TP-Link 3G/3.75G Router :: ZTE MF637U Modem Not Working With EDGE
Apr 22, 2013
Region : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version :
ISP : YU KENYA
most service providers in our country dont have 3G or 4G support,but all the same i bought an MR3420 router in the hopes that since my modem is listed,it would still connect even if on an EDGE/2G network like YU-Kenya.But this is not the case,the router does not recognize the modem i.e it says the modem is unplugged but when i look at the logs,it indicated it detected the modem but LTE was set to zero. providing a modem bin file for compatibility under EDGE/2G connection otherwise my router will be of no use to me.
View 2 Replies
ADVERTISEMENT
Dec 30, 2012
Region : Poland
Model : TL-MR3220
Hardware Version : V1
Firmware Version :
ISP : Bite
Router TL-MR3220 works well on 3G network, but is not works 2G (edge) network. 3G network is not suported in my location, only 2G. My modem is Huawei E 173. In location 2G network Router show: 3G/4G USB Modem: Unplugged.
View 3 Replies
View Related
Apr 21, 2013
Region : India
Model : TL-MR3420
Hardware Version : V2
Firmware Version : Problem persists on all three firmware
ISP : BSNL india on EVDO
Today i purchased brand new Tp-Link MR-3420 3G/4G router for my BSNL EVDO modem..as this product is shown to support ZTE AC8700 modem...but it doesnt seem to work.. I put the right dial-up number,user name and password that i use when i connect modem to laptop and left APN field blank...The modem gets identified by the router but it just don't connect to internet,it just keeps saying "connecting.....". Also the signal strength is shown 0%... If your modem is really supporting ZTE AC8700 modem why its not working?
View 2 Replies
View Related
Mar 5, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.57775n
ISP : BSNL EVDO
my BSNL evdo ZTE AC8700 modem is not working with TL-MR3220 V2. The modem is being detected in the router and i have set the Dialing number, username, password. [code]
View 5 Replies
View Related
Dec 19, 2012
Region : India
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version : TL-MR3220_v_2_120822
ISP : MTS
My Hardware version is v2.Just now I bought this router. When I am trying to configure it with default firmware is not identifying the modem itself. So Afyter facing this problem, I updated my Router firmware(TL-MR3220_v_2_120822) and retry the process. But this time, It identified the modem for few seconds, then its changes its trying to connecting, after that its change it state to unplugged. It is doing these steps repeatably. Identifying >> Identified >> (connecting) >> Unplugged. [code]
View 12 Replies
View Related
Mar 25, 2012
I need configuring the dsl-320t modem connected to the dir-600 router. Already tried some configuration, with dhcp enabled and disabled, tried to assign a static ip to the router and tried to put the modem in bridge mode, but fail miserably .Now I've resetted both devices, if I connect with the ethernet cable my pc and one of the four lan connectors on the router, and then use another ethernet cable to connect the modem port with one of the other three free router port, I can connect to internet. Any other configuration i tried has not worked.
View 9 Replies
View Related
Feb 28, 2013
i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI:
VCI: These 2 already came with presets. Should I just leave them?
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA
Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX
Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
[code]...
View 1 Replies
View Related
Jan 12, 2011
I have a Netgear CVD31T modem delivered by my internet provider. I can't change any settings on the modem. My connection speed is 30 gb up and 5 GB down.Until now I used a Linksys WRT54GV ver. 2 router to share my connection between my computers and NAS server and it worked ok. In speed tests I normally get approx 25 - 28 GB speed. To optain more speed on my LAN I want to buy a GB router. And here started my problems. First I tried a D-link DIR655, then a Netgear WNDR3700 and latest a Linksys E3000. I all 3 occations my WAN speed droped drasticaly down to between 3 - 5 GB speed, at under a ping test I have a loss of between 10 - 30 % and time on approx 50 ms.If I connect my PC directly to the modem or re-connect my old router it works perfect. I have tried to replace cables etc. etc.
View 5 Replies
View Related
Oct 9, 2012
my router and modem is working but no internet acess ive try rebooting my router but still noting change...dont know what to do...h
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Userslito lapid>ipconfig/all
[Code]......
View 19 Replies
View Related
Sep 15, 2011
If my ISP brings ethernet into the building via duplex LC multimode fiber can I use the ASA5550 as the first device from the WAN or do I need some type of router for this? I realize I'll need an SFP to get to duplex LC, but I'm not sure if I need a router, or if the ASA can function as a router for this application.
View 3 Replies
View Related
Dec 18, 2011
If my ISP brings ethernet into the building via duplex LC multimode fiber can I use the ASA5550 as the first device from the WAN or do I need some type of router for this? I realize I'll need an SFP to get to duplex LC, but I'm not sure if I need a router, or if the ASA can function as a router for this application.
View 9 Replies
View Related
Feb 8, 2012
I am using a broadband internet of a provider named BSNL,through a simple modem. Recently I got a Beetel 450BX1 ADSL2 + Router and want to use the wireless capability of the laptop so that I don't have to be glued to my table. The OS I'm using is Windows 7 Ultimate (32 bit) on an HP Compaq 6515b.I configured the modem by following the instructions in the following link url...I believe that's a straightforward method for configuring a router, and that accomplishing this is very simple.I followed the steps, only changed the username and password to that given by BSNL.Then, finally I unplugged the LAN cable and clicked on Connect to <connection name>, punched in the serial key. But it does not connect and says "Windows was unable to connect". Even after using Windows Network Troubleshooter the problem is not solved.
View 4 Replies
View Related
Nov 25, 2012
Sometimes my wifi signal will randomly drop and I cannot browse the Internet. The network still appears on my computer and I can connect to it, however Internet pages will not load. This lasts for hours, sometimes days. If I unplug the modem from the router and connect directly to the modem via Ethernet, everything works fine! I have tried unplugging everything for 1 minute then plugging it back in and it does nothing.
View 2 Replies
View Related
Apr 9, 2011
How to configure an Asa that will have a default gateway to an edge router that will be doing PBR? We would like Internet surfing to go out one ISP while internally hosted services in the Asa DMZ would go through the other ISP. configuration examples for both the edge router and the Asa?
View 3 Replies
View Related
Dec 22, 2011
We are replacing a DS3 Internet connection with a 100 Mbps fastE connection from a Tier 1 Provider. I currently have a Cisco 7204VXR with 512 Mb DRAM and 128 Mb of Flash and two 10/100 ports that is connected to the DS3. I also have a 3845 with 1 Gb of DRAM and 256 Mb of Flash with two 10/100/1000 ports available.
We are currently running BGP, below is the summary
BGP table version is 88880414, main routing table version 88880414
379041 network entries using 44347797 bytes of memory
379043 path entries using 19710236 bytes of memory(code)
View 4 Replies
View Related
Aug 21, 2011
Apart from the ability to participate in BGP, is there any reason you should use a router on an internet edge rather than the SG-300 switch?
View 4 Replies
View Related
Sep 4, 2011
Basically, my internet's been fine until about a week ago. I'm currently using the Aztech DSL1000EW router/modem which has been working great up to now. My problem is this: after about 5-30 minutes (time fluctuates, annoying because after 15 minutes of continuous usage you think the problem's solved!) all webpages suddenly become 'unavailable'. I've disabled proxies under LAN settings, tried flushing DNS, resetting winsock with the netsh commands but to no avail. To get the internet to work again, I can just go to my router page, click disconnect and reconnect and it'll work for another 5-30 minutes.
View 8 Replies
View Related
Sep 27, 2011
I have a Linksys WRT54GS, version 6 with Mac OS X (version 10.6.8) hooked up to a Scientific Atlantic cable modem, with RCN as the ISP.
Recently, RCN had some network issues, and so I had to power down and reset my modem. The modem is working fine now -- no problems at all when the Mac is connected direclty to the modem.
The router's network is OK in that I can connect the Mac wirelessly to the network, but I can't connect to the internet through the router (through neither the wireless or wired connection).
I have downloaded the latest firmware update for the router, following the Linksys site instructions.
I did call Linksys tech support on the advice of RCN, and they said that the router does appear to be working (power, WLAN, and Internet lights are on), but they would be charging me nearly the cost of a new router to fix the problem.
View 1 Replies
View Related
Mar 6, 2013
My company has purchased a second ASA for fail over reasons and I'm needing to attach it to my core router (ASR 1001). Currently I'm running the connection between my ASA and my Core as a /19 ie. ASA-10.10.10.2/19 -- ASR-10.10.10.1/19. I know the 2nd interface on the ASR will need to be on a different network segment then the first connection (10.10.10.1/19). What would be the best way to segment this out with out breaking up my /19?
Run /30 segments for each interface? Use a VLan ?
I don't want to use up my Internet rout able IP's on /30 segments. Attached diagram.
View 1 Replies
View Related
Jul 26, 2012
Any router (I'm considering ASR 1002 with 10GE SPAs) that can support the following:
-10GE interfaces
-can handle 1.5Gbps but scales up to 5-6Gbps different seasons
-take on full internet routes from 2-3 providers
-will live on the internet edge
View 7 Replies
View Related
Nov 12, 2011
Wireless Router - DI-514,Modem - Westell 6100, Every time I refresh the 'View available Network settings' My Connection name pops up with other connections but then disappears after I refresh again and others as well disappear, but some stay. Right now I'm using the the wire the blue wire that connects me to the internet.
View 3 Replies
View Related
Jun 24, 2012
I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
View 1 Replies
View Related
Jun 24, 2012
I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem?
View 2 Replies
View Related
Mar 7, 2007
I am at my wits end.Comcast just changed my old RCA cable modem for an Arris Telephony modem.(I had Comcast phone service added)The tech that did the install said the wireless G network was all up and running. (My 3 other computers and printer) Well lo and behold the network does not work at all. I only get internet through my wired computer and cannot access my router through 192.168.1.1 anymore.I tried powering down the router and modem by holding the reset for 30 seconds and unplugging them.
View 9 Replies
View Related
May 1, 2013
We have ASA 5520 firewall.For broadband Internet access, we have T1 Router(edge router provided by ISP) which provides public IP's 198.24.210.224 / 29. We have usable public IP's 198.24.210.226 - 198.24.210.230 with default gateway 198.24.210.225. We assigned 198.24.210.230 255.255.255.0 to the outside interface.
If we connect the ASA 5520 outside interface directly to T1 router, can all packets with destination addresses 198.24.210.224/29 reach the outside interface without using other device like another router or switches?I just assume that only packets with destination address 198.24.210.230(outside interface ip) can reach the outside interface from the edge router.Is it wrong assumption? If it is correct, then is there any way to route all packets with destination address 198.24.210.224/29 to the outside interface?
View 3 Replies
View Related
Nov 27, 2011
I have a cisco 3560 switch set up as my edge router. It is working as my external demarc switch and edge router. It is sitting between the ISP's switch and my ASA firewall. It's a very basic configuration with port 1 set up with a fixed ip and switchport turned off which is connected to the ISP switch. VLAN2 is configured with an IP address and 3 ports, two of which go to different firewalls.
I found that I cannot ping a specific address from the inside interface (VLAN2), but I can from the outside interface Gig0/1. I have a few deny commands in an access list, but they don't apply to the network i'm trying to access, and I haven't had any other inaccessible networks otherwise.
Here's my config minus passwords and full IP ranges. There are two ranges, one with xxx and one with xx. The xxx is set as secondary, but is the one we really use.
Current configuration : 4808 bytes!version 12.2no service padservice timestamps debug uptimeservice timestamps log uptimeservice password-encryption!hostname my-rtr-ext!boot-start-markerboot-end-marker!enable secret 5 !
!!no aaa new-modelsystem mtu routing 1500ip routing!
[Code] ............
View 4 Replies
View Related
May 8, 2013
What is the best way to monitor an Internet Edge router from the Internal network behind the Firewall?We want to pull more information from the edge router like netflow. We can use SNMPv3 and ACLs to keep the router secure.
But I am looking for the best config to keep both the router and firewall as secure as possible while still allowing us to monitor performance and faults.I am running an ASA and a 2821.
View 2 Replies
View Related
Oct 2, 2012
My SIP provider is not convinced that my ASA and Edge Router is not altering the SIP packets. On the ASA I've removed the inspect SIP, and H323, what else needs to be done to make the firewall not mess with the SIP Traffic.
Packets are flowing in/out.
access-list hbg-outside-198_access_in extended permit udp host <SIP HOST> object sfipoffice_o eq sip
access-list hbg-outside-198_access_in extended permit udp any object hbgipoffice_o gt 49152
access-list hbg-outside-198_access_in extended permit udp any object hbgipoffice_o lt 53246
Here are my Policy Maps.
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map type inspect dns migrated_dns_map_1
parameters
message-length maximum client auto
[code]...
On the 3825 Its jsut a pretty simple config that jsut routes packets form one interface to another, all Public Addresses, so no NAT on it.
View 2 Replies
View Related
May 13, 2012
I need to make some changes on our network. We currently have two sites 150 miles apart we join both by way of fiber and on each side we have Cisco 3750 stack switches, configure trunking for all V lans on one port in site one then through the the long haul fiber to site two with site one using 10.1.1.30 and site two using 10.1.1.40 as their default gateway, with static routing all V lan sub nets to the other sites default gateway life is good.
My question - seeing how we have sites using the same sub net 10.1.1.x to trunk all data to each site through switches; we need to now change the network and add each site to the MPLS network, site one switch 1 IP address 10.1.1.30 going to MPLS router one with FA0/0/0 using IP 10.1.1.31, site two having switch 1 IP address 10.1.1.40 going to MPLS router one with FA0/0/0 using 10.1.1.41. I need to know will this work.
We have the same sub net in each site 10.1.1.x to the MPLS routers then the external router interface connecting each site to local switches, will this cause any problems by using the same local sub net for each site?
View 1 Replies
View Related
May 4, 2011
I hooked up with a Linksys WRT110 wireless router to a Zoom modem and my DSL on my desktop and laptop are both working fine. My problem is my phone lines quit working. I plugged a phone into the box outside and I had a dial tone. When you try to call my house it just keeps ringing.
View 1 Replies
View Related
Jun 2, 2012
Set up DIR-615 to act as a router for my modem
View 2 Replies
View Related
Jan 12, 2013
I ordered the D-link DIR-815 router online at [URL], and I'll be receiving it this Monday which is the 14th, so I am asking my questions on here now, so I could be prepared.
1.) I don't have a wireless card in my PC, so I will be connecting wired to get WiFi via WAN and LAN ports, right? First before I forget, I have a Windows 7 32-bit desktop PC. We are working with a DSL modem residential line without phone line using a coaxial cable, and Ethernet cable from modem into the PC. connecting this D-link router to my modem and WiFi, and for me to use the WPA2 security?
2.) I have an iPhone 4 with Verizon. If I want to use my iPhone to get WiFi from the router, and turn off the Internet on my phone, and use WiFi only on my phone, how would this work?
View 6 Replies
View Related
Nov 25, 2011
I have a dir 655 coupled with a 320b modem for adsl. Now I must switch to VDSL. Can I use the router with a VDSL Modem? Which modem could be used ? I do not see dlink products ..
View 14 Replies
View Related
