 Replies View Related

Cisco WAN :: How To Connect Catalyst 2960 Switch To Zyxel ADSL Modem

Jul 18, 2012

I need to connect these devices:

- Some computers.

- A Cisco Catalyst 2960 switch (computers must be connected to this switch)

- A ADSL router Zyxel P-660HN-T1A with WiFi (the switch must be connected to this router)
 
In my company we have at least 10 computers which were connected to Internet using a WiFi connection. But now we need these computers connected to a wired line and this router has just 4 Ethernet ports which are not enough obviously. So we bought this 24-port Cisco switch to connect all the computers and I don't know how to connect it to the ADSL router and what configurations to set up in order to have access to internet in every computer connected to the switch.

View 1 Replies View Related

Zyxel ES-105 - Port Is Not Opened In Online Gaming

Feb 16, 2011

To play one i game i need to open ports 7777 and 7778 , to do that i must access my router.When i connect to standard router ip192.168.1.1 it wont work. To solve my problem i checked the name of router and read the official support.My routers model is Speedtouch 546 v6. and at official faq the adress is given, but it still wont work, then i noticed i have second router i think, its used to connect 2 TV for my internet television, its model is Zyxel ES- 105 a , in official support , their given adress wont work.

View 14 Replies View Related

Linksys Wired Router :: Q1000 / BEFSR41- How To Connect Both Modems

Nov 9, 2009

I'm on a Mac running OSX.  Qwest (my ISP) recently swapped my DSL modem for an Actiontec Q1000 combo modem/router.  The Q1000 firewall is not nearly as configurable as my Linksys BEFSR41 (v3) router.  I'd like to use the Q1000 just as a modem and use my Linksys as my router so I can access it's superior firewall configuration.
 
How do I physically hook the hardware up?
 
How do I configure the 2 items.  The Q1000 uses 192.168.0.1 as it's web address.  The Linksys uses 192.168.1.1.  I have 2 Macs on my network, an iMac (OS 10.5.8) and a G4 (10.3.9).
 
Besides web browsing & email, I also have a torrent client I use (Azureus).

View 8 Replies View Related

Netgear Router Not Port Forwarding

Mar 27, 2011

Trying to connect to a computer on a client's network. He has a Netgear WGR614v9 router. I talked him through opening port 23 to 192.168.1.200. I have done this many times on other routers and it should have been simple but could not connect. Had him enable ping response so I could ping his router to verify the connection and ping was good. Tried my port scanner and only port 21 is open. Had client verify the port forwarding data and it is correct. Does he need to restart the router to enable port forwarding?

View 4 Replies View Related

Port Forwarding Through A Three Router Y Setup

Dec 25, 2011

I'm finally jumping in over Christmas break to set up a Y network with three routers. I run a side business repairing and cleaning viruses/malware from PCs and would like the business subnet not to be able to mix with (and possibly infect) the "home" subnet.Before I knew what I was doing, I set up a simple two router "chained" network by hanging an old SMC router off my main Airport Extreme router, but I've since learned that's not ideal, since the "work" network machines can see everything on the "home" network. So, here's what I want to do. I want to put the new third router right after my cable modem (ISP). I want to keep my Airport Extreme and all devices attaching to it (home subnet) off one LAN port of this new router and my old SMC router off another LAN port of the new router (the test subnet). Currently, the IPs are: [code]My concern in setting up a "Y" configuration is that I have some wireless IP webcams on the Airport Extreme that are using port forwarding (both UDP and HTTP) so I can view them from wherever I am on the Internet, not just from within my home network.

What's the best way to make sure the port forwarding from devices on the Airport Extreme subnet works through the "new" router and out through to the Internet? Do I have to open the same ports on the new router? If so, does anyone have an example using the addresses above? Should I just put the Airport Extreme in the DMZ of the new router (so everything is just passed through - or will that allow my test subnet to see the home subnet? Some other way?

View 2 Replies View Related

Port Forwarding With A Belkin Router?

Jun 7, 2012

Recently Brighthouse figured out that I was using the wireless router they gave me for actual wireless, and decided to shut it off and tell me I need to pay $100 to use wi-fi on the router. So instead, I went out and bought myself my own belkin wireless router, and plugged it into my old one. Now, I don't know if my old router was indeed a router or a modem. The cable from the wall goes into the older router (let's call that NETGEAR) and from there, an ethernet cable goes into the belkin one (we'll call that BELKIN). Before, when I was using the Wi-Fi on the NETGEAR, port forwarding worked fine, except for having to re-forward ports after my dynamic ip changed. Now, because of the BELKIN router, I can't forward anything? I went into the router management at 192.168.2.1 (for the Belkin), went to Virtual servers forwarded the port 25565 No one can connect to my Minecraft server, only when I plug my computer into my NETGEAR with ethernet (hardwire).

View 15 Replies View Related

Cisco WAN :: Port Forwarding On 877 Router?

Dec 18, 2011

I have a customer who needs to be able to do port forwarding so his branch sites can log into virtual machines.  They currently have a Cisco 877 router which was installed by someone else.  I have no idea how to work it or if this is even possible on this router.

View 2 Replies View Related

Cisco WAN :: Port Forwarding On 800 Router?

Aug 17, 2011

We have the following port forwards set up on a Cisco 800s router. All internal IP addresses are NATd out to the IP on fa4 which is the external interface.  Traffic recieved on fa4 is forwarded to different servers depending on the type of traffic recieved.
 
We can browse the internal websites from the internet fine, but there is one internal server 192.168.1.7 that uses a db server (192.168.1.5).. it accesses it on its external IP (fa4) on port 1433  but for some reason the connection does not work.. could this be because the source and destination IP addresses are the same IP address?
 
ip nat inside source list 1 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.1.7 21 interface FastEthernet4 21
ip nat inside source static tcp 192.168.1.7 80 interface FastEthernet4 80
ip nat inside source static tcp 192.168.1.7 443 interface FastEthernet4 443
ip nat inside source static tcp 192.168.1.5 1433 interface FastEthernet4 1433
ip nat inside source static tcp 192.168.1.7 990 interface FastEthernet4 990

View 2 Replies View Related

Routers / Switches :: Sky Router Port Forwarding

Feb 12, 2011

I am trying to open port 12000 on my sky dlink router, been trying for a few days now and i just can't nail it. When i log into router, it brings up the sky router page, any one ever setup port 12000 on the sky router page.

View 1 Replies View Related

Port Forwarding With Verizon DSL And Linksys Router

Mar 24, 2011

I use Bit Torrent to trade Grateful Dead concert recordings (all legit trading). I have Verizon DSL, a Westell 6100G Modem and a Linksys WRT 160N V2 Router. The Modem is located at 192.168.1.1 and the Router at 192.168.2.1. In the router setup page I have properly forwarded and triggered my ports. However, when I visit my torrent site, it tells me that I am firewalled or "NAT". I used to have the Linksys WRT54G Router and it was configured to PPPoE and everything worked fine. One day I did a firmware upgrade on the router and it would no longer connect to the internet. I switched ti to Automatic Configuration - DHCP and it connected, but performance was slow and this NAT issue began. I eventually got the new router and I have the same problem. If I set it to PPPoE, put in he username and password, I lose my internet connection. If set to Automatic Config - DHCP it works, but, again, "NAT".

Verizon told me that this newer modem self configures itself as PPPoE and there is no need to set the router to PPPoE but I can't seem to get these ports forwarded or get around this NAT issue. It is causing a significant loss of performance and while torrenting I can not connect to others, meaning I can not share what I have downloaded (the torrent client won;t upload). I have been screwing with this for months and have spent endless hours on the phone with Verizon - Linksys says my router is out of warranty so they want $39.95/month for tech support.I have been working with the tech support team on my torrent website and they can't get it figured out either.

View 2 Replies View Related

Cannot Open Router Configuration For Port Forwarding

Jan 6, 2013

I want to port forward, so i can broadcast using icecast but it requires me to access my router. I follow the steps from Setting a Static IP Address in Windows 7 - PortForward.com but from step 4 where i have to access my router in my browser,i write my ip which is: 10.0.0.4 according to cmd, and i just get a "Oops! Google Chrome could not connect to 10.0.0.4" message.I have attached a picture showing info from my cmd. It's in danish but i don't think that should be a problem.

View 3 Replies View Related

Networking :: Port Forwarding On Router WNDR4500

Apr 29, 2013

I have a netgear WNDR4500. What I want to do is stream video from my PC to my IPAD using a program I downloaded from the IOS Store. I simply cant seem to get the router to forward the port.

I will post 3 pics showing what I see on the router side and what the streaming program is asking erroring out. The program on my IPAD just errors out and does not see the PC at home at all.

View 16 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved