TP-Link 300Mbps Wireless :: WR1042ND - Firmware Upgrade To 3-15-4 Failed

Feb 10, 2013

Region : UnitedKingdom
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3-14-4 to 3-15-4
ISP : Primus Saver

I had it all working fine, then I wanted to upgrade the firmware. The original firmware was 3-14-4. I downloaded and applied the 3-15-4 firmware. Now when it powers on the power light is on all the time. Immediately the sys, 4, 3, 2, 1, Internet, usb and wps lights flash once. Then about 5 seconds later the 4, 3, 2, 1 & Internet lights flash once, then a second later the cycle starts again. When I connect it to the PC it starts to make a connection on the NIC, but then the router resets. Model: TL-WR1042ND, Ver 1.3 . Is there a way to reset the firmware or get it working again?

ADVERTISEMENT

TP-Link 300Mbps Wireless :: TL-WR1042ND - Can't Ping By Name

Nov 29, 2012

Region : UnitedStates
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : WR1042ND v1 00000000
ISP : comcast

I have a machine called 'survtest' on my lan with a permanent ip addr of 192.168.0.112. I can't ping that host by name from any other machine on the lan, although I can ping the ip address. Not only that but this machine appears in the DHCP client list within the router with its name 'survtest' and correct IP addr.

There is another machine on the lan called 'bsd' that also has a permanent IP addr of 192.168.0.110. It can be pinged by name from any other machine on the lan. However it does not show up in the DHCP client list at all.

Neither of these machines can be pinged by name from within the tplink admin diagnostic screen.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1042ND Won't Send Out Email

Jan 24, 2013

Region : Canada
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.12.22 Build 120424 Rel.39632n

I have a WR842ND with firmware 3.12.22 Build 120424 Rel.39632n. I can't seem to get the mail log emailed out. I've tried hotmail, gmail and ISP email ids. I know these will work as I've done it with my NAS and other routers. When I'm in the System Tools/System Logs/Mail Settings I have authentication enabled and I know I've put in the proper information including mail server outgoing mail names EG. smtp.live.com for hotmail.

I don't see any place to identify a non standard port IE. not port 25, to use. So when I try to send I get the Userid or password is wrong message. Do I have to configure something else.

View 5 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1042ND Loses All Connections?

May 6, 2013

Region : Others
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : TL-WR1042ND_V1_130117
ISP : Optic konvertor DHCP mod

I bought TL-WR1042ND and I have problem. After 2 hours, the router loses all connections. Lights that everything is OK, but he can not connect to any site on the Internet or LAN. Even nor to 192.168.0.1 Only search for the host.

I have a DHCP internet. DNS 8.8.8.8 I disabled firewall and all I do not need, but nothing worked.

View 3 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1042ND How To Configure Virtual Servers

Nov 9, 2012

Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1

I have read how to configure the Virtual Servers - Forwarding url...and added two entries, one for port 44612 and one for 32680 , my pc ip is 192.168.0. 100.Before I installed the router (my pc was connected directly to the lan connection) all was working just fine.And I double checked that the ports are not being blocked by firewall.

View 4 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1042ND - Media Server Not Showing File Extensions

Nov 28, 2012

Region : Ukraine
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.15.1 Build 120618 Rel.41178n
ISP :

I'm having the problem to playback video files from Media Server on Samsung TV.And i found out the problem, that media server showing video files without extensions as avi or mp4.Windows Player somehow recognize video codec and container without extensions, but Samsung TV doesn't.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: WR1043ND - Printer Controller / Upgrade Firmware

Feb 22, 2013

Region : Others
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 1.8
ISP :

Region : Israel
Model : TL-WR1043ND
Hardware Version (On the back cover): V1.8
From web interface:
Firmware Version:3.13.4 Build 110429 Rel.36959n
Hardware Version:WR1043ND v1 00000000
ISP : Free

1. about USB Printer Controller

I connect my printer HP office jet 5610 All in one, his drivers installed on my computer (windows 7 ultimate, 32 bit). Irun the software "USB Printer Controller" and i didn't seeing anything. Can not click on any button. BTW, i changed the IP range from 192.168.1.1 to 10.0.0.100-10.0.0.139 and my router web interface at 10.0.0.140, if it's changing something.

2. About upgrade the router's firmware, it's safe that I'll upgrading it?

The last version : TL-WR1043ND_V1_120405

View 1 Replies View Related

TP-Link 300Mbps Wireless :: WR1042ND System Light Turns Solid Overnight While There Is No Activity

Feb 18, 2013

Region : Canada
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3.14.4

Recently in the morning the router will have lost ability to connect to internet <internet light is on> and I cannot access the router page <sys light solid> from either wired or wireless connections. Why is this and will it be solved if I upgrade firmware?

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1042ND / Download Speed Becomes 12MBs To 2MBs Without Apparent Reason?

Dec 17, 2012

Region : Spain
Model : TL-WR1042ND
Hardware Version : v1
Firmware Version : 3.15.1 Build 120618 Rel.41178n
ISP : ONO

I have a wired connection to 12 MBs and is very stable.My problem is that the download speed becomes 12MBs to 2MBs without apparent reason.It is fixes if you restart the router.Here will show you the optimal speed of connection.

[URL]

When this happens again i'll show you the speed.

View 6 Replies View Related

D-Link DIR-655 :: Boot Failure After Failed Firmware Upgrade Through Chrome

Feb 12, 2011

I've tried to upgrade firmware through chrome, but chrome abruptly shut down during upgrade.Since that, I have not even loggin set-up menu which should be shown up putting 192.168.0.1 to make it back. Amber light is just blinking on Power lamp.

View 2 Replies View Related

D-Link DIR-655 :: A4 1.32NA Will Not Upgrade Firmware / Upload Failed Error

Dec 25, 2011

first one had to get rid of because just wouldn't work with a 3CX server, anyway, I have a DIR-655 A4 factory shipped with 1.32NA I am trying to update the firmware to 1.34NA but it will not let me. It keeps saying Code:

View 6 Replies View Related

Linksys Wireless Router :: WRT350N - Firmware Upgrade Failed

Oct 20, 2007

When upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.

View 4 Replies View Related

Linksys Wireless Router :: Firmware Upgrade Failed - WRT54G V2

Feb 28, 2013

just troed to update FIRMWARE re our WRT54G_v2
 
current FIRMWAREFirmware Version: v3.37.7
 
downloaded and tried to run 130228dl_LINKSYS_FW_WRT54Gv4_4.21.5.000_20120220.bin
 
BUT got msg' Upgrade are failed!;

View 3 Replies View Related

Linksys Wireless Router :: WRT54G-TM - Upgrade To New Firmware Failed

Dec 5, 2011

I'm attempting to upgrade to firmware 5.00.38 for my WRT54G-TM router, but it keeps telling me "upgrade failed" after like 3-4 seconds of trying. It says I currently have firmware: DD-WRT v24-sp2 (06/13/09) mega - build 12288. I've tried restetting to factory defaults before upgrading

View 3 Replies View Related

Linksys Wireless Router :: WRT54GS / Firmware 4.71.4 - Upgrade Failed?

Aug 19, 2012

The label on my router says "WRT54GS" and the current firmware is 4.71.4.

View 1 Replies View Related

Cisco Wireless :: WAP121 Giving Firmware Upgrade Has Failed

Jan 8, 2013

I get the message "Firmware upgrade has failed. Please ensure that valid entries were specified in the required fields." when I try upgrade the firmware rootfs.bin.

View 4 Replies View Related

Linksys Wireless Router :: WRT54G Firmware Upgrade Failed?

Feb 2, 2013

I tried to upgrade firmware (I entered my model number WRT54G and hardware version 2 into Cisco menu and downloded the upgrade file they provided. My version was v2.02.7, downloded file FW_WRT54Gv4_4.21.5.000_20120220.bin . After I run the upgrade it said upgrade failed. After that I can't connect to internet and can't access the router. I tried to reset it and unplug it- no luck. From my PC control panel I see local area connections status connected, but as I said, it does not connect to Internet.

View 7 Replies View Related

Linksys Wireless Router :: E4200 Firmware Upgrade Failed?

Aug 24, 2011

I just bought a Cisco E4200 (from someone on Ebay, so returning is probably not an option).  I was in the process of setting it up when it wanted to do a Router Update.  Unfortunately, it did not specifically say to not do it WIRELESS.  We had a disconnection in the upgrade process.  Now the Power light just blinks.  I can ping it from a hard-wired PC, but cannot get to the Administration Web page to retry the firmware update (I did download it from the site).  Also Cisco Connect cannot connect to the router.
 
Oh Yes, I have tried holding reset button for 30 seconds, unplugging for 30 seconds, and replugging in the router.  I do not get any different results.

View 6 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND - Failed To Verify Router Settings

Feb 2, 2013

Region : United Kingdom
Model : TL-WR841ND
Hardware Version : Not Clear
Firmware Version : 7.1
ISP :

failed to verify router settings

What's wrong with my router?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: New Firmware For TL-WR841N(D)

Apr 22, 2013

I am currently running a TL-WR851ND Wifi Router whith the latest build 3.13.27 Build 121101 Rel.38183n() published last November 2012. Now is there any new firmware?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: Firmware Updates For WR841N?

Dec 31, 2012

Region : UnitedStates
Model : TL-WR841N
Hardware Version : V7
Firmware Version : 3.11.7 Build 100531 Rel. 72021n
ISP :

We received new tablet and smart tv but cannot use them due to connection problems. The tv will not connect to the router and the tablet shows strong router strength but will not connect to the internet. I checked for firmware updates and there are 3. Do I simply install the latest firmware or all 3?

View 1 Replies View Related

TP-Link 300Mbps Wireless :: Update The Firmware WR1043ND?

Feb 14, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :

Do not we deserve, (their customers), at least bothered to tell us?

View 14 Replies View Related

TP-Link 300Mbps Wireless :: New Firmware TL-WR1043nd Not Working

Apr 12, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : TL-WR1043ND_V1_130325
ISP : Ip dinamics

It worked correctly 2 days and 16 hours.Now, does not surfing in internet.although I can go to web interfaceI turn the gargoyle.The developers of TP-Link me tired

View 9 Replies View Related

TP-Link 300Mbps Wireless :: Model Firmware Compatibility For TL-WR1043?

Nov 9, 2012

Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 100820
ISP : UPC

I intend to upgrade my TL-WR1043N router in respect of firmware. Your available firmwares are targeted to TL-WR1043ND types only.Are they compatible or you have different firmware for TL-WR1043N ?

View 5 Replies View Related

TP-Link 300Mbps Wireless :: Successfully Tested Different Firmware For TL-WR841N(D)?

May 7, 2013

Region : France
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : 3.13.27 Build 121101 Rel.38183n
ISP : Orange

I am wondering if it is worth switching to OpenWRT firmware for my TL-WR841N V8.0 ..Has anyone successfully switched to OpenWRT Attitude Adjustment Release (12.09) ? If so are you happy with the features and stability provided ? I checked for the Gargoyle firmware, and t seems there are still some issues with TL-WR841N release 8.0 ... Therefore I am not considering this alternative firmware for now.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Devices Working On New Firmware

Jan 28, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1.8
Firmware Version : wr1043nv1_en_3_13_12_up_boot(121210)_UN_beta
ISP : fibertel argentina

The TP-Link managers surely have read the constant complaints about the performance of the WR1043ND, are innumerable and of all kinds, but especially, due to instability.There are two beta versions, but they are very unstable.I beg, TP-Link, keep us informed on the development of the new firmware.When I bought this router, I was hoping a correct performance.

View 3 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Safe To Downgrade Firmware?

Feb 17, 2013

Region : Hongkong
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 120405
ISP : Netvigator Broadband (18Mbps ADSL)

I'm having a problem with my TL-WR1043ND becoming non-responsive after a few days of uptime.This is actually my second 1043. I bought it because my first one (hardware version 1.4) has been rock solid -- I've not had to reboot it for over 2 years. (I don't have its firmware version handy at the moment, but I recall it's from 2010.)I needed this new router for a second location, but it has not been functioning correctly. It is hardware version 1.10 and shipped with the latest firmware, 120405. is it safe to downgrade the 1.10's firmware to the one that's running on the 1.4? Or is the hardware sufficiently different (e.g. different bootloaders)

View 2 Replies View Related

TP-Link 300Mbps Wireless :: WR1043ND V1 130428 - Cannot Login Since Last Upgrade

May 7, 2013

Region : Others
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 1
ISP :

Since last upgrade to WR1043ND_v1_130428, i cannot log in to the router with neither my user/password, nor the defaults one. Is there any way fixing it without hard resetting the the whole damn router?

View 3 Replies View Related

Cisco Switches :: SRW248G4 Firmware Upgrade Failed / Cannot Restore

Dec 12, 2012

with TFTP upgrade SRW2xxG4_FW_1.2.3.0.ros and WEB interface after the restart, the switch will not start, display HyperTerminal link. You can also restore the switches do not?

View 1 Replies View Related

Cisco Routers :: RV220W - Upgrade To 1.0.4.17 Failed Due To Invalid / Corrupted Firmware

Mar 10, 2013

I have a RV220W running 1.0.1.0. When trying to upgrade to 1.0.4.17 I receive an error: "Upgrade failed due to invalid/corrupted firmware".
 
I found this article: [URL]
 
I assume I have to do a factory reset then an upgrade in order to upgrade properly.
 
If I do a backup running 1.0.1.0, then upgrade to 1.0.4.17, then do a restore, would that put me back to 1.0.1.0?  I'm trying to avoid configuring the router manually all over again. 

View 1 Replies View Related

TP-Link 300Mbps Wireless :: Create Firmware For Hard Drive 4 TB Connection To Router TL-WR1043ND Via USB

Jan 16, 2013

Region : Russia
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n

can You create firmware for Hardrive 4 TB connection to router TL-WR1043ND via USB.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: WR1043ND - Extend Functionality Of USB In Future Firmware For Data Transfer?

Apr 3, 2013

Region : Ukraine
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.11 Build 121102 Rel.51321n
ISP : Volia

Is it possible to extend the functionality of USB in future firmware for data transfer? More detail about the problem [URL]can at least in beta partially implemented increase data transfer USB?I bought this router, and as all users lose .... With the Internet, download files faster than with external screw via USB.

View 4 Replies View Related

TP-Link 150Mbps Wireless :: WR641G / Can't Upgrade The Firmware

Feb 8, 2013

Region : Romania
Model : TL-WR740N
Hardware Version : V3
Firmware Version : 3.8.2 Build 080628 Rel.37228n
ISP :

I have a problem with my tplink router. In first of all I can't find my model in this forum. I have TL-WR641G [108M] and I cant upgrade my firmware.

My current firmware is:

Firmware version: 3.8.2 Build 080628 Rel.37228n
Hardware Version: WR641G/642G v3 081520C2

I tried to download the latest firmware from this page (V4) [URL] I press browse button from web interface, I select wr641gv4-en-up.bin and I press Upgrade but nothings happened. I read on other forums this router have 1MB internal memory and wr641gv4-en-up.bin have 1.07MB.

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: Can't Upgrade Firmware On TD-W8961ND

Feb 18, 2013

Model : TD-W8961ND
Hardware Version : V1
Firmware Version : 100722
ISP : Talk Talk

I've downloaded the firmware update 111125 and followed the instructions. The progress bar reaches 100% but the router doesn't seem to restart (judging by the status lights on the front). It does ask me to log back in but when I check the firmware version, it still reads 100722. I also tried factory default settings after the update. Still it reads 100722. I've tried the update 3 times now.

View 3 Replies View Related

D-Link DCS-930L :: Firmware Update Failed / Timed Out

Jul 1, 2011

I just downloaded and tried to apply the latest Firmware update to my dcs-930l.  It failed or timed out.  Now the camera is unusable.  I tried the hard reset, several times, holding it in for 10 seconds after 3 seconds did not work.  I held it in for 3 seconds, waited 1 minute, and just got a flashing red light.  I did the same thing after holding reset in for 10 seconds.  I have unplugged and replugged in the network cable on both ends several times and turned the power off and on on the router and camera several times.  The camera only blinks with a red flashing light.  Is it a brick now?  Is there any other magic tricks to try? 

View 7 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND - Unable To Upgrade Firmware To V5 For It

Apr 29, 2013

Region : India
Model : TD-W8951ND
Hardware Version : V4
Firmware Version : 4.0.0 Build 120607
ISP : Airtel[/COLOR]

I have wifi connectivity issues. After continues usage the wifi connection fails suddenly. And doesn't work till I restart it.

View 2 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR 3600 Firmware Upgrade?

Apr 14, 2013

Region : Canada
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP :

I'm wondering if I can install this version of the firmware: TL-WDR3600_V1_130320

It says: Notes: For TL-WDR3600(UN) V1 What is that (UN) version exactly ?

View 5 Replies View Related

TP-Link Dual-Band Wireless :: WR2543ND - How To Upgrade Firmware

Dec 28, 2011

Region : Bulgaria
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version :
ISP :

Region : Others
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.6 Build 110923 Rel.53137n
ISP :

I bought the TL-R2543ND. The hardware version is V1.2. I want to ask, is there firmware upgrading for this version . Here I see only version V1. [URL] Are they suitable for my router?

View 1 Replies View Related

D-Link DCS-942L :: Setup Fine But Failed Firmware Update

Jan 17, 2012

Had just purchased a new DCS942L unit and had it setup fine.  Registered it on the web and the web  stated that it needed a firmware update.  Connected with hard line and started update.  After 5min webapp said device timed out.  When I went to rest camera could no longer get a connection of any kind.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 / Upgrade Router With Firmware?

Feb 21, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 1
ISP : cox.net

I have downloaded the file TL-wdr3600_v1_130129.zip. Extracted the file to a temp folder. Thje file is a bin file which is a bin image wdr3600v1_en_3_13_26_up(1301).bin. I do not see any flash file to load this to the router.

View 7 Replies View Related

TP-Link Dual-Band Wireless :: IPv6 For TL-WDR4300 (Firmware Upgrade) - How To Use It

Apr 20, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Comcast

just upgrade to the latest firmware and was checking to see if I had IPv6 going with the router but it seems like it's not enabled?I went into my local area network properties and it shows checked and obtain automatically.went into the router ipv6 support tab and it shows:

IPv6 Status
WAN
Connection Type:
DHCPv6
IPv6 Address:

[code].....

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - Firmware Upgrade Wipes Configuration

Feb 13, 2013

Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

After setting up the newly arrived router, renaming the SSID and changing password for 2.4 GHZ AND 5 GHZ and also renaming the default router username and password, I decided to update the firmware.The procedure wiped all configuration I've made forcing me to do all over again.

View 3 Replies View Related

Tp-link Dual-band Wireless :: Tl-wdr4300 / No More Wifi After Openwrt Firmware Upgrade?

Apr 29, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : OpenWRT
ISP : Comcast

I was having major stability issues with my TPLink WDR4300 and after a little bit of research, decided to upgrade the firmware to OpenWRT. I found a post online and followed these instructions:

1- Make sure your router is version 1.x (x can be any number).

2- Download the openwrt firmware from here: [URL]

3- Download putty command tool from here: [URL]

4- Login to your router config page (192.168.0.1) using internet explorer browser and update the firmware to openwrt. Use the firmware file you downloaded in step 2.

5- Now open Putty software you downloaded in step 3. Enter host name: 192.168.1.1, Connection Type choose: Telnet. Now click open. Now you will see the command line with black screen,

6- Now type "passwd" into the command line and press enter on the keyboard. Now choose your new password to access the router make sure password has letter and number. Repeat type password and press enter. Password should be changed now.

7- Type into the command "opkg update" and press enter on keyboard, Wait for it to do some download and updates. Once finished, type this "opkg install luci" and press enter

8- Type this into the command to enable luci "/etc/init.d/uhttpd enable" and press enter on keyboard.

9- Type this into the command "/etc/init.d/uhttpd start" and press enter on the keyboard. Now you can close Putty.

10- Open internet explorer in the address bar punch in: 192.168.1.1 and use the password you created to login to the router config page. Go to the wifi section and turn on the wifi and set up wireless security network.

Everything worked fine until I got to the last step and go to the "wifi section and turn on wifi." After a bit more digging, I noticed that there is not a "Wifi" option under the 19192.168.1.1 portal "Network" tab. After getting frustrated and more hours trying to figure it out, I elected to try and go back to stock firmware. On Luci, I selected restore to factory settings and the router did its thing and restarted. Now I can't login to Luci (obviously) since it was no longer enabled in Putty. I try and run Putty to connect to 192.168.1.1 and it just opens and immediately closes. It will not connect. I also can no longer login to (192.168.0.1). Further, when I try and run the TPLink setup disk,I receive the error "Please check the network connectivity" and "Please check the model of your router." The Wifi light on the router does not turn on (it is switched on). I'm stuck and don't know what to do! I use this router in a home office with multiple wifi users.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Error Code 4503 Firmware Upgrade

Dec 15, 2012

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 120926
ISP : ADSL24

Just bought new router TD-W8968 and tried to do a firmware upgrade to latest version but keep getting Error code: 4503

Have even tried an older version thinking maybe I had to do that one first but got same error code.

View 3 Replies View Related

ADVERTISEMENT