TP-Link ADSL2+ :: TD-W8901G Wireless Interface Suddenly Missing
Nov 28, 2012
Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version : 6.0.0 Build 120213 Rel.30335
ISP : ETAPA
I am writing in from Cuenca, Ecuador. I have a TD-W8901G Wireless ADSL2+ Modem Router. I have accessed the interface using the default ip address:192.168.1.1.When I select Interface Setup from the menu, it only shows Internet and LAN as the only 2 options. Wireless is no longer there. It just disappeared! The LED indicator light for WLAN is also "OFF." When you try the Quick Start wizard guide, it cannot complete the setup because there is an IP address error.
I have changed the firmware 2x since, trying to remedy this, I have also tried factory resets at least 3x. Nothing has worked up to this point.
View 1 Replies
ADVERTISEMENT
Jan 12, 2013
Region : Others
Model : TD-W8901G
Hardware Version : V6
Firmware Version :
ISP :
problem with filtering
Region : Syria
Model : TD-W8901G
ver 6.0
54Mbps wireless G ADSL2+:
I used the url filter utility inside the router program. I put some url for example www.google.com, I wanted to try the filtering cababilty, Later I deleted all these adresses , but unfortunatley it keeps telling me the following message: "The system returned: (110) Connection timed out The remote host or network may be down. Your cache administrator is webmaster@proxy1."
View 1 Replies
View Related
Nov 4, 2012
Region : India
Model : TD-W8901G
Hardware Version : V6
Firmware Version : 6.0.0 Build 120418 Rel.34102
ISP :
Everytime, I turn on the ADSL2+ wireless modem router, it connects to the internet and my laptop gets paired with the wireless network but after 30 mins time, wireless ADSL2+ router restarts itself and goins in a loop for nearly 5 times and then it gets connected to internet but then I cannot connect my laptop to the the router using wireless with error DHCP failed to assign IP but DHCP is enabled in the router. This has started since a month and I had tried several network change settings but nothing has given me a solution. I do use Kaspersky IS through which the connection flows in. My internet setting is set to use Automatic DNS discovery and most time, I get RC 102 DHCP error.
View 4 Replies
View Related
Jan 10, 2013
Model : TD-W8901G
Hardware Version : V3
Firmware Version : 3.0.1 Build 100901 Rel.23594
ISP : Ttnet
My web browsing/surfing speed decreases when I'm transferring files between other computers which are connected to this modem, and when a torrent client is downloading from 20+ seeds. I want to give the HTTP connections (port 80) the highest priority possible, so that my connection wouldn't delay when non-HTTP connections are active.The interface of the modem related to QoS settings are as below:What QoS settings should I enter (what rule(s) should I define) for giving HTTP protocol higher priority?
Information about my environment:
Modem product ID: TP-LINK TD-8901G
Modem firmware version: 3.0.1 Build 100901 Rel.23594
Modem hardware version: 3.1
My OS: Windows 7 Ultimate x64 SP1 My physical port: Enet1 (Eternet #1)
My local IP: 192.168.1.2
My torrent port: 5002
IP of the computer I'm transferring files between: 192.168.1.4
Physical port of the computer I'm transferring files between: Enet 2 (Eternet #2)
View 2 Replies
View Related
Mar 3, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange
I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.
View 1 Replies
View Related
Jan 15, 2013
Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : AT&T
Everything seems to work fine except that there is no Wireless option in the menu. I updated the firmware and reset to factory defaults, but the wireless option still does not appear in the menu.
View 1 Replies
View Related
Feb 3, 2013
Region : France
Model : TD-W8151N
Hardware Version : V3
Firmware Version : latest
ISP : OrangeF
Received today my modem, configured it with some effort but it works... Now i'm trying to save ma config file (rom-0) using web interface, and when clicking on Maintenance > Firmware, i'm always getting:bug.jpg Seems to be a big bug
View 4 Replies
View Related
Feb 17, 2013
-Region : Poland
-Model : TD-W8951ND
-Hardware Version : V5
-Firmware Version : 5.0.0 Build 120522 Rel.23978
-ISP : Orange/TPSA
Is there any way to change web interface / firmware from orange version to blue version? Blue version has more options and better "System log" presentation page.
View 2 Replies
View Related
Nov 29, 2012
Region : Sweden
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0_1.1_up(120926)
ISP : HessleholmNetwork
My TD-W8968 has begun to freeze up. It had been running for about two hours before this happened. It's a "slow" process that starts with the web interface being unavailable, i'm unable to connect to the modems web interface.And at about the same time it becomes impossible to connect new devices to the wireless network. Right about this point i did a speed test over the modem and performance was abysmal.It was so slow that my web browser believed that it was offline! But i was able to re run the internet speed test once more before it totaly locked up! At this point it was impossible to use the TD-W8968.
This was the,, i don't know,, perhaps the fifth time it happened in a row. It has been running perfect for two months before it began acting up like this.I have done a reset of the modem, didn't solve the problem.I have also done a reflash of the firmware, i've had the latest firmware since i bought the TD-W8968. But the reflash didn't solve it
View 14 Replies
View Related
Mar 13, 2013
Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP :
However, when I initially connect to the router, either on the LAN or remotely via the internet, the router takes a long time to display the initial page (up to 1 minute) and then usually displays the page without any variable data included. Frequently it also fails to show the menu on the left either. By hitting Refresh several times, eventually it will load the page fully.
View 2 Replies
View Related
Jan 31, 2012
I have a TP link TD-W8901g modem router with 1 wan and 4 LAN. My questions is can i use this modem to receive wifi signals through wan and give out through lan. i currently use internet from telephone cable. But i have got a free hot spot near my home. Currently i Am using a pc without wireless card.
View 1 Replies
View Related
Apr 9, 2013
I keep getting disconnected from the game "Vindictus". I'm not sure what protocols it uses, but it shouldn't require any configuration on the Router, since it was working fine before. I upgraded the firmware to 4.13 in an attempt to fix the issue, but it didn't work. Some people have suggested "Endpoint filtering" to be set to independent, but I cannot find such an option. Where is the option? I was told it was on the Firewall page, but it is not there (Advanced->Firewall/DMZ). The router is supplied by Virgin Media (ISP) but I'm not sure if that matters.
View 6 Replies
View Related
Mar 13, 2012
I found out that I cant access my modem (TP-Link W8901G) config page at 192.168.1.1. I was pretty sure my ID and password is correct since I never changed them. It is also unlikely that the password got changed by other people who are stealing my Wi-Fi as I turned my WLAN on only when I requires the connection then it get turned off afterwards.
View 5 Replies
View Related
Jun 4, 2011
I'm expanding my home network and the adsl modem router supplied by my ISP has just 1 RJ-45 port and 1 usb port (and an RJ-11 for the Internet). I have zeroed in on TP-Link TD-W8901G having 4 RJ-45 ports, 1 USB port, 1 RJ-11 port and also it is a wireless router. Currently I would be connecting the above modem router to my desktop running Linux and using the same ISP with ADSL. Considering a future scenario where I may decide to use another way to connect to the Internet like maybe 3G or Cable, etc (with their separate modems) I was wondering if my same modem router (TD-W8901G) could be used as a standalone router for connecting the devices on my home network. Basically, what I want to know is whether this modem router would be able to share an Internet connection from some other source, other than the one provided through its own RJ-11 (ADSL) source?
View 1 Replies
View Related
Jul 19, 2012
A couple hours ago, I set up a temporary AdHoc to share or "tether" the internet connection from a laptop (which got its internet from a router), to my iPod Touch. It worked fine and everything, in fact I was pleasantly surprised by the speed of it. Since it was a temporary AdHoc, I disconnected, and the network was deleted as expected. After a while I wanted to do it again, but when I tried to make the AdHoc, the option to "Share Internet Connection" has disappeared. I'm really puzzled as it worked just a while back, and now even the option is gone. Did some research on it and found out that it's some weird bug that had never been addressed. It had to do with the LAN and Wireless network adapters apparently and one of them had to have the ICS option checked and the other one didn't (something like that). Here are the screenshots of those settings on both my network adapters. Both adapters are enabled, except the LAN isn't "connected" since my primary way of getting internet is through a router connected to another computer.
View 2 Replies
View Related
Feb 12, 2012
I have a Cisco 4402-25 WLC with the below information that is having an interesting issue. When you log into the GUI interface with the local account and click on WIRELESS, then choose a accesspoint it brings up a menu where you have three buttons below for the following options (Hardware Reset - Reset AP Now), (Set to Factory Defaults - Clear All Config), and (Set to Factory Defaults - Clear Config Except Static IP). The problem I am having is we access all of our WLC's using Radius and when you enter your AD username and password and go to bounce a access point the GUI interface is missing the buttons, they however appear fine when logged in with the local account.
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.220.0
RTOS Version..................................... 7.0.220.0
Bootloader Version............................... 4.0.206.0
Emergency Image Version.......................... 5.2.157.0
View 2 Replies
View Related
Apr 12, 2013
Region : Portugal
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.
However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.
I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).
To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.
The router print server is a nice functionality and I really want to use it.
View 1 Replies
View Related
Apr 15, 2011
I have a DIR-825 (B) for over a year now. This morning, the wireless on it suddenly stopped working. Meaning, all my machines not longer seeing the signal from that router. If I hardwire to it, it will work fine. I have check the wireless settings and they all look fine.
View 2 Replies
View Related
Jun 3, 2012
I just loaded the web interface IOS on a C3750X. The first thing I noticed was there was basically no web interface. I can look at things, and do default configurations on ports, but it doesn't appear I can configure VLANs or QoS or anything like that.
Am I missing something, or is this just how the web interface functions?
View 1 Replies
View Related
Feb 28, 2013
Region : Australia
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Im having issues setting up port forwarding with my Synology NAS.
My house is all connected via network cable, going to a main 24-port switch, which is connected to a Modem/Router (TP-LINK in this case). I can access the NAS from anywhere on my home network, send and receive is fine. I previously used a Billion modem/router in the same config and it all worked fine.
The problem is that when going through the Synology setup, it fails to see the tp-link. So therefore I cannot run its port forwarding program to setup all my ports. Which in turn the NAS can't access the internet. I have started going through the port-forward setting on the router interface, and manually entered the ports - i realized that I'm limited to the number of ports i'm allowed to open! I have also run a port testing program, some are successfully opened the others are not.
Is there some button i need to check or switch on the modem?
View 3 Replies
View Related
Feb 25, 2013
Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : TD-W8970_V1_130201
I just bought online a brand new TD-W8970 modem/router but I'm in trouble with getting ADSL working.I set up a PPPoE connection with the settings from my ISP but the ADSL Led on the device is solid OFF and in the Admin section it says DSL Status: Not Connected.
[code]...
View 5 Replies
View Related
Apr 16, 2013
Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP : Virgin
I've just replaced my aging ZyXel Wireless Router with a TD-W8970 which connects to the internet with no problems whatsoever. However, I have an ethernet connected Western Digital MyBookLive NAS which is happily allocated an IP addess but does not show up on my network on my PC (Windows Vista - fully patched). A usb connected pen drive and exactly the same. Am I missing something blindingly obvious? On the ZyXel the NAS worked with no problems whatsoever.
The problem with the NAS was my internet security Bitdefender. For some reason, on installing the TP-W8970, it switched my firewall status to public from home/office. Corrected that and the NAS can now be seen over the network. This does not fix the USB attached pen drive not being seen problem though.
View 2 Replies
View Related
Apr 17, 2013
Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
According to inSSIDer the router seems to be using two wifi channels (10+6) and inSSIDer is recommending to move to a standard channel (1,6,11).
View 1 Replies
View Related
Nov 8, 2012
Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : BT Broadband
Just got myself a new Modem/Router (TD-W8960N), and it wasn't until I had it all up and running that I realised it didn't have USB port on the back.Anyways, I was wondering how I could go about fixing this? I stumbled upon this (TP-Link TD-8817) on Amazon and wasn't sure if I could attach this to it in bridged mode or something. This has the USB socket I need. If this was all I needed, how do they connect together? I have a BT connection btw.Also, I have a Justop Android 4.0 TV Box (media player). Would this be able to see the HDD for streaming movies.
View 2 Replies
View Related
Apr 21, 2013
Region : Others
Model : TL-WR741ND
Hardware Version : Not Clear
Firmware Version :
ISP :
after year and a half of using TL-WR741 ND router, it suddenly stop working during the night. I have no problems with router before this happened (I think only one or two reset in 1 year and 6 months). System led light does not flash (some sytem error) and I can't access to 192.168.1.1 router setup site. I tried almost everything, unplug power, reset etc. for almost 100 times, reconnect the router with modem and PC in all posible ways, but still can't establish connection or even access to router's setup. Obviusly internet works fine?
View 3 Replies
View Related
Dec 14, 2011
I have a dir-655 xtreme N gigabit router with 2.03NA version firmware. The wireless signal will suddenly and randomly disappear from my laptop. I checked the properties of the network connected it remains on the same channel when it reconnects so I figure it's not a channel issue.I have reviewed this forum for hours and have made many changes to my settings, but nothing seems to keep the wireless signal from stopping.
Computer: dell inspiron 6400
OS: windows XP pro (sp3)
ISP service: DSL
Modem: stand alone (Sagemcom 4300)
Router: dlink / xtremeN gigabit router / dir655
Set for mixed g, n and b wireless mode
Security: wpa-personnal / TKIP
Firmware: version 2.03NA
View 14 Replies
View Related
Feb 22, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Charter 20Mb
I've had the router for 3+ months, and was very happy until about a week ago. Since then, it's started doing what many others here have reported: freezing where it's impossible even to access the web interface, requiring a reboot. When this happens, router's SYS and WLAN lights both freeze (either on or off, seems to be random wherever they are at the instant). The other lights continue to flicker. Freezes occur anywhere from half an hour to several hours apart.Network includes three ethernet wired devices (1 computer, 2 Ooma VOIP adapters), 1 TB NTFS hard drive via USB (music storage), 4 wi-fi devices (1 computer, 1 network streamer, 1 printer, 1 Roku streamer).Use the router extensively to stream music from the USB-connected hard drive, but the freezes also happen when not streaming.Have already done a factory reset of the router. Currently running plain vanilla installation except for enabling security settings and the USB drive, and it's still happening.
View 3 Replies
View Related
Aug 26, 2011
I'm having trouble getting my Ubuntu 10.04 machine (Sony Vaio VGN-SR490) to connect to the Internet by way of an Ethernet cable connected directly to my router.
I'm able to connect to the Internet using this same cable using a Windows machine, way Linux is configured. [code] It looks like the network adapters list is empty. I will now install both Windows XP and Ubuntu Linux dual-boot. I'm still not able to access the internet, even through Windows. I'm wonder if this could be a hardware problem with the computer or a problem with the router itself. Other computers can connect to this same router, and work fine.
View 4 Replies
View Related
Jan 10, 2012
I use a wired network connection to my neighbours Vodafone Modem (We share his monthly cost). I also have a TP-LINK 54M Wireless ADSL2+ Router from a previous broadband contract with a landline phone company. Is it possible to reset and configure the TP-LINK Router to act as a relay unit, connected to the network cable, so I can then use my laptop elsewhere in the house?
View 3 Replies
View Related
Apr 1, 2013
Region : Spain
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120524 Rel.05221
ISP :
linksys1.jpg
I have wifi at home this link installed.
192.168.1.1 is a TD-W8961ND
192.168.1.4 is a linksys wrtt54gl
And I have two problems.
1) I can not see any desktops in my local net, and with old router I could see all, for example (diskstation, dm800, etc...) In my macbook air I can not see my NAS Synology and with old router I do.
2) All PCs that are conected to 192.168.1.4 have not IP. and DHCP in TD-W8961ND is activated.
View 5 Replies
View Related
May 7, 2013
Region : India
Model : TD-W8151N
Hardware Version : V3
Firmware Version : 120530
ISP : BSNL
Net is working smoothly from LAN, but no success on wifi. Over wi-fi, I can connect to router but cannot access net.
View 2 Replies
View Related
Mar 15, 2013
Region : Argentina
Model : TD-W8968
Hardware Version : V1
Region : UnitedKingdom
Firmware Version : 101029
ISP : TalkTalk
I have version 1.1 and d/l'd firmware 111125. The upgrade ran successfully to 100% and then I got the login screen again. However after checking, then restarting to factory default the version displayed was still the old one
View 3 Replies
View Related
Feb 7, 2013
Model : TD-W8960N
Hardware Version : V1
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : TPG
URL Filter not working
Region : Australia
Model : TD-W8960N
Hardware Version : V1
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : TPG
Cannot get the URL filter to work Just upgraded to latest Firmware but that didn't work?
URL List Type: Deny Allow Disable
Address Port Remove
[URL]
View 1 Replies
View Related
