lose network connection on htc one v. At settings, mobile network says radio turned off. Could I have done something to cause this. I`ve had this phone for 4 months. This problem just started.
View 2 Repliesaccess network but cannot get online without turning on laptop
View 1 Replies View RelatedI have a question regarding setting up a wireless access point on a network. Lets say my router is going to connect to a switch. The switch puts out 192.168.4. addresses. I want the wireless router to do the same. So I turn off DHCP.Everything works fine and everyone can communicate. Here is my question. How do I ever connect back to the wireless router if I need to change the settings? If the wireless routers address is 192.168.1.1 I cannot get back to it since i am now on the 4. subnet. I have also tried changing the router's ip to an address on the subnet such as 192.168.4.100 but on two different routers this didnt work. One didnt me and said there was a conflict with the WAN IP. The other one would not let me get on the internet.
View 1 Replies View RelatedI have the WMP54G internal wireless adaptor. It normally works fine, but I have been having problems with it lately when I turn my computer back on from sleep. Even thought the wireless router works just fine, when the computer wakes up from sleep the adaptor does not seem to detect any network. I have to restart my computer, and then the adaptor detects the network.
View 1 Replies View RelatedI need to find a way to PERMANENTLY disable the network adapter from turning off to save power. Its this setting here. Uploaded with ImageShack.us Every time I restart the computer it rechecks that box. I manage an office with about 10 computers and this power saving feature is making the software they use very unstable.
View 2 Replies View RelatedRegion : UnitedKingdom
Model : TD-W8960N
Hardware Version : V1
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : talk talk
All working well except Net Radio on my Yamaha AV amp. When attempting to listen message receive 'access error' never had this with Linksys router. The amp has been setup with the internal lan gateway address and used dns from talk talk detail. IP has a static IP address . I have tried placing amp in dmz address which didn't work also tried port forwarding 8000 - 8001 which someone said was the port used for yam net radio. none of this works. Never had to do any of this before simply used local gateway address and local internal dns from the old router and always worked with tp - link just cannot get it to go.
Tried lots of variation gateway and dns addresses none which worked...
I want to turn my old Surf router into an access point but am having a few issues. I know how to do it and can get the LAN ports working fine but the wireless is confusing me.I was wondering how I set up wireless devices to connect to it. I know there is no DHCP and the access point IP is 192.168.2.200
View 12 Replies View RelatedI have recently added a wifi router to my home network. The connection is from my cable modem to a wired router to the wifi router. Everything on the network works great except when I turn on my cell phone's wifi connection. That disconnects my entire network from the internet and I have to unplug/replug my wired router to get reconnected. If I leave home with my phone and return, leaving the cell's wifi setting on, it reconnects to the network without disrupting the internet connection.
View 4 Replies View RelatedI've got a linksys router with two desktops running on it fulltime. One is hardwired (Win 7), the other is wireless (Vista). Normally, they have no problems with connecting. But I just got a laptop (Win 7) that is causing the whole network to go down for about 15-20 minutes then it will come back up for all my PCs but still drop out sporadically causing another 15-20 minute wait Both my desktops are unable to connect during this time. I also just got an old refurbished XP laptop from work, and it connects flawlessly. Then we had a friend come by and try to connect to our network and her laptop had the same problem.
View 3 Replies View RelatedI have been using DIR 615 at home for around one year. Now I notice that after some time of continuous usage (say around 3 4 hours) the Wireless network is lost. Thereafter only reboot brings it back. I checked for any latest firmware upgrade from admin page, but it says device already has the latest.
View 7 Replies View Relatedour autonomous 1252APs. It loses network connectivity irregularly and ends up disconnecting everyone. It may stay up from a few days to a few weeks. I don't see any log messages that give any clues to why it is doing this. We have 30 of these working worldwide (on the same software level and same config) and this is the only one having the problem.
Things I have tried: Changing software levels - there is a code level where it didn't seem to have this issue, but I can't run it because then I'm unable to monitor it in our monitoring system. Swapping out wireless access pointsRe-terminating the cable on the AP side, it was really difficult to get the network cable into the AP while swapping it outBlocking a company test piece of equipment from connecting using the mac address filtering (it connects with one of their test IPs - weird) – I still see it connecting though I don't see high utilization on the switch port when the issue happens I had a few cases open with TAC, and they were unable to find anything wrong - gave them sh techs of prior to the event and after the event. It was one of those where the tickets were open for a weeks with no updates.
I was using a netgear wndr 3400 and my network stream never failed. i bought a e4200 v2 and my tv loses streaming capabilities after about 10 to 15 minutes.i have to turn it off to get them back and then it does it again in 15 minutes. i know it is not the tv it wprked fine before the new router.
View 5 Replies View RelatedThe issue is Windows7 (notebook ASUS N61Ja connected through Wi-Fi) loses and can not find again network HDD storage (Western Digital My Book Live 3TB). Rebooting of the notebook works but after I close HDD folder window the issue comes back. The issue exists only with Wi-Fi connection. Everything is fine using LAN connection.
View 1 Replies View RelatedCurrently using a netgear WG602 wireless router which i use to connect to my 2nd PC and Iphone, with the Netgear router running from my main PC.I have recently been having trouble with my 2nd PC ad Iphone randomly losing connection and the only way for the connection to be reastablished is to reboot the wireless router. Once rebooted i am able to connect again to the internet with no problems, interestingly enough my main PC never loses connection. Also sometimes when i lose my connection and reboot the wireless router i will have a IP conflict pop up on my 2nd PC however i would i say i get this once in every 10 dissconects and not all the time. Sometimes i won't dissconect at all in a day but sometimes i may dissconect 5-6 times.
View 1 Replies View RelatedTrying to create a network for file sharing, as have upgraded the 'server' (part of a Workgroup, not a Domain) from WinXP to Win7 and experienced problems ever since. Ironically the problems haven't mainly been with sharing files between Win7 and WinXP systems, but between 2 Win7 systems. I bought a new Win7 laptop and tried to connect it to the server, but it hasn't had Read/Write privileges over the files in the Win7 server. Entering a username and password to gain access to the servers folders has not been a problem, and as far as I know, opening files such as documents has not been a problem either. However, when trying to save an edited document, access is denied, and if I try to open an executable file (this is necessary for a node installation), it prompts me for a network password. Every combination possible of username and password from the 2 systems (including '' or 'SYSTEMNAME' before the username) has not worked. I tried syncing the times which was apparently a previous problem, but to no avail. I am unable to access Local Security Policy, as the server is running off Home Premium. I have tried creating a new workgroup, removing and changing passwords, enabling guest access to the network through the Windows Resource Kit Command Shell, creating identical users on both computers, but nothing appears to have worked.
View 1 Replies View RelatedMy wireless adapter keeps turning off randomly on my HP G60 120EM.
It will have my connection strength icon on the icon tray and then just randomly display an adapter with a red cross through it.I have made sure that the adapter is not set to turn off on power save but still the problem persists.I thought it could be the adapter being loose inside the laptop but if i give the laptop a small shake it doesn't disconnect and I opened up the laptop and everything seems fine.This is where it gets a bit strange. If I close the laptop lid then open it again, the wireless is fine, but will drop off again about a minute later.
Im having a problem with my laptops wireless capability; it worked fine, until i tried a hardwried connection (i went over to this center and tried one and it didn't work, so i unplugged it).
Now, I can't connect to any wireless networks unless i do the windows network troubleshooter, which it tells me my laptops wireless capability is turned off; I then have to click on the option to turn wireless capability back on..
I have tried playing in change adapter settings in Network Connections, but nothing is working.. I have tried disabling the LAC and wireless adapter but nothing is working..
I also notice under Local Area Connection that is says "Network cable unplugged". Also in one of the tables of the windows network troubleshooter it shows Network cable unplugged and wireless capability is turned off.. Is my laptop trying to find the hardwire connection all the time so it turns off wireless?
My daughter is going to Uni and has wired ethernet access in her room but no wireless. She would like wireless so a) doesn't have to bother with cables and b) can use the WiFi for her phone.Would it be simple enough to plug a wireless router into this ethernet connection and set up her own SSID/Passwords?
View 2 Replies View RelatedMy girlfriend's computer has quite suddenly developed the problem that the wireless card simply will not turn on.She has an Asus Notebook G60 Vx Series, which has a switch on the front as well as Fn+F2 for turning wireless on/off. Yesterday, she noticed it wasn't working even though the switch was "on", but was able to use Fn+F2 to enable it. Today, neither will work. It simply won't turn on.Ethernet works fine when connected directly to the router. Device manager detects "Intel(R) WiFi Link 5100 AGN" as working correctly and drivers as up-to-date.I feel like this must be a software/driver problem, but everything seems to be checking out. [code]
View 8 Replies View RelatedMy router got turned off for aroud 2 hours, now my speeds have dropped by around 40-50% according to speed test.
View 1 Replies View RelatedI've been looking around like a madman now in the settings. where can I turn off my WPS ? Just cracked my own PIN within 6 hours with Reaver.
View 9 Replies View RelatedI have a problem with my home network (diagram attached below). I sporadically lose connection between my Router and the devices behind the switch. I have replaced the Ethernet cable between the 2 so I don't think the problem's there. It will work for a week or so, then just lose the connection. I then try a combination of rebooting all of the devices on the network and/or unplugging and re-plugging the cable connections and sometimes that works. It's a relatively new router, but can a router be "underpowered" for pushing a signa
View 2 Replies View Relatedmy laptop always automatically disconnects from my wireless when I switch to battery and unplug from the power cable. I then have to restart because my laptop doesn't find any wireless adapter installed.
View 2 Replies View Relatedwe took one of our controllers and turned LAG on and since then it is unreachable on the WCS. The controller is running version 7.0.116.0 and the WCS is running 7.0.172.0. I can access teh WLC no problem through web interface and CLI, as I can also do this with the WCS as well, but the WCS cannot access the WLC.From CLI i can ping the WCS from the Controller and get a response, but from CLI on the WCS, I cannot ping the controller.
View 5 Replies View RelatedI have broadband internet coming into 1 room of my home. The internet goes through a router I have set up, its a Linksys WRT54G2 (router #1), Firmware version 1.0.04. Everything on this works fine, I'm able to get my TV and laptop in a different room to access the router wirelessly without any inconvenience.In another room I have a regular desktop computer which I would like to get internet on. As well as other devices, so I purchased another router, this time a Linksys E4200 (router #2) in hopes of turning it into an access point.Now I've set up LAN's in the past, using the actual cable plugged into the second router, problem is in this scenario I can't run a cable over to router #2. Both computers use Windows 7. Both router's drivers and firmware have been updated on the Linksys page, all my Windows drivers are updated, etc. I checked other forums for similar questions and although there are some, they date back to 2009 as well as Google which has some websites dating back to 2006! While useful, I wasn't able to find something that details how to solve my problem with my specific setup. I've already gone into router #2 and changed the router's IP to 192.168.1.2 and also turned DHCP off, problem is, once I take that router off into the other room, it doesnt connect to primary network or allow devices to even "see" router #2.
View 2 Replies View RelatedMy D-Link 802.11g/2.4GHz Wireless Broadband Router is not turning on. None of the lights turn on. I have checked all the cords, and they are all properly plugged it. My laptop can not wireless connect.Model # of D-Link Router: DI-524
View 1 Replies View RelatedI have WRT 120 N which has apparently stopped working. When I turn it on, only the power led turns on without blinking, no other light flashes. My computer can't detect the router signals since the signal light is off. Neither does my modem show that the router is connected to it through the ethernet cable. My ethernet cable is working fine, since it is working directly with the computer.
View 6 Replies View RelatedI want to save energy. How can I turn off the Linksys N300 range extender at night. Can just unplug or will this screw things up.Is there a button
View 1 Replies View Relatedwe got a At&T Modem/Router upstairs, and then we got a long ethernet cable running from there to the basement. The problem is that this only allows for one LAN connection at a time (an issue for LAN parties and such). I do have an E2000 Linksys router however and I want to be able to use that as like a switch/access point.I am pretty sure this is possible but I have forgotten all of the steps to do it.The att modem/router is running on 192.168.1.254, and my Linksys which is now directly connected is on 192.168.1.1, so I have a different address in that regards.Do I need to edit my Linksys settings now, or do I have to edit the at&t settings?Also I will be using this for Xbox Live at points so will I need to re-open all those ports up on my Linksys, or at least set the DHCP to the Xbox's static IP to keep my NAT good?
View 2 Replies View RelatedWe are having 5508 controller with Lightweight access points 1142, IS it possible to disable 802.11a on certain access points before turning it off completely on the controllers?? Could you provide steps for doing so on WCS?
View 5 Replies View RelatedAny problems with the guest network on the ea4500 with the cloud firmware? I am losing guest clients after about 24 hours and the re-authentication fails. you enter the guest password and nothing happens until you reboot the router.
View 2 Replies View RelatedMy desktop is connected to the internet via cable modem, then to my laptop via network bridge between the LAN and wireless NIC, then through to the laptop via wireless ad hoc network.
The problem I'm having is that my laptop loses connectivity every 5 minutes, though it doesn't show a dropped connection. The desktop does not show any connections to the current network at anytime, however I still get connectivity on the laptop albeit only 5 minutes at a time.
I have, on both systems, disabled power saving for the wireless and wired connections; and also that they have the most current drivers.
It does not have to be idle to lose the connection either, I can be in the middle of something when it drops.
it shows that it is Online getting an Excellent Connection thru my Home Network... I go Online using Firefox with it at home.. stays up for a few minutes .. can get onto the internet...then loses the ability to stay connected.... it still states it's Connected though ... kind of baffling... like something is timing out then blocking it...I tried shutting down my AVG Anti-Virus.. also shut down Windows Firewall... it still continues to lose the Connection while stating it's connected getting a good signal... both of these are configured correctly as far as I can seeI've re-installed my Wireless driver thru the Acer Recovery Management included on the Netbook.. still no good..
View 2 Replies View Related