Cisco Switching/Routing :: Upgrade TAR IOS Image In 3560 Switch?

Oct 31, 2012

I wanted to upload image having .tar extension in Cisco 3560 switch. What are the steps to upload.

View 1 Replies


ADVERTISEMENT

Cisco Switching/Routing :: Upgrading IOS Image On 3560 Switch

Sep 10, 2012

i am facing an error while upgrading the IOS image on 3560 switch. [code]

View 1 Replies View Related

Cisco Switching/Routing :: Upgrade WS 2960 24 TC-L Switch With IOS Image

Jan 8, 2013

I am trying to upgrade my cisco WS 2960 24 TC-L switch with the IOS image c2960-lanbasek9-mz.122-55.SE6.bin and my existing IOS image is c2960-lanbasek9-mz.122-50.SE5.bin. when i  am copying it to flash, it is getting copied but when i tried to boot it after entering command boot system c2960-lanbasek9-mz.122-55.SE6.bin , it gave me an error.
 
both flash dir and error are attahced herewith.

View 14 Replies View Related

Cisco Switching/Routing :: High Memory Utilization Of 3560 Switch After Upgrade IOS

Mar 5, 2013

I upgrade the IOS of my switch 3560 from   C3560-IPBASE-M), Version 12.2(25)SEB4,  To   C3560-IPBASEK9-M), Version 12.2(55)SE5 after that the utilizatio of the memory increase to 80% I attached the output of show memory statistics history

View 5 Replies View Related

Cisco Switching/Routing :: 3560 ISO Image Installation XY Mode

Apr 24, 2013

I have L3 switch 3560 v2 cisco switch. If i connect the switch via the console cable in  XP system i am not getting any responce. I think i need to install via XY mode.
 
how can i install the ISO iamge via XY mode in cisco switch 3560 v2.Cisco Model: WS-C3560v2-48tS-S.

View 10 Replies View Related

Cisco Switching/Routing :: Upgrade 6509-E Ios Image?

Jan 9, 2013

I am going to upgrade the IOS image on 6509-E SUP 2T  from 15.1 to s2t54-adventerprisek9-mz.SPA.150-1.SY3.bin switch and i would like to know whether i would need to upgrade the boot loader image as well.

View 4 Replies View Related

Cisco Switching/Routing :: 2950-24 Upgrade IOS And Delete Old BIN Image

Aug 7, 2012

I own the Cisco switch,2950-24.When power on,it says Crash fault with information showed below: [code] Then I search google.com and found the resolution of upgrating IOS.I push mode button before power.Then I access into the CLI.I checked the files in the flash: and got these. [code]

View 8 Replies View Related

Cisco Switching/Routing :: 7206VXR Boot Loader Image Upgrade

Jan 22, 2008

I am planning to upgrade BootLoader image of 7206VXR router due to booting issue. The router is not booting .But if I go to rommon and give boot it will boot.So I am upgarding my Boot Loader image. Now the Bootloader image and IOS image are exactly same.Can I upgarde the Bootloader image to latest version without upgarding IOS?

View 3 Replies View Related

Cisco Switching/Routing :: 3750X 12-SFP IP Base - Upgrade To IP Services Image

Jan 23, 2013

How can I Upgrade a Cisco 3750X 12-SFP switch with IP Base to IP Services Image?

View 1 Replies View Related

Cisco Switching/Routing :: 2960 - Upgrade IOS Image On Multiple Devices Same Time?

Sep 5, 2012

I have a 10nos of cisco 2960 switches and 1no of cisco 3725 gigabit switch. all 2960 switches are parallaly connected to 3725 switch though fiber.
 
all the switches are having same vlan and public ips for management.
 
Now I want to upgrade IOS for all 2960 switches at a time, how to up grade IOS same time for all switches.

View 1 Replies View Related

Cisco Switching/Routing :: Upgrade IOS Software Image On 4507R+E With Dual Sup6L-E

Jun 27, 2012

Is there any docs with step by steps on upgrading the IOS software image on 4507R+E with dual sup6L-E ?

View 3 Replies View Related

Cisco Switching/Routing :: 2811 / Upgrade DRAM Of 256MB To 512MB To Support 15.1 IOS Image?

Dec 12, 2012

I want to upgrade my DRAM of 256MB to 512MB to support 15.1 IOS image.Can I buy Cisco approved DRAM from third party Like [URL]

View 1 Replies View Related

Cisco Switching/Routing :: Upgrade The IOS In 3560?

Oct 7, 2012

I am trying to upgrade the IOS in 3560 but I am facing one issue. Its flash is 15MB & available space is 8MB whereas the IOS is of 11MB. How can I upgrade the IOS without upgrading the flash?

View 4 Replies View Related

Cisco Switching/Routing :: 3560 IOS Upgrade And PBR

Nov 21, 2012

I have a 3560, which is being used as our core router that I have recently installed. It still has the standard IOS which came with (C3560E-UNIVERSALK9-M) it but I need to implement policy based routing so need to upgrade it and have downloaded c3560-ipservicesk9-mz.122-58.SE2.bin and indeally would like to install it in the morning before people start work.

I have 2 questions, 1, Is the ipservices capable of PBR as I have been reading conflicting reports, in fact my friend who works for Cisco has advised that it is not possible on the 3560.

2, When I do upgrade will there be any current configurations that are not compatible with the new one, I wouldnt image that there would be any but just wanted to make sure as it would be the biggest headache ever if it went wrong.

View 7 Replies View Related

Cisco Switching/Routing :: 4500 IOS Image Not Included In Switch Box

Dec 2, 2012

We've ordered a 4500 core switch and 4948 Server Farm switch for our client, but the switch box does not include a IOS image CD or anything related to IOS image and now the client is asking us why is this item missing as the IOS

-S45UK9-32-1502SGCAT4500e SUP7e Universal Crypto Image 
-S49IPB-12253SGCisco CAT4900 IOS IP BASE W/O CRYPTO 

View 4 Replies View Related

Cisco Switching/Routing :: 35609-X - Wrong Image On Switch

Mar 17, 2011

I inadvertantly copy the wrong image on to a 35609-X switch and now it gets stuck in a particular mode.
 
The original image was:  c3560e-universalk9-mz.122-53.SE2/c3560e-universalk9-mz.122-53.SE2.bin and I replaced it with: c3560e-universalk9npe-mz.122-55.SE1.bin ( this is what the download site identifies as the image for 3560X-24P-S)
 
It now sticks at:  Front-end Microcode IMG MGR: Programming device 0...rrrrrrwssssssssssssssssssspssssssssssssssss
 
How can I get back on to delete this image?  It ignores the break key.

View 5 Replies View Related

Cisco WAN :: Upgrade IOS For C2960 And Switch Does Not Boot From New Image

Dec 29, 2011

I upgrade the IOS for switch c2960 and the switch do not boot from the new image.See the files attached.
 
show version
show boot
show flash
 
There is a mistake with settings?

View 3 Replies View Related

Cisco Switching/Routing :: 3560 IOS Upgrade On Production Network

Nov 21, 2012

Looking for input/thoughts on the upgrade of our 3560's and 3750's while on production network.
 
While we could remotely send the IOS over the network to the device, I'm concerned about errors and the lack of physical control of the device. So, the thought is to just go to the comm closet, plug in with laptop to the console port, and upgrade the IOS over the console port. But this would require xmodem, correct? I know the fastest way would be to a. configure an empty fa0/0 port to no switchport, add an IP address, and use tftp. BUT, we would have to isolate the switch from the production network while connected to it with our laptop. Otherwise, our laptop would be seen on the network as an unknown device, and there would be repercussions...
 
So, we console into the device, and u/l the IOS that way. Is there a way to increase the baud rate on the switch to 115200, change putty to 115200, then do the x modem? I just say we should shut all the ports to isolate the switch from the network, then tftp the IOS to the switch. Unplug, reopen the ports, then reboot the switch.

View 11 Replies View Related

Cisco Switching/Routing :: Boot 4503-E Switch From Secondary Image?

Sep 13, 2011

We have Cisco 4503-E switch and software version is cat4500e-universal.SPA.03.01.01.SG.150-1.xo1.bin. Now i have uploaded cat4500e-universal.SPA.03.02.01.SG.150-2.SG1.bin IOS-XE software in the switch and want to boot the switch from this image.

View 17 Replies View Related

Cisco Switching/Routing :: Possible To Load LAN Base Image On Switch 2960 TC-S

Nov 19, 2012

I'd like to know if is it possible to load lan base image on Cisco Switch 2960 TC-S. This model (WS-C2960-48TC-S) come with lan lite image and it's the same (phisically) of the 2960 TC-L (lan base image).If I try to upload the lan base image on flash of 2960 TC-S will works?? ..or the switch goes damaged?

View 2 Replies View Related

Cisco Switching/Routing :: 3750X Switch Doesn't Load Image?

Oct 31, 2011

I've 3750X switch that isn't loading email. then I went to rommon mode and accidently for "format flash". after that I loaded 15.0 SE2 s/w on it using tftp server but it doesn't boot up with that image. flash had only .bin file after I loaded it from tftp server.
 
since it wasn't booting up, I did format flash again and thought to load image again from tftp server but now, it doesn't load image from tftp server.

View 9 Replies View Related

Cisco Switching/Routing :: 3560 - Upgrade To Make Voip Network And Wireless?

Jan 21, 2013

i have 300 user in network  in 2 building and firist buiding 5 flors.i use subnet /22.i have core switch 3500xl fiber and 8 swith 3560 and my network have 2 router one for adsl and other for mpls so i want upgrade it to make voip network and wireless
so if i need replace switch what i model and how many?

View 5 Replies View Related

Cisco Switching/Routing :: 3560 Switch With LAN QoS

Jun 5, 2012

I have issue with 3560 switch QoS configuration . I checked in cisco site about mentioned model QoS configuration.once we mark the frame and map the CoS to DSCP and once it enters into switch and it processes  according to LAN QoS configured on interface
 
we have configured  both the commands shape and share.
 
once it leaves the switch and enters into Edge router and if we do not have configured QoS in router which is normally MQC  , how does it process each packet ?Do we need to have end to end QoS configured in LAN ?

View 5 Replies View Related

Cisco Switching/Routing :: Cat 3560 No Switchport Command Test Out Routing With Switch

Dec 8, 2011

The last few days I've been exploring options in getting rid of some old routers accross a wan connections.  I have a cat 3560 to play with and I thought I would try and use the no switchport command test out routing with switch.  I've got some type of route issue and I tried a few things which I thought would fix the issue but had no effect.  I'll post the config and a few commands so you can see what the basic setup is. 

Here we can see in the arp that it knows about both 10.7.1.2 (PC unable to ping 10.3.3.254) as well as 10.3.3.254 (ASA).I tried adding in a ip route of 10.7.0.0 255.255.0.0 10.3.3.110 as well as 10.3.3.254.  Neither produced the results I wanted allowing 10.7.1.2 (PC) to ping the ASA (10.3.3.254). [code]

View 4 Replies View Related

Cisco Switching/Routing :: 3560 VLAN Routing Between Switch And Router

May 8, 2012

I have an environment of 3 X 3560G of which I have 1st switch-CORE(f0/10) connecting to the VPN router(CE) interface-f0/0. Remaining 2 Cisco 3560's(Access) are connected to Gi0/1 and Gi0/2 on the 1st switch-CORE via gi0/1 . On all three switches I have created multiple VLANs and assigned ports to these VLAN. The switch to switch connection is trunk allowing all VLANs created on all these 3 switches. Now the issue is how I am going to have all these VLANs routed through single interface on the routeri-e f0/0, as all these subnets will communicating to remote site over VPN. What should be default gateway on the 2 Access switches and the CORE switch, also what static route should be on router to reach all subnets(VLANs) created on these 3 switches.
 
I have read inter-VLAN routing i-e creating sub interfaces on router but dont want to proceed with that and looking for any other way to have my VLANs talk on all three switches and then are accessible to remote site ove VPN?

View 9 Replies View Related

Cisco Switching/Routing :: Routing Secondary Network On 3560 Switch

Jun 4, 2013

I am trying to get my workstation to talk to a workstation on a different sub-net through a Cisco 3560 switch.  The switch is running the following IOS version: [code]
 
My primary network is 172.16.0.0 and I am trying to connect to a device on a 192.168.111.0 sub-net. [code]
 
What would be the best way to get the two workstations talking via the switch?

View 3 Replies View Related

Cisco Switching/Routing :: How To Take Event Log Of Switch 3560

Feb 26, 2012

how to take the event log of Cisco switch 3560, its argent.

View 1 Replies View Related

Cisco Switching/Routing :: Implement QOS On 3560 Switch?

Nov 22, 2011

I have a 3560-48 switch running Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(44)SE3 and i need to implement basic QOS commands to the fast Ethernet interfaces as well as the gig  interfaces and Also I need to create port channels on the switch and need what the port channel syntax are as well for that particular IOS version? 
 
I have only read only access and i can't see what the QOS and Port channels syntax should be for that IOS version.

View 3 Replies View Related

Cisco Switching/Routing :: QOS Config On 3560 Switch

Jul 22, 2012

I'm in the process of configuring QOS on a 3560 routing switch in a GOLD, SILVER, BRONZE priority type scenario.
 
Firstly, I understand that this config will add a tag of "precedence 5" to a packet if it matches the "ACL_QOS_GOLD_In" access list. Question is does the router see this "precedence 5" tag and then sets the priority, or am I missing something in my config where at present it just sees the "precedence 5" and doesn’t act on it ?
 
Secondly, Since the "precedence 5" tag has already been added to the packets, do downstream routers see this tag and act accordingly or so I need to configure those is well ? [code]

View 2 Replies View Related

Cisco Switching/Routing :: Configure QoS On 3560 Switch?

Jun 7, 2012

configure QoS on 3560 switch i have taken the template from cisco configuration guide since we have different QoS configuration on each model.
 
below is the configuration :
  
configure terminal
mls qos
end                  
mls qos map cos-dscp 0 8 16 26 32 46 48 56
no mls qos srr-queue input cos-map                mls qos srr-queue input cos-map queue 1 threshold 2 1                mls qos srr-queue input cos-map queue 1 threshold 3 0    

[code]....
 
Currently all the cisco phones are connected to this switch and configuration with only one vlan that is voice vlan .
 
1) what is the outcome of this configuration , i mean, what will be the expected output ? end of the day we need to prioritize the voice traffic but why other commands including threshold and buffers are mentioned with respectives queues , if I need to explain that what am i expecting out of this configuration ?
 
2) this is LAN QoS which i understood but again , do i need to configure policy-map along with class-map which is MQC on this switch ?
 
3) i have edge router where i have MQC already configured but confusion with this switch which is working as a Access switch .

4) I referred the cisco QoS document for the respetive model whereas we have policy-map configured on the same switch with class-map .

My understanding is if we have configured the LAN QoS , and mapped the CoS value with DSCP , we need not to have MQC.

View 4 Replies View Related

Cisco Switching/Routing :: 3560 - IOS On Switch Model?

Nov 9, 2011

I am configuring some quotes for a customer whom I will be building a wireless network for.  The wireless network will support about 60 AP's, as well as some other wired drops.  The customer is working with a wireless vendor for the AP's, but I will be able to sell the switches for the network.
 
I want to ensure that he is pushing Gig and POE on each copper port for the AP's, since they will be "N" capable.  I have selected several 3560 models which are in 24 port models, and I also think i have a requirement which mandates a 48 port in another location.  What I have not been able to find in the Enterprise switch line is an 8 port which supports IOS and POE.
 
That being said, and since I am also "Select" certified, I went out to the SMB site, and did find that there were two models in the Small Business 300 line (models SG300-10P and SG300-10MP) which seem to support Gig ports as well as POE.  I looked over the specs for each one of the two respective models, and I was not able to find what the difference between each of these two are.  In other words, the specs, line by line, were identical.

View 6 Replies View Related

Cisco Switching/Routing :: QOS For 3560 Access Switch

Nov 28, 2011

we have a class based qos scheme (see attached file) on our 4500 series access switches and we have a access 3560-48 switch runing IOS  Version 12.2(44)SE3 my question is can I use the same QOS scheme for the 3560 switch?

View 3 Replies View Related

Cisco Switching/Routing :: 3560 - Switch With 1 VLAN Configuration?

Mar 18, 2013

I have a 3560 switch with 1 VLAN (VLAN 10) where I need to make ports:

1-10 as isolated (can't contact each other)
11-20 as community (need to contact each other like a normal VLAN)
23 as promiscuous (server that ports 1-20 need to get to)
24 as promiscuous (WAN router where ports 1-20 need to get to and the remote servers).

[Code]...

View 26 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved