Region : UnitedStates
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 0.10 v0005.0 Build 120516 Rel.45877n
ISP : HiPointInc
Network Status.jpg
I've upgraded my line connection from 4mbps to 20mbps.I've also checked my status with HiPoint and on 192.168.1.1 which is shown on the attachment. No problems.
Max Downstream is 25612kbps but Current is only 4396kbps.Do I need to configure anything? Btw its directly connected to my PC?
Region : Malaysia Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0 0.4 v0005.0 Build 130217 Rel.62075n ISP : TM Streamyx I have internet speed : 8Mbps. The status of Internet in the modem config as foloows: UpstreamDownstream Current Rate (Kbps)636 10240 Max Rate (Kbps) 900 23412 SNR Margin (dB) 12.8 23.5 Line Attenuation (dB) 8.1 1.1 Errors (Pkts) 0 0
from the above informations the upstream is 636 Kbps but when I did the speed test it show me that the upload not more than 300 Kbps.
I used another modem D-link modem and the upload is more than 550 kbps when I used speed test.
Actually the upload is very slow by using TP-link modem and when I used another modem the upload is double speed.
Model : TD-W8968 Hardware Version : V1 Firmware Version : ISP :
I've connected a usb hard drive to my TD-W8968 and shared the root folder via storage sharing.When I try to copy files to the hard drive from my computer the transfer speed it about 700 Kbytes/s. When reading from the drive to the computer I get 2000 Kbytes/s.This is way below the 30000Kbytes/s that can be delivered to/from the drive when it's connected to the computer's usb. I've tried several usb drives and for all I get the same results.Is there a way to increase the read/write speeds for the usb connected devices?
Region : UnitedKingdom Model : TD-W8968 Hardware Version : V1 Firmware Version : 1.0 ISP :
I recently bought this modem for use at home. When I try to log in to my computer at work I am able to log in to the server via a VPN connection but not onto individual computers via Remote Desktop Connection. Both computers run windows 7.
Region : Australia Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n ISP : Bigpond
I am trying to setup port-forwarding (6360 for IP 192.168.1.111 & 6361 for IP 192.168.1.112) on this TD-W8968 modem. But when I test it on [URL]. I get a message "connection refused".
Region : Malaysia Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n ISP : TM
I am having difficulty setting up the W8968 to replace the router given by TM for the Unifi connection.I tried updating the firmware of the modem router and used quick setup to configure the device as a wireless router using PPPoE, but still couldn't connect to the internet using the WAN port.I noticed there was a guide for TD-W8960N to set up TM Unifi but the web interface is too different from the W8968 interface.
Region : UnitedKingdom Model : TD-W8968 Hardware Version : V1 Firmware Version : latest ISP : french orange
I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.
Region : India Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n ISP : BSNL
I Bought this w8968 a month back.. It was working alright till a few days back. When i connect and start browsing or downloading, it goes OK.. but after a few hours(sometimes 2, sometimes 1), It stops responding and I couldn`t ping 192.168.1.1 either through WiFi/Ethernet. Status indicators for DSL/WIFI/Internet/LAN all glowing as though nothing wrong with them..? The router is not that much hot when this happens.. When i switch off the router and then on, The Prob gets solved only to reappear again in 1/2/3 hrs..
Region : Spain Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n ISP : Telefonica-Spain
'm having the same problem my tp-link freezes several times a day and only a hard reset will get it working again. I have no idea how to fix it, I have contacted tp-link support and they say to make sure I have all the right ADSL configuration parameters.
Region : Australia Model : TD-W8968 Hardware Version : V1 Firmware Version :
Like many others with the W8968 Modem Router we are experiencing sudden disconnections from the internet every 1/2/3 hours with the only way to cure the problem is to hard reset the modem router. For your tech staff on the phone to say 'I'll just have to do this" is completely unacceptable.I have used 3 other modem routers with the exact same setup flawlessly with no disconnections so it's 110% the modem routers problem.I'm pushing this message for you, TP-Link, to release a new firmware version to fix this problem.
I also believe there are other problems incorporating port forwarding,etc aside from this major flaw.I used to believe TP-Link was a trusted and great company but after my experience I'll be thinking otherwise.
Region : UnitedKingdom Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0.1.1 V0005.0 bld 12016 rev 48690 ISP : Talktalk
yesterday (GMT) I received and installed my new TD-W8968 from Amazon and seemed to work a dream.. until today. The router connects to my desktop PC via a wired LAN connection but uses the wireless for laptop, TV, smartphone etc. Today I notice that when my PC wakes from sleep the LAN connection is lost. None of the LAN lights are on. And also there is no wi-fi connection either and even though WLAN light is on there is no signal at laptop. Setup is pretty much out of the box though I did reset channel to avoid conflicts locally. This is set to 7. The PC LAN adapter is enabled and ready but no apparent connection to router. I changed the router LAN port and that seemed to work but after I had the problem again this change did not work. I changed the LAN cable and that seemed to work until next sleep! Then fail again!
Is there anything on LAN adapter or router that needs changing? Am I on the latest firmware and would an upgrade fix this?
Region : Italy Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
I just got the new TD-W8968, I was interessed to use the mediashare for streaming movie to my ps3 system. I found out that is not possible to have working subtitle. using a normal vlc the avi file plays fine with the same name srt file.
Region : India Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n ISP : BSNL
I Bought thisTD-W8968 a month back.. It was working alright till a few days back. From the past 3days i'm experiencing internet light and DSL light going off...The DSL light is not constant even for 5min...When the DSL light comes up, the internet light takes almost 5min to comeup or before internet light come up the DSL light goes off.There wasn't problem with my old UT star modem..I already checked,its running fine without disconnection..When i replace it with TD-W8968 router ,the problem continues.. When my internet connection was good...The SNR margin was like 25 for upstream and 31 for downstream...After 2 days it went mad. here are the images shows about current reading..Fluctuates between 0.2 - 100 upstream and 2-35 for downstream
Region : Spain Model : TD-W8968 Hardware Version : V1 Firmware Version :
I have a TD-W8970. In settings "Bandwidth Manager" there is an option to put a value between 1 and 8, but does not specify which is better (1 or 8). What the value to give more priority to a computer to another?
Region : Others Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n ISP :
I've been using the W8968 for a while now with the default firmware out of the box. Everything was working fine, except that during a hard reset (power off-an-on) all my port forwarding settings were gone. This was so annoying that I decided to upgrade the firmware to 120926. Now the settings don't disappear, but the port forwarding stopped working. I've tried to connect from the outside to all of the ports that I opened on the router, but it kept on saying the port is closed (even though it appears on the port forwarding list and the status is "Enabled"). The router firewall is also disabled.
When can we have an upgrade to include 'Lookback' function for Virtual Server ? I understand both Build-120802 and Build-120926 does not support this Loopback feature. Without the loopback feature, we won't be able to test out Dynamic DNS URL is working or otherwise on local PC.
Region : Sweden Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0_1.1_up(120926) ISP : HessleholmNetwork
My TD-W8968 has begun to freeze up. It had been running for about two hours before this happened. It's a "slow" process that starts with the web interface being unavailable, i'm unable to connect to the modems web interface.And at about the same time it becomes impossible to connect new devices to the wireless network. Right about this point i did a speed test over the modem and performance was abysmal.It was so slow that my web browser believed that it was offline! But i was able to re run the internet speed test once more before it totaly locked up! At this point it was impossible to use the TD-W8968.
This was the,, i don't know,, perhaps the fifth time it happened in a row. It has been running perfect for two months before it began acting up like this.I have done a reset of the modem, didn't solve the problem.I have also done a reflash of the firmware, i've had the latest firmware since i bought the TD-W8968. But the reflash didn't solve it
Region : India Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n ISP : MTNL
After lot of troubleshooting and efforts I figured out there seems to be BUG with routers firmware 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n.When you enable Bandwidth control, FTP stops working from Internet. However, it does work from local network. When you disable Bandwidth control, FTP starts working from internet as well as local network.
Region : Italy Model : TD-W8968 Hardware Version : V1
I have a problem with my new td-w8968 router.The problem is that i can't use the reconnect function in the program jdownloader.The script is created with jd but it doesn't work!!!
Region : UnitedKingdom Model : TD-W8968 Hardware Version : V1 Firmware Version : TD-W8968_V1_130217
Having just updated the firmware I was surprised that it overwrote my configuration (WAN LAN & WiFi) settings.Is this normal for TP-Link firmware updates ?
Region : France Model : TD-W8968 Hardware Version : V1 Firmware Version : TD-W8968_V1_120926 ISP : SFR Device in question: siemans C610 IP voip phone Configuration:
* The C610 is directly connected to TD W8968 via the ethernet port number 3 >> ethernet port number 1 is connected to the devolo homeplug 200AVPLUS . The PC is at the other end of the homeplug network
* The DHCP address starts at 192.168.1.100 - 192.168.1.199.
Symptom:
1. It takes a long time (about 2-3 minutes) for the C610IP to obtain the IP address of 192.168.1.100 after the synchronisation of the ADSL line is finished 2. In the DHCP client list, I could only see the IP address of the PC (192.168.1.101) but not the C610 IP. However, if I type 192.168.1.100, I could access to the configuration page of the C610 IP. - I only managed to see the C610IP once in the DHCP client list.
I tried to unplug -> replug the router but to no avail.
Region : Italy Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n ISP : Alice (Telecom Italia)
I have just bought this new device, installed, DSL is working fine but not the USB printer sharing. Allways tells me: "This system was not supported yet." Here is the message box: usb_printer_error.JPG.I have a HP DeskJet 1050 and a Canon Pixma MP150 machine. I know, the HP is not in the supported printer list, indeed Canon is.
Region : UnitedKingdom Model : TD-W8968 Hardware Version : V1 ISP : TalkTalk
I'm getting to the last barrier to my Router USB printer working..The UPS is seeing my printer now but the last hurdle is the Printer Setup program. It is not comatible with Windows 8 apparently. The one I downloaded of the support site doesn't run either. Any news off one coming out for Win 8?
Region : India Model : TD-W8968 Hardware Version : Not Clear Firmware Version : ISP :
I am planning to buy TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router, which supports 3G dongle over its usb port.I already had Reliance Netconnect + Dongle (ZTE2736) .I want to use this Dongle with W8968.Is it possible to use this Dongle? What are the configuration steps for this dongle with W8968?
Region : UnitedKingdom Model : TD-W8968 Hardware Version : V1 Firmware Version : 120926 ISP :
Is it possible to turn off the web server facing the internet. When accessing my external ip address I am presented with the logon banner requesting user name and password together with the TP-Link name and model numbers. I would much prefer if I could switch this access and banner off.
Region : Poland Model : TD-W8968 Hardware Version : V1 Firmware Version : TD-W8968_V1_120926 ISP :
Recently I've switched to Windows 8 Pro 32bit (from Win XP) and since that moment I have problems with USB Printer Controller Utility. I was able to print test page successfully but printing larger documents (for example PDF file, about 15MB of data needs to be transferred to the printer) results in blue screen of death. Additionally if USB Printer Controller Utility is started "automatically wit Windows" switching user results in BSOD about 30 seconds after the second instance of Printer Controlled is loaded. Right now I've not found any way to use USB Printer connected to TD-W8968 while using W8. WhoCrashes states that the crash cause was Printer Controller Utility. It is very easy to reproduce the crash.
Both firmware and the utility was downloaded from [URL] According to this webpage TD-W8968_V1_USB Printer Controller Utility( For Windows) works in Windows 8.
