Routers / Switches :: How To Setup Cisco 2900

Feb 17, 2011

We are in the process of switching to a new internet provider in our office and have run into some problems. Our old setup was with AT&T, where they provided a managed router which linked to our internal switch and also provided NAT to the internal IP of our email server.Our new setup right now is just the internet coming in through a cable connected to a switch, we were told we needed to provide our own router. Someone donated a Cisco 2900.What should our proper set-up be? Should the internet come in directly to the router and then to our switch, or should it go to the switch they provided, then the router, and then our switch?Also, there seems to be some confusion about whether or not we need anything else to get the internet to work. There are slots for network cards in the router. Does it come with at least one built in we can use, or do we need to provide one?

View 1 Replies


ADVERTISEMENT

Cisco WAN :: BGP Setup With 2 2900 Routers And One Sonicwall

Apr 24, 2013

I am looking to setup for BGP with the following conditions:
 
Client has two 2900 routers, each connecting to a seperate ISP
Client has a Sonic Firewall with a link to each router
Client owns their own /24 block of public IPs and has their own AS Number.
Client has a public /24 and /25 from the corresponding ISPs
Client has supplied the following routing rules they would like to use:
-Anything from their own public subnet should advertize via the two ISP's with best path selection
-Anything from the respective ISP public subnets should use only their link (The ISP's are not auth'd to advertize the other's network)
 
The two routers are directly connected to eachother and each has a link going to the Sonicwall.

View 5 Replies View Related

Routers / Switches :: Setup An Home Network With A Wireless Router And Use Multiple Switches?

Jan 29, 2011

I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.

View 3 Replies View Related

Cisco WAN :: 2900 ISR - Upper Limit For EIGRP Hub And Spoke Setup?

Aug 9, 2011

Is there any suggested upper limit to a single EIGRP hub-and-spoke design (i.e. with a single central router)?
 
Router is a 2900 ISR
 
I'm vaguely aware of a similar design limitation with OSPF areas where no single area should contain more than 40 - 80 routers. Could be heresay...

View 13 Replies View Related

Cisco :: Setup P2p Link Between L2 Fast Ethernet Module (within A 2900) To 6506

Oct 14, 2012

Trying to set-up a p2p link between a L2 fast ethenet module (within a 2900) to a 6506.Have created a subinterface SVI on the 2900 and put the fast ethernet port in the respective VLAN. However on 6506, am I correct in thinking I can do a no switchport and just create a L3 interface? Do I need to put the 6506 in the same vlan and the fast ethernet module and create a L3 SVI on it? As it's not a trunk port between the 6506 and the fastethernet module, the packets won't be tagged?

View 3 Replies View Related

Cisco WAN :: 2900 Isr Suggested Upper Limit For EIGRP Hub And Spoke Setup

Mar 25, 2013

Is there any suggested upper limit to a single EIGRP hub-and-spoke design (i.e. with a single central router)?Router is a 2900 ISR,I'm vaguely aware of a similar design limitation with OSPF areas where no single area should contain more than 40 - 80 routers.

View 8 Replies View Related

Routers / Switches :: LAN Setup For 3 Different Office Locations?

Jun 28, 2011

I have 3 different office location and I need to set up a LAN so that all three are connected and can share info?

View 1 Replies View Related

Routers / Switches :: Setup Multiple Public IP's?

Apr 7, 2011

At my company, we lease 3 static public IP addresses from 1 ISP. We want to have 3 separate networks that each use one of the IP addresses. Network 1 is the computer network, network 2 is the VOIP network, and network 3 is the security camera network. I am trying to determine the best way to do this. I have come up with 2 solutions in my head, but I'm not sure if they will work or not. I would like to get some input. Solution 1:Solution 1 looks something like this. Fiber box -> Router-> 3 switches. There would be one WAN input on the router, that would have a static route to 3 different LAN ports. For example, address 24.244.208.101 would be assigned to LAN port 1, 24.244.208.102 would be assigned to LAN port 2, and 24.244.208.103 would be assigned to LAN port 3 (by assigned, I mean have a static route to it). Is there some type of router that is capable of doing this? Solution 2:Solution 2 looks something like this. Fiber box -> Switch -> 3 Routers. The ethernet cable would run from the Fiber Box to a switch, and then 3 routers would be plugged into the switch. Each router would have the Static information configured in them. Would both of these methods work? If so, which would be the best way to go?

View 2 Replies View Related

Routers / Switches :: Did A Recovery And IE6 Page Won't Setup

Mar 13, 2011

I did RECOVERY on my computer. Its a Compac Windows XP Home edition. This computer runs off of my main computer by a router & adapter. My router & adaptor are showing green but the Internet is showing red. Its becuz my high speed Internat service is ATT.my.yahoo.com. which comes through IE. On my newer computer all is fine. My IE works good & all is working. but my IE on my older one which runs with the router wont set up.

View 1 Replies View Related

Routers / Switches :: How To Setup A LAN Connection Properly

Jul 1, 2011

I Have a Computer Ready for setup as a Server in the LAN Connection:

Windows 7 Professional.

Another 2 Computers for LAN Connection:

1st Computer is a Windows 7 Professional (Connect as LAN)

2nd Computer is also Windows 7 Professional (Must connect using a Wifi D-Link)

Another 2 Computer for LAN Connection:

Windows XP: Must Connect Using LAN port.

1 Computer:

Windows 7 Home Edition: Must Connect Using LAN port

2 Laptops:

1st Laptop is using Windows 7 Ultimate.

2nd Laptop is a Vista.

How to Connect these Computers to the above mentioned computer ready for setup as as Server?

View 1 Replies View Related

Routers / Switches :: Networking Setup With DLink DL-604

Apr 8, 2011

I had this small internet cafe with 15 units pc. and browsing the web is not that stable. i have to unplug the internet modem everytime i can't connect to the internet.I think it has something to do with the settings that was in the router since it was just configured by a tech guy which i think not 100% sure of what he did, though it can connect to net for sometime but most of the time it is down.

View 5 Replies View Related

Routers / Switches :: Basic Networking Setup For More Than 40 PCs

Jul 23, 2011

How to set up more than 40 pc's with out internet connection using linksys switch.

View 3 Replies View Related

Routers / Switches :: Manage Static IPS In VOIP Setup?

Jul 21, 2011

I have VOIP and was provided a modem, a Tilgen Router (Vood 452_A). I also currently have a Linksys WRT54G router. I also have a home surveillance system with a DVR that can be accessed via the net. I am trying to allow the ports to open so that traffic can navigate down to the DVR.My IPs:My VOIP has provided me with 6 static IP addresses. For sake of this issue they are:

67.xx.xxx.153, through .158My subnetmask is set to:

255.255.255.248My Settings:

The Modem is connected to world. To the modem I have the Tilgen Router connected. The Tilgen is set with an ip of .153 and the subnetmask listed above. DHCP is turned on and has IP range set for .154-.158. It is set in Bridge Mode with NAT and Firewall turned off. To that I have the WRTG54G router connected and assigned the router an Static IP of .154.. The cable is going into the Linksys WAN port.From a computer connected to a LAN port on the WRT54G, I see my public IP as .154, currently my internal IP is 192.168.1.15 so I believe I have to assign one of my Static IPs to this PC, however when I try to connect to the Linksys Router (.154) from the outside web, I am get a time out error. (also from a ping test.) My thoughts are to assign the Linksys to DHCP and use a range of .155-.158 to give each lan item a static IP. My question is will this work? Will each item in the network have its own IP and if I forward the port to the DVR that i needed, ie 80 for web client or 6100 for desktop client, will that forward through?Or do I set it to Router Mode and use the Tilgen to assign the ips.

On the Tilgen I also have an option for a DHCP relay or to turn off DHCP.

For clarification here is the setup chain
Broadband/DSL Line>>Tilgen Modem>>(LANPort1)Tilgen Router(LAN Port2)>>(WAN) Linksys(LANPort1)>>DVR/Computers
Found this walkthrough on setting the WRT54G into a Switch. If I did this, in theory the VOOD would assign those computers/dvr connected downstream via the WRT54G a static ip from my range set on the router. Then in theory I would not need to port forward port 80 since the DVR would be on its own public IP.?

View 7 Replies View Related

Routers / Switches :: How To Open The Tp-link Interface Setup

Aug 16, 2012

how to open the tp-link interface setup for my TD-W896ON? i have a user and a password but where do i add them ??

View 1 Replies View Related

Routers / Switches :: Temporary Lab Setup 1 Network Port 8 PC's

Mar 21, 2011

We recently moved 8 pc's from a room where they each had port on the switch to a room where there is only one port for all of them. I setup a DLINK DIR632 Router in there and they connect thru the one port thru the switch to the gateway which gets them out to the internet.The problems is I need to be able to remote desktop into these 8 PC's and I need them to be able to print to the network printer. I am using a Linksys WRT54G Broadband router as the gateway connecting the switch to the internet. The DLINK's dhcp server is on for the 8 PC's. The Linksys' dhcp server shows the DLINK as IP 192.168.1.19 on the network.I know I have to use advanced routing settings but I'm not sure about how what to make the subnet mask and IP's on both routers. I believe I need to turn off the dhcp server on the DLINK and have the Linksys' dhcp server serve all of the PC's but I'm not sure if thats the best way or if its possible.. I don't want to hack out fix only to find it breaks 3 days later.I used to do this stuff all day long in the 90's but its been a while and to me its like calculus.

View 13 Replies View Related

Routers / Switches :: Vlan Setup On 2848 Switch?

Jul 25, 2012

I have a dell powerconnect 2848 switch and setting up a vlan 3 an make port 1 mngt, port 48 uplink to layer 3 switch and tag vlan 1 and 3 to port 48 with cli commands for this setup. and also to untag ports 2-10 for computers

View 1 Replies View Related

Cisco VPN :: ISRG2 2900 - How To Count Number Of Cumulative VPNs On 2900

Aug 25, 2011

If there is a router ISRG2 2900 with SEC license and without HSEC license, there is a limit in count of cumulative encrypted VPN tunnels of 225. Which commands can show us a number of current tunnels on the router, so we can see if we are near this limit of 225?

View 4 Replies View Related

Cisco AAA/Identity/Nac :: 3750 / Get RADIUS Setup For Authentication To Switches And Routers?

Sep 19, 2012

We are setting up a new office and I am trying to get RADIUS setup for authentication to my switches and routers.  Currently I am working on a 3750 running IOS 15 and getting hung on what I think on something small.  I have attached my Microsoft NPS Network Policy.  Below is my IOS config:
 
aaa group server radius corp-radius
server 10.15.10.20 auth-port 1812 acct-port 1813
!
aaa authentication login default group corp-radius local
aaa authentication login radius-localfallback group corp-radius enable
aaa authorization exec default group radius

[code]....

View 4 Replies View Related

Routers / Switches :: Can Setup A Staticip Address On A Wireless Computer

Aug 28, 2012

I want to setup a static ip address for a h.264 network dvr ,however my desktop computer is out of order, that is connected direct to router,is it possible to use my wireless laptop to setup the router,or will I have to connect the eithernet cable to the laptop.

View 4 Replies View Related

Routers / Switches :: Linksys E1000 Wifi N Router Setup Without Cd?

Apr 19, 2011

The router was working fine when it was setup but was disconnected for a short while. There is now no recognition of the router and the install cd was misplaced...

View 2 Replies View Related

Routers / Switches :: Setup DMZ By Using Home Router To Prevent Attack?

May 5, 2011

Currently in my office have a TPlink wireless router (WR1043N), and Dlink 615 router.Below is my office's network organization.Internet-->TPLinkRouter(192.168.2.0)-->DlinkRouter(192.168.0.0)We want to host a demo website but we are afraid our network being attacked. So we wish to implement a DMZ network to hide our internal network from outside. My question is can i setup a dmz network with the above capabilities by using home routers?

View 5 Replies View Related

Routers / Switches :: Unable To Configure The Setup On A Hawking 300 N Router

Mar 17, 2012

I have a Hawking 300N and I have misplaced my disk and I neing walked through this to have it set back up. I hooked it all up correctly and it says no internet connection

View 1 Replies View Related

Routers / Switches :: Setup A Vlan To Access Internet Not Network?

Nov 7, 2011

I have a Dell switch setup with 2 Vlan's. Vlan 1 is to the network. Vlan 20 is going to be for wireless access to the internet. How do I configure the switch/router so that Vlan 20 only connects to the internet and not the network? I will later want to have a 2nd SSID that I want to connect to both the internet and network.

View 5 Replies View Related

Routers / Switches :: Wireless Network Setup - Configuring Linksys Router

Sep 18, 2011

I am following instructions I found to set up my wirelss network, but am having trouble configuring my router. I'm specifically at a standstill, because I can't connect to http://192.168.1.1. I pinged the router and got a response and went to run/ip config to confirm I have the right URL for the router, but still not able to get to the URL.

View 1 Replies View Related

Routers / Switches :: Dlink Model DI-624 / Arris TM502GI Modem Setup - Connecting Cables?

Feb 6, 2013

My router is a Dlink Model DI-624

My modem is an Arris Model TM502GI don't remember how to set it up. That is what cable goes where & is there anything to do on the PC With WiFi for it to connect with my router?I am 70 years old with a limited knowledge of computer and other electronic gadgets.

View 1 Replies View Related

Cisco Switching/Routing :: 2900 All Switches Don't Have Cascade Cable Port In Back Panel

Jun 15, 2012

We have multiple cisco cat 2900 switches. all switches don't have cascade cable port in back panel. i want some sort of solution to manage those switch remotely.

View 9 Replies View Related

Cisco VPN :: Configuring 2900 SSL VPN AnyConnect On Routers

Dec 13, 2012

I want to configurate Cisco SSL AnyConnect VPN on cisco router 2900 series.when i install  this license on router after that can i configurate ssl anyconnect vpn? Must I  be first enable EULA then install this license?

View 0 Replies View Related

Cisco WAN :: How Many VPNs Can Be Configured In 2900 Series Routers

Jun 15, 2011

what is the maximum number of Lan-to-Lan and user vpns supported in the ISR G2 2911 and 2921?

View 5 Replies View Related

Cisco Routers :: Remote VPN Access To RV082 From ISR 2900

Oct 23, 2012

I have a customer that has a Cisco 2900 Series ISR on his Headquarters, and has some branches with RV082s.We have VPN Client configured on the 2900 ISR Router and we can connect remotely using the VPN Client to the Headquarters (192.168.1.0)  however we can't reach the branches subnets (192.168.2.0, 192.168.3.0, etc.)... we found out that in the RV082 you need to specify the secure traffic as a destination, but in only supports one network (192.168.1.0 or Headquarters in this case), we can't specify the VPN Client pool defined on the ISR so it can reach the incoming VPN Clients.Is there any way to accomplish this? We need to access the branches subnets when connecting using VPN to the 2900 ISR.

View 1 Replies View Related

Routers / Switches :: Setup Internet Access And Intranet Access Using Two Cards Per PC?

Mar 29, 2011

I am trying to setup internet access and intranet access using two cards per PC. I don't have sever software and I want to be able to share files between several machines. I have two routers. One that connects to cable modem and one that connects to intranet side. I have assigned different static ip addresses to both cards.

View 6 Replies View Related

Cisco Switches :: Multiple VLANS And SG300-28P Switches Setup?

Aug 20, 2012

I'm going to have several SG300-28P switches to setup.  I'll need to create multiple vlans for data, voice, and wireless traffic.  I have the following questions in setting up this configuration:
 
VLAN 1 Management
VLAN 100 Data
VLAN 200 Wireless
VLAN 300 Voice 
 
1) For managing the switches via IP, will LAN1 be the default management network?  Should I create a seperate VLAN for managing the switches?
 
2) For uplinking the switches together, I plan to trunk a port to connect the switches together.  What's the configuration on the trunk port to forward all vlans from one switch to another?
 
3) On some ports, I want to configure a trunk for two vlans (Data and Voice) where the phone has a pass through for PC.  The phone supports tagging for the PC and the VoIP traffic.  For example on port 10, would VLAN 100 and 300 be set to tagged?

View 3 Replies View Related

Cisco Routers :: QuickVPN Setup On RV120W Without Changing Internal Setup

Nov 8, 2011

Is there a way to set up Quick VPN on the RV120W without changing the internal subnet? I have just taken over responsibility for a network and I don't know all of the nooks and crannies yet, so I'd rather not change the internal sub net. I've tried setting up a user then changing the LAN settings afterward, but it automatically removed the VPN user when I did so.

View 1 Replies View Related

Cisco Routers :: SRP527W - Setup - Cannot Find Web Console To Setup

Jan 1, 2012

I've just purchased a couple of SRP527W routers. I've been unable to even browse to the default 192.168.15.1 to start my configuration. My local network is 192.168.1.x. At risk of showing my stupidity, what am I doing wrong.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved