Cisco WAN :: Upgrade IOS For C2960 And Switch Does Not Boot From New Image

Dec 29, 2011

I upgrade the IOS for switch c2960 and the switch do not boot from the new image.See the files attached.
 
show version
show boot
show flash
 
There is a mistake with settings?

View 3 Replies


ADVERTISEMENT

Cisco WAN :: C2960 Boot Image After Ios Upgrade

Dec 30, 2011

i upgrade the IOS for switch c2960 and the swtich do not boot from the new image.

-show version
-show boot
-show flash

View 6 Replies View Related

Cisco Switching/Routing :: 7206VXR Boot Loader Image Upgrade

Jan 22, 2008

I am planning to upgrade BootLoader image of 7206VXR router due to booting issue. The router is not booting .But if I go to rommon and give boot it will boot.So I am upgarding my Boot Loader image. Now the Bootloader image and IOS image are exactly same.Can I upgarde the Bootloader image to latest version without upgarding IOS?

View 3 Replies View Related

Cisco Switching/Routing :: Boot 4503-E Switch From Secondary Image?

Sep 13, 2011

We have Cisco 4503-E switch and software version is cat4500e-universal.SPA.03.01.01.SG.150-1.xo1.bin. Now i have uploaded cat4500e-universal.SPA.03.02.01.SG.150-2.SG1.bin IOS-XE software in the switch and want to boot the switch from this image.

View 17 Replies View Related

Cisco Switching/Routing :: Upgrade The Firmware In C2960 Switch To 15(1) SE2?

Feb 14, 2012

i am trying to upgrade the firmware in my C2960 switch to 15(1) SE2, and i get the error:Failed to execute the command archive download -sw /overwrite /http iosFile

View 2 Replies View Related

Cisco Switching/Routing :: Upgrade TAR IOS Image In 3560 Switch?

Oct 31, 2012

I wanted to upload image having .tar extension in Cisco 3560 switch. What are the steps to upload.

View 1 Replies View Related

Cisco Switching/Routing :: Upgrade WS 2960 24 TC-L Switch With IOS Image

Jan 8, 2013

I am trying to upgrade my cisco WS 2960 24 TC-L switch with the IOS image c2960-lanbasek9-mz.122-55.SE6.bin and my existing IOS image is c2960-lanbasek9-mz.122-50.SE5.bin. when i  am copying it to flash, it is getting copied but when i tried to boot it after entering command boot system c2960-lanbasek9-mz.122-55.SE6.bin , it gave me an error.
 
both flash dir and error are attahced herewith.

View 14 Replies View Related

Cisco WAN :: Boot Image Failover On 881G?

Apr 29, 2012

We deploy 881G routers at our store locations and are planning to upgrade the IOS to 15.2.2.  One concern we have is if the router fails to boot to the new image.  Is there a way to configure a second boot image as a failover in case the primary boot image does not load?  Our current DR plan is to have a laptop on site that we can connect to remotely and setup a console session to manually change the boot file.  This can be cumbersome and time consuming, so I'm wondering if the 881 has the ability to have another file loaded if the boot fails.

View 4 Replies View Related

Cisco WAN :: 2621XM Router Will Not Boot From IOS Image

Nov 27, 2011

I've got a 2621XM that has not been used for a while.Completely stripped of any modules and configuration files, the router will continually cycle the startup process without actually booting from the IOS.
 
The cycle displays the following :
 
System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Copyright (c) 2003 by cisco Systems, Inc.
 
program load complete, entry point: 0x80008000, size: 0x10034ec
 
What I've tried:
 
1) Downloading another IOS image (c2600-is-mz.123-20.bin) via Xmodem and running "confreg 0x2102" from the rommon. All that did is change the last message to "program load complete, entry point: 0x80008000, size: 0x10fa95c"
 
 2) Running the command "boot flash:c2600-is-mz.123-20.bin". If I enable the diagnostics via rommon, the cycle expands to:
  
System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Copyright (c) 2003 by cisco Systems, Inc.
 program load complete, entry point: 0x80008000, size: 0x10fa95c
 Testing lower main memory - data equals address
Testing lower main memory - checkerboard

[code]....
 
If it wasn't for the lack of error messages, I would assume it was a hardware issue.If the image was corrupted, I would expect a message indicating that the image couldn't be read.

View 1 Replies View Related

Cisco Firewall :: Setting A Boot Image On ASA 5505?

May 1, 2011

I have an ASA 5505 that I was updating from frimware 8.04 to 8.41. Anyway, I went through the update procedure half-asleep and accidentally deleted the boot image right after I installed it (I used the CLI and put in the command del asa8*.bin then just hit enter a bunch of times, which of course means I deleted the old firmware too).
 
So now whenever I power up the ASA, I get the "Could not find boot file" error. Is there a guide somewhere that tells me how can upload another boot image to the ASA and set the ASA to boot it from teh ROMMON prompt?

View 1 Replies View Related

Cisco WAN :: 7204 VXR - Valid Image On Boot Flash

Oct 24, 2012

I have a Cisco 7204 vxr router that does not have a valid image on the boot flash or on the pcmcia card (disk 2).  I tried everything i could to try and get the router to recognize the flash but it keeps giving me a magic card error.  I'm losing my mind slowly but surely. 

The router boots into Rommon every time and the Rommon options for this router are horrible.  No tftpdnld option.  Can I get this router to boot from tftp, from Rommon?

View 1 Replies View Related

Cisco Switching/Routing :: 6503 E Series Boot Image

Dec 14, 2012

I have a cisco 6503 - e series switch which runs c6sup22-psv-mz.121-26.E4.bin. Both superviser engine and MSFC2 card run the same IOS image i guess. In my boot flash their is another image c6msfc2-jsv-mz.121-4.E1. o what is the difference between these images c6msfc2-jsv-mz.121-4.E1 and  c6msfc-boot-mz.121-4.E1.

View 5 Replies View Related

Cisco Wireless :: New AIR-LAP1142N-A-K9 Insufficient Memory To Boot Image

Nov 1, 2011

I just pulled the AP out of the box and haven't received support contracts yet.  I connected the AP to the LAN and added it to my 4402 controller (version 5.2.178.0) with no problems.  Once I set it the mode to H-REAP and it rebooted, it went loopy.  Actually, it boots up, shows a bunch of debug info, then reboots.  The console output is below.  I've tried reimaging (image c1140-rcvk9w8-tar.124-21a.JA2.tar) but still have the same problem.  I checked and although the controller software is old, the AP is supported. 
 
Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(18a)JA1, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2009 by Cisco Systems, Inc.

[Code]....

View 7 Replies View Related

Cisco WAN :: 6509 System Image File Is Sup Boot-disk

May 27, 2013

i recently bought a new Supervisor Engine 720  WS-SUP720-3B and 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF. Once i fired it all up i got this error %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 2, power not allowed: Unknown Card Type. the System image file is "bootdisk:s72033-ipservicesk9_wan-mz.122-18.SXE6a.bin".

I have a 6509 up and running the same mods and working fine BUT the System image file is sup-bootdisk:s72033-ipservicesk9-mz.122-18.SXF7.bin. Is the boot image what is causing my isses?

View 1 Replies View Related

Cisco Switching/Routing :: IE3000 Sw Cannot Load Boot Image

May 13, 2013

I'm having difficult getting this switch to boot from flash. I do not understand why it is trying to load "b1" from "bs1" instead of something from flash. [code]

View 2 Replies View Related

Cisco Switching/Routing :: 2960S Boot Loader And IOS Image

May 18, 2013

after upgrading IOS image to V15 on four 2960S switches: Should I make the boot loader image to match the IOS version?I never thought about this while upgrading IOS image unless there is boot issue. I googled for answer but no luck there...
 
I checked download section on Cisco.com for C2960S-48FPS-L switch and there is simply no boot loader image..The running boot loader is C2960S-HBOOT-M Version 12.2(55r)SEThe running IOS is: 15.0 (2) SE2.

View 7 Replies View Related

Routers / Switches :: Need To Add Drivers To Wds Boot Image On 2003R2?

Jan 25, 2013

How do I add network drivers to a wds boot image on 2003R2. I see that 2008 has the add driver option but that doesn't exist in 2003r2.

View 1 Replies View Related

Cisco Infrastructure :: Can 1841 Router Boot From System Image From USB Disk

Jan 12, 2013

I have a cisco1841 router with 32M CF card installed.Now , i want boot a system image larger 32M from usbdisk.First  i insert the 128M usb flash disk to the 1841 router and format it, then i can see the device from dir command.Second copy the larger ios image from tftp to the usb disk and successed,i can see the image with " dir usbflash0:" command.Third  i use this command "boot system " ,but there is no selection of  "usbflash0: " Does the cisco 1841 router  boot the system image from usb disk when reboot the router.

View 2 Replies View Related

Cisco WAN :: 2801 Unable To Boot Image Wrong System Software

Feb 28, 2011

128 compact flash got corrupted and suddenly not working after i reboot the 2801 router. now i have a new 256 compact flash and 512 compact flash but i cannot still to boot the 2801 properly.  it always do looping like booting in rommon and  will be the image decompress but in the end theres an error, Wrong system software for this hardware.  ive tried different ios but still the same.
 
System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 2004 by cisco Systems, Inc.PLD version 0x10GIO ASIC version 0x127c2801 processor with 262144 Kbytes of main memoryMain memory is configured to 64 bit mode with parity disabled
 
Readonly ROMMON initializedprogram load complete, entry point: 0x8000f000, size: 0xc100
 
Initializing ATA monitor library.......program load complete, entry point: 0x8000f000, size: 0xc100
 
Initializing ATA monitor library.......
 
program load complete, entry point: 0x8000f000, size: 0x2fae3d4Self decompressing the image : ##################################################################################################################################################################################[Code]....

View 1 Replies View Related

Cisco Wireless :: 6513 - How To Access Memory On WISM To Delete Old Boot Image

Sep 22, 2012

I'm trying to upload a new software image (~86mb) from my PC to the WiSM2 controller on a 6513 chassis.

Midway through the transfer, the transfer stopped and I got this error on the log:

*TransferTask: Jan 01 00:28:33.124: %UPDATE-3-FTP_TRANSFER_FAIL: updcode.c:4508 Error FTP file Transfer [ftp_get], <28>, No space left on device.
 
How to access the memory on the wism to delete the old boot image?

View 1 Replies View Related

Cisco Switching/Routing :: How To Upgrade C2960-24TT-L

Jan 29, 2012

I am having problem in upgrading Cat2960 because I deleted the flash in this switch already and now I need installing an IOS image? [code]

View 1 Replies View Related

Cisco Switching/Routing :: Nexus 5010 Won't Load System Image - Stuck At Boot Prompt

Sep 29, 2012

I have a 5010 that simply won't load any system image.  Loads the kickstart image just fine, but once at the Switch(boot)# prompt just give me garbage when I enter "load bootflash:n5000-uk9.5.1.3.N2.1b.bin Restarting system.
 
Loader Version pr-1.3
loader> dirbootflash:  lost+found  n5000-uk9-kickstart.5.2.1.N1.1b.bin  n5000-uk9.5.2.1.N1.1b.bin  n5000-uk9-kickstart.5.1.3.N2.1b.bin  n5000-uk9.5.1.3.N2.1b.bin

[Code]....

View 1 Replies View Related

Cisco Switching/Routing :: C2960 / Firmware Error After Upgrade - Cannot Get To ROMmon

Aug 14, 2012

Yesterday I tried to install c2960-lanbasek9.mz.12.55.SE4.bin onto my router.  When I changed the boot commands, I did not leave the 2nd option in there and the old firmware has an .ex3 extension.  After trying to boot to this new image, we receive a looping error message that continues to reboot and go through the same process.Basically the error is  "ERROR: firmware not supported by hardware"I have power cycled it a few times but durning bootup, I never see the ################## which would allow me to BREAK sequence and get into rommon.  The device simply waits about 30-40 seconds after boot and goes right back to the looping reboot sequence and the error message.  Is there any hyper term or putty settings to change on this?

View 1 Replies View Related

Cisco :: WS-C2960-24PC-S - How To Know Detail P/N On Switch

Oct 5, 2011

I would like to ask you that how can i know detail P/N on switch WS-C2960-24PC-S I want to know detail  what is PC-S and some swith LC-S

View 2 Replies View Related

Cisco WAN :: Sw Down Every Night / WS-C2960-24TC-L Switch

Sep 19, 2012

I'm having problems with a cisco switch WS-C2960-24TC-L version 12.2 (50) SE5. every night the equipment goes down, and every morning around 8am comes up.

I know it comes up at 8am because at that time I arrive at my workplace and see the alarm that the switch did not backup the config. ip using his web page and see what's up for a few minutes.
 
but I never could discover what time vai below. is there any way to see?? with the command show logging don't appear the hoursthat came down...he was only following the hours that he came up ...

View 4 Replies View Related

Cisco :: Difference Between C2960-lanbasek9-mz.122-44.SE1.bin With C2960-lanbase-mz.122-44.SE1.bin

Oct 27, 2011

what is difference btw c2960-lanbasek9-mz.122-44.SE1.bin with c2960-lanbase-mz.122-44.SE1.bin.I found that these two IOS are available in below link and both two are released in same time... [URL]

View 2 Replies View Related

Cisco WAN :: 2948 Switch Configuration To WS C2960 48TC-S

Feb 26, 2013

I have a 3com 2948 switch and is needing to put the configuration on a Cisco WS C2960 48 port switch. I am attaching the config to heck if that is correct. I know my IP will need to change to .123

View 7 Replies View Related

Cisco Switching/Routing :: C2960 Switch Post Failure

Apr 23, 2013

I have a C2960-24TT-L Switch with the following problem:When the Power Cord is plugged in the Switch, all switch indicator LEDs go on very briefly. Then SYST LED blinks very briefly, goes on steady and remains at this state without any indication at the console.Tried the reset by holding the MODE button while plugging in power but I still get no indication at the console. All is fine with console, meaning that if I take out the cable and plug it in another switch, then I see all that there is there to be seen.My question: Is the switch beyond repair or is there something that can be done to get the switch to run POST and boot at rommon so that I can reload SW and configs?

View 3 Replies View Related

Cisco Switching/Routing :: SSH Access To Trunked Switch C2960

Feb 7, 2012

I've got a C2960 (sw01) and a C2948. (sw02) The sw02 switch is trunked with sw01, and is meant to serve as an extension to the VLANs (1-4) that exist on sw01. It is trunking properly, however, how would I go about giving the sw02 an IP so that I can access it via SSH? Would I have to create a VLAN specifically on sw02 with an ip and switchport an interface to use it? I know that a VLAN can only have a single IP, but I'd like sw02 to have an IP on VLAN1 (192.168.1.0 subnet), is that possible?

View 5 Replies View Related

Cisco Wireless :: C2960 / Trunk Between Switch And AP Doesn't Work

May 12, 2013

It looks like pretty basic config, but it does not work. I have 1x 2602i autonomous mode AP, 1x C2960 switch (with inter-vlan routing prefered SDM template) and 1x 1841 router.
 
I trunk between Switch and Router works smoothly, but it does not work between AP and Switch or AP and Router.
 
Configuration looks like this:
 
AP2602i:
 interface GigabitEthernet0
no ip address
duplex full
speed 100

[code]....

View 12 Replies View Related

Cisco WAN :: Unable To Take Backup Of Switch C2960 Using Copy Flash - Tftp

Jul 27, 2011

I m unable to take backup of Switch c2960 using
 
#Copy flash: tftp
  
while i m taking it show some error
 
t#copy flash: tftp:
Source filename []? c2960-lanbasek9-mz.122-44.SE6
Address or name of remote host []? 10.23.120.15
Destination file name [c2960-lanbasek9-mz.122-44.SE6]?
%Error reading flash:c2960-lanbasek9-mz.122-44.SE6(Is a directory)
 
sh flash:
 
Directory of flash:/
 
    2  -rwx        1919   Mar 1 1993 10:27:17 +05:30  private-config.text
    3  -rwx       11056   Mar 1 1993 10:27:17 +05:30  config.text
    4  -rwx         804   Mar 1 1993 05:30:42 +05:30  vlan.dat
    6  -rwx        2072   Mar 1 1993 10:27:17 +05:30  multiple-fs
    7  drwx         192   Mar 1 1993 05:37:02 +05:30  c2960-lanbasek9-mz.122-44.
SE6

View 1 Replies View Related

Cisco Switching/Routing :: Are VLANs On WS-C2960-24PC-L And Switch SG300

Feb 20, 2013

Is it possible to configure both Catalyst WS-C2960-24PC-L and Switch Cisco SG300-28 to work together for VLANs for voice and data ? If yes, can you give me the resources which I can refer to ?

View 4 Replies View Related

Cisco Firewall :: Upgrade Pix 525 Boot Rom From 4.0 To 4.3?

Feb 22, 2012

how to upgrade a Cisco Pix 525 boot rom from 4.0 to 4.3. Is it a physical chip or software upgrade? Is it needed to upgrade to latest IOS on Cisco Pix 525 to 8.0. Where can I find more information on it? 

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved