Region : Australia
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.24 Build 130110 Rel.58124n
ISP :
The wireless drops out on my router every 1 or 2 days. I checked the LED on the router and it goes off when this occurs.I have attempted to turn WiFi back on using the 'on/off' button on the rear but it still won't work. The only remedy is to pull the power plug for a few moments and plug it back in.
Region : Poland
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.22 Build 120424 Rel.39632n
I recently bought an new router TP-LINK TL-WR842ND. After configuring it I connected it via an cable connection to my PS3. The Internet connection works correct and I'm able to use all network feature on my console.
Then I connected a USB Hard Drive to it USB port and I enabled Media Server feature on the router. I have done steps described here url... but with no results. My PS3 sees the Media Server, but when I open it it shows no files.
Region : UnitedStates
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.22
ISP : Bright House Networks
I'm having a problem as my PS3 keeps showing up as UPnP not available even though it is turned on in the router menu. What can be the cause? I want to say there is something wrong with the PS3 and not the router.
Region : Singapore
Model : TL-WR842ND
Hardware Version : V1
Firmware Version :
ISP : Starhub
Is it possible to use VLC to access the TP LINK Media Server? I have sucessfully setup the Media Server, but unfortunately I do not know how to access it using VLC or android MX player.
Region : Sweden
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : wr842ndv1_en_3_12_22_up(120424).bin
ISP :
My normal FTP download speed is 1-2 GB/Sec but downloading from the routers USB port only gives 200KB/Sec. How to improve the server speed? Another question: How many users can log in/download at the same time?
Region : Vietnam
Model : TL-WR842ND
Hardware Version : V1
Firmware Version :
ISP :
Everything seems so good until I setting up the printer server. Resources CD contains the "USB Print Service Client Setup" but the User Guide said that I have to install "TP-LINK USB Printer Controller Setup". First, I tried to install "USB Print Service Client Setup", nothing change but a small icon in taskbar allow me to start and stop service, no dialog box said me how to install printer driver. I look in tp-link website and get "TP-LINK USB Printer Controller Setup", install it but it can not detect my printer. What should I do now because I cannot uninstall "USB Print Service Client Setup"?
Region : UnitedKingdom
Model : TL-WR842ND
Hardware Version :
Firmware Version :
I've just set up an old netbook as a secure ftp server on my network. As part of the process I locked the server host IP by making the lease permanent in the DHCP/Address Reservation page of the routers web GUI.However I later noticed the MAC binding page which seems to achieve the same thing (lock an IP address to a specific adapter). I was wondering what the practical differences between the two techniques are? i.e is it better to use binding than reservation?
I have the gut feeling that binding is more robust as I'm not sure what happens to a reservation if the specified host device is removed and then the router rebooted, is the address released back to the pool of available addresses? Binding feels like that address will never be made available to another device even if that device is no longer present, or is that completely wrong?Also does the binding survive a router reboot?
Region : Others
Model : TL-WR842ND
Hardware Version : V1
Firmware Version :
ISP :
I am planning to buy TL-WR842ND as a print server with my printer HP Laserjet pro P1102 [URL]
the compatibility list shows HP Laserjet 1100 and HP Laserjet 1100A as compatible models but does not make mention of P1102
Has anyone tried using the HP Laserjet P1102 with TL-WR842ND?
Region : Spain
Model : TL-WR842ND
Hardware Version : V1
Firmware Version : 3.12.22
ISP :
I am trying to set up a VPN access to the office Windows network by setting the pptp options in the WAN area of the networks settings.
I have entered the public IP address of the office network and also the username and password required by the system. When clicking on the connect button the router attempts to connect but then returns a "disconnected" message.
Region : Sweden
Model : TL-WR842ND
Hardware Version : V1
Philips support says it has to do with the router, firewall or something. Not much good from them. But I dont know anything about firewalls or anything, all I know is that my wireless internet works fine and that the TV is linked with the router but doesn't access internet. Streaming from pc to tv works fine though
Region : Canada
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.12.22 Build 120424 Rel.39632n
ISP :
I can access the USB storage via FTP, but I wanted to access files using a Windows Explorer format. Also, anyone access the Media share ? Manual tells you how to setup the USB functions but not how to access from a PC.
Region : Italy
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : TL-WR841ND_V8_120802I
Setup the WR841ND in wds and easily connect to d-link.with the ping utility of the WR841ND I can reach the d-link or any of the PCs attached to the d-link and receive an answer.but any PC 'attached via LAN or WIFI to WR841ND can ping only WR841ND and not the d-link or any other PC attached to the d-link (clearly not even go on the Internet
Region : Mexico
Model : TL-WR841ND
Hardware Version : V8
Firmware Version :
ISP : Telmex fiber
I use this router to replace the FO rooter that my ISP provides with the service as it's too limited (no NAT name translation, closes NAT, no uPnP etc...)
So the WR841ND acts as my main router, DHCP server, WiFi AP for all my network. My problem is that once in a while ( every 1 or 2 days) the wireless loses functionality, I still can see it from my devices, but can't connect, even fixing the IP (apparently not a DHCP issue then). The only way to fix this is to shut down the router 10 sec and restart it.
This brings another issue, I have another router (WR741) in WDS dispatching the signal to another part of the house to wired devices (Xbox , wd tv live hub) and it loses the WDS link, again the only way for this router to recover it is to restart it which is annoying.
Region : Portugal
Model : TL-WR841ND
Hardware Version : V8
Firmware Version :
ISP :
Yesterday I bought this router to extend my wifi signar from my cable router. Now I know that it is possible using the WR841ND as an wifi extender using third-party firmwares but what I like to know is if there is any way to make the router work like that but using the original firmware. I followed a guide that explained how to do it but the only thing I can do is extend the wireless signal without the internet acess.
Region : Canada
Model : TL-WR1043ND
Hardware Version : V1
I was wondering if it is possible to connect two routers through wireless and make them talk to each other. Here is why I need it, I currently Have 6 wireless IP Cameras going too 8. 2 are wired on one router in my house and the other 4 are wireless(with wired capabilities) Im going to wire the other 4 too a 2nd router so the cameras are always running and don't suffer any down time due to signal loss (happening a lot at the moment). How can I get Router B to talk to Router A, so I can look at all of the cameras from Laptop in my house which is closer to Router A.
My Router A is TL-WR1043ND, I'm also going to probably buy another one. How to configure it properly. So I can login to the cameras from my laptop.
-Region : UnitedKingdom
-Model : TL-WR841N
-Hardware Version : V8
-Firmware Version : 3.13.18 Build 120522 Rel.31564n
-ISP : Virgin
I bought a TL-WR841N to use instead of our Virgin Super-hub which dropped the wifi regularly. It took me a while but I stumbled with the set up and got it working.Super-hub (in modem mode) - cable - TL-WR841N - 2 x cables running to 2 switches for (TV, Sky+, WII) and (PC, X-Box). Everything is spot on apart from the other half's Iphone and Ipad. Neither of them can get on the web in the bedroom. Both apples will join the network, but none will be able to get onto the web. The Wifi bars are on display on both products but they just keep spinning and searching to get on the web. I bought a Huawei repeater plug hoping that would work, but it just slows down everything else that can get on the network.Remembering that this happens only in one room, is there something that I can alter that would let these 2 apples access the web besides walking out on the landing every time she needs to update a web page ?
Region : India
Model : TL-WR940N
Hardware Version : Not Clear
Firmware Version : 3.13.27 Build 121101 Rel.38183n
I have bought TP-Link TL-WR841N 300 mbps router. I have 20-25 wireless clients but only 15 wireless clients are able to connect to the router. Is there the limitation on numbers of wireless clients can connect to the router?
Region : Netherlands
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : V1_120405
ISP : UPC
After buying and installing i get no wlan/wifi connection.I do have internet by ethernet, the laptops and ipad sees the wlan/wifi but get no connection? Resetting re-installing manualy or with the wizard doesn't work.
Region : Netherlands
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
I installed my brand new TP-Link router and both wired and wireless internet connection work perfectly fine. But when I tried to secure the wifi with a password (I followed the instructions on last page of installation guide) I can not connect to the internet any more. After entering the correct password, both iphone and mac-book simply say "unable to join the network". I selected WPA2-PSK-personal as recommended. For now I switched off the security settings, but I live in a building with many neighbours and they are now consuming most of my bandwidth (apparentlyI am surrounded by illegal downloaders
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP : HughesNet
I received this router today, I have a MacBook Pro and a iPhone. The router came with a very small cd, I was very disappointed because , when I purchased this router from amazon , the discription read that this router is Mac compatiable. But that is not true if the cd is not compatiable! My problem is I get a good signal for wifi, but I can not open any websites with my Mac or my iphone.
Region : Others
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP :
I have 2 TP-Link # 941NDs at my home. ( version 3.6 )In the new ( second ) TP link, i activate WDS - Wireless Bridge. And configure it to through Wi-Fi connect with earlier TP-Link, and also to act as router to cater to PCs within its range. IPs are set as per of same family as that of primary TP-Link, and further, DHCP been de-activated as well. Have sent WEP security as well.It performs correctly for the time, its stays ON, but when its switched Off, and then On again, it is not able to connect to the primary TP-Link and thus not able to serve its client PCs.
Region : Others
Model : TL-WR941ND
Hardware Version : V3
Firmware Version : 3.13.9 Build 120201 Rel.54965n
We are trying to use a TL-WR941ND purchased about a month ago, but it keeps hanging, usually within a day or so of operation.To be clear: by "hanging" I mean the device stops providing wireless services (its SSID is no longer visible in WiFi clients) and becomes nonresponsive to pings or control access attempts (via settings web page) from the internal network connections.The device is used in a very simple scenario, where it's being employed as a simple access point, not as a router. As such, the device's configuration is as follows:
* WAN interface is configured with a dummy static IP (10.10.10.10/24) with gateway and DNS set to the internal IP address of the actual routing device connected to the external world.
* LAN interface is configured with an IP address inside the actual internal IP subnet (192.168.1.0/24).
* DHCP is also disabled as this service is already provided.
* Wireless settings: radio enabled, SSID broadcast enabled, WDS disabled, 11bgn mixed mode, auto channel width, max TX rate, channel 7 (manually set). Using WPA-PSK security.
Rest of the settings are unchanged from their default values, as the device isn't being used as an IP router by any client - just as a WiFi/Ethernet layer 2 bridge. We're using what appears to be TP-Link's latest stock firmware for the device.The settings described above appear to provide the connectivity required by the WiFi clients. However, the device continuously hangs within a day or so of operation, requiring someone to physically attend to the device and cold-restarting it (disconnecting it from power and reconnecting it) to regain an operational state.
After performing a cold restart, the system log shows nothing beyond the startup entries: "System started" entry followed by security info entries regarding enabled protocols. Then the device appears to work well for a while, until it hangs again, forcing again someone to attend to the device, etc.
Region : Poland
Model : TL-WR941ND
Hardware Version : V3
Firmware Version :
ISP :
I have a problem with files sharing via wi-fi. I can not share files over the network using wi-fi connections. While the network is the cable connection sharing is available. The network also acts as one computer is connected by a cable to the router and the other via wifi. But if the two computers are working through wifi network does not work. Are there any settings in the router, which can cause blocking calls via wifi?
Region : Belgium
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Telenet
I've just bought a TP-Link TL_WR1043ND and when I was configuring the wireless settings first I had a +- 40Mbps connection,a little later the connection dropped to 4Mbps and was constantly dropping the speed.Sometimes it went to 15Mbps and then it drops back to 4Mbps.Right now its only 1Mbps.
Configuration:
Wireless channel: 11
Mode: 11bgn mixed
Channel width: Auto
Max tx rate: 300Mbps
Wireless router radio and SSID broadcasting enabled
[code].....
Region : Romania
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : latest
ISP : RDS
I am experiencing an issue since I bought my new laptop.I connect to the Internet with Windows 8 and TL-WR1043ND.My issue is that ever since I installed the printer utility from the site I hear an ON/OFF sound in my speaker randomly and I can not figure out what`s wrong.I think it`s trying to search for my printer but it it off.Also wi-fi disconnects randomly ever since this application was installed.What can I do to fix this issue.Computer works fine without the application.There is no report about this issue in the Event Viewer.
I have recently acquired a network connection of 100Mbps download and upload, and a dir 615 with dd-wrt.
I made all the connections and configurations , and everything seems to work fine it says it's connected at 300 mbps wifi, except it is not . I tested the internet speed and got this :
80 mbps Upload
35 mbps Download
I know that connecting via wifi will loose bandwith, the problem ins't that, I just cant seem to find the cause for the download rate to be less than upload and not equal... , when connected to the cable I get a stable 100/100.
Acing some issues with my Belkin router, I can connect to it wirelessly and maintain an Internet connection. Sometimes I notice on my wifi signal symbol in my task bar that the connection closes and reconnects. This doesn't bother me too much, however, after doing that I don't know how many times it will reconnect but the network will not identify, which as you would know that if it cannot identify the network the access is limited and therefore I cannot connect to the Internet. I know it is a long winded problem but I am struggling to find out why this is happening. It is a Belkin f5d8636-4 v2 modem and a tp-link wireless adapter for my pc (achieving a 300mb/s wireless connection)...
View 19 Replies View RelatedI have been having intermittent wireless trouble. This includes Ping spiking, Wireless network drop-outs (The network stop appearing on available network list) and packet loss. This is all completely random (though very common) and is frustrating to say the least. As far as I know, the problem is not nearly as bad on other devices in the house , so I suspect that my network card has become shoddy. I have tried updating,removing,and re-installing network drivers to no avail. I have also used cmd and I have pinged 192.168.1.254, which shows random ping spikes, and some packet loss as well.
View 9 Replies View RelatedRegion : Germany
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : 8.1
ISP : M-Net
I set up my router and it does not get a WAN IP.The PPPoE user/pw ist 100% correct but in the "status field" it always says: "connecting" and i can't get an IP.The router is connected with the modem via RJ45 cabel that was in the box.My PC has no problem getting to the internet with direct modem communication (pppoe).
Region : Others
Model : TL-WR841ND
Hardware Version : V7
Firmware Version :
ISP :
my ip address is not static i use no-ip sevice to get dns how to set my tp link for wake on lan
I managed to update ddns in my tp link How do I go from here?
I am currently running a TL-WR851ND Wifi Router whith the latest build 3.13.27 Build 121101 Rel.38183n() published last November 2012. Now is there any new firmware?
View 1 Replies View RelatedRegion : UnitedStates
Model : TL-WR940N
Hardware Version : Not Clear
Firmware Version : latest
ISP : Time-Warner
Just purchased the WR940N to use as a wireless bridge. I expected to be able to have the router join my wireless network, and provide Ethernet connectivity to 4 devices behind it. But I'm missing something in the configuration. I can get it on the wireless network, and manage it via the wireless network. But devices plugged into the Ethernet cannot get out to the Internet. Basically, I have a 192.168.1.x network, and the router is node 192.168.1.3 on the wireless network. I've turned off the firewall and DHCP on the router. The Ethernet devices behind it get an address from my network, but the router inserts its own address in as the default gateway, and my Ethernet devices do not have a route to my 192.168.1.x network, despite having an address on it.
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version :
ISP :
Region : Argentina
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP :
I have a WR1043ND
Firmware Version:
3.13.12 Build 120405 Rel.33996n
Hardware Version:
WR1043ND v1 00000000
I tried to connect a WD MyBook Essential 3tb hdd NTFS, but it never recognized it. Of course, I connected it with the external power supply.With a 15gb pendrive FAT32 it works OK.