Routers / Switches :: Add Wired Ports Via A Second Router?

Mar 21, 2011

uplink port is already being used for a wireless dlink router.....want to add wired ports via a second router

View 1 Replies


ADVERTISEMENT

Routers / Switches :: Add Wired Ports To DSL Modem And Get Gigabit SubLAN

Jan 24, 2012

Adding ports to my Fairpoint provided Westell 7500 Rev D DLS modem router which has only 4 RJ45 ports. Bought a Linksys SE2500 gigabit smart switch but it doesn't assign IP or pass on router assigned IPs. Can't get ASSISTANCE from Fairpoint [successor to Verizon] configuring router or any advice on other ways to get more wired devices on LAN.For speed in backups I'd like 3 devices to be able to communicate at giabit speed Want to have an NAS and 2 Win7 Ultimate computers on smart switch, 3 other wired devices [WinXP, AT&T Cell tower, & DirectTV whole house SWM interface] and wireless on the router. 1. Are Fairpoint specs for DSL published so I could get another DSL modem router instead of the Westell or is it better to configure Westell as a router only and use a new to be acquired router with or without the existing or a new gigabit switch. I have a DI-624 from the pre-DSL Hughesnet satellite days.2. Are there less smart switches which would work better and let router assign the IPs?3. If this is too complex for me, can you recommend a remote access consultant to walk me through this for a fee?4. I'm 82, have been in computing since 1960, mainly in on-line end user environment mbut don't know the bridging, PPP PPoE differences, and implementation or configuration details of current hard and software except as a user.

View 2 Replies View Related

Routers / Switches :: Non-wired Wireless Access To Router?

Sep 7, 2011

Can I have a wireless access point connected, by wire, to say 2 PCs and a wireless router connected to the internet (+ other PCs) and the link between the access point and router is wireless (i.e. not wired)

View 1 Replies View Related

Routers / Switches :: Wired Router Is Upstream Of A Wireless Is It More Secure

Dec 22, 2011

2 routers in series, is one more secure. I recently asked about setting up two routers in series as routers, one wireless one not. It was my understanding that the computers on the second router would not be visible to computers on the first router, the wireless one. My assumption was that this would make it more difficult for someone who got access to the wireless router to also access those computers on the second router.

View 3 Replies View Related

Routers / Switches :: How Do FPS's Open UDP Ports

Nov 29, 2011

How do FPS's open UDP ports without needing to configure the router to forward them?I never have to forward ports from my router to my PC. Every game i have somehow manages to open the UDP ports it needs without me having to configure my router. Yet when i check to see if those ports are open (prior to starting the programs) they always come back as blocked or closed. Now I'm currently working on a UDP Internet program and need to know how to do the same thing - open ports on a router without having to make the customer configure their routers. I'm THINKING that other programs start with a TCP/IP connection on the desired port and that opens the UDP port. Is this the answer or is there another method used?

View 5 Replies View Related

Routers / Switches :: How To Forward Ports

Sep 17, 2011

how to forward ports using routers

View 2 Replies View Related

Routers / Switches :: How To Open Three Ports

Jun 25, 2011

to access VOD database i must open three ports on the router - not sure how to

View 3 Replies View Related

Routers / Switches :: Uplink Ports Used For ISCSI?

Nov 15, 2012

We have a single HP 2810 switch being used for an iSCSI SAN.We want to replace it with dual higher end switches.But we've got another SAN to also setup now - Dell Equallogic PS6010E - that has 10gb iSCSI SFP+ ports.Can the 4 x SFP+ uplink ports on the Dell PowerConnect PCT5548 or the HP 3800-48G-4SFP+ switch be used for just the 10gb iSCSI, while the other 48 handle the 1gb iSCSI?We were told the uplink ports don't have buffering, making them bad ports for iSCSI traffic and only useful as uplinks to another switch.We only need 8 x 10gb ports (4 for 2 servers, and 4 for the Equallogic SAN), so if the above would work, it would probably save us $10,000 from having to buy a separate 24 port dedicated 10gb switch to handle it.

View 5 Replies View Related

Routers / Switches :: Block Multiple Ports On Only One Ip?

Oct 4, 2011

how can I block multiple ports on only 1 IP Address while not blocking those ports on other IP Addresses. I am using a Netgear WNR2000v1 which assigns the IP Addresses to each device.

View 1 Replies View Related

Routers / Switches :: Adding More Cat 5 User Ports At Tv

Jan 25, 2011

I currently have 1 cat 5 jack at my tv/entertainment area and will be needing additional jacks to add gaming consoles,streaming video player and internet ready tv at the same location.The current jack installed at that location is coming from a D-Link 8 port Gigabit switch installed in a different room.The switch is at capacity,all ports are full,so no additional availability there.My question is how to expand port availability at the entertainment area.Is it possible to put another switch or hub at that connection?Would there be a conflict with cascading a switch from one to another? I have a 25 meg fiber optic incoming service,so there is plenty of speed and bandwith available to handle these componets.

View 1 Replies View Related

Routers / Switches :: How To Add A Wired Network

Jan 30, 2011

I have a D-Link DIR -655 wireless router connected to my Time Warner Cable modem upstairs. Downstairs I have a PS3, Wii, Logitech Revue and a HP laptop. I get low signal strength downstairs(many walls) and would like to run an Ethernet cable downstairs to my devices. What hardware do I need downstairs to hard wire those devices? Not sure if router or switch and what kind. Do I need to make any changes to my existing D-Link wireless router? I want to keep the wireless available for cell phones and the HP laptop.

View 3 Replies View Related

Routers / Switches :: Thomson Speed Touch Not Forwarding Ports?

Oct 20, 2011

Ok, so i never had problems with this before until i reformatted my computer. I have used a program called simple port forwarding and i've also manually added the port seeing if theres a difference, but every time i check my port which is 25565 for a minecraft server it says either failed or not open etc.. I checked netstat -an and it showed it was listening to my ip address and port 25565.

View 6 Replies View Related

Routers / Switches :: Wireless And Wired Connection For The Same Set Of PCs?

Feb 1, 2012

I have 3 PCs (win7-64) connected to a wired gigabit network to achieve fast transfer of large files. Separately, at a distance, I have a modem-router to access the Internet. Internet access for the 3 PCs is achieved with each PC connected wireless to the latter modem router. The 2 networks are running OK and PCs can connect each other on both networks. Question: How can I know and achieve that the gigabit network is used for file transfers and not the slower wireless network? How should configure both routers and PCs to achieve this? I don't need the wireless setup to be a network, just to provide wireless access for each PC and that's it. I used to have the gigabit LAN configured with a Dlink DAP1522 bridge that created a single wireless connection between this wired LAn and the modem-router but it stopped working and I'm pretty done with it.

View 10 Replies View Related

Routers / Switches :: How To Convert From Wired To Wireless

Mar 20, 2011

I'm trying to upgrade my existing Netgear wired router to a Netgear N600 wireless router. I was really hoping just to replug in everything and go. But because the wired router is setup for 192.168.1.1 when I plug in the wireless router it thinks nothing is plugged in because it too wants to use that IP address. How do I disable the wired settings

View 7 Replies View Related

Routers / Switches :: Wireless PCs (192.168.1.x) Can't Connect With Wired LAN

Jan 20, 2011

I have a Netgear WGR164v9 wireless router connected to internet directly by public IP and this router performing DHCP for wireless LAN ip subnet is 192.168.1.x. A server (DNS,DHCP & RRAS with NAT) connected with this router by ip 192.168.1.6 which has another subnet 192.168.10.x for LAN PCs. In this situation everything is fine like internet browsing. The only problem is wireless PCs (192.168.1.x) can't connect with wired LAN PCs (192.168.10.x). The router ip is 192.168.1.1. How can I configure to connect those two subnet's PCs?

View 1 Replies View Related

Routers / Switches :: How To Turn Off Ports For Torrenting On Qwest Pk5000 Modem

Oct 7, 2011

Ok, my roomate is hogging the bandwidth on our shared router downloading junk. I'm not sure if he's using a torrent, but just in case he is here is my question:How do I turn off the ports for torrenting on my qwest pk5000 modem? Is there anything else I can do that would work as well?My friend reccommended I turn off every port after 9000 or something.

View 3 Replies View Related

Routers / Switches :: Connect A Wired Pc To A Wifi Laptop?

Jan 31, 2011

I've got a PC(windows 7) connected to a wired router(not wifi), and I also have a laptop that shares the internet with the PC using wifi. A wired printer is connected to the PC. Is it possible for me to share files and print using laptop? (Wifi Connected to a Wired Internet connection)

View 3 Replies View Related

Linksys Wired Router :: RV082 One-To-One Nat Different Ports?

Feb 8, 2011

I am setting up One-To-One NAT to redirect traffic from the internet. We have 5 static public IP addresses, and I set up One-To-One Nat to redirect to local Win servers. One of the servers running Web server and FTP server. For some reason redirection works fine for the Web server, but does not work for FTP server when I try to access them from the internet. FTP server works locally, but my FTP client cannot connect from the Internet. I opened the ports in the firewall, and these ports show as opened when I test them from external servers. What am I missing?

View 1 Replies View Related

Linksys Wired Router :: BEFSR41 Two Wired Routers In Non-standard Hookup

Sep 14, 2011

I have a home network with a wired BEFSR41 that, for a variety of reasons, MUST be manually IP configured (DHCP off).  All computers and other devices connected to it are manually IP configured.  I desire to add a device that cannot be manually configured, and needs DHCP.  I therefore need to daisy-chain two routers with the second one DHCP on (and manual IP connection to the main network).  The new device needs two-way internet access, but doesn't care if it sees any other current network devices.  I've tried several configurations, none seem to work.

View 3 Replies View Related

Linksys Wireless Router :: E2500 - Use As Hub To Get More Wired Ports?

Jul 11, 2012

This is my first experience using a Cisco Linksys router. Up to now I've always used DLink. But when my newest Dlink router failed for the 3rd time I decided it was time to find a better make. The Linksys E2500 came highly recommended. The trouble I am having is that I've been using an old DLink DI-604 wired router as a hub to get 3 extra wired ports. But with the linksys router I can't get this to work.. Can this be done with this router and if so, how do I have to setup the routers?

View 3 Replies View Related

Linksys Wired Router :: BEFSR41 - Ports (2 And 4) Not Working

Nov 4, 2007

I have a linksys BEFSR41 V.2 router with four ports.  Ports #1 and #3 are working but the other two do not.  The diag. light just blinks rapidly.

View 4 Replies View Related

Linksys Wired Router :: AG10W - Forward Ports To Xbox?

Apr 13, 2013

I have a DSL modem, model AG10W. I can't seem to figure out how to forward ports to xbox. No one seems to have this router/modem. I got it from a company here in town. I don't know much about this type of stuff.

View 1 Replies View Related

Linksys Wired Router :: Befsr41v3 Cannot Open Ports Due To Internet Connection

Nov 16, 2011

i cant open my ports  because i have a internet connection that first goes to my router and then to my modem.

View 3 Replies View Related

Can Wireless Router Be Plugged Into One Of Ports On Wired Router?

Apr 22, 2011

Can a wireless router be plugged into one of the ports on a wired router?I use a wired router and won't use wireless router because of security concerns. However, I am putting a PC in another part of my house. This PC will have limited types of usage - and security concerns will not be an issue for the type of use that machine will have.Running coax across the house will be difficult. My thought was to use a wireless setup for this one machine. But that would work only if I can plug a wireless Router it into a port on my wired router.

1) Can I plug a wireless router into a wired router?

2) If the answer is yes, will that compromise security on the wired ports because the wireless router is connected to it?

Router (wired) = Linksys BEFSR41; Router (wireless) would be "G"

View 5 Replies View Related

Linksys Wired Router :: BEFSR81 V2 Ports Become Inactive - Upgraded To Latest Firmware?

Jan 5, 2012

I have the Linksys BEFSR V2 router and at least once a day some or one of the ports become inactive and have to unplug the router and plug it back in to reset. I have ungraded to the latest firmware but this is still happening on a daily basis.

View 3 Replies View Related

Linksys Wired Router :: BEFSR81 V2 Ports Become Inactive / Upgrade File Pattern Error?

Jan 2, 2012

I have the BEFSR81 V2 and every day at least one of the ports become inactive and the router has to be unplugged and plugged back in to reset the ports. I was going to upgrade the firmware from version 2.44.2 to the one on the site 2.45.10 but when it is downloading I get a message at the end upgrade file pattern error. There is a problem with the router that the ports go out or will the firmware update hopefully correct that issue and how to I get the firmware to update

View 2 Replies View Related

Linksys Wireless Router :: E4200 Loose Ability To Use Internet On Wired / Wifi Ports

Sep 6, 2011

As soon as i modify my wireless to be unsecured, I looy ability to usse me the internet on all wired ports as well as all wireless.  From the routers point of view it still has a good solid internet connection.  Passes traceroute, but wont allow any wired or wireless connections on the internet.  I'm trying to get a Linksys WRE54G v1 to work with this so my parents can have internet once more.  If i manualy remove the security to allow the one touch Auto configuration button to work i loose my ability to surf until i run the Cisco Connection software to turn back on the passwords.

View 7 Replies View Related

Cisco Switches :: SGE2010 Can Use 4 SFP Ports And Stack Of Two Switches At Same Time

Feb 15, 2012

I looking to buy SGE 2010 swith, but I have some question:

1. Can I use 4 SFP ports and stack of two switches at the same time.
2. Is it possible to use for stacking  ports other than 24, 48?
3. What is maximum possible number of ports  to use for stacking (can I get more than 1Gb thruput).

View 0 Replies View Related

Routers / Switches :: Setup An Home Network With A Wireless Router And Use Multiple Switches?

Jan 29, 2011

I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.

View 3 Replies View Related

Routers / Switches :: Connect 2 Subnets With Two Switches And One Router Using SIM Software?

Apr 23, 2011

how to connect two subnets with two switches and one router using router sim software?

View 1 Replies View Related

Linksys Wired Router :: Vlan Trunking 2960 And 2950 Switches

Feb 18, 2011

I have a number of class-'c's as a hand-off from my data center fiber to my 2960, which then sprawls the racks with about many 2950 switches, mostly 20 machines per switch. To allow machines on one 2950 to push data to another 2950 without routing back to my ISP's router(which costs money for bandwidth) isn't is possible to trunk one port on each 2950 to another 2950 and adding a addititional vlan8 to them. Then data jumps from 2950 to 2950 without going back to the 2960 or mainly not going back to my ISP's router.  Is this the correct way to accoplish this with extra vlan and trunking the 2950's to each other or am I looking at this all wrong?

View 1 Replies View Related

Connect 1 Laptop And 2 PCs To Switch Via Wired Ports

Mar 16, 2012

I want to connect 1 laptop and 2 pc,s to a switch via wired ports. Laptop has WiFi Internet. I DO NOT want internet going to the PC's. Question is will this set-up work for me. all 3 are windows 7

View 4 Replies View Related

D-link Dir-825 :: Connecting Wired To Get Wifi Via Wan And Lan Ports

Jan 12, 2013

1.) I don't have a wireless card in my PC, so I will be connecting wired to get WiFi via WAN and LAN ports, right? I have a Windows 7 32-bit desktop PC. We are working with a DSL modem residential line without phone line using a coaxial cable, and Ethernet cable from modem into the PC. provide step by step walk through instructions by connecting this D-link router to my modem and WiFi, and for me to use the WPA2 security?

2.) I have an iPhone 4 with Verizon. If I want to use my iPhone to get WiFi from the router, and turn off the Internet, and use WiFi only on my phone, how would this work?

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved