Is it normal to have packet losses of between 2 and 6% when using wireless. Laptop is running Vista Home premium. Internet is DSL light Router is Netgear WNR834B. Signal strength is good
View 1 RepliesI'm running Vista Home Premium X64 with latest updates. I'm also using a VPN for work. Hide My *** Pro v2.6.9.which worked just fine until this morning. My home internet connection is working normally though.My isp is Comcast. My Firewall is Comodo and I have tried using the VPN with and without the firewall running all to no avail.
View 4 Replies View RelatedI can only get local access when using wireless connection on 2pcs running vista home premium.Internet works fine using etheral cable and fine on windows 7 laptops.
View 1 Replies View RelatedNew, out of the box, 03 June 2011, Dell Desktop, W7 Home Premium SP1.
[code]....
I have tried Intel tools and latest drivers ( w/ and w/o pro wireless utility) but cannot pass thru code 10 error. Tried uninstall and install....as earlier card 4965 agn worked fine but seems like some conflict is stopping successful 5300 agn driver install.
View 20 Replies View RelatedSo I have an WRVS4400N V2 and just got a new laptop with an Intel 6230 Wifi card in it and have an odd problem.While the laptop is on battery power the network gets massive packet loss.
I don't know what to do.Laptop manufacture says its AP but AP worked fine with old laptop and works fine when laptop is on power and all other devices seem to be fine with the exception of my Xbox 360 that wont connect if I have it on WPA2 but I will post another thread for that.
I have recently been testing out the Kaillera netplay application thats embedded into a few old console emulators. Now the major problem is the de-sync between clients and I was wondering which is the best to reduce this.Say I have an upload speed of 1.2 Mbps and a download speed of 11.28 Mbps. Obviously, I am capped by my upload speed when it comes to changing how many packets i can send/receive per second because its all one setting and I am usually playing P2P.So, I am not entirely sure how big the packets are that are being sent, I am guesstimating based on what they said on Kaillera website that it is around 200-300 bits.Anyway, with my current upload speed I can transfer at a rate of like 600-800 packets per second depending on packet length.De-sync's happen quite often especially in the higher rom size games like Mario Party because of all the data being transferred. Would it be wiser to increase my setting of pps from 20 packets/sec to 60 packets/sec?
View 1 Replies View RelatedI'm trying to figure out what my network card is called and how I get drivers for it. Here is my computer model:
Dell
P10F001
Inspiron N5010
It is a laptop.
I have a home (wireless) router. All computers have had good internet access for awhile. Yesterday, one particular laptop (Sony Vaio Z2) started intermittently having a poor connection. I've pinged the router (192.168.1.1) and it shows high packet loss and long round-trip times. Another laptop sitting right next to it (the one I'm on now) does just fine (no packet loss, round trips 1 ms or less).
What procedure can I go through on the Vaio, to figure out why its not working? Just before the trouble, I had updated the various drivers, but I really don't look forward to rolling them all back..
I have an E1200 and am time out and packet loss issues. The internet connection is fine for 30 seconds to five minuets and then everything times out for 15-20 seconds. Although it’s only a minor incontinence to web browsing, it makes playing games and watching videos a nightmare. “Lost connection to server error.” and the like…
I upgraded to a new router, the e1200 I am currently using, from my Tenda 10/100 N. The problems where the same that I am experience currently and the reason I bought it in the firs place.When I directly connect to the cable modem, I have no issues and everything is fine.I have run a trace route and the second hop, (the router to the modem) is the choke point.I have cloned the MAC address.I have updated the firmware and hard reset
I have throttled my MTU to automatic, 1500, and 1472. None making any difference.I have disabled NAT and all that does is kill my internet connection.I have disabled all firewalls router and windows, no change.I replaced the physical wire from the router to the modem.I have disconnected all devices except one computer, and no difference.I ran a DNS trace and I have… non routable local internet address 192.168.1.1 DNS-cac-lb-01.rr.com and DNS-cac-lb-02.rr.com.I am using windows 7 and my ISP is time Warner so-cal.
My problem is that i have a packet loss of like 2% to 6%, which is a lot considering that i play a lot of Online games, causing lag spikes and net frozes.I will say all the information i can about my pc.My PC hardware hasn't been modified, so the manufactor page ( ) tells what is installed in my pc.About software, i need to find if this problem is software-based, my AV is Microsoft Security Essentials and i use MalwareBytes too.About how im connected, im connected via Wireless to a router. (dunno model, i just know its a encore router)
View 3 Replies View RelatedMy internet connection has suddenly turned really slow and pingtest.net tells me I have severe packet loss, which makes sense as nothing will stream or load properly. I'm running Mozilla Firefox (newest version) and have tried all the usual diagnostics and resetting everything?
View 1 Replies View RelatedHow can I connect a vista laptop to existing wireless home network with other 3 [COLOR=#000096 !important][COLOR=#000096 !important]xp[/COLOR][/COLOR] machines.I followed googled info but keep chasing my tail as all effords end trying to make an internet connection. [code] is Negear wired & wireless capable in which 2 PCs are wired & an Acer netbook wireless connected, all 3 XP machines.
View 1 Replies View RelatedWe have a new Toshiba laptop running Windows 7 PremiumWe have a sitecom modem router which is fairly new and already providing wireless to 2 other computers.I have connected to the router with the new laptop but for some reason it keeps dropping off the network, either saying "limited access" or "no internet access"t is well within range so I cannot understand why it keeps dropping off the connectio
View 11 Replies View RelatedSystem Info Utility version 1.0.0.1
HP s3240uk Pavilion Slimline
OS Version: Microsoft Windows 7 Professional , Service Pack 1, 64 bit
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+, AMD64 Family 15 Model
[Code].....
I have found many well meaning suggestions to resolve this annoying aspect of networking between Windows 7, Vista and XP but it seems like we are all banging our heads against a brick wall. I have tried every suggestion I can find on other forums but still my Windows 7 computer cannot access my XP Home or Vista machines. The message I see each time I try is as follows:- "\WINXP (or \VISTA) is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions. The account is not authorised to log in from this station." You will of course appreciate that the 'administrator' is myself. I can access files and a printer on Windows 7 from the other two computers providing I place shared files in the public folder ... no problem with this.
I have checked that all three computers have the same Workgroup Name. Yes, I have got Network Discovery turned on. Yes, I have turned on file and printer sharing. Yes, I have turned off Password protected sharing (and tried it turned on). Yes, I have set my network location to Work network. Yes, the computers I am trying to access do show in my network window ... each and everyone of them can be pinged from each other. I even have a little utility called Wireless Network Watcher that shows that the IP addresses, MAC addresses and each computer by name can be seen on the network.
I have followed instructions and installed R140135.., also R159805
I have not received any error messages. Fn+F2 did not work, so I tried to activate BTTray within both of the driver programs. Nothing has happened. My Bluetooth devices (via Control panel) is empty. Bluetooth settings displays nothing.
I am trying to transfer photos from my Nokia phone. The phone cannot find the laptop.If I slide the button next to the CD drawer I get visibility of Wireless, or accidently turn it off (!).Under Dell drivers I can see WIDCOMM, R14035 & R159805.If I type BTTray.exe, it takes me there but double clicking it does nothing. Ditto if I run R159805twon.
Local Access Only on Vista PC
I restored an old Vista laptop to out-of-the-box state to give to my Dad. This laptop had a wireless connection to the internet and network previously. After the restore, I can't get a connection to the internet, even though my router sees it and it has an ip address. It says Unidentified Network Local Access only, and it doesn't see any of the computers on the network. Sometimes the other computers see it but can't connect, sometimes, the other computers don't see it. I hate Vista.
Stats on Laptop:
Toshiba A215-S4747
Atheros AR5007EG
All my other eight devices have an internet connection no problem, but I powered off the modem and router a couple of times with no change. I tried updating the Atheros to the latest driver on Toshiba's website for this model, but it doesn't seem to take. If I uninstall the old drivers, Windows rudely just immediately reinstalls them again. If I just update the driver, and pick the new file, the driver version remains the same as the previous driver. I'm banging my head on the wall with the driver
Ping successful on:
192.168.1.11 (the laptop's IP address)
localhost
[Code]......
I am connecting to a Wireless network, through a ZyXel ZyAIR G-4100v2 router. My problem is that I am experiencing very regular packet loss every minute or so. This lasts for around 5-10 seconds on average. I am running XP with the latest service pack. So far, I have checked out;Wireless Zero Config scanning of new stations (disabled that feature).Xirrus network scan (signal is fine and consistent). I am not suffering from any degredation in signal, the problem seems to be that the router is simply not allowing anything through at regular intervals.
View 1 Replies View RelatedI am having internet connected to my Desktop with Win XP. Internet mode is Wireless Data Card that can be inserted into USB port. Now I have a laptop with Windows Vista Home Premium. I was able to connect both of them using ethernet cross over cable and successfully enabled file sharing through Local Area Network. But I want to access Internet from the laptop. Is it possible?
FYI, when I typed ipconfig in cmd prompt in desktop,
PPP adapter High Speed Data:
Connection-specific DNS Suffix . :
[Code].....
For awhile now i been having speeds of 1.0mbps when it should be 54mbps at all times.
View 1 Replies View RelatedI seem to be having packet loss with the E4200V2 which is upgraded to the latest firmware as of today, 1/18/12
The application is accessing a security DVR which uses a RTSP / RTP stream. Of course this requires certian ports to be forwarded in order for this to work. This works flawlessly with a WRT310N or a Cisco 871 Router so I know the port forwarding is correct.
With the E4200V2 it works intermittently, I can replace EV4200V2 with either the Cisco 871 or the WRT310N and there are no issues.
I am having issues where different laptops are dropping packets when communicating to the WAP on the RV220W. I have placed 3 laptops directly next to the router so there is no chance for walls to interfere. From each machine 1 at a time I perform a continuous ping. Here is a quick output from one of them:
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
[Code].....
A while ago I bought a WRT320N as a trade-in offer, unfortunately I had around 20% packet loss on my connection after I set it up. If running directly through my cable modem I had no connection issues at all.I was running the whole setup cabled, and have no peripherals using the wireless connection.The router was returned to the retailer for RMA, and in the end I got the purchase credited.My setup ISP: Dansk Kabel TV (danish provider for internet, TV etc.)Modem: Netgear CVD31T DOCSIS 3.0 compliant Cablemodem (I do not have access to the modem, as it is provided by the ISP. I have now bought an E2000, and set it up in the same manner as the previous router.This has returned the same problems I had with my previous router.Updating the firmware didn't make any difference.Using Pingtest.net as my test reference I get results like this.when connected directly to the modem I get 0% packet loss, max 20ms ping and jitter is 2-3ms.Have I been so unlucky to get 2 faulty routers in a row, or could there be some problems with Linksys routers and Netgear?I have unsuccessfully tried switching cables without any change, tried moving the router "far" away from the modem, monitors etc to see if there could be any interference from the wireless.
View 2 Replies View RelatedI have a WLC 2504 with 10 licences running 7.3.2.112.0. I have 7 AP joined from different remote sites (WAN). The other APs are 3602E.
I got a brand new 3602I that I want to join, from a remote site and I am getting these error messages and cannot join :
*Dec 21 14:35:18.859: %CAPWAP-5-DHCP_OPTION_43: Controller address x.x.x.x obtained through DHCP,
As far as I can tell, the AP seems to be loosing packets that are coming/going away from its own subnet.
AP address : 192.168.1.1 (mask 255.255.255.0)
WLC address : 192.168.2.1 (mask 255.255.255.0)
If I ping the AP address from a computer in the *same subnet*, I get a perfect 0% packet loss.
If I ping the AP address from a computer in ANY *other subnets*, I get about 50% packet loss.
If I ping anything else *other than this single AP*, to and from any other subnets, I get a perfect 0% packet loss.
Only packets orginating or sent to the AP from other subnets are getting lost.To me it looks like there is something wrong with the routing table of the AP, as if some packets were not properly returned ?
I have a RV220W with the latest firmware (1.0.2.4) and I loose about one in every 20-40 packets.
I have tried with both wireless/wired, on different ports, laptops, and Ethernet cables.
My configuration is fairly simple:
1.) I reconfigured the default subnet
2.) I setup a WAP on the same vlan (VLAN1)
3.) I setup a WAP on Vlan2 for guests
Other than that, settings are out of box (save a hostname/etc).
just purchased it, and am thinking I'll have to phone Cisco for RMA.... There is a similar thread where people noticed this on wireless (not sure if they tried wired as I have). RV220W Packet Loss over wireless
I want to use this adapter on a computer with Windows 7 Home Premium 64bit OS.Downloads lists versions V1.0 and V3.0 for this adapter. How can I determine the version I have?V1.0 list no driver for Win 7 64bit. V3.0 list a driver for Win 7 64bit.Research I found looks like the adapter is not computable with Win 7 64bit.
View 2 Replies View RelatedVista 64 Intel Pro 1000 with latest driver Here is a shot of the lagometer in COD Black Ops when all is good. I used to see this with my old WRT54GS and connected at 100Mbps Full Duplex or Half Duplex and I currently see this when connected through the E4200 at 100Mbps full or half duplex AND when connected via Gigabit via one of the 4 ports on the back of my cable modem, a Motorola SBG6580 [URL] This next screen capture is what happens when I try to connect via Gigabit thru the E4200. It either starts out like this right away or within 30 seconds to a minute this will start to occur. I believe the red spikes indicate packet loss. [URL]
View 8 Replies View RelatedI've been fighting with my E2500 since I got it back in June with lag, dropped connections, etc. It's a bit intermittent but can hang around for hours at a time when it kicks in. Restarts but the issue always comes back. Most noticeable while gaming online or on a VOIP program such as Team Speak. Generally when it happens If I'm monitoring my Team Speak connection the incoming packet loss shoots up between 20-30%, starting to drop out every other word or so. No out going packet loss. The connection drops are random between computers (I have one mac and one pc in the house) where one will be fine and the other wont, or when the whole system will stay connected and drop all transfer. In the case of this last one it's not my ISP's connection as any streaming happening between one computer and an Apple TV device will also cease. I've also swapped back to my old router (an older model linksys) and all problems have stopped. Fully rebooted and reconfigured the router about 3 or 4 times and am on the latest version of firmware (1.0.003). It was much worse on 1.0.002 but still very noticeable on 003. Also no difference with a different wireless adapter. I've tried the chat technical support but all they did was take 45 minutes to tell me how to reboot my router after telling them I already had.
View 1 Replies View RelatedCan your wireless router do a ping test to 66.161.11.90 [URL] or any other [URL] for that matter?Mine can't, either with my wireless PB G4 running OS X 10.4 or wired Dell running Windows XP. I tried it with a wrt54g v5 & wrt54g v6 both tests got a 'request timed out' with 100% packet loss. v5 had the latest firmware, v6 is still at 1.00.9
View 3 Replies View RelatedI upgraded my old Linksys wrt54g to the E1500. All the XP os are connected via cable and wireless connection, but the Vista laptop i get local access only connection error. This laptop used to connect on the older router using wep but with E1500 wpa-2 it cannot connect. I am unable to ping the router from the laptop wireless. Connecting ethernet cable it works fine and logging in as a guest works does too.
View 1 Replies View Relatedi am implementing tcp as per rfc 793, i have one doubt, while sending first packet, if that packet lost means, tcp will wait for RTO and retransmit the first packet, and after got the ack for first packet, then only it will send second packet or without getting the ack for the first packet it will send second packet.
View 7 Replies View RelatedMy ping is 35ms my DLS at 45.6 Mbps and my Upload is 4.51 Mbps. My Problem is that i am losing about 60 to 90 percent of the packets on a pingtest.net.
View 1 Replies View RelatedFor about the past 2 or 3 months, I have been experiencing outbound packet loss at about the same time every evening. That timeframe is about 7 PM - 10 PM. This is most noticeable on Teamspeak 3 because of the voice disruption that other users report to me.
View 1 Replies View Related