TP-Link Dual-Band Wireless :: WR2543ND / WDR4300 Not Setting Network Shares?

Feb 20, 2013

Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

I have a client that has a WR2543ND (House) and WDR4300 (Office/Internet) router that are located in two separate buildings about 40ft apart. He has each one hooked up to external antennas connected on the outside of the buildings. Back in December I got WDS working between the two routers and the PC in the house was able to use the Internet in the Office as well as share resources between the office and house computers. Two days ago I was down there working on his network and I was having problems setting up network shares. I discovered I wasn't able to ping from the Office PC to the House PC or vice versa and what's even stranger, I couldn't ping the House PC from the House Router (WR2543ND). I checked WDS status and on the House Router is says "Run" but on the Office Router it says "Int" but the WDS is definitely up because I am able to ping from the Office Router to the House Router, plus I am able to use TeamViewer to connect to the House computer from the Office computer. There are no firewalls enabled on Windows. Lastly the DHCP server is only running on the Office Router.

View 4 Replies


ADVERTISEMENT

TP-Link Dual-Band Wireless :: USB File Sharing WDR4300 / WR2543ND And WR1043ND?

Nov 1, 2012

Region : Others
Model : TL-WDR4300
Hardware Version : V1

I want to get cleared is the routers which have USB sharing option like WDR4300, WR2543ND and WR1043ND (I know it's the wrong section to mention this model but I also have this one in my list.). How much users can connect to the USB drive at a time?. I'm talking about 40 or more than 40 users here. Can these routers handle the load on the USB port?. Would there be any problem if nearly all of the users are connected to the USB drive at the same time?

View 2 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 Router WDR4300 Would Lock Up Internet (WAN) Connection

Apr 15, 2013

Region : Hongkong
Model : TL-WDR4300
Hardware Version : V1

During long, heavy download streams (such as BT, video streaming) the router WDR4300 would still lock up the internet (WAN) connection for that client. I could still go to the admin web page on that client but no internet activity would occur until either rebooting the router.

View 8 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - QoS Priority To Network Device

Jan 23, 2013

Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.17 Build 120426 Rel.29216n
ISP :

In the absence of true QoS capability on the 4300, what is the best way to give bandwidth priority to one of my network devices?

I have an Apple Airport Extreme connected to my network. It is used to stream music from my Ipod to my sound system. I do this through my network (rather then connecting the IPod directly to the AE) so that I can connect to radio stations over the internet. The problem is that I'm getting random dropouts (pauses in streaming). I've shut down everything on the IPod to make sure that there are no Apps competing for WIFI resources. The dropouts happen even if there is little activity on the network (e.g., file downloads, youtube, etc.)

What I want to do is to get the 4300 to give top priority to the AE. How can I do this without QoS capability? Can I allocate more bandwidth to the AE when it is receiving streaming data?

Note: The AE is always connected to the network. It uses DHCP to get it's IP address. It is connected to the 5G band. Signal strength is typically 1 to 2 of 3 bars (average is 1.5 bars). The 2.4G band has a slightly higher signal strength but the same dropouts occur so the problem does not appear to be signal strength.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WR2543ND / USB External HDD Not Recognized

Mar 30, 2013

Model : TL-WR2543ND
Hardware Version : V1
Firmware Version :

ISP : I have an external HDD that I regularly use in any computer I have access.It's an HDD enclosure 2.5" 3.0 USB, with a 750GB WD HDD inside. I use it in computers with all versions of USB, even in my TV. It doens't require an external power source, and just have 01 input/output, which is a USB port.After plugging it in the router (running with the last available firmware from TP-LINK - 3.13.27 Build 121207), I entered the setup screen of the router, and under USB Settings, pressed RESCAN, but the HDD wasn't recognized.What happens is that when I plug it in the router, the LED in it starts blinking (in normal usage, the LED becomes red for a couple of seconds, and then becomes steadly blue, when it gets connected into a equipment). It is probably a matter of power, as if the router wasn't providing enough power to it when it's plugged.Afterwards, I've made the following tests:

1) Used this External HDD in 3 different equipments (a notebook, a netbook and a TV), with different versions of USB ports. It was recognized and read normally in all of them.

2) I tested a pendrive with the router. After RESCAN, it was shown normally in Storage Sharing page.

3) I have downgraded the firmware to 120509 version, plugged the HDD in the router, and once again, it was an unsuccessful try.

What I can conclude from those tests is that:

1) My External HDD is working normally;

2) The router's USB port is working properly;

3) So, if both are working, it can only be a matter of compatibility between them.

View 2 Replies View Related

TP-Link Dual-Band Wireless :: WR2543ND Keeps Dropping Connection

Feb 6, 2013

Region : UnitedKingdom
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : v1
ISP : plusnet

I have a WR2543ND router and everyday it drops the wireless connection . all the lights on the router stay on and im still connected to the router but it looses the internet connection . the windows trouble shooter says that it cannot connect to the dns server , I have to reset the router and my computer to get it working again . I Have updated the firmware but still the same

View 10 Replies View Related

TP-Link Dual-Band Wireless :: WR2543ND - How To Upgrade Firmware

Dec 28, 2011

Region : Bulgaria
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version :
ISP :

Region : Others
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.6 Build 110923 Rel.53137n
ISP :

I bought the TL-R2543ND. The hardware version is V1.2. I want to ask, is there firmware upgrading for this version . Here I see only version V1. [URL] Are they suitable for my router?

View 1 Replies View Related

TP-Link Dual-Band Wireless :: Firmware Upgrading TL-WR2543ND

Jun 17, 2011

Region : Bulgaria
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version :
ISP :

Region : Others
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.6 Build 110923 Rel.53137n
ISP :

I bought the TL-R2543ND. The hardware version is V1.2. I want to ask, is there firmware upgrading for this version . Here I see only version V1.URL

View 3 Replies View Related

TP-Link Dual-Band Wireless :: TL-WR2543ND - Can't Connect More Than 20 Tablets To The Router

Jan 22, 2013

Region : Brazil
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.6 Build 110923 Rel. 53137n
ISP :

I'm trying to use TL-WR2543ND to connect 50 tablets to my wireless network, but as it establish around 20 connections, no other tablet is able to connect to it.

I've made no custom configuration to the wireless settings of the router. Is there anything a need to do to get the 50 connections?

View 1 Replies View Related

Tp-link Dual-band Wireless :: Unable To Connection To Tl-wr2543nd Wifi

Nov 9, 2012

Region : Canada
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.17 Build 120509 Rel.33890n
ISP : shaw

my lenovo 510 running windows 7 has the wirelss router listed in the wireless netowrk connection list but cannot connect to the router. it can connect to other routers without any problem.

View 4 Replies View Related

Tp-link Dual-band Wireless :: Tl-wr2543nd Wifi Access Limited

Dec 15, 2012

Region : Brazil
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : 3.13.17 Build 120509 Rel.33890n

I have a notebook connected by Wireless and a desktop connected by cable.Sometimes my wireless connection are limited, but my computer (connected by cable) still working fine.I`ve tried to disable DHCP and input static IP address but I didn't work.I have used for almost one week without problem, and sometimes this problems happens three times in one hour.The only way to reconnect the wireless is restart the TP-LINK and my internet modem.I`m using the latest firmware version.

View 1 Replies View Related

Tp-link Dual-band Wireless :: Wr2543nd Goes Down When Wifi On Xperia U Turned On

Feb 4, 2013

Region : Others
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : TL-WR2543ND_V1_121207
ISP :

I bought new smartphone - Sony Xperia U, it is with android 4.Until then I have not any problems.As soon as i activate wifi on phone - all wifi on router is down, i cannot even ping it over wifi.Ping via lan interface is ok.Tried different channels, different max speeds, but nothing works.Only everything works if i have switch router to be only B/G.

View 4 Replies View Related

TP-Link Dual-Band Wireless :: Wr2543ND / Very Slow Shared Storage Transfer Speeds?

Nov 16, 2012

wr2543ND / very slow shared storage transfer speeds?

View 4 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 No Free Field To Choose Protocol / Server / Password And Network

Feb 18, 2013

Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : V1
ISP : Kabel Deutschland

the firmware offers 3 different dyndns services. But opendns is not included, also there is no free field to choose protocol, server, password and network. Will this be updated in further firmwares?

View 3 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 / Creating A Wireless Network

Feb 9, 2013

Region : India
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

i need to create a network with four computers and i have a tplink gigabit switch(wired) and plan to buy a dual band wifi gigabit router the sending and receiving end are just about 10 meters and are parellel that is i have to transfer and share data across street i plan to use one of the computer as primary data server and one of computer wired in with it with cat 6 cable and two others across street with wifi the transmission has to be lossless as its accounting and varous other files are being shared?

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 2.4 Ghz Is Not Working

Dec 31, 2012

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : Comcast

I have no problems connecting on a 5 GHz band or wired to the router. However any device connecting on 2.4 Ghz gets barely any bandwidth and drops after running for a short time. I have test numerous devices and have the same issue. What was odd is a device on 5GHz that worked fine had the same issue when connecting on 2.4 GHz which seems to say it is only that band. I have an old router that works fine on 2.4 GHz on channel 1 with all the security settings I used on the 4300.

View 14 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 Get GMT Not Working

Jan 6, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : latest
ISP : Clear

Get GMT throws an error. I set known good public NTP servers, still get error. Also power cycling or rebooting the router seems to drop manual time settings, as well. I am using WDR4300 as a wireless access point, does that matter? Maybe I don't need time in access mode? It is connected to the Internet and is providing internet access to clients.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - 2.4 GHz Signal

Mar 28, 2013

Region : Venezuela
Model : TL-WDR4300
Hardware Version : Not Clear
Firmware Version :
ISP :

I have an issue with my TL-WDR4300 (regular, internet sharing use, no Open WRT or similar things). It was working well, until one day that my devices only receive the 2.4 GHz signal (no 5 GHz) and then I try to connect to 2.4 GHz and it asks for a password. I put my regular password and it doesn't work. Then I tried to bring it to factory default settings, I push the reset button for 8 seconds as the manual points and then same thing. What could I do?

View 2 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - How To Get Full 450Mbps

Jan 14, 2013

Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : plusnet

How do I get the full 450 Mbps out of my router on the status it saying 300Mbps

View 5 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 WDS Bridging Not Working

Nov 21, 2012

Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
Region : Others

I have Enable WDS Bridging and run Survey which detect the other SSID to be joined with the correct MAC address.I had filled the password of my second THOMSON v 585 V7 with the correct Auth Type both routers broadcast on channel 11.But my TP-Link 2543ND cannot made it work.I also disable DHCP and changed my LAN ip to 192.168.1.2 and can access it over my lan.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 / Can't Access Usb Storage

Mar 5, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

The router is working and when I plug in an external drive to usb I can see in the admin tool. It is setup to share without a password. I am using a PC with Vista on it...so I go to RUN and enter [URL] but I get the following message:'Windows cannot access [URL]

View 2 Replies View Related

TP-Link Dual-Band Wireless :: Interface Of TL-WDR4300 Is Slow

Feb 11, 2013

Region : Netherlands
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 121225
ISP : Online

Recently I replaced my Linksys WRT54G for a TP-Link WDR4300. But unfortunately this did not result in an increased speed.On both the 5GHz and 2.4GHz speed is limited to roughly 2.5-3 MByte/s, which is OK for watching movies etc. but I could reach those speeds with the 802.11g router as well!

I'm using the WDR4300 as access point, so I disabled DHCP server and NAT functionality, left the WAN port empty. And I set fixed IP in the subnet range of my modem/router. (horrible Speedtouch device). All works fine and stable, but too slow.

In the wireless settings I tried the 20 and 40MHz bandwith, disabled WMM, tried to lower the transmission power, tried to set a fixed channel. But all those changes do not have a significant influence on the transfer speed. (both on 2.4 and 5GHz) I'm the only 5GHz access point in my neighborhood, so interference cannot be a problem.
The clients indicate a link speed of 300mbps very close to the router, and this drops to indication of 54mbps further away, but effective link speed remains fairly constant (and stable!) (I find it strange that indicated link speed already drops at 3 meters with clear line of sight to the router)

I did the tests with fixed IPs on two laptops and no devices connected on the LAN ports, to rule out problems caused by the modem/router or other clients.The tests were done using a Lenovo x220 and Asus Zenbook, both with Intel dual band 802.11n wifi interfaces. The Lenovo reaches 22MByte/s via the Cisco access point at my work (with less signal as at home).

View 6 Replies View Related

TP-Link Dual-Band Wireless :: Use WDR4300 As Switch Rather Than Router?

Dec 6, 2012

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : Not Clear
Firmware Version :
ISP : Verizon DSL

My DSL connection comes into our house in the basement and the DSL modem came with a router included. I bought the WDR4300 for the higher speed wireless connections and the gigabit ports. I really don't need the "router" functionality. I would like to put the WDR4300 on the second floor to give (hopefully) the broadest wireless range. However, I would like all my PCs (including those wirelessly connected) to be on the same sub-net. Is there a way to configure the WDR4300 so it acts like a switch rather than a router?

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 Crashes After About 24 Hours

Dec 26, 2012

Region : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

I got a new TP-Link TL-WDR4300, connected it to my online pure sine wave UPS like I did with my previous routers with no problem.After about 24 hours, router crashes - no access to web interface, no internet (wired or wireless), must reboot to get it to work again.Router was replaced, same problem with new router.The firmware is the latest one and is customized for Israel because of 5GHz limitations.I was told by the representative in Israel that I should try to connect it to another AC outlet instead of the UPS.

View 7 Replies View Related

TP-Link Dual-Band Wireless :: Wdr4300 - Can't Connect To Internet

Nov 7, 2012

Region : Denmark
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : Waoo, fiber

i just bought a WDR4300. tried the quick start, then tried to manually set it up like my old Router. but i cant connect to the internet. when i check the status. it often says that WAN is unplugged, no cable. But when i use same cabels and settings on my old router it works fin.

View 2 Replies View Related

TP-Link Dual-Band Wireless :: Cable Modem And WDR4300 Don't Seem To Like Each Other

Feb 14, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : charter, its smarter.

so i have a sb6141 cable modem that is mine and not a lease. it works like a champ when hard wired to my desktop. i just got my hands on a new shiny tp-link wdr4300 yesterday and after messing with it for the better part of 2 hours, something seems to be amiss with the communication between the two. everything will be humming along fine and all of a sudden i get the dreaded PAGE CANNOT BE DISPLAYED. sure as the world i look at the modem and all the lights are off and its resetting itself. and honestly this continues until i pull the power and plug it back up. i think maybe one time in the middle of the night i actually saw it reset itself and then come back online.

View 1 Replies View Related

TP-Link Dual-Band Wireless :: What IP For LAN When TL-WDR4300 Is Secondary Router

Feb 25, 2013

Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP : fullrate.dk

My ISP has provided me a router: Zyxel P-2601HN which has an ideal WLAN transfer rate of 150 mbps. I live in a concrete 2 story house so signals are weak at best on the other floor - therefore, I Have bought the TL-WDR4300 as an extension for the latter floor. I have connected the routers from LAN to LAN and the Zyxel has 192.168.1.1 on LAN and the TL-WDR4300 had 192.168.0.1 as out set. I have changed this to 192.168.1.2 and all the setup (disabled DHCP + other) seems to work alright. BUT i can not log into the TL-WDR4300 !! Not with http://192.168.1.2 and not with [URL]. What I can do to get into the setup of TL-WDR4300. I know I can alays backup the setting and reset the router and load the setting again, make alterations, saving .....but it kind of drastic !Can the two radios SSID names (2,4 MHz and 5 MHz) be the same name as the SSID name on the Zyxel P-2601HN ? What are the implications ?

View 3 Replies View Related

TP-Link Dual-Band Wireless :: Slow Speed On WDR4300

Nov 6, 2012

Region : Denmark
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : Arrownet

I purchased a WDR4300 yesterday and have set it up. The internet is running smoothly although the transfer speed is rather slow. When transferring from my computer to my Seagate GoFlex Home i get about 6 - 8 mbps with Wireless N. The router is set to only use Wireless-N and my laptop has the latest drivers. I have also tried other computers in the house and the speed is the same. The GoFlex Home is connected to the router via a LAN cable. Prior to updating i used a Linksys WRT54GL and managed speeds of about 3 or 4 mbps over its G only connection. As for transfers between 2 computes the rate is about 1 - 3 mbps

As for distance the Wireless router is only about 1.5 meters from the laptop (across the room) with nothing in between them to cause interference. I have also checked what channels my neighbors use (using inSSIDer) and picked 13 as there is only 1 other person nearby on that channel and they are quite far away.

View 5 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - 2.4 Ghz Connected But Not Internet

Jan 6, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23
ISP : time warner

This is frustrating I owned the router for about 2 weeks. my 2.4ghz is out. Basically I connect to the router on 2.4 can get into the tp-link admin webpage for the router but no internet at all. if I switch to 5 ghz everything works great, or if i use direct connect wire everything is great. I tried disabling NAT but that shut down all my internet connections across all links and manually switching to channel 1 did nothing at all i also tried channel 7. Ideas why only 2.4 ghz is affected out of the blue all of a sudden?

View 12 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - No Internet After New Firmware?

May 11, 2013

Region : Malaysia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : TL-WDR4300_V1_130319
ISP : unfi

I unable connect to internet after upgrade the new firmware

View 1 Replies View Related

TP-Link Dual-Band Wireless :: WDR4300 Loses 2.4 Ghz Connection

Dec 10, 2012

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : Comcast

The 5 ghz connects fine for multiple machines however machines on 2.4 simultaneously lose their connection to the internet, sometimes saying it is still connected to the internet when it is not and sometimes losing connection with the router entirely. The 5ghz still works when this happens.

View 14 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 - 300MHz Not Working

Mar 10, 2013

Region : Australia
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :

I've been using inSSider on Windows and trying different settings on my 4300 to get wireless n @ 300MHz working with no luck. The maximum I seem to be able to get it to run is 144MHz.

Is this a fault with the router or the firmware? Since the router is advertised to run at 300Mhz, then by rights if it does not or cannot, then TP-Link owes everyone a refund, at least in Australia because this counts as false advertising.

I had a similar issue with my 1043ND as well. Has anyone got a 4300 working at 300 MHz?

View 3 Replies View Related

TP-Link Dual-Band Wireless :: WDR4300 Access Control For One Pc

Apr 10, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP :

Setting up access control for one PC. I just want to block all internet access to one PC during a certain time. It seems like my only options in the Access Control page in the GUI is to block websites or domains.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved