Sharing :: D-link DES 1016E - Access Office Pc Through Internet Browser

Feb 21, 2012

I run a small organisation with 4 pc in LAN with a D-link DES 1016E router, and of course Internet connection through BSNL Broad Brand with a dynamic IP . Kordil EDMS, XAMPP is installed in one of this Pc with XP Pro SP3 and IIS7. I want to establish a easy and Free system through which i can connect my office server from anywhere through browser for editing ms office files at my Office network. suggest a step by step guide. I don't have any system administration knowledge. i have activated Remote desktop, but whenever i am connecting through internet my DSL router configuration page is opening.

View 1 Replies


D-link Dir-615 :: Wifi Access Point - Getting No Browser Internet Access

Apr 22, 2013

I've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.

View 3 Replies View Related

D-Link DIR-825 :: Access USB Storage Plugged Into Router Other Than Using Internet Browser?

Sep 2, 2012

Is there any way to access the USB storage I plugged into my router other than using an Internet browser?  I was hoping to use it like any other drive on my system.

View 3 Replies View Related

Sharing :: How To Remotely Access Office PC From Home

Feb 10, 2013

How to access remotely over the Internet to office PC from my home PC and get files that I need? Office's ADSL modem's model is BeWan iBox V1.0 and it has a built-in firewall. ADSL connection has a dynamic IP, which I assume should be configured as static (but how?) Should I investigate VPN capabilities as well? I'm not very knowledgeable about these things.

View 7 Replies View Related

D-Link DIR-655 :: Cannot Access OWA After VPN To Office From Home

Feb 22, 2011

I had an SMC router before, and I replaced it with this new D-link DIR-655, The problem I am now having is that I used to visit a web based e-mail  /OWA  Outlook Web Access, After I VPN to my company,  but now with this new D-Link after I VPN, I lost the capability of accessing my OWA to read my e-mail

View 1 Replies View Related

Can't Access Internet From Any Browser

May 22, 2011

I have intel Atom system, i installed windows xp sp2,i connected to internet but my browser doesnt works, i checked my modem, cable all are working fine then i pinged my ip in cmd and default gateway and website they are ping perfectly but i cant browse in ie, firefox,Even i replaced operating system but it doesn't work.

View 2 Replies View Related

Cabling / Cards :: D-Link DIR-100 Router - Can't Access Configuration Page From Browser

Feb 5, 2011

I have been using this router for 6 months without problems. However, it hasn't been working since yesterday morning. It receives power but the Internet led doesn't light up. The network leds are blinking faintly and rapidly. I can't access the configuration page from my browser. Is it dead or not?

View 9 Replies View Related

Can't Access Internet Through Ethernet Browser

Feb 14, 2012

The other day I had no problem accessing the internet with my ethernet browser, however yesterday, I couldn't access the internet anymore ( I only have ethernet browsers' instanleed in my computer). I sure have internet connection, I can even click the 'ethernet' but it doesn't continue uploading and there's this small black message box telling about 'memory'...

View 1 Replies View Related

Connected To Internet But Cannot Access Through Browser

Feb 13, 2011

I have a problem where my computer is showing as connected to the internet but I can't access the internet through the browsers or updates etc.I have a wireless home network consisting of a computer , a laptop and a playstation conected to talk talk router. my laptop is the problem and is running on vista home basic ! In the corner of the screen it showing that im connected and that im connected to the internet and the router. But if i open a browser it acts like it isnt connected. i have tried system restore but it didnt work. my computer and ps3 work fine.

View 1 Replies View Related

PC Has Internet Access But Browser Will Not Connect?

Jun 2, 2012

I have 2 PC's on a LAN, both Windows 7 Ultimate. Both PC's is connected to the same router via ethernet.Now PC number two has internet access and works great, but PC number 1 also shows "Internet Access" in the system tray and also in the network map, it shows that it is connected to the internet. But when I open ANY browser(FF, IE, Chrome) it cannot connect to the internet. Skype also cannot connect. As I said, the other PC (PC2) can connect fine and has the exact same setup as PC1. However, on PC1, when I manually connect via a dial-up broadband connection using the SAME username and password to my ISP as I used in the router config, it connects. The problem is that it loses the connection every 2 minutes or so...(failed to connect...redialing...). What I can do on PC1 to make it connect to the internet via the router the same way the other PC does?

Also, the two PC connects fine over the LAN between each other, but as I said, PC 1 cannot connect to the WAN the same way PC2 does. Things I tried: I did a TCP/IP stack repair and rebooted. Nothing. I disconnected the 'working PC' from the LAN, nothing. I uninstalled the Antivirus and Firewall, nothing...

Router: Siemens Giga 762SX

Network adapter on PC1: Realtek RTL8139/810x Family Fast Ethernet NIC. I do have the latest drivers installed

View 9 Replies View Related

Remote Access Computers Via The Internet Browser?

Dec 6, 2011

Is there anyway that I can access Remote access my computers via the internet browser.

View 4 Replies View Related

Home Network :: How To Access Router From Internet Browser

Jan 31, 2013

I am experiencing problems trying to access my routers HTTP-type configuration. I have a Billion 400G router. The address to access the router was always and that has always worked. A dialog box would appear asking for a username and password. Now it doesn't even reach that screen. It says that the connection timed out. I've tried Firefox/Chrome/IE10. To no avail. My system: Windows 8 build 9500. Also something weird. When I type in this Microsoft thing comes up with IIS 8.

View 2 Replies View Related

Broadband :: Limited Internet Access At Office?

Mar 10, 2011

i got one thing im in my office we have limited inter net acess but people are using much so i want to control the net. once only office hour

View 1 Replies View Related

Sharing :: Small Office Setup With 50 PCs

Jun 25, 2012

I was into IBM iSeries all these years (15 years) and just got into Microsoft Programming(.NET) I have done a program in which gets input from the users and dump it into a database. 50 users are going to do the data entry with just one database. As I dont have much knowledge on sharing/accessing applications/database in a network environment (PC based).

View 1 Replies View Related

Small Office Network - NAS And Internet Access From Both Offices?

Apr 26, 2011

I have a cable modem in the basement and ethernet lines to two offices upstairs.I have a 4-port wireless router and a 5-port switch. I have a computer in each office and a NAS in one of the two offices.There is no direct wiring between the offices. I want to have internet access and access to the NAS from both offices. Will the following configuration work without having to go to Static IPs? 1) Modem01-> Router01->Switch01->Computer01; 2) Modem01->Router01->Switch01->NAS01; 3) Modem01->Router01->Computer02. If not, what needs to change?

View 3 Replies View Related

Sharing :: Downloads Are Incomplete / Changed Browser But No Improvement

Sep 21, 2011

've used every version of ie up to 7 with no real problems, but I figured it had to be the browser, so I switched to Firefox. No improvement!Problems:When downloading (WinXP PC) online, suddenly all zips and apps (even Flash Player for browser) started showing "incomplete" or as it's called "Corrupt" files. One or two or maybe more small files would be left out. When finished downloading, it would say it completed the right mb's, but when unzipping or trying to install, there would be files missing. Tried "Repair" in WinRAR, no luck.

View 7 Replies View Related

Routers / Switches :: Sharing Across Two Networks In Same Office

Aug 6, 2011

My workplace currently has one AD Forest. Slowly we have drifted in to two slightly separate businesses and my boss wants us to create a new AD Forest and segregate the users doing each business. Although we will all be in the same office, each side will authenticate to a different DC. The problem is, that we have some resources that still need to be shared and I would like to share them as eloquently as possible without converging the networks too much. The two networks will be in the same server rack but they will logically appear as this:Forest1.local (original)

-Cable Internet -- Router A (192.168.1.x) -- 48-port switch A -- PC/Phones/Domain Controller AForest2.local (new)

-Cable Internet -- Router B (10.1.1.x) -- 48-port switch B -- PC/Phones/Domain Controller B.

The problem I have is that the users in the "new" network need access to a shared folder, shared customer DB, and shared printers on the original Domain Controller, named "DC A" above. I have complete control over both networks but cant figure it out the best way.My main concern is physical access between the networks. How will a pc on the 10.1.1.x network know where printer is? I thought about creating a forest trust in order to assign proper permission but how will they resolve the names on a different subnets? The two "routers" are just simple SOHO type routers so I cant do much there. I thought about connecting the two switches together but don't know if that would work. Wouldn't the data just get passed to the default gateway (router) anyway. The router would then just drop it. I also though about using the 2nd NIC in each DC and connecting them in each other's subnet. But again Im not sure if it matters if the DC's can reach each other or if the PC's would have to be able to reach the other subnet etc. I also thought about just creating some kind of VPN (hamagachi) or whatever to go out into the internet then back into the other router to the network.The problem is wouldnt every computer wanting to access the shared folder have to have this setup. I would like to limit setting things up on workstations and just limit config to the DC's if possible.I basically just want users in subnet two to be able to map a drive and access printers on DC in subnet one.

View 3 Replies View Related

Servers :: Small Office Networking With File Sharing For Certain Users?

Feb 4, 2012

Right now every computer is connected through a workgroup and some computers are sharing files to everyone and some need a login to share other files. I want to run a main server where all the files are on that computer and have it share all the files to everyone else on the network. I'm not too familiar with Windows workgroup networking and file sharing.I want to have certain files accessible to certain computers and certain files accessible to everyone on the network. I'm under the impression that I have to have the main server with all the business documents. Then create separate accounts on the server and hand them out to each individual computer. After, go to each document and specify who can access what with read/write. Can I share some files to everyone and have certain files limited to other computers at the same time? How would someone access the shared files when you need a login and will this login conflict with files shared to everyone and files shared to certain people. I remember on my small business network I need a login for certain computers because it is shared to only certain people then how would I access the files shared to everyone when I have to login to see the server files to begin with?

View 1 Replies View Related

Sharing :: Running CCTV Software From Office To Monitor House?

Sep 4, 2012

if i want to run my CCTV software from my office 1- how to connect to home network ?? should i use VPN ?

if yes : kindly tell how to configure both office PC and my network at home

if no : is there another technology (free one , easy to configure....)

View 5 Replies View Related

Sharing :: 8032 - Browser Service Has Failed To Retrieve Backup List Too Many Times On Transport

Dec 14, 2011

This network has a peer network with a mixture of Win 7, Vista and XP computers. The network problem I am having is with an XP computer that was able to access network shares on a Win 7 Pro (64-bit) computer yesterday, but cannot today. I tried repair steps that have worked for me in the past, but didn't today.

1. Rebooted.
2. Turned off Windows Firewall.
3. Re-ran the Network Setup Wizard and select turn on file and print sharing.
4. Changed IP configuration to choose NETBIOS over TCP/IP.
5. Uninstalled AV software.

Error Messages that I have been receiving:

1. When attempting to connect to a share on Win 7 PC: "Microsoft Windows Network: The specified server cannot perform the requested operation. The connection has not been restored."

2. When trying to view the computers in the workgroup: "Workgroup is not accessible. You might not have permission to use this resource. Contact the administrator of this server to find out if you have access permissions. The specified server cannot perform the requested operation.

3. When using the command, "NET VIEW" from the command prompt: "System Error 58 has occurred.

4. Event Log: Browser error 8032. The browser service has failed to retrieve the backup list too many times on transport DeviceNetBT_Tcpip_{06ECF93A-1B89-4FF4-923E-F3302EF95FE1}. The backup browser is stopping.

View 3 Replies View Related

TP-Link 150Mbps Wireless :: Internet Sharing Using WR741ND?

Jan 23, 2013

I have high speed internet connection. The following image shows how my ISP provides internet connections:


I am required to put IP address in my computer network settings. This IP is used to go to login page to put username/password. It is a web based authentication(kind of captive portal you can call). Done! I am connected to the internet. Super fast!Now, I would like to share this internet connection between two computers using WR741ND router. So, what I am doing is having both these two computers connected to the router using LAN ports whereas my ISP cable to the WAN port of the router. IP settings of both the computers are set to: Obtain IP address automatically.Configuration in the router:

Logged into the router--->Network--->WAN--->Static IP--->Settings saved

I am able to connect to the internet using any of the PCs. The problem is I am unable to access the internet simultaneously using both the computers. When one computer is in the process of loading website and I try to open a website on second computer the second computer does not start loading website at all and even the first computer stops opening the website.What change do I need to make in the router configuration? Can this internet connection be shared at all?

View 2 Replies View Related

Cisco VPN :: 5510 Site-to-Site VPN Internet Access From Branch Office For Group

Mar 6, 2013

Our Headquarter (asa 5510) is running a site to site vpn connection with a Branch office (router 2811). All remote users are accesing the internet through the VPN and also accesing headquarter file servers.I want to know if there is a way for some remote users to be able to use the vpn for accesing the file servers but to access the internet through the branch office.  The rest of the remote users will be still accessing the internet through VPN.

View 2 Replies View Related

Sharing :: Network Internet Access Resets In Every 30 Minutes?

Nov 16, 2011

ON WINDOWS 7 every 30 minutes or so i notice that "turn off network discovery and turn off file and printer sharing keeps resetting to ON" this is odd? i have to keep going and turning them off manually all the time.

View 2 Replies View Related

Sharing :: Server Disconnects From Internet Blocking Access To Shared Folders

Aug 19, 2012

I have a small network running in my language academy which is causing me some issues. We have a server running Win XP with two folders, one for the teachers which is password protected and the other for the students which doesn't require a password. Up until two days it has been working well. However now the server keeps disconnecting from the internet quite randomly which stops us from connecting to the shared folders.

I've noticed that a caution icon appears next to the ethernet icon in the task bar when this problems occurs on the server. I have tried to right click and choose the repair option but it tell me that it cannot resolve the ip address. In some cases rebooting the server resolves the issues but in many case it doesn't.

View 1 Replies View Related

Cisco Switching/Routing :: Sharing Internet Access Through A 3550 With 2 Vlans?

Apr 27, 2013

They have a locked Cisco Router which is from the ISP and its confed on a fa 0/0 interface to share Internet access on the network. The ip on that interface is and i tried it with a PC (set my personal ip to .218 and entered their dns info ( and it is working. The question is now. My friend found a 3550 laying around and since the ISP wont let them conf their router he wants to use the 3550 to create 2 vlans with internet access and without access to eachother. Vlan 10 for the desktops and Vlan 20 for the wireless (Moving on to some netgear wireless switches) How would you configure the 3550 for this to work?

View 23 Replies View Related

Cisco Switching/Routing :: 2950 / Vlans And Internet Access Sharing?

Apr 5, 2013

i am trying to set up a cisco 2950 with a vlan to seperate all of the pos machines on the network (4 of them) from all other machnes in the building (3 hard wired and wi-fi).  i was going to use vlan 1 as a trunk to allow internet access to go from fa0/1 to both vlans (vlan 10 and vlan 20).  i have read things about the acl having an explicit deny at the end, so i'm thinking that is my  problem.  i am testing it at my house before deploying it to the network.  i have 1 laptop setup with an ip of, and the other is .60.  my router is  i have the ethernet from the router plugged into fa0/1, the 1st laptop on fa0/2 and the other at fa0/3. before i set the vlans up, i checked the communication by just plugging them in and trying to ping, they could both ping each other, the router and  when i finished setting up the test vlans, they could not ping each other(what i wanted) and laptop 1 can ping the router, and  laptop 2 cannot ping anything. 
the only thing i did was create vlan 10 and 20, set port fa0/2 to vlan 10 and no sh, fa03 to vlan 20 and no sh, fa0/1 to vlan 1 and no sh.  then i did switchport mode trunk on fa0/1, and switchport native vlan 1.  this seems to be how i was supposed to do it, but it's been a while since i have worked with switches.  i'm sure it's simple, but after searching the internet and poring over my cisco books for 5 hours, it is turning out not to be the case. here are some details:

greenhouse#sh int fa0/1 switchport
Name: Fa0/1
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q


View 10 Replies View Related

Sharing :: CD Sharing Access Denied Error?

Sep 6, 2011

I have got the same problem but I have tried these steps and no go :(

View 1 Replies View Related

D-Link DCS-942L :: How To Manage Cam Using A Web Browser

Apr 13, 2012

As DCS-942L IP cam is compatible with "NVSCGI APIs" (search this string on a search engine and you will find some useful PDF docs), many features of this IP Cam may be enabled or disabled using any web browsers, for example we can manage the motion detect.


View 3 Replies View Related

D-Link DIR-615 :: Router Window Default On Browser?

Mar 14, 2013

Id like to keep private the fact that im using a Dlink router, for exemple, if someone tries to connect to my network they will be directed to a page with something like,d-link error page Oops! The page you requested is not available

Where can I delete this function, so that there is no page at all shown ?

View 7 Replies View Related

Can't Access Advanced Setup On Browser

Aug 19, 2012

I am trying to set up a minecraft server but I am having trouble port forwarding. I port forwarded a linksysWRT160v3 router but still nobody could connect. So I read online that I might have to also port forward something sitting next to my router. (IDK what it is, i think its a modem or something) It is a Efficient Simon Speed Stream 5100. It says to type in in my web browser for advanced setup but when I did it took me to a search engine.

View 3 Replies View Related

Sharing :: Can't Access File Sharing From Outside?

Jun 4, 2012

I installed windows server 2008 in another country with active directory - DNS server - file services Roles. with public IP.I can RDC the server - I can ping IP local and WAN - I can ping computer name from Local only not WAN.I can access the shared files locally using \IPaddresssharedmy problem is that I can't access \IPaddressshared from outside the network.[CODE]

View 3 Replies View Related

D-Link DCS-942L :: How To Exit Fullscreen Via Local Browser

Mar 25, 2013

I'm not sure if it's different when you log in remotely via mydlink, but by using the web based interface localy (by ip address) I can't find a way of exiting full screen option under live view.  I tried the obvious escape button.  Right-clicking does nothing, and double clicking actually makes it truly fullscreen (aspect ratio gets stretched to my monitor 16:9 btw, instead of retaining 4:3.So is there a way to exit?  Using chrome, maybe it's a chrome issue and it works differently in other browsers but I see no mention in the manual of exiting fullscreen.

View 4 Replies View Related

Cisco WAN :: 815 / Connect To Internet Small Office Where Docsis (internet Over Tv Cable) Is Used As WAN

Aug 12, 2011

I want to connect to the Internet small office where docsis (internet over tv cable) is used as WAN.For similar tasks but other WANs (adsl, dial-up) I used 800 series. But now I can't find anything in this series to solve my issue. There is 815 but it has no wi-fi.
I can use cable modem that my ISP gave to me: this modem acts as bridge so I can use router with FE-based WAN but it is better to have one device instead of two.

View 3 Replies View Related

Copyrights 2005-15, All rights reserved