Reconfigure Passphrase Configured On HP Printer?
Mar 2, 2011
I need to re-configure the passphrase configured on my HP printer.How do you run the wireless network set-up in order to re-enter my wireless network WPA security passphrase?
View 1 Replies
ADVERTISEMENT
Oct 29, 2011
So all of a sudden the trusty HP 4000 stopped printing. A little bit of troubleshooting and I found out that the problem was the JetDirect card. I purchased a new one (615n - same model as the old one), installed it, ran a printer configuration page, confirming I have an IP (192.168.x.x) and subnet mask (255.255.255.0), config by DHCP.Also, ran a ping test and it appears to be fine?
View 1 Replies
View Related
Jul 21, 2011
I am testing rogue on wire using 5508 WLC and , I have a dedicated AP configured as rogue detector and configured the switch port where the Rogue detector is connected as trunk. I have plugged in an autonomous AP with open authentication to the same switch so that it can act as a rogue. On the WLC, I can see that Autonomous AP as rogue on Wire. But along with that I am seeing another AP as rogue on wire, even though i have plugged in only one Autonomous AP to the switch.
View 3 Replies
View Related
Feb 19, 2011
i forget the network secutity key
View 1 Replies
View Related
Dec 30, 2012
I can't print from my wireless printer. It wants to know my WPA security pass phrase. Where do I find this?
View 3 Replies
View Related
Apr 25, 2012
where do i find the wirelesswpa security passphrase
View 1 Replies
View Related
Apr 28, 2012
I have had to re format vista and reload my WiFi. My internet connection using an ethernet cable to my LAN works ok but when the ethernet cable is removed and I click "connect" I am asked for my security key or passphrase. How do I find this information or preferably remove the request for it?
View 1 Replies
View Related
Mar 16, 2011
I have a passphrase for my router that I need changed but I don't know how. I was told that if anyone knows my phrase word that they can access my router.
View 1 Replies
View Related
Jun 19, 2011
I have a new Netgear WN2000rpt extender and cannot get past passphrase on the install wizard...nothing happens after I enter my passphrase and select "continue"..
View 1 Replies
View Related
Jan 21, 2013
locate the WPA passphrase for netgear 7550 gateway?
View 2 Replies
View Related
May 3, 2011
I have windows vista and a Atheros adapter?is there a way to just go through control pannel?
View 2 Replies
View Related
Apr 1, 2011
i cant connect to a wireless network with my laptop coz it keeps coming up with enter security key or passphrase
View 2 Replies
View Related
Sep 17, 2012
A few months ago, I purchase, installed and configured a WRT 160N V3. And I couldn't be happier. I now would like to go back and change the passphrase that a user needs to enter when they connecting to my router. Currently it uses the default value. And I would like to make it a bit more friendly. I found a number of postings dealing with setting retrieving or changing the Admin password.
But I was not able to find anything on changing the “passphrase”. There probably are a number of postings on the subject, and I simply overlooked them.
View 5 Replies
View Related
Dec 16, 2011
Is there a difference between (1) the Router Password (on the Admin tab of the web-based utility), (2) the Wireless Security Passphrase (on the wireless security tab of the web-based utility) , and (3) the password on the Router Settings in the Cisco Connect application?
View 2 Replies
View Related
Dec 28, 2007
My wife has a laptop that we want hooked up to the internet through our linksys wireless router. But I cannot remember my security key or passphrase needed to get her on the connection. How do I recover, or find, it?
View 9 Replies
View Related
Dec 24, 2012
I've just hooked up my previously used N300 router. The router is showing a solid green light, and the laptop recognizes that a solid Belkin wireless connection is out there. I cannot for the life of me remember the network key and/ or pass phrase I originally set. No, I did not tape this info to the underside of the router as suggested in Belkin instructions.
View 6 Replies
View Related
Jan 12, 2011
I recently switched my connection from DSL to Cable and Linksys is telling me that I need to reconfigure my router, but they want to charge me for the tech support.
View 7 Replies
View Related
Nov 22, 2011
bought a home 3 weeks ago where there was already a linkysys router ewhen got internet hooked up they did using that already exsisting router. internet been workinhg fine till yesterday modem thru cable working good and right lights on linksys router working. but cant connect to the internetcalled linksys and said warranty up on this router and they want me to pay for continued phone supopoert for 30-50 dollars really.
View 1 Replies
View Related
Mar 10, 2013
After a lot of effort I got my wireless adapter to work like it should without security. I set WPA 2 level security on my WRT54GS wireless router and then went to access the router (set up as an access point) with the WPC54G ver 2 adapter on a Thinkpad T22, it says I have WEP encryption and I cannot enter the passphrase I used for the router. It does not let me select AES. It says to pick AES or TKIP, but TKIP is the only choice.
View 1 Replies
View Related
Aug 12, 2012
how to get into Motorola WiAP100 to reconfigure?
View 10 Replies
View Related
Sep 11, 2011
I just bought a DI-614+ router and i need to reconfigure it for personal use. What is the admin username and password?
View 2 Replies
View Related
Sep 13, 2012
i moved houses and am trying to reconfigure my netgear wireless router, instead of using my apple hotpot?
View 1 Replies
View Related
Mar 21, 2011
I have a Cisco 877 ADSL2 route rconfigured which isnt working. I think it may be the Telco at fault,I receive the following in a debug ppp negotiation
*Mar 1 01:08:23.300: Vi3 LCP: I CONFREQ [Listen] id 5 len 15
*Mar 1 01:08:23.300: Vi3 LCP: AuthProto CHAP (0x0305C22305)
*Mar 1 01:08:23.300: Vi3 LCP: MagicNumber 0x7498F253 (0x05067498F253)
*Mar 1 01:08:23.300: Vi3 PPP: Authorization required
[code]....
The relevant ATM and Dialer configs are -
interface ATM0
description AAPT ADSL Line
no ip address
no atm ilmi-keepalive
[code]...
View 1 Replies
View Related
Jun 10, 2011
Upon turning on the computer, the wireless will not connect. It seems to not recognize the configuration of the wireless. I have to go in and put in the key every time... and then there are times that it says "limited or no connectivity". We just had a new router/modem installed in our network just yesterday. This router/modem is in conjunction with cable tv difficulties we were having.
View 3 Replies
View Related
Apr 26, 2012
I have a wireless router and have lost connection. How do I reconfigure my system to get connected back to internet?
View 1 Replies
View Related
Oct 28, 2012
I have been set out to pasture by the Linksys support staff as I have passed my 90 free tech asstistance period. I had a power outage and now I have a solid Cisco light on the top of the router but I can not get any port light activity on the router. I don't see how I can reconfigure it if the system can not even access it?
View 9 Replies
View Related
Jul 30, 2010
I have a dir-825 connected to Cable modem and a dap-1360 connected I have both wireless and wired clients.If get a ip address conflict and the the dir-825 connection fails from the cable modem and nothing seams to restore that connection, i reboot both route and modem and make sure no client are on. The only way i can figure out how to restore the router is to reset and reinstall from factory state.I can recreate this on 2 different router "825" with factory and updated firmware.I have removed the wireless extender form the picture and this issue has stopped, it might be the extender of a client off the extender. But everything uses DHCP so I'm not sure why ip address conflicts could cause this issue.
View 2 Replies
View Related
Aug 5, 2012
We recently upgraded our bandwidth and I have to change the ip address on our ASA 5510. I just want to make sure that I am doing it right. All I will need to do is open up the ASDM and under confiugration go to interfaces and make the needed changes to the outside interface. Then under routing I will make the gateway IP change on the outside interface.
View 4 Replies
View Related
Nov 25, 2012
Today the power was fallen out in our area and the rv042g was turned off.After the power was back I was checking the router because some trafic didn't came through.Then I saw that all the services were messed up and also all the firewall rules were wrong.the lines were still there but it all was setup as [all 0-0].
After trying to restore a backup it gave me the same, even after resetting the router with the reset button for 30 seconds and doing a restore it didn't work.So I had to reconfigure the router from scratch.This services thing gives me a real pain in the *** because in a previous topic I also have mentioned that something is wrong with the services.
View 6 Replies
View Related
Feb 4, 2013
I have a Linksys E3000 router, which originally had all sorts of security settings, and names for the wireless networks, etc. It was all set up. I upgraded the firmware, and all of those settings sent away. Is there a way to reconfigure the settings to get them back to how they were, and if so, how do I do it?
View 2 Replies
View Related
May 1, 2012
there were three 3750s in a stackwise configuration but later it was decided to remove sw #1 from the stack and make it a standlone sw. I was trying to reconfigure the new combination and tried renumbering the switches and also changed the priority but the switch #1 in a stack if 2 now, shows three switches still!?how can I make sure that new configuration is done clean and the master switche only shows two switches with switch number 1 being master i.e. with "*"?
View 3 Replies
View Related
Aug 20, 2012
I need to clear the old DSL settings out of my E2000 router to switch to my new cable provider.
View 2 Replies
View Related
Oct 16, 2009
My router worked fine. Comcast did updates and now it wont work. If I connect the cable modem to the laptop the internet works fine.It's the router. She said I need to reconfigure it. I tried looking on the site, typing in the 192.168.1.1 thing and the password "admin" is not correct.
My cable modem is Motorola SB5120. My linksys is WRT54G2 V1. how to reconfigure this to work! We work from home and this is a huge obstacle for us to not have wireless internet
View 9 Replies
View Related