Routers / Switches :: Can't Connect To Any Https Websites?

May 31, 2011

can't access gmail or any https sites at all such as fnb.co.za or auction sites ect... I've tried resetting my rooter, configured all the settings as they were when working, I have basically gone into my network & sharing centre and change adapter settings to make sure all the settings there are as should be, reset , & config all of those as well, I've also gone into cmd and reset my D-link completelly from the command, and also tried to restore my computer to an earlier stage which did not work either , Now all I can gather is that It has to be a block some where most likely with the rooter , which is blocking access to port 443.

View 14 Replies


ADVERTISEMENT

Routers / Switches :: Can't Access Any Https Sites

Oct 25, 2011

when my Linux VM is running!How's this for a mystery - last night I noticed that I could no longer access my gmail. Thought it might be down. This morning, I still couldn't access it. Thought I would try comcast, no joy either. Changed computers, no difference. Changed routers, no difference. Bought a new router and started plugging in network cables one at a time. My main machine first, everything works - http and https sites, a second computer, all good. The switch. Fine. Powerline. Still good. Then I plug in a Windows server running a Linux VM. Https sites on all the other machines stop working. Pause the Linux VM, restart router - https sites return to life. Went to Linux machine, re-enabled ipv6 (the only recent change on the Linux machine was to disable ipv6 since upon a reboot, Linux didn't have an ipv4 address). Restart Linux everything seems fine. A few hours go by, try to connect my wife's new laptop and at that moment wireless seems to stop. Restart router, wireless is back. But lo and behold, https is gone again. Unplug the machine that has the Linux VM, restart router, all is good.Ever see anything this weird?

View 3 Replies View Related

Routers / Switches :: Multiple NAT On Https Router?

Feb 20, 2012

is there any router for small office company that can NAT multiple https and support multiple public ip address?I want to host our multiple website via https.

View 1 Replies View Related

Routers / Switches :: Router Network Not Load Certain Websites

Mar 11, 2011

For some time now, I haven't been able to connect to websites from one.com, from my personal network.I've had full access to all those sites before and the only change I've made myself, is changing the standard internet browser from IE to Firefox.At first I thought the problem was on my desktop Win7 computer (which uses a network cable), but after testing the sites on my macbook, with a wireless connection, and having the same issue.

View 4 Replies View Related

Routers / Switches :: Block All Proxy Server Websites?

Oct 10, 2011

i just want to ask how can i block all proxy server websites in my router( any brand ) so that no one can access, like facebook i already block it in the router but they still access using proxy server website.

View 2 Replies View Related

Security / Firewalls :: Cyberoam Not Blocking Https Websites?

Jan 21, 2013

i created a blockyoutube policy , when someone types youtube.com, system tells him he cannot access the website. But when a client types https:// he gains normal access .

View 6 Replies View Related

Cisco Firewall :: Asa 5510 Blocks HTTPS Access To Internet Websites

Jan 20, 2013

I have installed a new ASA5510 with CSC, and everything is working properly except the access to websites using https. All sites/access to them seem to be blocked by the ASA. I have read that this access is by default enabled and I have tried to add configuration to allow https access to the firewall but without success. [code]

View 6 Replies View Related

Cisco Firewall :: ASA 5505 Firewall To Filter HTTPS Websites?

May 28, 2012

I have a cisco asa 5505 firewall. Is it possible to block secure websites in it like [URL]? I have already tried regular expression filtering but it filters only http traffic.

View 4 Replies View Related

Routers / Switches :: Connect 2 Subnets With Two Switches And One Router Using SIM Software?

Apr 23, 2011

how to connect two subnets with two switches and one router using router sim software?

View 1 Replies View Related

Routers / Switches :: Possible To Connect 2 Routers To One Phone Line

Apr 30, 2011

Can I connect 2 routers to one phone line so that I can receive a wireless internet connection throughout my house?

View 1 Replies View Related

Cisco Switches :: FS-300-24 QoS To Limit HTTP And HTTPS Traffic

Apr 20, 2011

Never seen a Cisco, or any other L3 switch before. Nor an Lx router. Any step by step,or class room or web based training, or a partner or Cisco helper to get us up to speed on this.Goal is to limit http and https traffic in favor of telnet to an AIX server and RDP to a Windows TS. Printing would be ahead of http/s and below the others.
 
Interstingly, the web site promises 9 videos, but there are only 8.  The demo guide says about OoS:  "Coming Soon".Where to go? Who(m) to call?

View 6 Replies View Related

Routers / Switches :: How To Connect Two Internet Routers To One LAN

Mar 8, 2011

How do i connect two internet routers to one IP address range?I currently have one broadband router connected on 172.16.0.3 subnet 255.255.0.0, I have a second line which is a copper ethernet EFM 2Mb line connected using a Cisco 1800 router configured on 172.16.0.254 subnet 255.255.255.0, no DHCP is configured on either router. the dhcp is provided by a windows 2003 server on our LAN which is also configured on the same LAN IP range. if i connect the Cisco router into the same switch as the broadband router my network devices stop working and dont respond.

If i check the broadband router it shows all the connections to it as having the same MAC address as the Cisco router?? if i disconnect the Cisco router everything returns back to normal and works perfectly.What I want to achieve is to be able to run both routers on the same LAN to provide internet access by configuring the pc's to route through a specific router. the DHCP I want to stay routed through my original broadband line. at the same time i want all pc's to access to the lan devices (ie. servers and printers) what the correct configuration would be for the two internet routers would be?

View 5 Replies View Related

Routers / Switches :: How To Connect 2 Routers On A Network

Jan 19, 2011

how to connect 2 routers on different lan

View 3 Replies View Related

Routers / Switches :: Connect 2 Wireless Routers Together

Jan 21, 2013

I am trying to connect 2 wireless routers to expand my wireless signal. I want to connect the router 1 (in 2d floor) to a powerline av and then get the router 2 to the powerline (in the ground floor) so i can have wireless there too. I've tried some configurations i found online, but can't get to make the network functioning. The routers and powerline av are all dlink. I don't mind having 2 networks, but it would be better to have only one

View 4 Replies View Related

Routers / Switches :: How To Connect 2 Routers To 1 Laptop

Aug 18, 2012

I have a laptop connected to a net gear wireless router (for internet), but I am very close to buying a Belkin network USB hub to make my hard drive wireless, but this requires a router. I do not want move my hard drive to where my net gear router is, so I need to get another router, i am looking at a Belkin router so that I can make my hard drive wireless (This is the only reason for the router, it will not be used for internet) so I can keep my hard drive in the same place.

View 9 Replies View Related

Routers / Switches :: Want To Connect Two Routers Wireless

Sep 19, 2011

I want to connect two routers wirelessly without running cables , any easiest way without cables.

View 1 Replies View Related

Cisco Switches :: Management HTTPS Session To SF200-24 Suddenly Timeout

May 6, 2013

what would be causing my management HTTPS session to a SF200-24 to suddenly timeout? I receive "The session has been timed out. You may log in again" few mins after logging into to switch.Sometime it happens within 45seconds, other times after 3mins, timouts are not consistent. And, i was not idle when it timed-out. My HTTPs idle time-out is set for 10mins.
 
I had a continuous PING going to managment IP, and it did not drop any pings when session timed-out.Interface stats are also clean. I tried IE, FireFox, Chrome and all are timming out.
 
I've changed the HTTP default idle-time out from 1 to 10 and my HTTPs stopped timing out. Management Access Authentication is cleary set for HTTPs, and the Idle-timeout for HTTPs was set for 10mins since install. Yet, adjusting the HTTP idle-timeout cleared the issue.

View 1 Replies View Related

Cisco Routers :: RV180 Ssh And Https From WAN?

Dec 23, 2012

Is there any way to manage the RV180 from the WAN side via https and/or ssh?Also, is ssh from LAN even available?

View 3 Replies View Related

Routers / Switches :: Cannot Connect To 192.168.0.1?

Sep 10, 2012

I am trying to portforward so I can host a server of a game I play, but whenever I try to connect to my default gateway it just times out and cannot load.I have done the cmd -> ipconfig/all and I found that my default is 192.168.0.1What do I do

View 6 Replies View Related

Routers / Switches :: How To Connect To VPN Using DynDNS

Nov 30, 2011

I recently moved out of state and have been working remotely. I just got a new internet provider who will not let me connect to my office VPN without a small business account which is ridiculous. I've been reading up on how to work around this and haven't been able to figure anything out. I've signed up for a dynDNS account but the truth is I have zero experience with this and don't know what I'm doing - most of the stuff I'm reading is a foreign language to me. I can log into my router and change settings and I can get VPN info from my tech person and work so I just need to know what to do. I can't really work effectively without access to my network but I refuse to pay for a small business account

View 5 Replies View Related

Routers / Switches :: Linksys Can't Connect To 192.168.0.1?

Jan 26, 2011

I'm trying to access 192.168.0.1 to configure my linksys router to add new hardware to my home network but my browser (Safari) can not open the page - error message suggests 'server where this page is located isn't responding.

View 3 Replies View Related

Routers / Switches :: Can't Connect To The Internet?

Jan 27, 2011

with a networking issue that I'm having with the 2nd computer I have trying to connect to the interntet via my Westell 7500 DSL router. I ran the diagnostic tool on the NIC to make sure it working correctly and it is, and so is the cable according the tools; I also verified that myself via unplugging/plugging the cable into the router and it detects eachMy other 2 computers work fine via the router.Here is the ipconfig info;Host Name:XXXXXXPrimary Dns Suffix: (blank)Node Type: HybridIP Routing Enabled: NoWINS Proxy Enabled: NoEthernet Adapter Local Area Connection:Connection-specific DNS suffix: (blank)Description: Intel(R) 82562V-2 10/100 Network ConnectionPhysical Address: 00-1D-09-8D-34-3BDHCP Enabled: Yes

View 3 Replies View Related

Routers / Switches :: Connect The PC's To The Workgroup?

Jan 18, 2011

First , I have installed the router and modem correctly , and i connected it to the switch , So the other devices connected to the internet but not connected to the workgroup so i can't share the files between the PC's ? Modem >>> Router >>> Switch >>> PC's

View 1 Replies View Related

Routers / Switches :: How To Connect Two Dvr 4 Channels Each

Feb 25, 2011

I have two dvr 4 channel each and I need to connect them to just one static IP, is that possible?

View 1 Replies View Related

Routers / Switches :: How To Connect Two LAN Networks

Apr 20, 2011

i was trying connecting two LAN network on different location.

View 2 Replies View Related

Routers / Switches :: Can't Connect To Corporate Through VPN

Mar 21, 2011

I have a Belkin Wireless G Plus MIMO Router and had no problems connecting to corporate in the past until several months ago. I can connect just fine if I bypass the router and connect to the modem. I also have no problem if I go to places like Subway. There is no problem with the wireless internet connection, only a problem when I try to connect to corporate through the VPN.

View 3 Replies View Related

Routers / Switches :: How To Connect 4 PCs Using A Router

Mar 8, 2012

I have 4 computers on LAN using a router and I cannot see eachother, don't know how to configure the PCs. The router is set on DHCP for LAN, the PCs are using Windows 7 and can connect through the internet the router is providing (4 dells) but don't know how to set the computers to see eachother and to share files.

View 2 Replies View Related

Routers / Switches :: Unable To Connect To 192.168.0.1

Sep 16, 2012

Can conect to the internet but unable to connect to 192.168.0.1

View 4 Replies View Related

Routers / Switches :: 192.168.0.50 Can't Connect DAP-1360 With Dir-615

Mar 6, 2011

I am trying to extend range of my DIR-615 with a DAP-1360. Part of the installation requires pulling up 192.168.0.50 on my brouser. But it won't pull up.

View 1 Replies View Related

Routers / Switches :: Connect 3 Computers Using LAN?

Dec 26, 2011

I'm having trouble trying to connect 3 computers via LAN for gaming using straight Ethernet cables and a net gear router. Only 2 computers seem to connect at a time. All 3 can connect to one another (one at a time) and the I.P. addresses have been set to 192.168.0.1 , 192.168.0.2 and 192.168.0.3. The cables work fine and the computers, but I'm wondering if I'm using the wrong kind of hub/router?

View 3 Replies View Related

Cisco Routers :: RV042G Redirects All HTTPS Traffic To NAS

Mar 24, 2013

I've installed a rv042G, disabled dhcp, opened port 3389 (wan to lan), one port formwarding rule to terminal server.
 
Now 48 hours later, when i try to login to the router, (https), I'm automatticaly redirect to the https site of the NAS (iomega ix-200).
 
The nas is connected to a cisco sg100-24, which is connected to lan 1 on the router.

View 4 Replies View Related

Routers / Switches :: Windows 7 - Can't Connect To Wifi

Jul 27, 2012

I have a windows 7 and can connect to my router but my windows xp laptop wont connect to the same router i took it back to the shop and they connected it to there wifi. so what can be the problem.

View 2 Replies View Related

Routers / Switches :: Cannot Connect To Router Manager Via Its IP

Jan 21, 2011

I try connecting to my Linksys wireless N router's setup but it doesnt even find the "site". I have tried pinging the router and i get no response, i have restarted the router and everything, It has never done this before.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved