Unable To Access Admin Page Of Baitone Router?

May 22, 2012

I was doing some changes in baitone router due to mistake i have disabled something in it.Now i am not able to access its admin page....Before it i was accessing through 192.168.1.1

View 3 Replies


ADVERTISEMENT

Linksys Wireless Router :: Unable To Access Cisco Admin Page For 54G V5

May 3, 2012

I moved. Runnig an iMac at home. Can connect to the internet but was not able to access my cisco admin page for 54G V5.  Also need to connect VPN but unable to. 

View 1 Replies View Related

Unable To Access Router Admin Page Haier R800 Router

Dec 13, 2012

Unable to access router admin page for Haier model R800

View 1 Replies View Related

Can't Access Admin Page Through Router?

Jul 3, 2012

Moved into a new place, set up a connection. Server provider gives only one mac address, they set it on my router. They say that it should be working, make a restart and that's it. I did that but still no connection. Moreover, I cannot connect through the router at all and therefore cannot access router admin page to configure it either. Now what to do? Password for the router is correct. Even when I take down all the security, still I cannot connect.To be more specific, at first I could enter the router admin page, but since I didn't know how to configure it properly, I made some mistake. I think I choose setting "configure wireless network" and changed something there. After that I cannot access the admin page or connect through the router.

View 1 Replies View Related

Linksys Wired Router :: BEFSR41 Lost Access To The Admin Page

Nov 13, 2007

I have a BEFSR41 V2 working as dial in ADSL connection.While I changed my settings of the UPnP in the router I lost access to the admin page. Well most strange is that everything is working.I kept my internet access as well as the computer and printer access.The only thing I lost is access to the router admin page.The password it was not defaulted to admin, neither kept the password that I had set up.

View 9 Replies View Related

Linksys Wireless Router :: E1200 - How To Access Router Admin Page

Apr 1, 2012

I want access the my E1200 website in order to implement new username and password to secure the network.

View 1 Replies View Related

Cisco WAN :: Can't Access Point Admin Page (WAP4410n)

Feb 26, 2012

I'm having trouble setting up my WAP 4410n. I can connect to it wirelessly, I can ping it, but somehow when I try to connect to the admin intervace (in my case 192.168.1.36) I get the following error message:
 
"The connection was reset. The connection to the server was reset while the page was loading"
 
My I shut down my firewall, restarted my router, removed cookies and cleaned cache, but that's as far as my knowledge goes.

View 5 Replies View Related

Protocols / Routing :: Can't Access Wireless Repeater Set-up / Admin Page

Dec 27, 2012

I have two wireless repeaters and can no longer access their set-up / admin page via default IP 192.168.10.1,I don't know the brand of the repeaters, which are commonly sold on eBay. Here's one example: eBay Item # 300829809133, They work well as repeaters, but it's frustrating that I can no longer access their set-up / admin page via default IP 192.168.10.1. Right now I have only one repeater plugged in and connected to my laptop via ethernet cable. The 2nd repeater is unplugged. The Wifi on my laptop is switched off and disabled, so I'm actually connected to the Internet via my laptop's ethernet port via ethernet cable to the repeater's ethernet port, then via wifi signal from the repeater to my Zyxel wireless router and Comcast cable modem. If I'm connected to the Internet via the repeater, why can't I access the repeater's set-up / admin page using default IP 192.168.10.1? When I enter http://192.168.10.1/ into Internet Explorer, I get only the error message "Internet Explorer cannot display the webpage"

View 3 Replies View Related

Cisco Routers :: How To Access RV220W Admin Page On IPad

Jul 14, 2011

How to access the admin page of the RV220W from an iPad wih the default security certificate? If so, what steps did you go through? Or is this only possible when purchasing a certificate?

View 10 Replies View Related

D-Link DIR-655 :: SBS2008 - Network Filter Blocks LAN Port Access To Admin Page

Oct 16, 2011

I'm using my 655 as a WAP, so nothing is connected to the WAN port.  Since I run a SBS2008 in my home, I also have the 655's DHCP disabled.If I enable Network Filtering, everything inbound/outbound on the LAN ports works except accessing the Admin page.  Even if I put the connecting PC's LAN MAC in the tablet.

View 9 Replies View Related

Unable To Access Router Configuration Page?

Aug 8, 2012

I have the issue of being unable to access my router configuration page. My standard gateway IP (83.226.48.1), does not work, resulting in "unable to connect". If I try with my IPv4-adress, it just comes out with a blank page (Mozilla Firefox and Internet Explorer).

View 17 Replies View Related

Accessing The Router's Admin Page?

Jan 29, 2012

I have a binatone wi-fi modem. Internet is working good from router but i am not able to connect to router admin page i.e 192.168.1.1 and not be able to change wi-fi password.

View 3 Replies View Related

Linksys Wireless Router :: Wrt120n Unable To Access Settings Page

Jan 6, 2012

Have a PS3 that will connect to my wrt120n if I unplug the modem and router then plug back in after 2 minutes. if I shut off my PS3 or after approx 1 hour, PS3 drops my connection. I'm trying to access my router page online but after entering the default into my browser, the pop up box will not accept any combo of entries to allow me access. I have an SSID name and my router is password protected. It does not connect me when I use any combo of user name or password or the default "admin".

View 2 Replies View Related

Routers / Switches :: Cannot Connect To Router's Default Admin Page?

Dec 25, 2012

Motorola wr850gp wireless router. The default ip is 192.168.10.1. I attempted to use it as a wireless access point and now it is not working at all. I tried connecting the router LAN port to the computer and 192.168.10.1 pulls up nothing.I tried connecting the modem to the WAN port and the LAN port of the router to the PC, but then I have no internet access at all. I tried resetting the router, still nothingAll lights on the router are green. I don't know what the heck is going on?

View 3 Replies View Related

D-Link DSL-2680 - Can't Connect To Router's Admin Page (timeout)

Feb 28, 2011

For about a month or two now, I've not been able to connect to my router's admin page @ 192.168.1.1 I am using a D-Link DSL-2680 router.

Whenever I go to connect to 192.168.1.1 in my Web Browser, it just sits there trying to connect and does nothing. But eventually after some minutes I get the error: 'This web page is not available The web page at http://192.168.1.1/ might be temporarily down or it may have moved permanently to a new web address. Error 101 (net::ERR_CONNECTION_RESET): Unknown error.' Here is a screenshot:

I tried pressing the reset button on the back of my router, but it would just sit there with the green power LED and another green LED just flashing constantly (I assume this is the ethernet 1 cable LED) and this happens for more than 10 minutes.

All I want to do is just port forward my game servers again without the use of Hamachi or other programs

View 2 Replies View Related

Linksys Wireless Router :: Cannot Connect To Admin Page At All On E3200

Feb 23, 2012

I don't have to completely reset my router as I have a ton of configs on it.  Anyway, recently for some reason, I lost all access to my admin page.  Cisco Connect also cannot find the router.  Funny thing is that all of my wireless profiles work just fine.  Meaning all of the computers in my home connect to the internet just fine using the router.  Both the guest access and WPA connected machines.[url]...

View 1 Replies View Related

Linksys Wireless Router :: E3200 Admin Page Times Out

Dec 18, 2011

I recently tried to edit settings on my E3200 and was unable to get to the page. I typed in 192.168.1.1 in the address bar, made sure no proxies were enabled and tried on wired and wireless computers and all the times it said "page could not be displayed" i haven't not reset with the button on the back. I also did an map scan of the router and this is what came up
 
Interesting ports on 192.168.1.1:
Not shown: 65531 closed ports
PORT STATE SERVICE
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
1780/tcp open unknown

View 2 Replies View Related

Linksys Wireless Router :: EA6500 Admin Page Hangs On Login?

Feb 3, 2013

I have been through three chat sessions on this without resolution and support tells me just to factory reset. After some time (weeks) after a successful local login to the admin page subsequent attempt to login just hang. After entering the admin password the page changes and says "Waiting" under revolving circles. It will sit there for over 1 hour. I have tried IE, chrome and firefox on Windows 7 and Windows 8 on three different machines and it behaves the same. Of course I have to go through this same process with the support people every time and every time they come to the conclusion that I have to do a factory reset. But so far Linksys denies that there is a defect.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Can’t Open Admin Page

Oct 24, 2011

I have set up a second E4200 as an AP.Even though I’m getting a signal from it I can’t open the ADMIN page. Also, it’s NOT showing up on my main 4200 "DHCP client table'.I configured it as a static IP 192.168.1.145 during setup and still cannot get in. My ping to .145 comes back “timeout”!Since I’m getting a full signal from it, it must be working so why can’t I get in and why doesn't it show up?

View 7 Replies View Related

D-Link DIR-601 :: Unable To Get WAN Admin Access?

Apr 13, 2012

Router is a DIR-601 hardware B with firmware 2.00NA Using the router connected to a cable modem, I was unable to gain admin access via WAN.To troubleshoot the problem, I connected the router to the LAN side of my main router (DHCP server, DNS, etc.) The primary router correctly assigns a WAN IP to the 601. The 601 operates normally to access the Internet either via its WiFi or via Ethernet. The 601 is configured for a different IP address range on its LAN side so there is no IP address conflict possible with my main router.On Tools->Administration, Enable Remote Management is checked, Remote Admin port is 1080 (I've tried others), and Remote Admin Inbound Filter is set to Allow.In this case the WAN IP address of the router is 192.168.0.98. When I go to http://192.168.0.98:1080/ with a web browser from the WAN side, I get no response. From the same computer I can ping the router with "ping 192.168.0.98".I figure I have to be missing something here. It appears that this feature just is not there, but others must have this working. It seems like I've tried every possible combination of filters, port numbers, etc., but it just doesn't respond from the WAN side. (192.168.1.1 on port 80 works just fine from the LAN side.)

View 3 Replies View Related

Linksys Wireless Router :: WRT54G - Lost Username And Password For Admin Page

Apr 30, 2007

I seem to have lost my username and password for the admin page for my WRT54G router.Is there a way to retrieve or reset the login?

View 9 Replies View Related

Linksys Wireless Router :: WRT610N - HTTPS Secure Login To Admin Page?

Mar 29, 2013

I am trying to log into my WRT610N version 2.0 Router  admin page 192.168.1.1 using the secure HTTPS://192.168.1.1 protocol I have the router local management setting to allow both http and https access login:192.168.1.1/Management.asp I am using Microsoft IE version 10 and Firefox version 19.02 and latest Chrome browsers and none of them will work using the HTTPS protocol.This used to work in the past using older versions of the browsers though I would see a certicificate error warning.I have 2.00.01 build 15 firmware installed and I already tried reseting the router.  Perhaps the router needs new firmware update to handle this with the latest browsers?

View 6 Replies View Related

Cisco Routers :: WRVS4400N - Unable To Access Admin Console

Jan 18, 2013

Although I hasten to point out that I have owned and used an 'IBM' type PC since 1988 and have always managed to get things configured correctly until NOW!
 
Apart from the last time I tried to use a Linksys product. I had the WRVS4400N recommended to us by a friend as we run a small FTP server to share promotional materials amongst sales operatives around the world, wanted to protect it from intrusion and was told that a Cisco Linksys product with a VPN was the way to go.
 
I duly purchased a WRVS440N and have been trying to log into the admin console via both browsers (IE9 and Google Chrome) that are installed on a laptop running Win7 which in turn is the only thing connected to the stated device via ethernet port 1... I have tried accessing it via http://192.168.1.1 and have even tried a suggestion from another forum to try https://192.168.1.1 - this only results in my being told that the address does not have a trusted certificate and I even tried every suggested workaround...
 
I have tried all kinds of reset periods from 10 seconds to a minute, both hot and cold and each time the result is the same - I type in 'admin' and 'admin' in the appropriate boxes and the dialogue box continues to return to the browser window with empty fields...
 
The shame is that I have managed to re-flash a BT Voyager 190 ethernet modem successfully with DynaLink v3.29a firmware (which allows it to be used with any ISP besides AOL [for whom this modem was solely intended]) and can set it up as a DHCP server, non-DHCP with a single link to another server or non-DHCP and no link.... The point is the modem works... I'm using it right now to type this! We have a single static IP from our ISP and the BT modem is working just fine (as is the TP-Link wireless modem/router that the WRVS4400N was intended to replace)... there are other options in it's firmware for port forwarding, etc and I'm convinced that it wil be adequate for use in conjunction with the WRVS4400N.
 
I have to concede that the WRVS4400N was not sold to us as NIB; it was sold as re-conditioned and was shipped to or via Ingram Micro Distribution from Cisco Systems, Veldweg 3, Herkenbosch 6075 NL (Holland) via UPS on or about the 31st of July, 2012... there is a shipping label on the original packaging that tells me that so it has in fact been back to Cisco at some point and for some reason.

View 3 Replies View Related

Cannot Access Router WRT54GX Web Page / Setup Page?

Jul 28, 2011

i need to get into the web page because i need to open my XBL nat and when i type in the password to get into the routers page i get a blank screen

View 2 Replies View Related

Unable To Access Internet / Home Page Once A Day

Oct 3, 2011

For the past weeks, I've been experiencing NOT to able to 'access' Home Page on daily basis. It occurs exactly 'once a day,' often early morning but sometime even in the middle of night. For this to resolve, I need to unplug a black cable connecting to Router and plug back in to 're-start' Internet connection. This pattern happens after having replaced a brand new modem and router, saying a Modem has an issue diagosed through the phone of my ISP.

With an older modem, however this, .... 'disconnection once a day' never occured. The tech guy told me 'signal' is OK, but there are 'too many computers' in my household. However, my ISP, Comcast allows us to use 5 different PCs, then the tech. guy's diagnose did not correspond to this at all.

As to 'multiple PCs,' we, the family never use more than 3 PCs/Internet at a time. Most of time, we use only two PCs for surfing and e-mailing/photoes. Two other PCs are a sort of 'back-up' puposes ONLY.

View 3 Replies View Related

D-Link DIR-655 :: Can't Get To Web GUI Admin Page

Oct 30, 2011

I followed this simple procedure to turn my DIR-655 into an access point: url...and it all worked except when I go to url... (which is where I left the router's IP address set) I don't get the DIR-655's admin login GUI, just a timeout.  Since my main Linksys router is on 192.168.1.1, and my cable modem is at 192.168.100.1, and the DHCP addresses handed out by the Linksys router is from 192.168.1.100 to 192.168.1.149, getting to 192.168.0.1 should not be a problem.  Functionally, the DIR-655 makes a great access point, wired and wireless are working very well, and I don't see any reason why I can't get to the web GUI admin page.I should be able to get to the DIR-655 router via the WAN port, as suggested in the procedure above, but I'd really really like to be able to get to it without having to connect a cable to the DIR-655 WAN port.

View 5 Replies View Related

Unable To Access Company Intranet / The Page Cannot Be Displayed

Nov 15, 2011

Basically we have 5 users in one of our offices and the internet works completely fine.However we cannot access the company Intranet. We receive 'The page cannot be displayed'.I have no idea why because all other sites work okay!Note: The Intranet can be accesed from home and libraries as I have checked aswel as 2 offices we have, everything works fine.It's just the one office and everything else works fine.

View 2 Replies View Related

D-Link DIR-655 :: Can't Connect To Admin Page

Feb 19, 2013

I'm plug with my laptop on the DLINK, no internet connexion available, and it's impossible to connect to 192.168.0.1 ..What am i suppose to do, i need to configure a static ip and specifics dns to get to the internet, and it seems that without internet i can't acces to 192.168.0.1 ...

View 1 Replies View Related

Routers / Switches :: Unable To Access IP - Getting Blank Page After Signing In?

Mar 4, 2011

I tried to log on to my wireless routers IP address but it only gives me a blank page after signing in. the IP address is 192.168.1.1. Is there a problem with this ip address?

View 1 Replies View Related

Unable To Access Wireless Adapter Configuration Page To Update Firmware?

Oct 25, 2012

My internet connection is fine but I really need to update the firmware on my wireless adapter. I have no problem accessing the router's config page. I ran ipconfig to get the adapter IP (screenshot attached/192.168.2.104). When I type the IP into the browser I get the "cannot display webpage" msg. I have tried turning off the power to the router, disabling Norton's firewall (I disabled Norton completely), and nothing works. Do not tell me to restore factory defaults on the adapter because I tried to get to the configuration page of another wireless adapter I have and am having the same problem.

View 7 Replies View Related

Linksys Cable / DSL :: WAG120N Empty Admin Page?

Dec 14, 2010

I have this problem since updating my firmware from 1.00.12 to 1.0016 (Annex A)
 
Problem: After leaving the router on for 1 day(dont know exactly how many hours), I tried logging in again on the admin page 192.168.1.1. Auth box appears, put username & password, but blank page after that. Tried using Safari/Firefox and it's the same. Router is working, all the LED lights are good, Internet is working, DHCP and all other config is normal. It's just that I can't access the admin page anymore.
 
When I power on/off the device, the problem is gone. Admin page is accessible again. But after some number of hours again, same problem blank admin page.
 
Does it has something to do with the router config like g.dmt/dsl 2 ? 

View 9 Replies View Related

Cisco AAA/Identity/Nac :: Banner For ACS 5.3 Admin Login Page

Feb 20, 2012

Is there a way to put a login banner on the ACS admin web page?  Either display it directly on the web page or do a redirect to a banner page?  Can I edit the admin pages directly or does ACS provide a mechanism to add this type of feature?
 
We are using ACS 5.3 running on VMWare.

View 2 Replies View Related

Linksys Wireless Adapters :: Wet54gs5 Unable To Access Wifi Bridge Though Web Page

Mar 29, 2007

I just got a WET54GS5 to use for game systems. i wa able to use the software in order to get the system online and working, but i am not able to access the wireless bridge though the web page. the username is blank and i put in the correct password, but it does not go through.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved