TP-Link 3G/3.75G Router :: TL-MR3040 Doesn't Work With Windows 7 Machine
Mar 18, 2013
Region : Germany
Model : TL-MR3040
Hardware Version : V1
Firmware Version :
ISP :
Just got TL-MR3040 from amazon, not very happy that it is version 1, they could at least mention it in the description, but whatever...The problem is, i can not make it work with my PC laptop(thinkpad x120e with Windows 7 64 bit). Which means,1 not possible to get into web interface to configure it, and 2 if i configure it with old powerbook (os x 10.4) to share internet from usb stick, i can connect to it's wireless network but it doesn't share internet with my pc laptop,while mac and ipad working perfect...I've try to log in into web interface through the cable, still no luck...Not sure i want to re-install the whole system on my laptop just to see if it will change anything, it works with any other router, and usb sticks...
View 3 Replies
ADVERTISEMENT
Mar 4, 2013
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Celcom
Isn't MR3040 is supposed to work without battery with just AC power? Mine works fine with battery but without battery it keeps on restarting..
View 6 Replies
View Related
Dec 18, 2012
Region : Portugal
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Optimus Kanguru (LTE) www.kanguru.pt
I have a modem huawei E392u-12 from the service provider optimus kanguru, url..., and i would like to use my usb modem with this router i have. the router identify the modem but does not conect. i have seen that the bin files available are just for vodafone and TMN, what can i do so i dont have to buy another equipment.
View 4 Replies
View Related
May 10, 2013
Region : Others
Model : TL-MR3040
Firmware Version: 3.14.4 Build 121017 Rel.62268n
I have purchased TL-MR3040 especial for share my 3G account . I have connect it by ethernet port and made setups and it is in 3g/4g only mode. In system checks my modem indicated as " Identified" the modem is a Huawei E160E . My notebook and tablet connects by wireless connection to TL-MR3040 but the router does not dial ISP number *99# . The led on usb modem continues flashing. the 3G modem works perfectly with my notebook and tablet and I use the same parameters for TL-MR3040 with tablet. But most of the parameters don't exist on setup pages of TL-MR3040 . [code]
View 6 Replies
View Related
Feb 1, 2013
Region : Peru
Model : TL-MR3040
Hardware Version : V1Firmware Version : latest
ISP : Movistar
Is there any chance to make work HUAWEI E303C with MR3040?I know this model is not in the compatibility list, but when I try connect this modem with the router, it can be identified but it cant be connected. On the logs it appears that there is a problem with dial, APN, but I'm sure I'm introducing the correct values?
View 1 Replies
View Related
Feb 3, 2013
Recently I bought a Windows 8 (64bits) computer, which is now part of my home network, but it has problems with Shareport. The other computers can be easily connected to a USB printer on my DIR-825 (HW B1) router, but the W8 computer refuses to completely install Shareport (both the CD version and the latest download v1.17). I also tried Shareport-Plus v4.11 (found on the DIR 835 page), which did install correctly, but was still unable to see the USB printer. What can be done? Can D-Link provide a new version of Shareport?
View 3 Replies
View Related
Jun 7, 2011
I have the e4200 and I am having trouble getting DHCP reservation to work properly with my Windows 7 machines. Perhaps there is a step that I am missing. Basically I go to the DHCP reservation setup page, select my machine and add it to the reservation table. Then I save the changes. As soon as I do this my computer goes offline. If I reboot my machine, it is still offline. I've tried the same procedure to reserve the IP address for my phone and it works fine so I wonder if the problem is with Win7.
View 6 Replies
View Related
Jan 23, 2011
I have an XP and a Windows 7 on network (put them in the same Group). I can see the Win7 machine on the XP computer,, accesss files from it. But the XP computer does not show up on Windows7. File sharing was enabled in both. In another post TerryNet asked for the following info (nbtstat -n and IPCONFIG /ALL) from both machines. I thought I will post them assuming I have similar issue as in the previous post. here are the details of these two commands from the two machines.
Windows 7 Machine
==============
C:UsersArun>nbtstat -n
Local Area Connection:
[Code]......
View 5 Replies
View Related
Jan 24, 2013
Region : Austria
Model : TL-MR3420
Hardware Version : V2
Firmware Version : TL-MR3420_V2_121206
ISP : 3
I am using a MR3420 V2 together with a E398 modem. The connection works well, but I can't do any port forwarding (virtual server). Using another router (Tiny Dovado) with the same E398 modem works flawlessly to forward ports.
View 14 Replies
View Related
Dec 24, 2012
Region : India
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : Reliance
I've just set up a MR3420. It works fine in "WAN only" mode and provides access via our ADSL modem. It also works fine in "3G only" mode and provides access via a Reliance Netconnect+ USB modem (a Huawei E150 I think). I updated the firmware to the latest version in order to get it to work with the USB modem.
The problem I have is that when I set it to "3G preferred" it doesn't seem to connect over 3G. I can see it tries to connect but then fails and then WAN takes over. The connect and disconnect options are greyed out on the 3G page so I am unable to manually get it to retry. I've tried leaving it for a long time but it doesn't seem to connect over 3G ever. I've tried setting 3G to connect on demand and connect automatically but both behave the same.
View 3 Replies
View Related
Mar 29, 2013
I have a DIR-655 B1 with FW 2.05.I have different computers/phones connected to internet via the router, both via wifi and ethernet. I have Linux/Windows 7/Android and iOS units. Two weeks ago one of my Windows 7 laptops did not connect to internet and I thought it was the computer. I did a lot of troubleshooting the computer, still did not work at home. When I brought the laptop to a friend it work directly. Now I started to think that it was the router that was the problem. On the status page I can see that the machine got an IP address in the "LAN Computers" part. I can confirm in the laptop that it received the same IP address via DHCP.
I have look around in the menus but can not find anything that should make this computer not connect. I can not even login to the router via this computer.
View 7 Replies
View Related
Feb 8, 2013
Region : Poland
Model : TL-MR3040
Hardware Version : V1
Firmware Version : recent
ISP :
I have a tplink mr-3040 modem to use as repeater for my travels in hotels and after 2 monts I was not able to make it to work any time.Whenever I try with WEP, WPA or OPEN - like today - it's always the same problem: I can see repeated network with strong signal, but when I want to connect using laptop or phone connection stop on level of "getting IP address" and never end with final time-out.
View 14 Replies
View Related
May 7, 2013
Region : Italy
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Vodafone IT
Basically, the 3g port is absolutely not working in both devices.I've tried with 4 usb 3g adapter (all huawei and listed under compatible), THEN i bought a MA180 (yes, the TP-LINK 3g usb stick) and even this is not working.The MR3040 if i connect the MA180 simply will blink the MR3040 3g led ONCE, after that it simply does nothing.if i go under the status page on 192.168.0.1 it basically says:"3g usb: Identifying.." and it still stops there for even an hour.Same on the MR3020.
View 1 Replies
View Related
Mar 25, 2011
I installed a Micro Edition of Windows 7. Everything is going properly with it except the wireless internet connection (its driver is installed and working properly as shown in Device Manager), by click Connect and typing the PW, it tries for few minutes then fail in connecting putting a yellow small circle on the wireless icon in Task bar
View 1 Replies
View Related
Jan 4, 2011
Internet doesn't work on my laptop. after getting some worms that prevented me to open any programs, i did a recover from previous back up. but since then my internet doesn't work (with or without cable). wirelessly: my laptop says im connected to the router, but it says that i have no connection to internet. sometimes it says that i m connected to internet but even so when i try to open my browsers (ieplorer or firefox), it just says "unable to connect"With wire: when i trie to connect via a cable directly to the modem, it does the same thing, it says iam connected to the modem but i have limited access, and the browsers say that it can't open internet.i am using windows 7, have a dell computer and a belkin N1 wireless router, and using cable.i tried to restore the winsock using the netsh command, i used winsockxpfix, i used lspfix, i deleted my norton virus program, i reset my router to default, i deleted my cache-cookie-history from the browser, i think my driver are up to date, i check my manager device (they all work), nothing worked.
when i type the command ipconfig, it gives me:
ipv4 adress: 192.168.2.2
subnet mask: 255.255.255.0
default gateway: 192.168.2.1
when i type the "ping yahoo.com" i get:
4 received, 4 sent, 0 lost
my computer works fine and i can go online. i use wire for my computer and try the same wire to my laptop but not working. i tries another cable throught the router but still nothing.
View 14 Replies
View Related
Feb 11, 2012
THE TL-WN722N simply doesn't work for windows 7 64bit?
View 3 Replies
View Related
Apr 16, 2012
I have a desktop and laptop running Win 7 and a WRT54G router. The desktop has a cable connecting to the router, and the laptop is wireless. Both connect to the network and internet fine, but I can't get the Windows 7 homegroup thing to work. Ran thru the troubleshooter a few times and got nothing out of it.
I just got the laptop so I could do programming homework and I'd like to be able to keep things synced with subversion wirelessly. Worst comes to worst I can use a USB key but it seems silly to do that when both computers talk to the same router.
View 6 Replies
View Related
Aug 2, 2011
I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies
View Related
Jul 20, 2011
New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies
View Related
Mar 6, 2013
Region : Spain
Model : TL-MR3040
Hardware Version : V1
Firmware Version :
ISP : Movistar
I can connect easily to internet with TP-Link MR-3040 router and Huawei E173 3G modem, but the router is disconnected or reseted after a while with no reason. it works fine between 5 and 15 minutes, rarely more than 1 hour, and when i see a video or download a large file the reset is almost automatic. This never happens with the Huawei modem connected directly to the PC!
View 1 Replies
View Related
Jan 4, 2013
Region : Others
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.12.11 Build 120328 Rel.63398n
ISP : CityCell Zoom (in Bangladesh)
I bought a MR3040 Router & I have a ZTE AC682 (EVDO) Modem. I found my modem's model in Modem Compatibility List (Other Country, Indonesia & Singapore).
1st time The router showing Unknown Modem.
Then I tried with .bin file upgrade. The Router Showing Identifying .... Then I tried with firmware Upgrade. But Still Showing Identifying ....
My Systems Log as below
code...
View 5 Replies
View Related
Dec 13, 2012
Region : Spain
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.12.11 Build 120328 Rel.63398n
ISP : SPAIN MOVISTAR
My TL-MR3040 router identifies correctly my ZTE MF 110 HUSPA USB MODEM but it doesn't connect to my ISP Movistar in Spain This is the Log of the router:
Log Content
before switch modem vid is 0x19d2 pid is 0x0083
Device vendorID: 0x19d2; productID: 0x0083
handle_card start
mobileCmdReq 328 mobileFormatCmd error
[code]....
View 1 Replies
View Related
Apr 13, 2013
Region : Others
Model : TL-MR3040
Hardware Version : V2
Firmware Version : 3.14.4. Build 121017 Rel 62268n
ISP : CellC
I bought the MR3040 to use only with battery but now my if used with 3G stick E1752 it reboots. If I use a powered hub then it works.
I thought this devive was a mobile device, now it seems I need external power.
View 1 Replies
View Related
Apr 12, 2013
Region : UnitedKingdom
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel 40902n
ISP : Three UK
I purchased a TPLink MA180 dongle to go with my TPLink MR3040 mobile router in the hope that by buying both components from the same manufacturer would avoid any compatibility issues; however despite many hours of trying I've not been able to get these two devices to work together. When I attach the MA180 dongle to the router, the status says that its "connecting", but it never connects (also the light on the dongle flashes to indicate its connecting, and doesn't stay green). Each of the components works independantly, for example if I plug the MA180 dongle into my laptop it connects to the 3G network ok, and if I connect the MR3040 to an ethernet it operates as a wireless router ok - but they don't seem to work together.I've upgraded the MR3040 firmware to the latest release, and reset everything back to the default settings to no avail. When running the quick setup wizard, the router correctly discovers that my mobile ISP is 3 UK, and automatically sets the dial number and APN for this network. I've also tried it with SIM card from a different mobile ISP (Virgin Mobile) and got exactly the same problem.
View 1 Replies
View Related
Mar 27, 2013
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Celcom
There is a website that does not load when the router is in a certain setting. The website I tried to access was url...I have tried the different firmwares and settings and have narrowed it down to the AES encryption.Have tried the original 120328 firmware, works perfectly with all different settings.With the 120822 firmware, it works with all settings EXCEPT when AES is chosen as the encryption method, be it using WPA or WPA2 Personal.
I therefore pinpoint the AES encryption mode in the 120822 firmware to have a bug. I need to use 802.1n with AES, rather than TKIP.Can someone else using 120822, with AES encryption for wireless, verify that this is happening for them too?
View 2 Replies
View Related
Apr 17, 2013
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Idea 3G
I am using TP Link 3040 V1 and whenever I am using it with my IDEA 3G dongle model no E1732 it keep on getting disconnected after 15-20 mins.
When i restart the router again it works fine for another 15-20 mins and then again disconnects.
When I use the dongle directly in my laptop it works fine without disconnecting. So the issue is not in the Idea dongle but in the router.
View 8 Replies
View Related
Jan 21, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : India
Model : TL-MR3040
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Reliance
Configuring my TL_Mr3040 with Huwei EC 150 model USB modem, the modem and ISP name is there in the list , I have configured all (manual/ as well as auto ) methods of authentication as mentioned in user guide.
for more infor , the exported profile from laptop where my modem works fine is
<?xml version="1.0" encoding="utf-8"?>
<utpsdoc type="Profile">
<ProfileGroup type="DialUp">
<Profile name="Reliance" type="" readonly="" device="" user="74831*****" password="74831*****" phonenumber="#777" autoapn="true" apn="" chap="true" pap="false" ip="" dns="" dnsalt="" wins="" winsalt="" imsi="" langid=""/>
</ProfileGroup>
</utpsdoc>
View 1 Replies
View Related
Apr 10, 2013
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3G/3.75G
ISP : MTS
I have bought a wifi usb router 3040 version 1 i.e. 3G/3.75G. The shopkeeper is saying, he doesn't have version 2 i.e. 3G/4G.He is saying we can upgrade version 1 to 2 i.e. 4G.Is the hardware of version 1 and 2 are same?Should I return this?
View 3 Replies
View Related
Jun 27, 2011
Im looking to create a home network with a wireless router.I have three machines, one computer is downstairs connected to the router with an ethernet cable, my other two machines are upstairs and connet to the internet wirelessly through the same router downstairs.I want to be able to connect to my upstairs computer with my laptop and access my files, i have an external hard drive connect to my computer and want to be able to back up to it from my laptop without removing cables.All three machines are running windows 7, the homegroup doesn't seem to work?
View 5 Replies
View Related
Nov 1, 2012
I recently upgraded to Windows 8 with my XPS 16. I know the Intel R 5150 is not working right with Windows 8 just like everyone else I've seen post on various sites when they upgraded. My concern is.. when is there gonna be an updated driver!? You would think if Windows was gonna make it available to upgrade your OS to 8 that they would have all this straitened out. Now I have to get rid of 8 just so I can have WiFi!
View 8 Replies
View Related
Apr 6, 2011
I have win 2008 server as DC, i have installed acs 4.2 on menber server (win 2003) , but it doesn't work, how to let this one work.
View 6 Replies
View Related
Mar 13, 2013
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version :
ISP :
I have a MR3040 and purchased a Huawei E303C data card. After an initial hickup in configuring it the Data card although not on the compatibility list works excellently with the MR3040.
View 2 Replies
View Related
Dec 15, 2012
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Airtel
I have just bought the MR3040. I am using this in India with local ISP Airtel and ZTE MF 880T LTE modem, which normally gives 4G connection when connected directly to the laptop.I have used the normal settings as guided by TP link and checked that dialing properties are all fine. When I am connecting through the MR3040, the blue light is visible in the modem but there is NO internet throughput, the internet icon in the router also remains OFF.
View 3 Replies
View Related
