One Day the internet is fine the next day The Internet Stopped working. The problem is my pc is sending packets but not receiving any i though it was a bug or something so i restarted my pc after i restarted my pc the internet was working fine until a couple of minutes passed it stopped receiving packets again.i tried resetting the modem but nothing worked.I tried winsock fix or resetting TCP/IP and stuff but nothing workscause its starting to frustrate me.
Our computer is sending but not receiving packets. We've tried 3 different wi-fi adapters, and that wasn't the problem. We have no idea what's wrong? It won't pick up any wireless signals by the way, and it works fine while connected via Ethernet.
I have a laptop computer with windows 7 and im having trouble connecting to my wireless internet. It says that im receiving packets but not sending them. I have tried to troubleshoot the problem and it says that the default gateway is not available. I am not sure what is happening with it, it started having problems while at a starbucks, and now the wireless and the LAN is not working on it.
i have an acer aspire 5315 and im running windows vista home basic, My wireless has had no issues at all until i came to oklahoma yesterday and my internet will not connect to my dads wireless, but at my moms it had no issue, and at the airport i connected to there wifi with no issues also, is there some kind of setting that gets changed when you connect to the internet in the airports that wouldnt allow you to get on your internet at home?
I had a customer call me and her desktop (wired connection only) is sending and receiving packets but she still cannot connect to the internet. Customer has tried power cycling her modem, router and desktop with no avail. Her system is running XP.
I'm using Cisco 2100 cable modem. It worked fine until some time later where the Data Send & Receive LED's stopped blinking. A man came to check if the cable was the problem by replacing it, but it wasn't. He claims it might be related to the laptop. I have tried several times restarting it. (I'm using mobile broadband) I would really like fast rather than slow internet ( I was limited so now it's slow but free)
Cisco ASA 5510. Between 5 to 10 minutes of reseting the asa traffic stop accessing outside ip addresses. Ping from console fails to ISP router IP. Ping to google name server failes. I have reset to factory default only setting up nic and natting and it still happens.
I have a home network that does not connect to the internet, but which I use to play games on, or did before this issue happened by.For years my PC's and friends ones had been able to connect into the network with little or no problems, but a few months ago my tower PC just stopped picking anybody or anything up on the network and I have tried tons of different resolutions to solve this.Anyway, the other day I bought a new HD and installed XP SP3 again on it, and for about fifteen minutes I could connect to my Vista Laptop and share files and play games, then it stopped.Next day the same again and off and on till now when its been down for the last week.I have also now bought a new network card - no difference - and disabled the on board network card through the BIOS - no difference.I have done a Winsock repair, replaced automatic IP addresses with manual ones, and countless other remedies which have not solved diddly.
I have a Asus EEE PC 900 laptop running Windows XP Home. I DO NOT use a modem or router. I connect wireless to someones network (which of course i dont know who it is or how far it is from me) I connect to a Linksys unsecured network. I get good to very good (some times excellent connection from it) The name of my adapter is: Atheros AR5007EG wireless network adapter.Two days ago i was on the internet, and all of a sudden i Lost service ( usually when this happens i wait it out and it comes back)But it hasn't.So I'm checking through my settings and i noticed that im sending way more network packets than receiving. Last i checked it was around 40,000 sent and 5 received. So I wait and wait and wait and the most packets it would go up to is 90 while as sending is still in the thousands.It also says im successfully connected with good to very good connection status (but yet i cannot surf the web because i do not have enough network packets)
I tried different locations in my house (that didnt work)I uninstall and reinstalled my network adaptor (that didnt work)I turned off and on the wireless switch(that didn't work). Im wondering if this has something to do with my laptop or the other persons network? how can I increase the received network packets?
I cant connect to the internet. When I use other networks its fine. Also all the computers in this network im trying to connect to can connect and work perfect. I know i have the WPA code right. Its sending but not recieving any packages. The IP address 169.254.140.90 so i know its not working right.
I recently moved house and got a new ISP. I followed their instructions and set up my broadband. connection is working fine through the LAN, and I can connect to the wifi on my phone but when I try to connect my laptop via wifi it says it's connected but I can't access the internet and it looks like it's sending packets but not receiving.
Everything is fine except that whenever I am receiving packets, there is a corresponding upstream of packets which is subsequently slowing my download speed.I should be getting ~600kbps, but I am instead getting ~200kbps.The ratio of packets sent/received is almost 1:1.5, and of course when your upload bandwidth is being maxed it starts cutting your download speed.
Alright, so we have about six computers on average all on at the same time, working just fine, last night one of the laptops just, stopped working, saying there is no internet access, With every attempt it doesn't send any information. When I disconnect it from the wireless, then reconnect it, it immediately receives packets but won't send any.
So this is somewhat of a strange issue. I have a program called PeerGuardian 2 and it allows me to simplistically see the packets being sent to and from devices on my home network. It's showing that my computer is sending packets to random IP addresses, some of them reoccur, on a massive range of ports all going in order.
(example) From 192.168.1.253:6812 - To 188.8.131.52:80 From 192.168.1.253:6813 - To 184.108.40.206:80 From 192.168.1.253:6814 - To 220.127.116.11:80 From 192.168.1.253:6815 - To 18.104.22.168:80 From 192.168.1.253:6816 - To 22.214.171.124:80 From 192.168.1.253:6817 - To 126.96.36.199:80
This happens in spurts and it usually sends 20-40 to varying IP addresses in a matter of a few seconds. I asked my ISP if they understood what this was and it stumped the technician I spoke with. I also have run multiple virus/malware scans and everything comes up clean.
I can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1
I can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1.
More info: ip config /all netstat -n ping&tracert 192.168.1.1
Have a Cat 4507 with Supervisor 7-E, setup configuration to send NetFLow information to an external server, everything worked great but after 2 weeks, the exporter is showing zero packets sent and the following error is at the console:
A specific switch port which happens to be part of a 2 switch 3750 Switch Stack is seeing multiple CDP packets from 3 extra switch port interfaces that are not directly connected. Noteworthy is that the far end devices have the correct CDP entries and I physically confirmed at least two of those connections that lead to the switch "upstream to the culprit switch". Tricky part is that its production so room for maneuvering is limited. At some point I disabled all Ports save for the real uplink and the problem momentarily disappeared. Re-enable the interfaces problem resurfaces. Is there an explanation, technique to eliminate the culprit with minimal disruption?
i'm planning to use wireshark in my final year project (packet sniffing in wireless networks)and i alraedy installed it and captured some packets, but i don't know how to analyze those packets.I have basic information about networking from CCNA1. I want to learn how to anaylze the captured packets and what the hexadecimal values i got with each packet represent and how to read them.
If I look at a site like wikipedia for example ,it has lots of text. If I capture those packets which made up that page using wireshark I cant find that text anywhere no matter what filter I use and even though I turn on ASCII. Is it because text is being rendered unreadable by some kind of compression?
I had Symfony modem with Asus ap and 1 d-link switch. i changed my modem because that was old and bought TP-Link(TD-W8961ND).It is connected to the Dlink switch and the switch is connected to the Asus Ap(RT-N12) The situation was the same just modem has been changed. Now i have this problem: i have internet with cable every where...behind switch or behind Ap...but when i wanna use internet with wireless via Asus Ap it doesn't work i checked every thing...the Asus Ap has 3 mode(Ap,Router,Repeater)...i chose every one but only repeater mode works. by the way with modem wireless i can get to the internet but the signal is fair for me to use!
I'm running Vista Home Premium X64 with latest updates. I'm also using a VPN for work. Hide My *** Pro v2.6.9.which worked just fine until this morning. My home internet connection is working normally though.My isp is Comcast. My Firewall is Comodo and I have tried using the VPN with and without the firewall running all to no avail.
I restored an old Vista laptop to out-of-the-box state to give to my Dad. This laptop had a wireless connection to the internet and network previously. After the restore, I can't get a connection to the internet, even though my router sees it and it has an ip address. It says Unidentified Network Local Access only, and it doesn't see any of the computers on the network. Sometimes the other computers see it but can't connect, sometimes, the other computers don't see it. I hate Vista.
Stats on Laptop: Toshiba A215-S4747 Atheros AR5007EG
All my other eight devices have an internet connection no problem, but I powered off the modem and router a couple of times with no change. I tried updating the Atheros to the latest driver on Toshiba's website for this model, but it doesn't seem to take. If I uninstall the old drivers, Windows rudely just immediately reinstalls them again. If I just update the driver, and pick the new file, the driver version remains the same as the previous driver. I'm banging my head on the wall with the driver
Ping successful on: 192.168.1.11 (the laptop's IP address) localhost
I am running 32 bit Vista Home Basic SP1.I cannot get online. When I hover the mouse over the network icon in the notification area, it reads, "Connection status unknown. The dependency service or group failed to start". When I try to diagnose the problem, I can't because the Diagnostics Policy Service is not running. When I try to Start the service, access is denied (Error 5). Same scenario for the service DHCP Client. When I click on Start/Connect To - I get the msg Windows Cannot Find Any Networks Meanwhile, I keep getting warnings that my firewall is not enabled. When I try to enable it, I get a message that the Security Center can't turn it on.
Windows Firewall is not listed in services.msc.I ran a full Malwarebytes scan and it found nothing wrong. I did a system restore to several days before the problem, but even though the restore completed successfully, it didn't change my (non)results.The Network and Sharing Center does not display the familiar PC monitor icon with a line to the Network and another line going from the Network to the Internet. Instead it just has the word Unknown with the caption the depencency or groiup failed to start I have heard that this might be due to a permissions issue, but when I use regedit and navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServices and right click on Dhcp, select Permissions, I get an error when I try to add anything (either Local Service or Network Service).
The msg is c:Windowssystem32adsldp.dll is either not designed to run on Windows or it contains an error. Try installing the program again..I have run sfc /scannow as well as chkdsk /f. Scannow reported that it found some problems but was unable to fix all of them. Chkdsk found and corrected about 10 errors, but neither of these programs worked with the issue.Additionally I have downloaded and installed Process Monitor on the PC, but the amount of information displayed is overwhelming, and I'm not sure what to check. Every time I try to start DHCP I get about 200 lines of info on the screen.
When I open a command prompt and run ipconfig /all, I get that DHCP is running, although it is not. I get the bogus ip address of 169.254.... I get a default gateway of zeroes.Is it possible that this behavior could simply be the result of a bad NIC card?Can I possibly run an in-place upgrade from Vista Home Basic to Vista Home Premium? If it's a Dell PC and I have the Dell Premium CD will it ask me for the product key? If so, will the key on the Basic PC work?
I'm trying to set up a windows 7 laptop and a vista computer on a home network.The vista computer accesses the lptop fine,but the laptop has the computer in the network,when you do a full map, but won't access any files. The cursor changes to a hand over the laptop name in full map, but doesn't on the vista icon?