Linksys Wireless Router :: Wrt54g - Use Dhcp For Wifi / Assign Private Ip For Pc (wired Connection)

Dec 20, 2011

Could I use DHCP for wireless connection and assign private IP for PC for wire connection ?Will it conflict to each other ?

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: Wrt54g No Internet Either Wired Or Wifi

May 26, 2012

DSL modem works fine when connected directly to computer. No internet output from WRT54G wired or wireless, but wireless network is recognized by computer, just no internet.  I did a reset and installed the latest firmware, then I ran thru the setup CD that came withe the router, and the internet test said no internet connection was available.  Cables are fine, connector innards look clean. 

View 4 Replies View Related

Linksys Wired Router :: WRT54G Maximum Value For DHCP Client Lease Time?

Jun 26, 2011

On the BEFSR41 v1 series and WRT54G series, what is the maximum value for the DHCP "Client Lease Time (in minutes)?"  It seems that 2^16 -1 (65535) minutes is the max.  This is about 45 days.  has the max value changed with newer versions  of these devices?

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Wired Connection Stopped Working?

Jun 24, 2012

I have the WRT54G router for years and use it to provide both a wireless network for our home computers and a wired network for by internet phone that connects me to my office phone system and for my work computer and printer. Last week, the wired network stopped working. I checked the wiring and plugged my wire into all four of the ports in the back of the router with no success.  I followed the troubleshooting procedure that I found and changed the MTU setting.  I tried to update the firmware but the screen seemed to lock up and I was unable to complete the task.

View 9 Replies View Related

Linksys Wireless Router :: Wifi Connection Through Wrt54g

Nov 22, 2011

I am trying to connect a myTouchQ (t-mobile) through my WRT54G.  The android shows that I'm connected and have a good signal, but I can't access the internet or any data.  When I turn off the wi-fi connection, I can access through the 4G network. My provider is Cox Cable.  I've unplugged the modem and the router for 30 seconds and even reset the security.

View 5 Replies View Related

Linksys Wireless Router :: Lost Wifi Connection Often With Wrt54g

Jul 20, 2011

My router's wireless connection goes down intermittently,about once a day.  I can access the network with a machine that has a hardwired connection to the router only.  To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
 
LinkSys WRT54G V3.1 router with firmware update V4.21.1

View 2 Replies View Related

Linksys Wireless Router :: Wrt54g Lost Wifi Connection

Apr 29, 2012

My WRT54G lost the WiFi connection. I can get the internet if I connect the cable from my modem to my computer but my wireless connection is gone. So it's an issue with the router or settings. I called Linksys and was told the settings would have to be reset/updated. I was told there would e a fee. I did not want to pay a fee. I'd like to try to resolve myself.
 
I have a Mac laptop. Verizon ISP. 

View 2 Replies View Related

Linksys Wireless Router :: Wrt54g - Need To Reset / Configure For Continuous Wifi Connection?

Dec 21, 2012

Every night I turn everything off via power strip, including the router. Before I turn off the router, my roku connection is good.In the morning, the roku will work for about 20 minutes, then disconnects, and then I'm unable to find the router.I'll then need to reset my router's settings (I have the WRT54GS), and then uplug, and replug the router.It's important that I unplug the router every night.Is there a way to configure the settings so I don't have to reconfigure the settings every morning?

View 4 Replies View Related

Linksys Wireless Router :: Wrt54g - Regular Wifi Connection Failure After Updating To 4.21.5?

Aug 26, 2012

I recently updated my WRT54G V3 to frimware 4.21.5 and now get regular wireless connection issues.  The wired connection never has any problem (can connect to the router and the internet), but none of the wireless devices can see either.
 
The problem happens every couple of days, and cycling the power seems to be the only fix. When the problem does occur, the wireless devices don't even see the broadcasted SSID.  But cycling the WRT54G's power fixes that.
 
I've gotten a few suggestions to do a "30-30-30" reset, but can't find exactly what that entails.

View 5 Replies View Related

Linksys Wireless Router :: Wrt120 Wifi Connection Fine - Wired Is Not

Sep 11, 2012

I have a WRT120 wireless router that works fine, but the wired connection has failed. I have restarted the modem, router and the computer and still doesn't recognize the wired connection.

View 9 Replies View Related

Linksys Wired Router :: Can't Set RV016 To Assign A Default Gateway IP Of Server

Jun 22, 2011

I am using a RV016 (192.168.1.2) as a router and DHCP. It automatically assigns its own IP which is 192.168.1.2. I can not set my RV016 to assign a Default Gateway IP of the server. The workstations will connect to internet via this server (192.168.1.1)

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Replace XP Machine With Wired Desktop Running Windows 7

Apr 28, 2010

I have a Linksys WRT54G router; have a cable internet connection through the router; and two wired desktops, one running Vista (32-bit) and the other XP. I would like to replace the XP machine with a wired desktop running Windows 7 (64-bit).

View 8 Replies View Related

Linksys Wireless Router :: WRT54GL - DHCP Active IP Table Don't Show Wired One?

Oct 14, 2012

On my old Linksys WRT54GL router (with its latest stock firmware)'s http://192.168.1.1/DHCPTable.asp for DHCP Active IP Table, it only shows wireless connections. How come it doesn't show wired ones?

View 5 Replies View Related

Linksys Wireless Router :: Wrt54g V2.2 As Wifi Repeater?

Nov 30, 2011

is it any possibility to set my router WRT54G V2.2 as a wireless repeater? and does any manual for this exist? 

View 3 Replies View Related

Linksys Wireless Router :: Win 7 Wifi Causes Wrt54g To Slow Down 20x

Apr 5, 2013

My wrt54g (firmware old - v1.00.6) has run fine for years until my daughter got a laptop with win7. All my other systems still run XP or win2k. I only run wireless with her win7 and one netbook with xp, all the other connections are wired.
 
Going to speedtest.net and after I reset (pull power) the router, I get 20Mbps download. After the win7 wifi runs for a bit, download speed drops to 2 Mbps or less. It seems to be after she goes to you tube and starts watching videos. If I reset again, it immediately goes back to the full speed of 20. I measure this after she's taken her laptop off the network. So, whatever her win7 is doing, it stays that way after she disconnects (i.e. slow on my other systems) until the reset. I also measured the speed on her win7 system and it also would slow there as well and speed up after a reset (for a while).

View 3 Replies View Related

Linksys Wireless Router :: Wrt54g - Setting Up Wifi Network?

Apr 27, 2013

I have the following equipment
E2500 wireless N router (2 of these)
WRT54g router (B/G)
WAP54g access point (B/G)
 
I am planning to set up a wi-fi network for a single story motel. It is C-shaped; about 300 feet along the longest side with "legs" of 120 and 70 feet. I have included a diagram that I drew for the person that will install it. Until now I have only used that single WRT54g in the office for the entire property and it covers about half the property (left side) but not well and with a dead spot in the top left because of too many walls to go through.
 
My plan starts in the office (bottom left) with a WRT54g connected to the DSL modem as it always was. That would be connected to one of the E2500s in the middle so it can cover the most area. From there two others would shoot out to each corner (the other E2500 and the WAP54g). They will all be wired together with Cat 5e "riser cable". The routers will be placed in a wide open attic.

1. Is this is a good plan for the size of property? I have heard that N routers have a range of 150ft in every direction so that's why I'm putting one in the middle. Keep in mind that while the attic is open and wood constructed, the walls between rooms are concrete firewall and they haven't been wi-fi friendly. Hopefully putting them in the attic takes care of this.

2. Does starting with a B/G router at the modem mean the N routers will revert to B/G?

3. What are the main settings I need to know about? What "mode" does each need to be set to?  Do they need different default gateways?

Can I use the same password/security for all of them? Should I use the same SSID for all?

View 4 Replies View Related

Linksys Wireless Router :: Wrt54g V3 - Wifi Still Isn't Broadcasting For Devices

Aug 6, 2012

I've done a firmware upgrade to latest version v4.21.5 yet my Wifi still isn't broadcasting for my devices to find and connect as of last night (Aug 5, 2012).  This hasn't happened before, so I was hoping it would return but still hasn't started working yet.My iphone just says "unable to connect."

View 4 Replies View Related

Linksys Wireless Router :: Iphone 5 Wifi Connectivity With Wrt54g

Dec 1, 2012

I am having problems with connectivity and my iPhone 5. The Wi-Fi is okay in some parts of my home network, however in others it is abysmmal. When I bring my computer to the places where the iPhone has problems with signal strength/staying connected the computers have full or almost full strength and no problems. I upgraded firmware for the router, spoke with applecare, have reset the router multiple times, and have been trying different channels. I had the phone in with the Apple store where they concluded nothing seems wrong with the hardware. The phone doesn't seem to have problems like this on other wifi networks I have tried. Using a speed test on the iPhone at home in the low connectivity areas results in horrendously poor latency numbers.

View 2 Replies View Related

Linksys Wired Router :: RVL200 / RVS4000 Possible To Assign Public IP Address As Local IP Address?

Feb 28, 2011

Is it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?

View 1 Replies View Related

Linksys Wireless Router :: Ea4500 Wifi Signal Weaker Than Old Wrt54g

Aug 27, 2012

I recently bought the top end ea4500 hoping its "high end" claims would get a better wifi signal in my bedroom(on my iphone 4s) than what i was getting with my WRT54G.The end result is it constantly drops signal completely or shows my network but when I try to connect says "cannot connect to wireless network" even though it's staring me right in the face.  When I hook my WRT54G up, I get a signal.. all be it weak, but at least it doesn't drop out on me.Did I just waste almost $200 on a high end router that can't push a signal out stronger than my almost 7 year old WRT54G? or am i missing some setting that will make this EA4500 worth its claims? settings info:everything is pretty much on "default" aside from the SSIDs for the different bands and the corresponding WPA passwords.
 
also another problem, it seems like the router itself craps out every 60-120 minutes, no leds lit up on the router and my modem (Cisco DCP3010) shows no "link". Yet when hooked directly to the PC there is a "link", so pretty sure its the router and not the modem.

View 9 Replies View Related

Linksys Wireless Router :: Wrt54g - Internet Speeds Slowing Down When Wifi Enabled

Jun 27, 2011

I have both the WRT54G and a E1000 wireless routers and this problem is occurring for both of them.I use AT&T DSL and the speeds are fine when it is :

1. Not plugged into router

2. Wireless Network Mode is disabled through the router configuration page, having all devices wired.
 
However when wireless network mode is enabled, speeds drop significantly, 15~17 ms ping goes to 250~800 ping, and download speeds are way lower also. When the router is reset, the regular speeds will return for maybe 30 seconds to 1 minute, then it'll drop back down. I'm positive there's no outsiders connected to my network and this problem still occurs, only when the router is giving out wireless signals. Sometimes the problem randomly goes away for a while but it will always come back. I've tried many things, firmware upgrades, factory restore, none of them seem to work, the only solution so far has been to disabling it, but I need it to be on as there are other devices in other rooms of the house that need WiFi to connect to the internet.

View 9 Replies View Related

Linksys Wireless Router :: How To Use E3000 Dhcp Through Wifi

Aug 22, 2011

I've been searching how to make my E3000 use the DHCP and IP address on my primary router so I can share printers and computers on same gateway IP. I tried turning off DHCP on E3000, but not sure how to tell it to use the DHCP from the source "INTERNET"

View 1 Replies View Related

Linksys Wireless Router :: Wrt54g V6 - Way To Get Connection?

Jan 12, 2012

I'm trying to set up my sons  I pod touch to my router i have the wrt54g v6 and it won't connect?

View 7 Replies View Related

Linksys Wireless Router :: Two WRT54G And One DSL Connection?

Feb 19, 2013

Situation:  I have one Internet connection and I have need of two networks.  One filtered with OpenDNS and the other unfiltered.  I have a Speedstream DSL router provided by ISP for connecting to Internet.  I have two WRT54G's and would like to utilize them to form two networks.  The Speedstream is a router with a gateway address of 192.168.1.254.
 
From that Speedstream (only one network plug) I would like to go to a 5port switch.  From that switch, I would like to configure the two WRT's to be two different networks (one using OpenDNS settings for filtering) with one having a 192.168.1.x address scheme and the other (no Internet filtering) having a 192.168.10.x scheme.  Both would have DHCP enabled for their networks and the Speedstream would have DHCP disabled.  There is not a need (at this point) to have the networks communicate.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G V5 - Way To Get Connection

Jan 20, 2012

Ive had a WRT54G v5 for awhile now.  And just recently I went out of town and had turn off my router.  When coming back and turning everything back on for some reason both wired and wireless components both have a connection then it loses the connection for awhile and comes back on.  Ive power cycled both the router and modem. Called my provider and they said it was my router after doing some diagnostic tests.  I tried to update the firmware and ive tried to restore to factory settings. Still it has a connection then it loses it.. Ive noticed on the modem when its not working that only the SENT light is flashing. (modem has power,received,sent, cable,pc). It is on AUTO DHCP and gets a ip and everything.

View 1 Replies View Related

Linksys Wired Router :: Wrt54g - RJ45 Maximum Cable Length?

Jan 4, 2009

I am running a wrt54g and I was woundering what is the longest rj45 cable length I can run?
 
I notice running about 30 plus feet connection does not work. When I cut off about 5 feet it worked. Seems I can only run a ceratin amount of cable length with this router.

View 8 Replies View Related

Linksys Wireless Router :: Wrt54g - Configure Firewall And Wifi Encryption To Maximize Safety

Mar 20, 2012

I am in a situation where I share internet access with roommates. We have a Gateway which is conected to the provider and which delivers ethernet and WiFi signal.
 
In order to isolate myself from my roomates and to protect my network connection, both wired and WiFi, I would like to plug in the Ethernet cable I get from the Gateway to my router, and then configure my router's firewall and WiFi enctryption to maximize my safety.
 
However, I am having some problems. I have already configured the router as "router" and not "Gateway" and I am trying to assign it an IP address different from the default one, which is the one the gateway has, and a ranger of DHCP IP's, also different from those of the Gateway. In other words, 192.1681.N.1 for the router and start from there.

View 9 Replies View Related

Linksys Wired Router :: BEFSR81 Keeps Losing Wired Connection To WAP54G?

Apr 11, 2012

I have a WAP54G in my basement shop, wired to our main router upstairs, which is a Linksys BEFSR81.  I'm not sure if this is an issue with the WAP or the router.
 
I only use the laptop computer in the shop every couple of days, but I leave the laptop plugged in and on most of the time.  I used to have the power settings such that it didn't power down completely even after a long time.  With that setup, if i didn't use the computer for several days, it would find that the connection to the router had died.  The wireless link would report that it had a solid connection, but I couldn't connect to anything.  Power cycling the WAP always fixed this.
 
Recently, I decided to save some wear & tear on the laptop drive, and adjusted the power settings to go to standby after a couple of hours.   Now, it seems I can't even go one day without losing my connection.
 
I am running the latest frimware in the WAP, and the router is version 3.1.  I can't check the firmware version on the router at the moment, because the web interface is giving me a blank screen.  I know from past experience that I will have to power cycle it to get it to talk to me again. 
 
In any event, it seems like the router connection to the WAP is timing out.  I set the router "client lease time" up to 10000 a while back when I first had this problem, but that is clearly not doing the trick.

View 3 Replies View Related

Linksys Wireless Router :: Wrt54gl Much Faster On Wired Then On Wifi

Sep 29, 2012

am having speed issues on the wireless side of my WRT54GL v1.1 router.When I hook up a laptop to the wired port, am getting roughly 5.4mps down when wired, but only 1.2mpbs down on wireless. I am tried doing a factory restore. I have made sure that no QoS is in place. I have tried multiple devices to make sure it is not something on the device side causing this problem, but all the devices perform just as poorly on wireless but as well on wired.

View 5 Replies View Related

Linksys Wireless Router :: E1200 Faster Wifi Than Wired?

Jan 11, 2012

I just got an E1200 router and connected wired to my win 7 machine, Im clocking in the single digit ranges (~8 mbs) download but on my dusty old win xp laptop wireless, Im getting 20 mbs (max speed from isp 20 mbs). Wife's Mac laptop wireless, same speed. What is going on? I updated the firmware, tried altering some settings based on other entries here suggested (WPA-personal, channel to "6") but no effect.

View 2 Replies View Related

Linksys Wireless Router :: How To Know If WRT54G Connection Is Secure

Jul 8, 2011

My friend walked in with his laptop and connected easily.Yet is said it was not a "secure" connection.How will I know if MY computer has a secure connection?

View 1 Replies View Related

Linksys Wireless Router :: WRT54G Does Not Show Up In Connection

Sep 20, 2011

Linksys WRT54G in reset mode, that is no security, SSID broadcast  as linksys as it would be after pressing the reset button. When I go into the network and sharing center on my laptop running Vista and try to connect to the network it doesn't show up in the connect to a network dialog box.  Rescanning doesn't work.  My friends MAC locates the router with no problem. Disabling and enabling the wireless adapter and rebooting the laptop doesn't work.  I'm working right next to the router. If I go to Manage Wireless Networks and add add a new network manually  and input the network name (linksys) and Security Type disabled then I can connect to the router and all is well. I've set up a few routers and never seen this problem.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - PCs Lost Connection

Aug 19, 2011

I been using my WRT54G with no problems for 2 years now. I lost wireless. I have 1 pc wired to the router and it works fine, e-mail, accessing the internet, everything. But I have 6 wireless devices ( 2 PCs, a printer, Nintindo 3Ds, a laptop and a nook) that use the wireless part of the router at different times. Anyways, last night, one of the wireless PCs lost connection, not seeing the router. Then I checked with each of the other wireless devices. None of them see the router. I tried many different things: powering down the router for two hours, hitting the reset button for 30 seconds, I even uninstalled the router and re-installed it and ran the setup-wizard. Again the pc I have wired to the router works but none of the wireless devices can see the router.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved