Sharing :: Delete Archived Email Back To 2009 In Road Runner?

May 3, 2012

How do I delete archived email back to 2009 in Road Runner?

View 5 Replies


ADVERTISEMENT

Wireless :: Remove Road Runner ISP Software

Apr 10, 2011

I was given a Pc that had road runner on it. When I use our ISP IE does not connect, it seems to be looking for Road Runner. How do remove road runner so that I can connect to the internet?

View 1 Replies View Related

Hook Up DLink 150 601 Router To Time Warner With Road Runner Computer

Dec 5, 2012

I'm trying to hook up a D Link 150 601 router to my time warner w/road runner computer but it won;t on DHCP I'm lost as what to do.

View 1 Replies View Related

Clear 4g Wireless Versus Road Runner / Time Warner Cable Internet

Jan 2, 2012

I have a home made desktop I use for work so I use a dsl modem (my laptop wireless ofcourse) I was thinking of switching to Clear...Any thoughts? I have TWC roadrunner and its the 3 way package (net, phone, cable) But I watch my shows online cable is over-rated for us tech nerds...

View 1 Replies View Related

Configure Netgear Router Dgn1000 To Route Time Warner Road Runner Ethernet?

Mar 1, 2012

In order to feed my netgear dgn1000 adsl modem/router with a rca roadrunner modem with ethernet single jack do I enable NAT or not on Netgear router and do I use router as DHCP or not?

View 2 Replies View Related

Wireless :: How To Get Email Back To IPad

May 18, 2011

My mail will not open, says pass word is incorrect, how do I get this to change? I have wi-fi, and I deleted a bunch of old e-mails off of pc. Since I have done this, I can not get anymore mail sent to my iPad. Can you direct me to how to change this?

View 1 Replies View Related

Sharing :: Delete Unread Instant Messages In Yahoo IM?

Oct 23, 2011

how to delete unread instant messages on Yahoo IM

View 1 Replies View Related

Sharing The Email Account In Mircosoft Outlook?

Aug 17, 2012

My company have an email address info@... which we currently have forwarded to a hotmail account and we work out of hotmail. We'd like to step it up a gear and be able to share the email account in Mircosoft Outlook (not Hotmail) across 2 different shops across London so both shops have access to the email address in Outlook. We would ideally like to know when an email has been replied to or deleted .etc. across both shops. We have a website, and web server with our hosting.

View 2 Replies View Related

Sharing :: Send A Word Document Via An Email?

Jul 16, 2011

I was trying to send a word document via e-mail I put the wrong information and now I cant fix it.

View 1 Replies View Related

Sharing :: Attach File To Email Via Remote Upload?

Jan 11, 2012

are there any free services where you can remote upload a file (zip file 25MB) and have it sent to me via email as an attachment. not a link where i have to download the file.

View 1 Replies View Related

Cisco :: DCMA0011 - No Configurations Archived For The Device(s)

Dec 18, 2012

i have few devices in Cisco works, when i try to view their configuration. i get this error.DCMA0011: No configurations archived for the device(s). The selected device(s) should have at least one archived version.

View 1 Replies View Related

Cisco :: Prime LMS 4.2.1 Archived Configurations Disappear

Sep 13, 2012

We upgraded to Cisco LMS 4.2.1 recently and we have noticed that every time we reboot our Windows VM Server the archived configurations from the network devices are no longer displayed. They do not appear in the archive, version tree or directory. We are meeting the minimum system requirements for running LMS 4.2.1 and we do not seem to have found any possible bugs related to this.

View 8 Replies View Related

How To Print To Home Printer When On Road Via A Web Connection

Aug 17, 2011

Internet printing makes it possible for client computers running Microsoft Windows XP Professional with Service Pack 1 (SP1) to use printers located anywhere in the world by sending print jobs using Hypertext Transfer Protocol (HTTP).Additionally, computers running Windows XP can use Microsoft Internet Information Services (IIS) or a Web peer server to create a Web page that provides information about printers and provides the transport for printing over the Internet. We have a small network with 2 printers. (Brother hl5370) and everything on the network works well. I even have one of the printers setup wirelessly and it's printing fine. But I go on the road and generate orders. I need to be able to print the invoices at the warehouse where one of the printers is located so the invoice gets shipped immediately instead of me waiting to get home, print the invoice and pkging slip and then ship it.

I almost always have net access via the hotel's internet or my cell phone, so that's not the problem. I just need to install a printer on my laptop that when I print to it, it sends the document thru the net to the home network and prints to one of the printers.I installed the above mentioned ISS, but have no idea how to use it. Yes, my IP is dynamic, but it never changes unless I reboot the modem so I'm probably okay. And I know there are services out there that can email me my IP so that should not be a problem.

View 6 Replies View Related

Cisco Firewall :: FWSM 4.0 Email Server Cannot Connect To Email Gateway

Aug 8, 2012

I have a question about NAT behavior on FWSM 4.0. The problem is email server (Company A) cannot connect to email gateway (Company B) on the outside network and it randomly happen. I got this error from server guy "Detail: xlate has blocked the connection between A’s mail gateway and B’s mail gateway". It work fine again after clear xlate on firewall. [code]
 
1. How FWSM create xlate table like that? I mean it look like NAT0 for 158.137.21.26 but it doesn't has any nat rule for 158.137.21.26 on firewall.
 
2. What does it mean "connections 24" at the first of line? In the normal time, I only see the connections is 0 like the second line of xlate
 
3. After clear xlate global 158.137.21.26, the first line of xlate table is gone then email server can connect each other. Does is a bug on FWSM? or This is a normal NAT behavior of FWSM.

View 1 Replies View Related

Cisco Switching/Routing :: ATM 8510 Back To Back With 7206vxr 155Meg Only Get 44Meg?

Nov 25, 2012

I have a Cisco 8510msr that is connected back to back with a 7206vxr across a 155Meg connection.I receive lots of Output drops on the 7206vxr interface facing the atm switch. When I do the following command:-

kwdair9#sh atm int atm 1/0Interface ATM1/0:AAL enabled:  AAL5 , Maximum VCs: 4096, Current VCCs: 27 Maximum Transmit Channels: 0Max. Datagram Size: 4528PLIM Type: SONET - 155000Kbps, TX clocking: LINECell-payload scrambling: ONsts-stream scrambling: ON797522 input, 881483 output, 203946630 IN fast, 223768062 OUT fast, 0 out dropVBR-NRT : 110288 Avail bw = 44712   <====  

I only have 44megConfig. is ACTIVEkwdair9# I only get 44Meg of the available 155Meg.There is no QOS on the router and the only commands I can find that vaguely see that refer to QOS are on the ATM switch:-

atm address 47.0091.8100.0000.0007.0d87.b201.0007.0d87.b201.00atm router pnnino aesa embedded-number left-justifiednode 1 level 56 lowest  redistribute atm-static?why this is acting like a DS3 link and not a 155Meg link?

View 4 Replies View Related

Cisco Switching/Routing :: Connecting Two 2951 Back To Back Through A HWIC-4T1 Card

Dec 4, 2011

What cable I need to connect two 2951 back to back through a HWIC-4T1/E1 card ?

View 1 Replies View Related

Cisco Switching/Routing :: HWIC-4SHDSL-E Router Back To Back Connection?

Apr 11, 2013

I have two site that has a copper wire ( 2 wire) connection between each router ( No Telco in between ). Now I want to use 1921 router with HWIC-4SHDSL-E card to connect these two site together. Can I use attach configuration to make the connection reference from the diagram ?

View 1 Replies View Related

Cisco Switching/Routing :: Connecting 2650XM - 2620 Router Back To Back WIC - T1?

Nov 25, 2011

I have 2650XM  router and 2620 Router Both routers have built in WIC  T1 CSU/DSU cards
 
2620Router --
 
2620Router#sh int se0/0
Serial0/0 is down, line protocol is down
  Hardware is PQUICC with Fractional T1 CSU/DSU
  Description: DTE  side
  MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation HDLC, loopback not set

[code]....
 
My question is that cisco website says there are two type of cable connections for this type of config --which are  --T1 CSU/DSU ConfigurationSet one CSU/DSU to clock source internal, and the other CSU/DSU to clock source line. The linecode, framing, data-coding, and timeslots must be set the same on both CSU/DSUs.Four-Wire 56k CSU/DSU Configuration For my network connection which type of config i should use??Secondly i try to connect these ports by normal crossover cable  it did not work.So for this type of connection i know i need T1 cross over cable--  which has RJ 48 connections at both sides.I check cable from ebay which is RJ45 RJ48 cross over  --  will this cable work in my router to router connection.

View 5 Replies View Related

Cisco Switching/Routing :: 2611 / 2801 - Configuration For Back To Back Support

Oct 19, 2012

I have 1 2611xm router and 1 2801 router. For my own lab purpose, i want to configure them back to back to support voice services. I don't know what configuration will be required at each end. in 2611xm, i have NM-2V and its also detecting the card, so i hope it will work ? also what commands i need to run on both ends .

View 1 Replies View Related

Cisco WAN :: 1921 / Connect Two Router Back To Back Via 2 Pin Copper Wire?

Jan 8, 2013

I would like configure two router (e.g. 1921) back to back via a 2 pin copper wire.  Can I use HWIC-4SHDSL-E card to do it? What is the configuration I can use?

View 7 Replies View Related

Wireless :: Deleted Item Email Troy From Incoming Email?

Mar 21, 2011

I deleted an incoming email titled troy from my email inbox by mistake I need to recover this email as it came from my son in bali [URL] edited by moderator: Deleted Email address to prevent Spam

View 1 Replies View Related

Cisco WAN :: HWIC-4SHDSL-E Router Back To Back Connection

Apr 14, 2013

I have two site that has a copper wire (2 wire) connection between each router ( No Telco in between )Now I want to use 1921 router with HWIC-4SH DSL-E card to connect these two ste together.Can I use attach configuration to make the connection reference from the diagram?

View 2 Replies View Related

Cisco WAN :: E1 Clocking Back To Back 3925 Routers

Feb 29, 2012

Just to get this clear as having issues with a E1 link with CRC's at one.Router A,Network-Clock-Participate WIC 1,Should router B have clock participate for WIC 1? We currently have controllers set as UNFRAMED but guess we can set to NO-CRC4 both ends and telco will pass this.

View 1 Replies View Related

Cisco Routers :: Connecting Two RV082 Back To Back

Jan 7, 2013

I'm looking for instructions on how to setup and connect two RV082 routers together with a crossover cable between their WAN ports. This is to connect two separate LANS together via an ethernet connection. For staging we are setting everything up with a crossover cable in our shop.  Ultimately the crossover cable will be replaced by a microwave link between the two LANS several miles apart.  There will be no internet connection.

View 7 Replies View Related

Cisco WAN :: 1841 Securing E1 Back-to-back Connections

Aug 28, 2012

securing a back-toback connection using E1.The connection is between two cities, using 2x CISCO 1841 router + VWIC-1MFT-E1 interface at each city.
 
The E1 connections has been provided by our local telco, and they are completely private. The customer is a bank, and they asking me if this is a secure connection or not. If possible, we need to guarantee that no body can get access to the bank network even if they brought E1 modem at one of the ends (telco PoP).

View 11 Replies View Related

Cisco WAN :: Connecting Two 878 G.SHDSL Routers Back To Back

Apr 7, 2013

I searched a lot but couldnt find a clear document about connecting 2 G.SHDSL routers back to back.First of all I am not sure which type of cable (RJ11) is used for connecting two 878 routers. Does it have to be cross or straight cable.
 
Which RJ11 pairs will be connected each other [code]
 
According the configuration samples One router must be CPE and the other must be CO for simulating DSLAM.

View 2 Replies View Related

Cisco WAN :: 888 SHDSL Routers Back To Back

Dec 15, 2011

I'm having some trouble getting two Cisco 888's to work correctly back to back.. The two routers will ultimately be used in conjunction with a BT EPS8 circuit which is effectively four wires short distance between customer sites. We have configured lots of these using the older Cisco 878's.
 
Anyway, as i've been struggling to get line sync on site I've gone back to basics and connected the two 888's back to back. However, I've found that no matter what I do I can only get the routers to sync at 384kbps!? And that's with a one meter RJ11-RJ11 cable.. Very strange. When we've used the 878's we get much more bandwidth. I have tried statically assigning the line rate at both ends but it still only works at 384kbps.

View 3 Replies View Related

Cisco WAN :: 2901 Back To Back BRI Using WIC-1B-S/T-V3

May 26, 2013

I am setting up my lab using two 2901 routers which is running on 15.2 IOS.I am trying to simulate a back to back BRI.BRI Module: WIC-1B-S/T-V3 (x2) one of each router.
 
I followed this amazing document to understand the concept of BRI and configuration. url..but it never says if i can use the module that i have mentioned.
 
Q1. What cabling i need to use to setup back to back BRI using 2x 2901 routers with these modules?
Q2. What cabling do i need to use.
Q3. Is it actually possible to use these 2 modules alone to simulate a back to back BRI..?

View 6 Replies View Related

Sharing :: Setup A Home Network For Primarily Sharing Music / Pictures And Videos?

Jun 22, 2011

I wanted to setup a home network for primarily sharing my music, pictures and videos.I have a PS3 which can stream the video/music and display the pictures from a media server to my TV.I was wondering between NAS and a desktop computer? and wanted to know which was the better or cheaper solution? (2 much 2 ask for both)

Main Issues

--Will NAS work with PS3?

--Incase of a computer, i know i will be able to use logmein or gotomypc to Download files directly to that machine even when im not home and when i do get home its ready to go. Can the same be achieved with a NAS?What else should i consider? i.e. pros and cons of both.

View 6 Replies View Related

Sharing :: Establish A Connection With An Already Existing IPsec VPN For File Sharing

Jul 10, 2012

I am trying to establish a connection with an already existing IPsec VPN for file sharing. I click on the icon and get error messages when I type the correct username and password. I also entered the shared secret key correctly. I do not know where to enter the "group" name that coincides with the key I was given.

View 5 Replies View Related

Sharing :: File And Printer Sharing Settings Reset On Boot?

Oct 4, 2011

I'm in the middle of restoring a Windows XP computer after a drive failure, and on the new system, the Turn On File and Printer Sharing setting has been forcing a reboot and always resets itself to Off after the restart.

View 1 Replies View Related

Sharing :: Prompted To Enter Network Password After Turning Off Sharing?

Aug 9, 2011

Trying to create a network for file sharing, as have upgraded the 'server' (part of a Workgroup, not a Domain) from WinXP to Win7 and experienced problems ever since. Ironically the problems haven't mainly been with sharing files between Win7 and WinXP systems, but between 2 Win7 systems. I bought a new Win7 laptop and tried to connect it to the server, but it hasn't had Read/Write privileges over the files in the Win7 server. Entering a username and password to gain access to the servers folders has not been a problem, and as far as I know, opening files such as documents has not been a problem either. However, when trying to save an edited document, access is denied, and if I try to open an executable file (this is necessary for a node installation), it prompts me for a network password. Every combination possible of username and password from the 2 systems (including '' or 'SYSTEMNAME' before the username) has not worked. I tried syncing the times which was apparently a previous problem, but to no avail. I am unable to access Local Security Policy, as the server is running off Home Premium. I have tried creating a new workgroup, removing and changing passwords, enabling guest access to the network through the Windows Resource Kit Command Shell, creating identical users on both computers, but nothing appears to have worked.

View 1 Replies View Related

Sharing :: Small Business File-Sharing Among Employees

Mar 6, 2012

[code] Basically, we used to use Outlook for our customer management, but after I tried to design a custom form for customers that suited our needs better than Outlook's default form (i.e. we don't need state, country, region, etc. for each customer, and we'd prefer to have spots for Roof, Shingle, Shingle color, etc. in their place), we ended up turning OneNote into our new Customer Management System.Our problem is sharing files, and the security or lack thereof that goes along with it.We used to save all the files to a single computer, and use Windows 7 Home group to access them. That worked okay, but often we couldn't see the file-holding computer, and would have to disconnect/reconnect to the internet.

We recently bought a NAS HD, which actually works a lot better than I expected. Unfortunately, we've learned recently that new employees are not always the most trustworthy. So this is what we are trying to do:We want to set up some type of way for us to save, store, and access files, which allows us to keep track of who has done what (access, save, copy, delete, print, etc.), preferably one where we can set up alerts if certain things happen (i.e. someone copies and pastes the entire thing, or attempts to delete). We've run into the problem where, yes, we want people to be able to copy and paste certain documents, yes we want people to be able to print, but no we don't want someone to be able to print out our entire customer lists, current project lists, etc.This NAS HD (MyBook Live 2TB by Western Digital) could quite possibly have the most ridiculous set up I've ever encountered. I can set up accounts and passwords, but they are completely irrelevant because from "Computer" you can just select the z:/ drive and it will still take you to our files. We just brought on a couple new people, and its like, everyone tells them to come to me in regards to the computers, and I can't even hook them up to the internet because it would give them access to our network, which in turn gives them access to our z:/ drive, which contains every file our company has.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved