I need to connect a OS2 pc with Windows Server 2008. However, I have tried the Netbeau (which can work in connect with Windows Server 2000), I cannot install the Netbeau to Windows Server 2008.
View 2 RepliesOne of the computers at my office died and needs to be replaced. I need to get the new computer set up with an existing user account so that the user can access email and public drives. The new computer is running windows 7 professional.Our server is running SBS 2008.
View 5 Replies View RelatedI have 2 servers 2008 & 20 computers win 7 i need to give for 10 MB Speed for some computers and the others computers 100 MB Speed How?
View 1 Replies View RelatedI have a network domain with 2 domain controllers running windows server 2008. At some point the DNS name for one of the servers got messed up and they stopped talking to each other even though they are on fixed IPs. The DNS problem has been fixed, but they haven't started communicating again. While the DNS was messed up the domain controllers kept running a different copy of the network. The DFS stopped replicating, the users lists fragmented and the network separated into two "shadow domains" with the same name. DC1 says it is healthy, but it claims DC2 is offline. DC2 claims it is healthy but DC1 is offline. I don't even know where to begin repairing this rift.
View 1 Replies View RelatedHow do configure win2008 server to bring up a password prompt box when access via a workgroup pc on lan.
View 1 Replies View RelatedIn windows server 2008 i got the mess "limited connectivity" after one hour (approx)
View 2 Replies View RelatedWe're using a CSS501 to load balance http requests over three servers running windows server 2003 and IIS 6. On Saturday I attempted to switch over to three new servers running the app on Server 2008 and IIS 7.5, I mirrored the used the existing setup to create the new environment (pwgecashwww01,02,03 Owner ACMENewServers and group NewServer).
View 2 Replies View Relatedwe have two servers in our network, one functions as a file server (windows server 2008) and the other as a domain controller with active directory and some database applications running on it (windows SBS 2003). the file server has folders for the different units in our company, these are shared folders. these folders can be accessed by anyone with a domain login by running \servername from their computers, without any further authentication required.
i have tried to set up sharing restrictions with no success, for example the Accounts folder, i right click on it and select properties, and the sharing or security. under both tabs i added three names of those that i want to have access to the folder. these names appear in the sharing list together with:administrator(servernameadministrator) administrators (servernameadministrators) administrator systemeveryone has not been added as is the case with all other folders. what is this system on the list? how i can restrict access, perhaps there is a setting that i have missed or settings in the network that prevent these restrictions?
I have a small mixed peer-to-peer network comprising 2 Win7 PCs, an iMac and a Win7 laptop and 2 little file servers: a Netgear Stora and a LaCie-2big.Stora is correctly listed under the Network part of Windows Explorer, but LaCie isn't, although I have been able to map a drive to a share on LaCie.No problem accessing files etc.Why would the LaCie not be displayed in the Explorer file tree?
View 2 Replies View RelatedI planned to install a LMS 4.0.1 on a VMWare server with Windows 2008 R2 64bits.
Is it supported with the "Windows 2008 R2" patch or do I need to order LMS 4.1 version ?
I have a client who does not use exchange, and doesn't need any of the SBS features.Their server is aging and are running out of disk space.
I'm in the process of building them a new file server and am considering using Server Standard 2008.I am even going to take them off the domain and make their server strictly a file server for Peacthree. It is the only reason they even need a "server".
Client has a Dell T310 SBS 2008 box with 3 workstations running Windows 7 Professional.
Network is currently like this
Westell DSL Modem > Belkin Router (consumer crap) > Dell Powerconnect 2816 > server > workstations
I used the wizards on SBS to configure the internet, add the users, connect the computers, etc.
We are having intermittent internet problems. The only problem in the server SYSTEM eventlog is "Cannot connect to DNS server". At first I thought it was a server DNS issue so I changed the maxcacheTTL to 3 days. However, I noticed that I couldn't get into the Belkin configuration so I had to manually reset the router and everything worked fine. One thing to note is that the SBS server is handling DHCP and DNS, and in the router configuration there isn't an option to not use an alternate config or the ISP. Could this be causing the problem?
I don't do this as my day job, so I need some good fixes or things to look for. The fix right now is to power cycle the router.
net send command not available on server 2008
View 1 Replies View RelatedOur companies dc cant connect to the internet and can only access the local networkI configured everything correctly eg ip adress dns and default gateway
View 1 Replies View RelatedI have Server 2008 R2 DC & One ISA server 2006 enterprise. im facing problem with DHCP unable to give DHCP IP from internal LAN. Its taking IP from External LAN IP i.e. connected to Linksys external Router which has DHCP enabled with different IP class i.e .class B. After shutdown client PC it will take 0.0.0.0 no IP will be assigned & says linited connectivity.
View 4 Replies View RelatedI set-up my law firm network with a server 2008 database. Now I am renting out one of my offices to a separate lawyer and I want him to be able to use my network to access the internet, but not my server 2008. Is that possible or is it already secure being I haven't installed any of my software on his computer?
View 2 Replies View RelatedUnder Service in Win NT 2008 server, how can I remove the auto-shut down task schedule for all students' computers in the classrooms. It always popup a message box at 5:30pm - "auto shutdown" in all workstations (win xp). How to remove that from "service" and not affecting the server to shutdown? Click where to disable/stop it?
View 2 Replies View RelatedI'm someone who has a long background of computers but it's generally just giving general advice, building them, overclocking them and troubleshooting standard 'Home PC' type issues mostly with hardware but some software as well. I really want to start to expand my knowledge somewhere else within computer hardware and software to improve my job prospects in this area. I'm trying to move towards more of a Network/Server admin/support type career and I'm just wondering where the best place to start learning about something like this might be? I don't even know where to begin.
View 2 Replies View Relatedi am trying to use windows server 2008 R2 as a host machine, and i will be using windows server 2008 R2, and windows server 2008 serverCoreR2 as guest virtual machines. I have two NICs on my computer, and my computer has the memory, the hard drive space, and the cpu to handal this.
View 1 Replies View RelatedRight now every computer is connected through a workgroup and some computers are sharing files to everyone and some need a login to share other files. I want to run a main server where all the files are on that computer and have it share all the files to everyone else on the network. I'm not too familiar with Windows workgroup networking and file sharing.I want to have certain files accessible to certain computers and certain files accessible to everyone on the network. I'm under the impression that I have to have the main server with all the business documents. Then create separate accounts on the server and hand them out to each individual computer. After, go to each document and specify who can access what with read/write. Can I share some files to everyone and have certain files limited to other computers at the same time? How would someone access the shared files when you need a login and will this login conflict with files shared to everyone and files shared to certain people. I remember on my small business network I need a login for certain computers because it is shared to only certain people then how would I access the files shared to everyone when I have to login to see the server files to begin with?
View 1 Replies View Relatedwindows server 2003,ISA server 2000 Networking :: Connecting ubuntu desktop?
View 1 Replies View RelatedI'm setting up an ACE 4710 in our test lab before deploying in production. Do the test web servers I am using need to use the ACE as their default gateway? The are currently configured to use a multilayer switch on their vlan as their gateway but I'm guessing the ACE needs to see the return traffic for load balancing to work correctly?
View 2 Replies View RelatedI'm looking for a way to configure Cisco ACE4710 loadbalancer to bypass traffic that is initiated from server side to Internet?Are there any way to configure this, so that the loadbalancer will not maintain session for this bypass traffic to maximize throughput?
View 1 Replies View RelatedI wan to access a folder shared on windows 2003 server 32bit from a Windows 7 64bit ultimate WS. but after asking password, beside giving correct password, it asks again and agian and do not show folder
View 1 Replies View RelatedI am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies View RelatedI have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies View RelatedI'm wanting to make use of an old PC here that has Windows Server 2008 on it. i basically just want to use it as a backup machine. i have 1 PC, 1 Mac and an iPod Touch that'll be accessing it. what do i need to do to set it up? is there a guide anywhere? how is it different to setting up a NAS using FreeNAS?
View 3 Replies View RelatedMy computer has today 3x2 TB WD Green disks and thay are really slowing my system down so now I need to move them to somekind of NAS.I was first lookin at the "Synology Disk Station DS411j" but then I found that I got some old hardware laying around (AMD 3200+ CPU, 1 GB ram,XFX GeForce 7600GT, Seasonic SS-300FT in a Thermaltake Xaser II chassi). So now I got some questions :
1. I was looking into running FreeNas on my NAS but if the NAS is crashing then it will be alot of work to get the data back? Is it right that its not possible to just mount a drive from the FreeNas in to my Windows7 computer and read the data?
2. If I install Windows 2008(not r2 that demands 64bits CPU) and then uses dynamic volums to get one big volume, what will happen if this Windows2008 craches? will it be able to place one of the disks in my windows7 computer and reda the data?
3. What happens if one disk i a dynamicvolume craches? will all data be lost?
4. Is there any sleepmode in Windows2008? If would be nice if the computer shutsdown at night and startsup when it is about to be used.
5. Will a finished product like the "Synology Disk Station DS411j" demand less power? Will I earn anything to buy the DS411j instead of my old hardware if we look on the economics?
I am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.
Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:
Now we have seen that we need to use this command (in cmd) to add a static route in W2008:
route add [NETWORK DESTINATION] mask [SUBNETMASK] [GATEWAY] if [NIC]
Q1: What exact command(s) do we have to use to make the Laptop in 10.10.10.0 to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)
We have tried several combinations and can't make laptop to access Internet, not even to ping 192.168.1.5. We have just accomplished pinging to 192.168.1.181 from the Laptop, and to ping 10.10.10.2 from the Server but that's as far as we went.
I can't join a Windows 2008 Server from client computer running Windows Vista Business Edition. I get the message "Network path not Found" yet I can ping the server and the server can ping my computer.
View 2 Replies View RelatedAny methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedI have a home server that I'm using to host a site with a domain purchased from Go Daddy. I understand how to set up a static IP address on Win Server 2008, but my provider will not allow for me to purchase a static IP because I'm a home customer, not a business.My question is this: should I just ipconfig my ip address every seven days and then change my server's address? Is there a software alternative? Is it necessary for me to change it at all?
View 1 Replies View Relatedi m having one static ipwant to create the network in computer labhow i do thisi have one cisco router assigned with one ip address
View 1 Replies View Related