TP-Link 300Mbps Wireless :: Using TL-WR1043ND As A Switch?

Dec 24, 2012

Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :

My house has thick internal walls, so WiFi does not propagate easily. I am fortunate to have FTTP. Therefore I have the following setup: At one end of the house there is a Genexis HRG1000 Fibre Optic Modem / Router with WiFi and 4 ethernet ports. One of its ethernet ports links to a Devolo 200Mb homeplug and there is a matching homeplug at the other end of the house which is linked to a WR1043ND. We have tried two configurations each with various settings. If we link into the WAN port it creates a separate network which cannot be seen from the fibre modem end (since the 196.168.1.n addresses are non-routing) and although this works, we cannot stream / transfer files from the PC (connected to the fibre modem by ethernet) to the smart TV connected to the WR1043ND. The TV can "see" the internet and things like iPlayer work. Various other gadgets can connect either by ethernet or WiFi and get successful internet access. Alternatively If we link into one of the LAN ports, AND disable both the DNS service and the DHCP server in the WR1043ND it all appears as one network, but although it is disabled, all the gadgets and computers try to use the DNS in the WR1043ND rather than that in the fibre modem and consequently there is no internet connectivity. We have tried several combinations of fixed and dynamic IP addresses, rebooting the WR1043ND and the PC etc. but nothing seems to work. What does work is giving both WiFi routers the same SID and password so that moving from one part of the house to another with, say, a smart phone transfers what connectivity there is seamlessly.

View 3 Replies


ADVERTISEMENT

TP-Link 300Mbps Wireless :: WR1043ND V1.9 Not Seeing A WD 3TB USB NTFS HDD?

Dec 21, 2012

Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :

Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP :

I have a WR1043ND

Firmware Version:
3.13.12 Build 120405 Rel.33996n
Hardware Version:
WR1043ND v1 00000000

I tried to connect a WD MyBook Essential 3tb hdd NTFS, but it never recognized it. Of course, I connected it with the external power supply.With a 15gb pendrive FAT32 it works OK.

View 14 Replies View Related

TP-Link 300Mbps Wireless :: WR1043ND Very Low Upstream?

Nov 26, 2012

Region : Russia
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :

Region : Russia
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : wr1043nv1_ru_3_13_10_up(120614)
ISP : netbynet

Connection to a router on a cable speed of dowstream-50MBit/s, upstream-3Kbit(!) wifi-dowstream-50MBit/s, upstream-3KbitA cable directly in the personal computer to 70 Mbps there and back.Measured speedtest.net, and as [URL] The matter is that even elementary with an investment it is impossible to send mail - I am connected by different devices-2 of the laptop and 2 smartphones - the same. Technical support of provider already talk sense only in a router. Insertions updated, changed - the same( Firewalls are disconnected, any more don't know what to do and where proceeding speed and all digs-is killed. Russian forum TP-Link is idle.

View 3 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND How To Get Device Pin

Dec 26, 2012

Region : Austria
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :

unfortunately I've lost my device pin and I've reset my device.can I get the device pin on a other way? on my invoice there is no information about that.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: VPN Usage On TL-WR1043ND Without DD-WRT?

Jan 22, 2013

Region : Netherlands
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP :

Is it possible to use a VPN service such as hidemyass on the TL-WR1043ND without installing the DD-WRT firmware?

View 2 Replies View Related

TP-Link 300Mbps Wireless :: Why To Install CFW On Wr1043nd

Jan 25, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12

I just got one of these to replace my old wrt54g. Seems to me a lot of people are flashing theirs with dd-wrt or openwrt. I was wondering why exactly. Unlike the old wrt54g, the tp-link stock firmware supports a lot of features in my view, especially the so wanted QOS. Do the CFW give the wr1043nd more stability or maybe better performance? Or is it about features? What features a CFW would add to the stock fw?

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND Disconnects Every Two Days?

Mar 19, 2013

TL-WR1043ND disconnects every two days

View 7 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - USB Hub With Multiple Printers?

Jan 9, 2013

Region : Others
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

I got a TL-WR842ND to try and decide if i want to buy it. I want to connect a usb hub with 5 printers connected to that hub and use it as print server, would that work at all?

View 2 Replies View Related

TP-Link 300Mbps Wireless :: Use TL-WR1043ND USB Printer For IDevices?

Apr 9, 2013

Region : Germany
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

my new TL-WR1043ND. I've just installed the usb print driver for my HP PSC 2355 and it works fine for the PCs.Currently i'm wondering if i have any chance to also print using my iDevices (iPhone & iPad) in an AirPrint like way? The devices are connected via WiFi.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Way To Forward Port For NAS

Apr 10, 2013

Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : Titanadsl

My router is a TD W8960N v3 which isn't listed here.I've connected a Synology 110j to the router and need to sort out the port forwarding which I'm not much good at. I am finding the TP Link documentation. I did find the page on DMZ but I don't know what that is.

View 4 Replies View Related

TP-Link 300Mbps Wireless :: Connecting To Internet With TL-WR1043ND

Apr 26, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1

I own a TL-WR1043ND. Until recently it has been working like clock work but after a power cut it seems to have lost its settings. Currently there is a WiFi network: both my iMac and my MacBook Pro manage to create a network between them and i can access / transfer files from one to the other without any problems what so ever. My Gmail app on my iPhone also updates emails on this same network. But when i try to browse the web on both Safari or Firefox or check my email on Mail (OSX email client) I am not being allowed to do so. Its as though there is not internet connection. The same thing is happening to my wife when she is using her Nexus 7.

Unfortunately i have lost my DVD with the setup files and I am there for not managing to access the settings of the router. I have tried searching the web to find the downloadable software but it turns out the only ones that i found are for Windows only.The only way to access the web and update my emails etc is when i connect to the modem via Ethernet cable.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: Comcast May Have Destroyed TL-WR1043ND

Mar 28, 2013

Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
ISP : Comcast

I'm sort of used to everything failing every 2 days when a new device shows up due to the DHCP timeout issue that I've posted a workaround to. However, after rebooting everything, NOTHING worked. At all.I could get to the Admin page too.The DHCP address to my Comcast modem was 0.0.0.0 etc.The TP-Link "Detect" feature started saying Comcast was issuing me a "Static IP" instead of "Dynamic".Now, I can get an address from the Modem to my PC.So I cloned the PC's MAC ID.If I reboot the TP-Link 5 or 6 times, it might pick up the Comcast IP once, but no routing happens to the internet.I did try putting the static IP address into the TP-Link to see if I could fake it into getting online temporarily, but no.

And... after hours of troubleshooting last night, the router will not hand out DHCP addressed to any LAN equipment any longer either.Even, if I plugged in my laptop (which worked on the Comcast modem), the IP address it received from the TP-Link was the Comcast Public IP!Not a NATed / DHCP IP address! so I Factory Reset the TP-Link via the Admin page AND via a paper clip at least 4x.There were also no thunderstorms. Both the router and the modem are on a UPS / surge protector.The house is not (usually) haunted.I did try the new Beta firmware but that didn't fix anything.I also "upgraded" to DD-WRT.

View 5 Replies View Related

TP-Link 300Mbps Wireless :: Update The Firmware WR1043ND?

Feb 14, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

Do not we deserve, (their customers), at least bothered to tell us?

View 14 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND WAN Connection Seems To Be Dropping

Dec 5, 2012

Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Region : Canada

I have a T L-WR1043ND v1.9 with the latest factory firmware that I recently purchased. Ran fine for a couple of weeks. Now my WAN connection seems to be dropping. I get an IP and DNS from the ISP but I cannot ping anything (google etc...) past the router. I have to hit the detect button or release and renew the IP in order to gain access. Then after a few hours or a day the issue reoccurs.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND Disconnects Every Two Days?

Mar 18, 2013

Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP :

I have tried to go through the tech support email but no dice. My router disconnects every two days. The sys light will stay solid and require a reboot and my computer connected to the router will be unaffected . I have a 30mb connection with only 2-3 wireless clients on at the same time as the wired. The response I got from tech support email after waiting almost a week without a response was :

Because there's not much we can do to fix the problem right now and TL-WR1042ND is more competent for your network, I suggest you to change for it.

If you still don't wanna change for TL-WR1042ND, change for a new TL-WR1043ND to have a try."

This is answer I get after already asking once why they want me to downgrade for a different router . What exactly the TL-WR1042ND is going to do for me that the one I have won't,but I cannot get a answer.I have no idea what they mean by "competent ", I don't believe my network is anything special and see no reason why the problem would be fixed by downgrading . This is the second router since December I have had and really dont feel like paying another 15$ shipping back to newegg for a refund.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: Cannot Connect Via PPTP VPN On WR1043nd

Mar 23, 2013

Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Plusnet

I'm on a fibre connection from Plusnet and bought the TL-WR1043ND because of the advertised ability to use PPTP VPN to connect to my work server (the supplied Plusnet router doesn't allow it and is locked down).However, I cannot connect via PPTP VPN on this TL router either. I know my VPN settings are correct and I have had a brief search and found others have this problem, but short of installing third party firmware on the router, how to get this router running my PPTP VPN?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: New Firmware TL-WR1043nd Not Working

Apr 12, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : TL-WR1043ND_V1_130325
ISP : Ip dinamics

It worked correctly 2 days and 16 hours.Now, does not surfing in internet.although I can go to web interfaceI turn the gargoyle.The developers of TP-Link me tired

View 9 Replies View Related

TP-Link 300Mbps Wireless :: WR1043ND Usage As Gateway

Dec 2, 2012

Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version : ?
ISP : Guadalupe Valley Telephone Company (TX)

I am a bit of a noobie and am considering buying a TL-WR1043ND router/access point, but I have read that this router will not connect directly to my ISP over DSL.I have fiber optic to my home from a local telephone company. Whether it will or will not act as the gateway to the Internet. If not, does it connect to another router that acts as a gateway to the Internet? Or what?Secondly, do you recommend this model which, considering features, appears to be good value at arount $50, but would like to know what others think about it.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND Unable To Receive Dynamic IP

Nov 26, 2012

Region : Sweden
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : TL-WR1043ND_V1_120405_
ISP : Tele2 (fiber)

I recently bought your router and I am trying to install it.The problem that I get is that when the router tries to get the dynamic IP from my provider, it gets nothing.I have typed in the DNS servers but no go. Without the router, my uplink works fine. The provider does not lock onto a specific MAC adress.

View 8 Replies View Related

TP-Link 300Mbps Wireless :: Slow Connection With TL-WR1043ND Router

Apr 24, 2013

Region : Malaysia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.13 Build 120605 Rel.38634n

The connection is slow when I connect my notebook to the TP-Link TL-WR1043ND wireless router. If I connect my notebook directly to to the ISP modem, the connection speed back to normal.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND / Connection Drops Out Randomly

Jan 19, 2013

Region : Austria
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP : TPG

I've got a problem with the wireless dropping out randomly. It may take a week before it stops or a couple of hours. I originally thought my microwave oven was swamping the signal when we used it so I relocated the router much further away but this hasn't changed anything. I can still log in to the router from a computer on the wired ports and reboot the router. It also thinks the wireless is working but everything looses connection to it. We have 3 laptops and 4 phones that use the wireless and they all cannot connect when it goes down. This is only a new device - less than 6 months?

View 5 Replies View Related

TP-Link 300Mbps Wireless :: Unable To Disable UPnP In TL-WR1043ND?

Feb 28, 2013

Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Comcast

Why am I unable to "disable" the UPnP in my TP-LINK TL-WR1043ND wireless router? When I click on the "disable" button nothing changes. I click on the "disable" button that then click of "refresh" and it still doesn't change to disabled.

View 3 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Cannot Connect To Any Device Wirelessly

Jan 6, 2013

Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmwar Version :
ISP : AT&T

I recently got a new modem from AT&T. I hooked it up and everything worked fine for a few days. Last night some friends came over with their wireless devices (iphone, ipad) and after a while, the internet got really slow. Then it was unresponsive but it said that we were still connected to the network. So I decided to restart the router. Once it was finished rebooting, we were not even able to connect to the network at all. Even on my computer downstairs I was not able to connect wirelessly. I am connected via ethernet from the router right now on my computer upstairs and that is working fine. I have tried rebooting the router to factory settings, unplugging the modem, rebooting the modem, unplugging the modem, changing the router settings, pretty much every practical solution for simple connectivity issues.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Vista Can't Find Router

Nov 19, 2012

Region : Sweden
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP :

Have just bought this new router and it works faultlessly on all laptops and mobile phones in the house except for a laptop running Vista, the TCP IP properties look all right, it asks for a username and password ( only if connected by an ethernet cable, otherwise it cant access a network) but they are not accepted, the same username password was accepted for al the other computers

View 3 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND Doesn't Recognize Anything In LAN 1 And WAN Ports

May 14, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

I've been using this router for almost 2 years and it has been excellent but since 2 weeks ago it has stopped recognizing anything connected to the LAN port 1 and the WAN port, so it becomes useless as a router because I cannot connect a cable modem. The cable modem was tested successfully with a direct connection to a computer but it doesn't work with the router, and also ANYTHING you connect to these ports on the router is not detected, the lights do not turn on.

View 3 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Print Server Not Working

Dec 18, 2012

Region : Spain
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 121210 Rel.73912n (Beta)
ISP : BT - Arrakis (Spain)

I am trying to get the print server functionality working but no luck. I have a Brother HL-2030 and I know that it is not in the compatibility list. But the HL-2040 is, and the differences between the two are minimal. However, the TP-Link printer utility does not see the printer and the network scanner function is grayed out.

View 7 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Devices Working On New Firmware

Jan 28, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1.8
Firmware Version : wr1043nv1_en_3_13_12_up_boot(121210)_UN_beta
ISP : fibertel argentina

The TP-Link managers surely have read the constant complaints about the performance of the WR1043ND, are innumerable and of all kinds, but especially, due to instability.There are two beta versions, but they are very unstable.I beg, TP-Link, keep us informed on the development of the new firmware.When I bought this router, I was hoping a correct performance.

View 3 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Router Looses Connection To WAN?

Mar 1, 2013

Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : AT&T

Every 5 to 7 days my router loses connection with WAN (ISP modem) but connection over LAN is fine. It seems that 1043ND tries to connect to DSL modem from AT&T by username and password (that does not exists) instead of doing Dynamic IP. I understand that AT&T modem is of type of PPPoE but there is not a password or user id and connection must be dynamic. Page 192.168.0.1/logininfo of modem complains that I was trying to login with incorrect user id password. Every time I have to

1- connect the modem directly to my computer so the modem resets.

2- I have to reset 1043ND to factory default, reboot, and connect cables back how they were, Then go to WAN page do a release and renew to get connected to WAN again.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - How To Reboot The Router On Schedule

May 6, 2013

Region : Netherlands
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP :

I have a flaky internet connection, and it drops every few days. I've thus far powercycled my router by unplugging and plugging it back in, which fixes the issue.

I'm traveling soon, and would like to be able to have access to my stuff remotely, even after the connection drops.

I have two ideas:Run a script in Windows 7 which would soft reboot the modem - free, not sure if soft reboot is enough though. If that doesn't work, Get a hardware which would powercycle the router - haven't researched if these are readily available and cheap

Is there a way to schedule a soft reboot of my router using Windows system tools? I'd schedule it to reboot every night.

View 9 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND Crashing When Downloading Torrents

Jan 20, 2013

Region : Romania
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP :

I have a problem with this router TL-WR1043ND (i have the latest firmware version), when i try to download torrents on wireless the wireless signal crashes after a few minutes.. in order for the wireless to work again the rooter needs a reboot.The other PC, that is connected via the cable

View 10 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND / Second VoIP Call Breaks Up?

Feb 7, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V7
Firmware Version : 3.13.9 Build 120201 Rel. 54965n
ISP : Avonline / Tooway

I can successfully make and receive VoIP calls via a Cisco SPA 303 IP phone, my iPhone 4S and a sogtphone on my MacBook PRO, using both DrayTEL and Sipgate as ITSPs. The Cisco phone is one of seven connected through the 3CX PBX software; but the iPhonne and the MacBook bypass the PBX and connect directly to the ITSP via the TP-Link router and the staellite modem.However, when I try to make or recive a second (simultaneous) call, both calls start breaking up.This happens both with the Cisco phones and with the iPhone and MacBook; so it's not a problem with the Cisco phone or with the 3CX soft PBX, since neither of these is involved when using the iPhone and the MacBook.I have tried various port forwarding configurations over the last few weeks, but still the problem persists. The current forwarding arrangement is ports 5060-5080 and 5090 and 9000-9049 for the PC running the 3CX software, and ports 5160-5180 for the MacBook. The iPhone has sipgate.co.uk set as both the Local and the External PBX IP, and the PBX port is 5060. The Local SIP port is 5964 and the Fisrt RTP port is 4000.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND Slower 5 Times Than Without Router?

Dec 16, 2012

Region : Others
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Baltcom TV

I have very low speed with router.First test without router - using cable directly to PC (DLINK DGS-3210 Managed SW - > My PC), here is result : Second test, using WR1043ND router (DLINK DGS-3210 Managed SW - > WR1043ND Router -> My PC), here is result : First of all, i thought that maybe WAN port is 100Mbit mode, but after i checked it on SW - port is still in 1Gig Mode (from router to PC, it is also 1Gig)Also downloading speed have same picture...Without router i get around 55MB/s, with router max that i saw is ~14MB/s....

View 6 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Safe To Downgrade Firmware?

Feb 17, 2013

Region : Hongkong
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 120405
ISP : Netvigator Broadband (18Mbps ADSL)

I'm having a problem with my TL-WR1043ND becoming non-responsive after a few days of uptime.This is actually my second 1043. I bought it because my first one (hardware version 1.4) has been rock solid -- I've not had to reboot it for over 2 years. (I don't have its firmware version handy at the moment, but I recall it's from 2010.)I needed this new router for a second location, but it has not been functioning correctly. It is hardware version 1.10 and shipped with the latest firmware, 120405. is it safe to downgrade the 1.10's firmware to the one that's running on the 1.4? Or is the hardware sufficiently different (e.g. different bootloaders)

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved