Cisco VPN :: Setting Up 5505 VPN For Windows 7 Client

Feb 16, 2013

I have a client that has a 5505 installed. They want to VPN in with their Win7 laptop, but they don't want to shell out $1000 for the 10-pack Cisco VPN client.I have successfully setup the clientless VPN, and they can, through a browser, get to their files, but they'd like to map network drives so it's just like they're in the office.I tried setting the IP Sec up on the 5505, and then using  the built-in Win7 VPN network connection, but no go.I also do everything through the ASDM, but I realize some things cannot be done. I'd prefer to use the ASDM!Anyone else get this configured? 99% of what I see out here is how to connect the 5505 for site-to-site VPN.

View 4 Replies


Cisco VPN :: Remote IPSec VPN - Windows 7 Client And ASA 5505?

Dec 20, 2011

I have difficulties with configuring Remote IPSec VPN with Cisco ASA 5505 and Windows 7 native VPN client. My client PC gets VPN pool IP address, and can access remote network behind ASA, but then I lose my internet connectivity. I have read that this should be an issue with split tunneling, but I did as it is told here and no luck.On Windows VPN Client settings, if I uncheck "use default gateway on remote network" I have internet connectivity (since client is using local gateway), but then, I cannot ping remote network.In log, I see this warnings of this type:Teardown TCP connection 256 for outside: to outside: duration 0:00:00 bytes 0 Flow is a loopback (cisco)I have attached my configuration file (without split-tunneling configuration I tried). If you need additional logs I'll send them right away.

View 4 Replies View Related

Cisco VPN :: Authentication Error 5505 8.3 Setup Client Vpn To Windows

Nov 6, 2011

I'm trying to set up a 5505 (running 8.3) so that i can use the client vpn through RADIUS authentication.I have set up a new local RAIDUS windows box and used the ASDM asistant and a few other guides to setup the 5505.

View 3 Replies View Related

Cisco VPN :: EasyVPN Software Client Should Connect To Client ASA 5505?

Mar 20, 2012

i have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
EasyVPN Server Network extension mode to Client EasyVPN ASA This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a pool. This works fine. But how am i able to connect to the network from this client?

View 5 Replies View Related

Cisco Routers :: Setting Up Static IP For Client Rv220W

Dec 16, 2011

Initial setup with RV220W completed without difficulty,Need to set up static IP for one of the machines in the LAN (not static IP for WAN),I presume I use the static DHCP option, which allows me to select a particular IP for the machine I select based on it's MAC,1. My confusion stems from the manual stating that "the IP address that you pick should be outside the DHCP address range specified on the Networking> LAN(local network)>IPV4(local network)page".,Does that mean that the range on the IPV4 local network page should be modified to exclude the IP address that I want to use for the static IP..e.g. change the range from 1-255 to 1-200 and then use an IP of XXX.XXX.X.201 for instanceor does that mean that as soon as I choose an IP on the Static DHCP page, that if will reserved for use only on that machine and not used for another machine on the LAN, without me having to do something else to exclude it's use (i.e. does reserving a static IP automatically remove it from the range of IPs available to other machines)If I simply set a static IP on the local machine by going to "change network adapter" settings, what's the liklihood that the router might use the same IP on another machine.

View 2 Replies View Related

Cisco Wireless :: 5508 - Setting Client Count Per WLAN And AP Radio

Mar 14, 2013

We use WLC 5508 with 7.4. We tried to set max allowed clients per AP radio to 30 through GUI. We have APs with 80 clients associeted though.
When entering config wlan max-associated-clients max-clients wlan-id we got 
"WLAN/Guest-Lan/remote-lan is enabled. disable to configure max associated clients."
GUI doesn't show that message, should it?  In GUI, Is it necesary to disable WLAN before too?

View 3 Replies View Related

Cisco Firewall :: Setting Up DMZ On ASA 5505?

Nov 14, 2011

I am trying to set up a DMZ on my Cisco ASA 5505, so that the wireless clients are connected behind the DMZ, the LAN clients are connected behind the inside interface and both groups of clients can get to the Internet.  I have been able to configure the ASA for both wireless and LAN, but the wireless clients still cannot get to the Internet.  The LAN clients can get to the Internet.  I do not want the wireless clients and the LAN clients to be able to be able to communicate with each other. What commands do I need to run in order to allow the wireless clients to access the Internet? 

View 11 Replies View Related

Cisco :: ASA 5505 - Setting A VPN Connection

Apr 4, 2011

I am wondering if this Cisco ASA 5505 Box is overkill for what I need?I have just become network admin to a small office that host two domains.


Some of the clients are requesting a connection to the office from remote locations for file access and what not. So would implementing a Cisco ASA 5505 be overkill? I am a bit nervous of going forward as I have never had to "setup" an ASA box and dont want to kill the network.If I should NOT use this box, what should I use for a VPN connection?

View 6 Replies View Related

Cisco WAN :: Setting Up Routes On ASA 5505?

Dec 12, 2012

I'm trying to set up a Cisco ASA 5505. I'm mainly setting things up through ASDM but I also have console access. Right now while I'm setting it up I have the outside/Vlan2 port attached to my existing network and a laptop connected to the inside/Vlan1 port. More info about that:
interface Vlan1
nameif inside
security-level 100


Before I added that last "" entry, the ASA would not see anything on the internet. Now I can ping any external IP address from the router's console. However, the laptop I have connected to the 'inside' port still cannot reach any IP address outside the network. Every time I try to add a similar route for the 'inside' interface, I get the following error: "You have another route configured for this network any which has same gateway and same metric 1. You cannot add a duplicate route." I know I'm misunderstanding something here. In order to make devices connected to the 'inside' port connect to the internet, I need to set up a new route that will direct these devices to, right?

View 9 Replies View Related

Cisco WAN :: Setting Up ASA 5505 Behind 5510?

Aug 14, 2011

My company has leased some office space to an outside company that handed me a 5505 and said "We want to VPN to our HQ through your Internet". I have two issues: I need this to work and I need to be able to access the 5505 from the management network. I don't care about the VPN aspect as much as making sure that I have basic communication down. I have everything configured per the diagram, but I can't ping the 5505 outside (Vlan 2) interface. I want to be able to configure and test the VPN setup on the 5505 from Putty on my PC.
The default route on the 5520 sends traffic to and the default route on the 5510 sends traffic to the WAN interface. I added this route on the 5510:
I still can't ping the default gateway on the 5505. There is a switch between my PC and the 5520 but the default route passes the traffic to the 5520. However on my tracert I don't even get to the 5520. What's going on here? Do I have to add a route to the switch just to manage the ASA 5505?

View 30 Replies View Related

Setting Up ASA 5505 - Dual WAN

Oct 18, 2011

I have a ASA 5500 with Sec+ ?Is it possible to have Dual WAN, one WAN is used for default traffic and WAN2 would be strictly for VPN tunnels?

View 4 Replies View Related

Cisco VPN :: 5505 / VPN Client For ASA?

Nov 17, 2012

We have a Cisco 5505 firewall and working to setup VPN through the firewall, what Cisco vpn client should we download for our users to have the right client on their desktop/latops.

View 3 Replies View Related

Cisco Firewall :: Setting Up Port Forwarding ASA 5505

Mar 15, 2012

We are trying to setup our ASA 5505 to do port forwarding to multiple internal servers and have run into some issues. A little background on what we are trying to do.
We have 1 static external IP. Internally we have one exsisting server ( that has port 80 forwarded to it and another exsisting server ( that has port 443 forwarded to it. Both of these servers are serving seperate web apps to our employees who of course use them offsite. We have now added an additional server ( that needs to use both ports 80 and 443. Is there any way to set it up so that these ports can be forwarded to all the servers that need them? Also, how would this work as far knowing what traffic will need to go to which server even though it is using the same port?
The equipment is: ASA 5505ASA Version 7.2(4)ASDM Version 5.2(4)   I appologize in advance if what I'm trying to do is difficult/impossible. I inherted the ASA 5505 at this location and I was not here when it was initially installed. In fact no one on staff was here when it was initially installed. I did manage to find the passwords to it though. I'm not at all familiar with the ASA 5505 or Cisco secuirty appliances in general.

View 19 Replies View Related

Cisco Firewall :: ASA 5505 - Setting Up 2 LAN Networks And 2 WAN Connections?

May 16, 2013

I have an ASA 5505 with Security Bundle license.
I am able to create 2 LAN networks ( and Vlan1 and Vlan12 respectively. I also setup 2 outside interfaces (outside1 and outside2).
Network 1 ( - VLAN1) has no issues going out via Outside1, however I can't get Network 2 ( - VLAN 12) to go thru outside2.
I put in a static route (route outside x.x.x.x), the x.x.x.x is the default gateway of my ISP.                  

View 7 Replies View Related

Cisco Firewall :: Setting Up New ASA 5505 Into Existing Network?

Mar 21, 2013

I am having a problem trying to figure out how to add a new ASA 5505 to an existing network.  My current network is:Cable Modem  >  Linksys  >  48 port switch With multiple hosts residing on the 192.168.0.x network.Now i know that the ASA comes default with on the inside interface and i want to change that to  I have tried to do this thru ASDM using the wizard and manually.  Once i hit ok for it to write the config, it gives me an error that it didnt take.  I then lose connection to the ASA and have to hard boot it to get it back.I am trying to do this without my external connection connected and i have a laptop connected to the ASA on port 0/2 with an IP address of i need to connect my internet connection to it first and then run the wizard?  I was hoping to get it configured for my existing network before i plugged in the internet connection to limit my downtime.This ASA came with 6.4.1 ASDM and 8.2 OS installed.  i was able to upgrade the ASDM to 7.X but when i go to update the OS to 9.1, i get an error that i am not registered to use cryptographic software.   Dont know where i need to register to get it?

View 4 Replies View Related

Cisco Firewall :: Setting A Boot Image On ASA 5505?

May 1, 2011

I have an ASA 5505 that I was updating from frimware 8.04 to 8.41. Anyway, I went through the update procedure half-asleep and accidentally deleted the boot image right after I installed it (I used the CLI and put in the command del asa8*.bin then just hit enter a bunch of times, which of course means I deleted the old firmware too).
So now whenever I power up the ASA, I get the "Could not find boot file" error. Is there a guide somewhere that tells me how can upload another boot image to the ASA and set the ASA to boot it from teh ROMMON prompt?

View 1 Replies View Related

Cisco VPN :: ASA 5505 - VPN Client LAN Access

Jan 3, 2012

There is a Cisco VPN client (running on Windows 7) and an ASA5505. The goals are client could use remote gateway on ASA for Skype and able to access the devices in ASA inside interface.

The Skype works well but I cannot access devices in the interface inside via VPN connection. Following is the config, how to correct NAT or VPN settings?
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password wDnglsHo3Tm87.tM encrypted
passwd 2KFQnbNIdI.2KYOU encrypted

View 3 Replies View Related

SSL VPN Client For IPhone With ASA 5505

Oct 29, 2011

I find it troubling that i would have to pay for additional licensing to use the mobile version of anyconnect.

Is there a third-party app that will allow a secure connection back to my house from my iPhone?

View 11 Replies View Related

Cisco Wireless :: Manually Assigning Channels And RRM Setting With WLC 5505

Mar 16, 2013

My wireless network consists mainly of approximately 1400 AP's 900 x 3602's, 500 x 3502's,The majority of these AP's especially the new ones have been manually optimised for channel and power settings. We paid an external surveyor to survey and optimise the AP's.   
We have a few 5505 WLC's and the channel assignment method is set to "Freeze" ,My question is, if someone invokes a channel update on a WLC, will the WLC override the original manual channel setting if the WLC thinks it should be changed?  And will the original setting be lost forever unless a restore is performed from the WLC Database?

View 5 Replies View Related

Cisco VPN :: ASA 5505 Crashes Due To DHCP Client

May 13, 2012

We recently upgraded our 5505s to 8.2(5) 26 and noticed that each will crash after a cerntain amount of time.  Some crash every 30 minutes other will crash every 4 to 8 hrs.  The only difference would be the user's home ISP and/or home router, if they have one.  They are configured with a dynamic dhcp IP address for the outside interface and the crash files starts with the following:When we downgrade back to 8.2(5) 13 the problem goes away. Any known bugs for this version?  I haven't been able to find anything yet. We do have one 5505 that does not have this issues.  The only thing that may be different is that it was never at 8.2(5) 13.  We had downgrade it from a 8.3 version.

View 2 Replies View Related

Cisco VPN :: Client Error Connecting To ASA 5505

Apr 12, 2011

I am unable to connect to the vpn I set up on my ASA 5505 using the Cisco VPN Client on a Windows machine. The log of the vpn client and the config of the ASA 5505 are below.
Cisco Systems VPN Client Version
Copyright (C) 1998-2009 Cisco Systems, Inc. All Rights Reserved.


View 2 Replies View Related

Cisco VPN :: ASA 5505 Anyconnect Client NATing

Feb 19, 2011

We have a RA Vpn split_tunnel setup in one of our locations which is working fine in all areas except for traffic destinged for one specific website using https.  This vendor only allows the HTTPS connections to them to come from certain outside IP addresses. ssentially it should work like this:RAVPN_client ( --> https request to vendor_ip (208.x.x.x) ---> ASA55XX --> NAT_to_outside_ip --> https request to vendor_ip (208.x.x.x) need to understand how you would go about NATing ONLY this specific https traffic from the RA VPN while not having to alter the setup otherwise. Internal hosts (aka behind the ASA physically) do not have any issue getting to this site, as its nat'd to the outside ip address as we expect.Here is what we are using for the NAT Exemption list he 10.2.2.x, 192.168.100.x and 172.23.2.x are other remote sites that we have. RA VPN users are using the do not have any issues connecting to them, no matter the protocol.

View 3 Replies View Related

Cisco VPN :: Client Behind EzVPN Remote (ASA 5505)?

Feb 2, 2012

I try to configure a simple EzVPN infrastructure:
EzVPN Server (CISCO2811, hostname cme) < -- > EzVPN Remote (ASA5505, hostname ezvpn-asa) < -- > Client
Attached you find both configuration of the EzVPN server and remote. The tunnel is getting up and if I ping from the ASA to the Router, I see the packets getting encrypted:
ezvpn-asa# ping
ezvpn-asa# show crypto ipsec sa
interface: outside
Crypto map tag: _vpnc_cm, seq num: 10, local addr:

If I connect a client with IP address to the interface eth0/1 and do a ping to the cme, I don't see any packets getting encrypted. I don't have any idea about VPN, I just need it for a wireless lab environment. What do I have to configure on the ASA, so the inside traffic is encrypted?

View 2 Replies View Related

Cisco VPN :: ASA 5505 - Got Error When Trying To Connect VPN Client

Oct 19, 2009

I get the following error when trying to connect a vpn client through an ASA5505 with an already configured ipsec AES/256 site to site connection:

regular translation creation failed for protocol 50 src:inside:

The site to site addressing is not relevant, I'm not trying to pass traffic over the site-to-site, but rather create a new vpn from inside client to outside external vpn box that's not under my control. The client is able to create a connection, but no traffic is passed, when I try to ping / rdp, the above message is returned to me. If I add the rule static(inside, outside) interface netmask then it works, everything works, but ONLY from this computer.

Been Google for hours, but with no result as of yet.

View 6 Replies View Related

Cisco VPN :: ASA 5505 EasyVPN Client And Peers

Jul 11, 2011

I have a Cisco ASA 5505 which is setup as an EasyVPN client to e remote VPN concentrator.
The Cisco ASA has the 50 internal user license with 10 VPN peers.
We just upgraded the license from the base 10 internal user to 50 user license but it has not resolved the problem and only 10 internal users still work, the 11th fails.
Does each EasyVPN client on the inside network take up 1 of the 10 VPN peer licences?
This seems to be the issue from what I can see, just need confirmation.

View 1 Replies View Related

Cisco VPN :: ASA 5505 - VPN Client Will Not Access Remote Lan

Mar 10, 2013

I have an ASA 5505 that is on the perimeter of a hub & spoke vpn network, when I connect to this device using the VPN client I can connect to any device across the VPN infrastructure with the exception of the sub net that the client is connected to, for instance:
VPN client internal network connects to /24 and is issued that ip address, the VPN client can be pinged from another device in this network however the client cannot access anything on this sub net, all other sites can be accessed ie. main site, second site 192.168.110/24 and third site 192.168.112/24. The ACL Manager has a single entry of  "Source Destination and the "Standard ACL permit.

View 14 Replies View Related

Cisco VPN :: ASA 5505 / OSPF Redist Of SSL Client IPs?

May 2, 2011

I'm setting up our ASA 5505 for remote access VPN and now need to insert the VPN client addresses (allocated via RADIUS) into OSPF so that they get redistributed through our network.
The configuration of the ASA is that its hairpinning because it is behind an existing router/firewall (, therefore it only has an inside interface (plus one for management).
The VPN access works fine as long as I have a static route on our router/firewall pointing the VPN clients network range to the ASA.  But once I configure OSPF with a redistribute static (because VPN client addresses get added the the ASA as statics), a host route (which is fine) gets added to our firewall with a next hop of the router/firewall itself and not the ASA.
ieVPN Client route on the ASAS [1/0] via, inside (not to sure if this is expected behaviour - would have thought it should be a Connected route)
VPN Client route on the Router/Firewall    UGH         0     1246    em2       (I would have expected that OSPF should have put this in with a gateway of .200)
  Route in the ASA OSPF database192.168.242.75      839         0x80000002 0x9e45 0

View 3 Replies View Related

Cisco VPN :: ASA 5505 Does Each EasyVPN Client On Network Take Up 1 Of 10 Licenses

Mar 8, 2012

I have a Cisco ASA 5505 which is setup as an EasyVPN client to e remote VPN concentrator.The Cisco ASA has the 50 internal user license with 10 VPN peers.We just upgraded the license from the base 10 internal user to 50 user license but it has not resolved the problem and only 10 internal users still work, the 11th fails. Does each EasyVPN client on the inside network take up 1 of the 10 VPN peer licences? This seems to be the issue from what I can see, just need confirmation.

View 3 Replies View Related

Cisco Firewall :: 5505 VPN Client Unable To Connect

Feb 13, 2012

We have a cisco asa 5505 on which we have setup a group VPN. The VPN connections from all cisco vpn clients works fine except one. The keep getting the below error

"Secure VPN Connection terminated locally by the client. Reason 412: The remote peer is no longer responding. Connection Terminated".

Not sure why only one client won't be able to connect. The version we are using is 5.0.02 for VPN client.

View 10 Replies View Related

Cisco VPN :: Asa 5505 - Connect From IPad With IPSec Client

Jan 27, 2013

Got some issues when setting up IPSEC/VPN on the asa 5505. I want to connect from the ipad with the built in IPSec client..Get these errors when i run the debug crypto isakmp.

View 6 Replies View Related

Cisco Firewall :: 5505 - VPN Client Is Not Set To Auto Reconnect

May 6, 2013

I am working with a small off that has a 5505 acting as a basic firewall.  Behind it are off-the-shelf unmanaged switches.  Two users have to work with an outside vendor and are having issues.  They have a Sonicwall remote VPN client on each of their desktops and use this to connect to the vendor.  They then RDP into VMWare-based Windows 7 desktops at the vendor's site to do their work.  Randomly throughout the day (6-10 times per day) while they are actively working the RDP session will disconnect.  It will auto-reconnect after a few seconds.  The VPN log on the clients never show any issues.  I believe this is an RDP problem because while the RDP session is disconnecting, their VPN client is not (it is set to NOT auto-reconnect if it gets disconnected so that I will know for sure if it gets disconnected).  I don't see anything in the ASA's logs about denying connections involving their PCs and the remote VPN peer IP. 

View 7 Replies View Related

Cisco VPN :: Anyconnect Client Attempts Failing To ASA 5505

Apr 15, 2013

I already have traditional IPsec VPN access working just fine through this device.  Users connect and authenticate using a windows AD server for RADIUS and everything works great.  However, the customer wants to use AnyConnect instead of the traditional VPN client.  So I added a SSL connection profile (the anyconnect essentials feature is enabled on the device) and told it to use the same IP pool and RADIUS server group as the IPsec clients.  I used the ASDM wizard to configure it and had no issues completing the wizard. when trying to make a connection to the webvpn portal I get a 404 error instead of the client portal.  Also when trying to connect with the Anyconnect client, I get the usual "Untrusted VPN certificate" warning, but the connection attempt fails when I click through it.The strange part is when I look at the issued certificate in the browser or the client, it's showing me the certificate from the RADIUS server. Why is it looking there for certificate and more importantly, why does it care at all about a certificate when I've specified in the connection profile to use AAA to authenticate?

View 1 Replies View Related

Cisco Firewall :: Assign Same VPN Pool IP To Client / ASA 5505-v8.4(2)

Sep 16, 2011

Is there any way to always assign the same IP address to an AnyConnect VPN client logged into an ASA 5505 running v8.4?2

View 2 Replies View Related

Copyrights 2005-15, All rights reserved