TP-Link Dual-Band Wireless :: WDR4300 - One Computer Losing Internet Frequently After Firmware Upgrade

Jan 23, 2013

Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225
ISP : Rogers

Ever since upgrading my firmware from 120426 to the latest(121225), one of my computer(windows xp, TP-link Nano) is frequently losing internet connectivity.I purchased the router a month ago and firmware 120426 was the version that came installed. The router would stop working about 3-4 times a week, requiring me to reboot it. Because of this I did some research online and found out about version 121225 which supposedly should improve performance and stability. After the firmware upgrade today I noticed that one of my computer is having a lot of trouble maintaining internet connectivity for more than 30 minutes. When checking wireless connectivity it would say that I am connected and that the signal strength is excellent. I'm also able to ping 8.8.8.8 but not www.google.com(I've tried ipconfig /flushdns and it doesn't solve the problem). I also have trouble accessing or pinging the router(192.168.0.1) with this computer.

View 3 Replies


ADVERTISEMENT

TP-Link Dual-Band Wireless :: TL-WDR4300 / Upgrade Router With Firmware?

Feb 21, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 1
ISP : cox.net

I have downloaded the file TL-wdr3600_v1_130129.zip. Extracted the file to a temp folder. Thje file is a bin file which is a bin image wdr3600v1_en_3_13_26_up(1301).bin. I do not see any flash file to load this to the router.

View 7 Replies View Related

TP-Link Dual-Band Wireless :: IPv6 For TL-WDR4300 (Firmware Upgrade) - How To Use It

Apr 20, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Comcast

just upgrade to the latest firmware and was checking to see if I had IPv6 going with the router but it seems like it's not enabled?I went into my local area network properties and it shows checked and obtain automatically.went into the router ipv6 support tab and it shows:

IPv6 Status
WAN
Connection Type:
DHCPv6
IPv6 Address:

[code].....

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - Firmware Upgrade Wipes Configuration

Feb 13, 2013

Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

After setting up the newly arrived router, renaming the SSID and changing password for 2.4 GHZ AND 5 GHZ and also renaming the default router username and password, I decided to update the firmware.The procedure wiped all configuration I've made forcing me to do all over again.

View 3 Replies View Related

Tp-link Dual-band Wireless :: Tl-wdr4300 / No More Wifi After Openwrt Firmware Upgrade?

Apr 29, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : OpenWRT
ISP : Comcast

I was having major stability issues with my TPLink WDR4300 and after a little bit of research, decided to upgrade the firmware to OpenWRT. I found a post online and followed these instructions:

1- Make sure your router is version 1.x (x can be any number).

2- Download the openwrt firmware from here: [URL]

3- Download putty command tool from here: [URL]

4- Login to your router config page (192.168.0.1) using internet explorer browser and update the firmware to openwrt. Use the firmware file you downloaded in step 2.

5- Now open Putty software you downloaded in step 3. Enter host name: 192.168.1.1, Connection Type choose: Telnet. Now click open. Now you will see the command line with black screen,

6- Now type "passwd" into the command line and press enter on the keyboard. Now choose your new password to access the router make sure password has letter and number. Repeat type password and press enter. Password should be changed now.

7- Type into the command "opkg update" and press enter on keyboard, Wait for it to do some download and updates. Once finished, type this "opkg install luci" and press enter

8- Type this into the command to enable luci "/etc/init.d/uhttpd enable" and press enter on keyboard.

9- Type this into the command "/etc/init.d/uhttpd start" and press enter on the keyboard. Now you can close Putty.

10- Open internet explorer in the address bar punch in: 192.168.1.1 and use the password you created to login to the router config page. Go to the wifi section and turn on the wifi and set up wireless security network.

Everything worked fine until I got to the last step and go to the "wifi section and turn on wifi." After a bit more digging, I noticed that there is not a "Wifi" option under the 19192.168.1.1 portal "Network" tab. After getting frustrated and more hours trying to figure it out, I elected to try and go back to stock firmware. On Luci, I selected restore to factory settings and the router did its thing and restarted. Now I can't login to Luci (obviously) since it was no longer enabled in Putty. I try and run Putty to connect to 192.168.1.1 and it just opens and immediately closes. It will not connect. I also can no longer login to (192.168.0.1). Further, when I try and run the TPLink setup disk,I receive the error "Please check the network connectivity" and "Please check the model of your router." The Wifi light on the router does not turn on (it is switched on). I'm stuck and don't know what to do! I use this router in a home office with multiple wifi users.

View 2 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - USB Controller Can't Work After Latest Firmware Upgrade

Apr 13, 2013

Region : Denmark
Model : TL-WDR4300
Hardware Versin : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP :

my TP-Link USB Controller after my latest firmware upgrade, and therefor my USB-printer (connected to the router) do not function any more, and i can not find a new software for the Controller

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - No Internet After New Firmware?

May 11, 2013

Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : TL-WDR4300_V1_130319
ISP : unfi

I unable connect to internet after upgrade the new firmware

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 Router WDR4300 Would Lock Up Internet (WAN) Connection

Apr 15, 2013

Region : Hongkong
Model : TL-WDR4300
Hardware Version : V1

During long, heavy download streams (such as BT, video streaming) the router WDR4300 would still lock up the internet (WAN) connection for that client. I could still go to the admin web page on that client but no internet activity would occur until either rebooting the router.

View 8 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 / Any Firmware For Unify Support

Jan 16, 2013

Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : Unifi

I just bought this hardware, I haven't tried it yet. Will tested it when I reach home today. Someone told me that I need to update the firmware. Do I really need this, or I can just simply use the existing firmware?

View 8 Replies View Related

Tp-link Dual-band Wireless :: Tl-wdr4300 / Dropped Wifi After Firmware Update

Nov 6, 2012

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : wdr4300v1_en_3_13_23
ISP : comcast cable

This router worked fine until I updated the firmware downloaded from the TP-Link site. I have V1 hardware which is what the firmware was created for. Since the update the wifi continually kicks outs quite often rendering this router useless.

View 5 Replies View Related

TP-Link Dual-Band Wireless :: Wdr4300 V1 When Update To Latest Firmware It Became Unstable / Disconnecting

Jan 14, 2013

Region : Iraq
Model : TL-WDR4300
Hardware Version : V1

have TL-WDR4300 router hardware v1 but when update to the latest firmware it became unstable and disconnecting so I had to return back to older firmware the new firm ware released 12/25/2012 and it is noted for TL-WDR4300(UN) V1 my model is TL-WDR4300 V1 not (UN) so what is different between the two

View 4 Replies View Related

TP-Link Dual-Band Wireless :: Wdr4300 - Can't Connect To Internet

Nov 7, 2012

Region : Denmark
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : Waoo, fiber

i just bought a WDR4300. tried the quick start, then tried to manually set it up like my old Router. but i cant connect to the internet. when i check the status. it often says that WAN is unplugged, no cable. But when i use same cabels and settings on my old router it works fin.

View 2 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - 2.4 Ghz Connected But Not Internet

Jan 6, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : time warner

This is frustrating I owned the router for about 2 weeks. my 2.4ghz is out. Basically I connect to the router on 2.4 can get into the tp-link admin webpage for the router but no internet at all. if I switch to 5 ghz everything works great, or if i use direct connect wire everything is great. I tried disabling NAT but that shut down all my internet connections across all links and manually switching to channel 1 did nothing at all i also tried channel 7. Ideas why only 2.4 ghz is affected out of the blue all of a sudden?

View 12 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR 3600 Firmware Upgrade?

Apr 14, 2013

Region : Canada
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP :

I'm wondering if I can install this version of the firmware: TL-WDR3600_V1_130320

It says: Notes: For TL-WDR3600(UN) V1 What is that (UN) version exactly ?

View 5 Replies View Related

TP-Link Dual-Band Wireless :: WR2543ND - How To Upgrade Firmware

Dec 28, 2011

Region : Bulgaria
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version :
ISP :

Region : Others
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.6 Build 110923 Rel.53137n
ISP :

I bought the TL-R2543ND. The hardware version is V1.2. I want to ask, is there firmware upgrading for this version . Here I see only version V1. [URL] Are they suitable for my router?

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - Unable To Connect To Internet

Mar 31, 2013

Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : TM UNIFI

I have recently bought a dual band router to replace the aging default router supply by the ISP.

After setting up, I found the message "No Internet Connection". I have checked the log and found that PPPoE was connected. However I am connect to the internet.

View 7 Replies View Related

TP-Link Dual-Band :: TL-WDR4300 Can Connect To Internet Wired But Not Wireless

Dec 5, 2012

Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

Just got my new TL-WDR4300 router. Set it up last night with the latest firmware. I can connect to Internet using a wired cable. However, I can't connect to Internet via wifi. I already tried 2 laptops (Vista & Win XP) and 2 tablets - I can see my wifi signal, connect to it (with my password), even obtained IP address (from ipconfig). However, when I tried to open a web page (eg google), it can't connect to Internet (always got timeout or service not found). Again, same laptop has no problem if I use a cable to connect to my router.

View 3 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 Unable To Enable Ftp Over Internet

Feb 15, 2013

Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : : 3.13.17 Build 120426 Rel.29216n
ISP : Sky

I am trying to setup my ftp site.My internet address appears as FTP Server Configuration

Server Status: Started
Internet Access: EnableDisable
Service Port: (The default is 21, do not change unless necessary.)
Internet Address: 192.168.0.3

How does my ftp site get active, it keeps the 192.168.0.3 address.I have enabled and saved hoping this will allow it, but no joy.

View 11 Replies View Related

TP-Link Dual-Band Wireless :: WDR4300 - How To Deny Access To Internet For Certain PCs

May 9, 2013

Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.31 Build 130319 Rel.57876n
ISP : BT Infinity

I have 11 wireless devices connected to WDR4300. These are PCs, phones, tablets, PS3 etc. All devices have assigned DHCP addresses.I have read lots of faqs and searched the web, but still can not figure out a simple way to achieve the following:

I would like some of my devices have NO access to the Internet from 2200 to 0600.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 Intermittent Lost Of Internet

Feb 9, 2013

Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : TL-WDR4300_V1_121226(Unifi)
ISP : Unifi

Recently my router have been experiencing an issue with internet connectivity with Unifi.I will be able to connect to Unifi, the status is "Connected". However after some time though, like 5 - 10 mins, I will be no longer able to browser any pages or get disconnected from online games. Checking through ping tests, I can see that I am unable to get a response. Checking the router shows that I am still connected to Unifi. After a minute or so the connectivity is restored, but the issue happens again as before. This happens with both wireless and cable. Attached is a sample of the ping test result.

Things I have tried:

Updating the firmware to the latest version
Re-configuring the modem
Re-setting the Unif credentials in the router
Downgrading the firmware

View 4 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 / Unable To Have Internet Connection

Jan 23, 2013

Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 121106
ISP : unifi

i just bought this router and upgraded the firmware. but i cant seem to get Internet connection up and running. it says connected but its not. tried both 121106 and 121226 firmware, still the same. when i checked the connection it says DNS server not responding.

View 7 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 2.4 Ghz Is Not Working

Dec 31, 2012

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : Comcast

I have no problems connecting on a 5 GHz band or wired to the router. However any device connecting on 2.4 Ghz gets barely any bandwidth and drops after running for a short time. I have test numerous devices and have the same issue. What was odd is a device on 5GHz that worked fine had the same issue when connecting on 2.4 GHz which seems to say it is only that band. I have an old router that works fine on 2.4 GHz on channel 1 with all the security settings I used on the 4300.

View 14 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 Get GMT Not Working

Jan 6, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : latest
ISP : Clear

Get GMT throws an error. I set known good public NTP servers, still get error. Also power cycling or rebooting the router seems to drop manual time settings, as well. I am using WDR4300 as a wireless access point, does that matter? Maybe I don't need time in access mode? It is connected to the Internet and is providing internet access to clients.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - 2.4 GHz Signal

Mar 28, 2013

Region : Venezuela
Model : TL-WDR4300
Hardware Version : Not Clear
Firmware Version :
ISP :

I have an issue with my TL-WDR4300 (regular, internet sharing use, no Open WRT or similar things). It was working well, until one day that my devices only receive the 2.4 GHz signal (no 5 GHz) and then I try to connect to 2.4 GHz and it asks for a password. I put my regular password and it doesn't work. Then I tried to bring it to factory default settings, I push the reset button for 8 seconds as the manual points and then same thing. What could I do?

View 2 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - How To Get Full 450Mbps

Jan 14, 2013

Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : plusnet

How do I get the full 450 Mbps out of my router on the status it saying 300Mbps

View 5 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 WDS Bridging Not Working

Nov 21, 2012

Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
Region : Others

I have Enable WDS Bridging and run Survey which detect the other SSID to be joined with the correct MAC address.I had filled the password of my second THOMSON v 585 V7 with the correct Auth Type both routers broadcast on channel 11.But my TP-Link 2543ND cannot made it work.I also disable DHCP and changed my LAN ip to 192.168.1.2 and can access it over my lan.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 / Can't Access Usb Storage

Mar 5, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

The router is working and when I plug in an external drive to usb I can see in the admin tool. It is setup to share without a password. I am using a PC with Vista on it...so I go to RUN and enter [URL] but I get the following message:'Windows cannot access [URL]

View 2 Replies View Related

TP-Link Dual-Band Wireless :: Interface Of TL-WDR4300 Is Slow

Feb 11, 2013

Region : Netherlands
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 121225
ISP : Online

Recently I replaced my Linksys WRT54G for a TP-Link WDR4300. But unfortunately this did not result in an increased speed.On both the 5GHz and 2.4GHz speed is limited to roughly 2.5-3 MByte/s, which is OK for watching movies etc. but I could reach those speeds with the 802.11g router as well!

I'm using the WDR4300 as access point, so I disabled DHCP server and NAT functionality, left the WAN port empty. And I set fixed IP in the subnet range of my modem/router. (horrible Speedtouch device). All works fine and stable, but too slow.

In the wireless settings I tried the 20 and 40MHz bandwith, disabled WMM, tried to lower the transmission power, tried to set a fixed channel. But all those changes do not have a significant influence on the transfer speed. (both on 2.4 and 5GHz) I'm the only 5GHz access point in my neighborhood, so interference cannot be a problem.
The clients indicate a link speed of 300mbps very close to the router, and this drops to indication of 54mbps further away, but effective link speed remains fairly constant (and stable!) (I find it strange that indicated link speed already drops at 3 meters with clear line of sight to the router)

I did the tests with fixed IPs on two laptops and no devices connected on the LAN ports, to rule out problems caused by the modem/router or other clients.The tests were done using a Lenovo x220 and Asus Zenbook, both with Intel dual band 802.11n wifi interfaces. The Lenovo reaches 22MByte/s via the Cisco access point at my work (with less signal as at home).

View 6 Replies View Related

TP-Link Dual-Band Wireless :: Use WDR4300 As Switch Rather Than Router?

Dec 6, 2012

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : Not Clear
Firmware Version :
ISP : Verizon DSL

My DSL connection comes into our house in the basement and the DSL modem came with a router included. I bought the WDR4300 for the higher speed wireless connections and the gigabit ports. I really don't need the "router" functionality. I would like to put the WDR4300 on the second floor to give (hopefully) the broadest wireless range. However, I would like all my PCs (including those wirelessly connected) to be on the same sub-net. Is there a way to configure the WDR4300 so it acts like a switch rather than a router?

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 Crashes After About 24 Hours

Dec 26, 2012

Region : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

I got a new TP-Link TL-WDR4300, connected it to my online pure sine wave UPS like I did with my previous routers with no problem.After about 24 hours, router crashes - no access to web interface, no internet (wired or wireless), must reboot to get it to work again.Router was replaced, same problem with new router.The firmware is the latest one and is customized for Israel because of 5GHz limitations.I was told by the representative in Israel that I should try to connect it to another AC outlet instead of the UPS.

View 7 Replies View Related

TP-Link Dual-Band Wireless :: Cable Modem And WDR4300 Don't Seem To Like Each Other

Feb 14, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : charter, its smarter.

so i have a sb6141 cable modem that is mine and not a lease. it works like a champ when hard wired to my desktop. i just got my hands on a new shiny tp-link wdr4300 yesterday and after messing with it for the better part of 2 hours, something seems to be amiss with the communication between the two. everything will be humming along fine and all of a sudden i get the dreaded PAGE CANNOT BE DISPLAYED. sure as the world i look at the modem and all the lights are off and its resetting itself. and honestly this continues until i pull the power and plug it back up. i think maybe one time in the middle of the night i actually saw it reset itself and then come back online.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: What IP For LAN When TL-WDR4300 Is Secondary Router

Feb 25, 2013

Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : fullrate.dk

My ISP has provided me a router: Zyxel P-2601HN which has an ideal WLAN transfer rate of 150 mbps. I live in a concrete 2 story house so signals are weak at best on the other floor - therefore, I Have bought the TL-WDR4300 as an extension for the latter floor. I have connected the routers from LAN to LAN and the Zyxel has 192.168.1.1 on LAN and the TL-WDR4300 had 192.168.0.1 as out set. I have changed this to 192.168.1.2 and all the setup (disabled DHCP + other) seems to work alright. BUT i can not log into the TL-WDR4300 !! Not with http://192.168.1.2 and not with [URL]. What I can do to get into the setup of TL-WDR4300. I know I can alays backup the setting and reset the router and load the setting again, make alterations, saving .....but it kind of drastic !Can the two radios SSID names (2,4 MHz and 5 MHz) be the same name as the SSID name on the Zyxel P-2601HN ? What are the implications ?

View 3 Replies View Related

TP-Link Dual-Band Wireless :: Slow Speed On WDR4300

Nov 6, 2012

Region : Denmark
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : Arrownet

I purchased a WDR4300 yesterday and have set it up. The internet is running smoothly although the transfer speed is rather slow. When transferring from my computer to my Seagate GoFlex Home i get about 6 - 8 mbps with Wireless N. The router is set to only use Wireless-N and my laptop has the latest drivers. I have also tried other computers in the house and the speed is the same. The GoFlex Home is connected to the router via a LAN cable. Prior to updating i used a Linksys WRT54GL and managed speeds of about 3 or 4 mbps over its G only connection. As for transfers between 2 computes the rate is about 1 - 3 mbps

As for distance the Wireless router is only about 1.5 meters from the laptop (across the room) with nothing in between them to cause interference. I have also checked what channels my neighbors use (using inSSIDer) and picked 13 as there is only 1 other person nearby on that channel and they are quite far away.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved