Routers / Switches :: Connect Landline Phone To Use As Talkback On Radio?
Jan 12, 2012how to connect landline phone to use as talkback on my radio
View 1 Replies
ADVERTISEMENT
Landline Phone Disconnects Router When In Use?
Apr 9, 2013I had my phone companys old westtell router that they sent when our Town first went wireless back in 05-06 this past nov. I contacted the phoneCompany about having to reset the westell often. They were shockedI still had the old router and said i needed the new one and promply sentThis comtrend they supply and ever since i have this new comtrend whichThey even switced out once the below problem has beenoccurringOn a regular basisPhone company has come twice first time moved phone base awayFrom router seemed to work for awhile. Then it started again 9 weeksLater this time said the phones must be the same gigahertz as the routerAand to plug in an old style phone not a wireless handheld. Nothing they
View 11 Replies View RelatedRouters / Switches :: Possible To Connect 2 Routers To One Phone Line
Apr 30, 2011Can I connect 2 routers to one phone line so that I can receive a wireless internet connection throughout my house?
View 1 Replies View RelatedRouters / Switches :: Transfer WAN From Radio Receiver Through Chain Of Routers
May 24, 2012For my work I am looking to create wireless capabilities to remote locations. To do this we are using a standard modem/router that is connected to an Engenius (802.11b/g) wireless outdoor radio connected to a dish antenna. We are able to go to locations (3+km) and then with a corresponding receiving antenna (using LoS), receive the Internet and connect both to computers at the transmitting point as well as to the WWW. The problem exists is that we want to employ a series of routers at the receiving end that would be able to carry the transmission to a different location (relatively close), due to the fact that some of the locations do not have line of sight to the antennas. We are using Encore routers, model # ENHWI-N3. When we connect the radio's Ethernet into the routers WAN reciever, we can connect to the Internet with a computer. The problem exists is we want to pass that connection over to a second router (R2). This connection is done when the routers are on access points set to a WDS function with R1 having R2's mac address and vice versa. Both routers are set to channel 1. Even when the routers are seperated by distances >50m a computer plugged into R2 can see a computer plugged into R1. Files can be transferred between the 2 computers wirelessly at speed around 3 mbps. However computer 2 on R2 can not connect to the WWW. This router features a spot that lights up if it has Internet access and R1's is lit up but R2's is not. How do we transfer the Internet and not just a LAN from R1 to R2 so it can be accessed further away from the point of the radio and antenna equipment. This setup has also been used where R2 is hardwired to R3. At R3 we change the channel to 11, and then connect through that with mac addresses wirelessly to 4th router. If comp is in R4 and far away it can still access and file share from comp at R1.*edit the ip address for the routers exist all on 192.168.1.xxx If the 3rd number is different between routers would this make a difference?
View 1 Replies View RelatedRouters / Switches :: Can Use A Dsl Without Splitter From A Phone
May 30, 2011I have a telephone jack in the lving room and another extension line in the bedroom. Can i use my telephone in the bedroom and the other extension line for the dsl to connect it staright to the dsl router without a splitter?
View 2 Replies View RelatedBelkin Routers :: F7d4302 V1 - Wifi Disconnecting With Use Of Landline?
Mar 30, 2013For some reason, wireless connections from my moms Belkin Play router #F7D4302 v1 disconnect everytime the landline phone is used! There is no phone line connected to my moms computer, modem or router
View 3 Replies View RelatedBelkin Routers :: N300 - Phone Won't Connect To Router
Apr 20, 2013I have a Belkin Surf N300 wireless Modem-Router, but cannot get it to connect to my Android phone. I can connect it to my Nexus tablet, to my desk-top and my lap-top, so I know there is nothing wrong with the router itself. Every time I try to connect the phone, it locates the network, scans, authenticates, but then says "Disabled" and the message: "Secured with WPA/WPA2 PSK" with "locked network" symbol. What does this mean? This is on the label that came with the router: "Security Type WPA/WPA2" but I don't know what to do in order to remove the lock. The phone is a Vodafone Smart Chat and I bought it specifically to be able to connect to Wi-Fi networks.
View 1 Replies View RelatedRouters / Switches :: Connect 2 Subnets With Two Switches And One Router Using SIM Software?
Apr 23, 2011how to connect two subnets with two switches and one router using router sim software?
View 1 Replies View Related3945AGB - Wireless Radio Switches Won't Work On Optima Laptop?
Mar 19, 2011My laptop is an Optima Centoris v662 and i recently had Microsoft service pack 3 installed over windows vista. ever since i did, my wireless radio turned off and the switches (fn f10 and the seperate switch just above the keyboard) wont work. my wireless card is a intel(R) PRO/Wireless 3945AGB but i dont think that is the problem.
View 1 Replies View RelatedCisco Routers :: RVS 4000 - Allow Radio Button Stippled Out
Jan 17, 2012This type of issue has been posted time and time again by others. In this particular instance the ability to deny and allow access based on a time and day for one or more MAC id or IP address or range of addresses does not work. Because the code is so "weak" that it cannot handle a policy which passes the midnight threshold into the morning (the test is actually commented out in the code), one is forced to write one, perhaps two inverse permit rule(s). In this case, it cannot be done because the "allow" radio button is stippled out.
Some simple digging reveals that the file AccessRes.htm gets to the browser with the "allow" radio button stippled out because the token "disabled" appears in the generated html.
<input type="radio" value="allow" name="f_status2" onclick="setBLOCK()" disabled="">
I have several of these devices. They are all new V2 units. They all have the latest version of the firmware and they are all broken the same way. This behavior is the same on various flavors of browser. As an experiment, based on SOP responses I've read, I downloaded and flashed with the latest firmware (same version as delivered), and then performed the factory reset. No change. It's broken.
Routers / Switches :: How To Connect Two Internet Routers To One LAN
Mar 8, 2011How do i connect two internet routers to one IP address range?I currently have one broadband router connected on 172.16.0.3 subnet 255.255.0.0, I have a second line which is a copper ethernet EFM 2Mb line connected using a Cisco 1800 router configured on 172.16.0.254 subnet 255.255.255.0, no DHCP is configured on either router. the dhcp is provided by a windows 2003 server on our LAN which is also configured on the same LAN IP range. if i connect the Cisco router into the same switch as the broadband router my network devices stop working and dont respond.
If i check the broadband router it shows all the connections to it as having the same MAC address as the Cisco router?? if i disconnect the Cisco router everything returns back to normal and works perfectly.What I want to achieve is to be able to run both routers on the same LAN to provide internet access by configuring the pc's to route through a specific router. the DHCP I want to stay routed through my original broadband line. at the same time i want all pc's to access to the lan devices (ie. servers and printers) what the correct configuration would be for the two internet routers would be?
Routers / Switches :: How To Connect 2 Routers On A Network
Jan 19, 2011how to connect 2 routers on different lan
View 3 Replies View RelatedRouters / Switches :: Connect 2 Wireless Routers Together
Jan 21, 2013I am trying to connect 2 wireless routers to expand my wireless signal. I want to connect the router 1 (in 2d floor) to a powerline av and then get the router 2 to the powerline (in the ground floor) so i can have wireless there too. I've tried some configurations i found online, but can't get to make the network functioning. The routers and powerline av are all dlink. I don't mind having 2 networks, but it would be better to have only one
View 4 Replies View RelatedRouters / Switches :: How To Connect 2 Routers To 1 Laptop
Aug 18, 2012I have a laptop connected to a net gear wireless router (for internet), but I am very close to buying a Belkin network USB hub to make my hard drive wireless, but this requires a router. I do not want move my hard drive to where my net gear router is, so I need to get another router, i am looking at a Belkin router so that I can make my hard drive wireless (This is the only reason for the router, it will not be used for internet) so I can keep my hard drive in the same place.
View 9 Replies View RelatedRouters / Switches :: Want To Connect Two Routers Wireless
Sep 19, 2011I want to connect two routers wirelessly without running cables , any easiest way without cables.
View 1 Replies View Related2 DSL ATT Modems Work On 1 Landline?
Aug 21, 2011I have ATT 2wire DSL but the range sucks, can I hook up a second one on the same phone line at the other end of my house?
View 3 Replies View RelatedFax Machine That Operate Without A Landline?
Jan 30, 2012Are there any fax machine that operate without a landline
View 1 Replies View RelatedWireless :: Cannot Connect - Radio Switch Turned Off?
Mar 7, 2012Radio switch is turned off.
View 1 Replies View RelatedConnect Livio Pandora Radio To Router?
Jul 14, 2012trying to connect my Livio pandora radio to router. How do I respond to WPA issued by router?
View 1 Replies View RelatedRouters / Switches :: Cannot Connect To 192.168.0.1?
Sep 10, 2012I am trying to portforward so I can host a server of a game I play, but whenever I try to connect to my default gateway it just times out and cannot load.I have done the cmd -> ipconfig/all and I found that my default is 192.168.0.1What do I do
View 6 Replies View RelatedDSL Modem ZXDSL - Possible To Make Landline Calls Through Computer
Oct 22, 2011I have a DSL connection and obviously it coming through the phone line. Is there any kind of software that I can use to make landline calls through my computer? The DSL modem is ZXDSL. I know I can use Skype, vBuzzer and Google Talk etc etc. But I want to make calls through my landline using my computer or laptop.
View 11 Replies View RelatedRouters / Switches :: How To Connect To VPN Using DynDNS
Nov 30, 2011I recently moved out of state and have been working remotely. I just got a new internet provider who will not let me connect to my office VPN without a small business account which is ridiculous. I've been reading up on how to work around this and haven't been able to figure anything out. I've signed up for a dynDNS account but the truth is I have zero experience with this and don't know what I'm doing - most of the stuff I'm reading is a foreign language to me. I can log into my router and change settings and I can get VPN info from my tech person and work so I just need to know what to do. I can't really work effectively without access to my network but I refuse to pay for a small business account
View 5 Replies View RelatedRouters / Switches :: Linksys Can't Connect To 192.168.0.1?
Jan 26, 2011I'm trying to access 192.168.0.1 to configure my linksys router to add new hardware to my home network but my browser (Safari) can not open the page - error message suggests 'server where this page is located isn't responding.
View 3 Replies View RelatedRouters / Switches :: Can't Connect To The Internet?
Jan 27, 2011with a networking issue that I'm having with the 2nd computer I have trying to connect to the interntet via my Westell 7500 DSL router. I ran the diagnostic tool on the NIC to make sure it working correctly and it is, and so is the cable according the tools; I also verified that myself via unplugging/plugging the cable into the router and it detects eachMy other 2 computers work fine via the router.Here is the ipconfig info;Host Name:XXXXXXPrimary Dns Suffix: (blank)Node Type: HybridIP Routing Enabled: NoWINS Proxy Enabled: NoEthernet Adapter Local Area Connection:Connection-specific DNS suffix: (blank)Description: Intel(R) 82562V-2 10/100 Network ConnectionPhysical Address: 00-1D-09-8D-34-3BDHCP Enabled: Yes
View 3 Replies View RelatedRouters / Switches :: Connect The PC's To The Workgroup?
Jan 18, 2011First , I have installed the router and modem correctly , and i connected it to the switch , So the other devices connected to the internet but not connected to the workgroup so i can't share the files between the PC's ? Modem >>> Router >>> Switch >>> PC's
View 1 Replies View RelatedRouters / Switches :: How To Connect Two Dvr 4 Channels Each
Feb 25, 2011I have two dvr 4 channel each and I need to connect them to just one static IP, is that possible?
View 1 Replies View RelatedRouters / Switches :: How To Connect Two LAN Networks
Apr 20, 2011i was trying connecting two LAN network on different location.
View 2 Replies View RelatedRouters / Switches :: Can't Connect To Corporate Through VPN
Mar 21, 2011I have a Belkin Wireless G Plus MIMO Router and had no problems connecting to corporate in the past until several months ago. I can connect just fine if I bypass the router and connect to the modem. I also have no problem if I go to places like Subway. There is no problem with the wireless internet connection, only a problem when I try to connect to corporate through the VPN.
View 3 Replies View RelatedRouters / Switches :: How To Connect 4 PCs Using A Router
Mar 8, 2012I have 4 computers on LAN using a router and I cannot see eachother, don't know how to configure the PCs. The router is set on DHCP for LAN, the PCs are using Windows 7 and can connect through the internet the router is providing (4 dells) but don't know how to set the computers to see eachother and to share files.
View 2 Replies View RelatedRouters / Switches :: Unable To Connect To 192.168.0.1
Sep 16, 2012Can conect to the internet but unable to connect to 192.168.0.1
View 4 Replies View RelatedRouters / Switches :: 192.168.0.50 Can't Connect DAP-1360 With Dir-615
Mar 6, 2011I am trying to extend range of my DIR-615 with a DAP-1360. Part of the installation requires pulling up 192.168.0.50 on my brouser. But it won't pull up.
View 1 Replies View RelatedRouters / Switches :: Connect 3 Computers Using LAN?
Dec 26, 2011I'm having trouble trying to connect 3 computers via LAN for gaming using straight Ethernet cables and a net gear router. Only 2 computers seem to connect at a time. All 3 can connect to one another (one at a time) and the I.P. addresses have been set to 192.168.0.1 , 192.168.0.2 and 192.168.0.3. The cables work fine and the computers, but I'm wondering if I'm using the wrong kind of hub/router?
View 3 Replies View RelatedRouters / Switches :: Windows 7 - Can't Connect To Wifi
Jul 27, 2012I have a windows 7 and can connect to my router but my windows xp laptop wont connect to the same router i took it back to the shop and they connected it to there wifi. so what can be the problem.
View 2 Replies View Related