Cisco Wireless :: Aironet 1260 Series - Sending Station Has Left BSS

Oct 29, 2012

We have been having issues with random packet drops and or some sort of radio lockup which happens a few times a day. I have a test AP setup with a few clients only a few feet away and I see this combination of messages. Should I be seeing these clients drop off and then reconnect immediately? Granted these test clients are not passing much data but my assumption is that they would not become deauthenticated because of lack of activity? This setup is using a radius server for authentication. I tested it before with just WPA2 PSK and only had a few disconnected over a number of days, compared with many a day with the Radius.

View 1 Replies


Cisco Wireless :: Aironet 1100 Disassociated Because Sending Station Is Leaving

Oct 9, 2012

We have 5 Cisco Aironet 1100 wireless access points and we are having huge problems in the last few days with them disconnecting some mobile barcode scanners that we have.
We have two Aironet's in the top of the factory which work fine and 3 down the bottom which keep kicking the barcode scanners off.  If we use the barcode scanners at the top of the factory they work fine, as soon as we come down to the other 3 WAPs it they keep connecting and disconnecting.
We get the following error in the Event log on the access points.Disassociated because sending station is leaving (or has left) BSS On the barcode scanners. [code]

View 1 Replies View Related

Cisco Wireless :: How To Setup A Standalone Aironet AP 1260 Series

Sep 13, 2011

I'm new to the Cisco Aironet Access Point. I got a new STANDALONE Aironet 1260 series access point device. The part # AIR-AP1262N-A-K9. The shipping package did not come with any guide, CD, and power adapter. I searched the Cisco sites, but could not find appropriate manuals. I did find a getting started guide but not for standalone AP, it's for Controller-based AP. Question - where can I find manuals / guides to set up and configure my new standalone Cisco Aironet Access Point 1260?

View 3 Replies View Related

Cisco Wireless :: Aironet 1260 Series MAC Filtering In Autonomous Mode

May 13, 2013

Do we have Option to add MAC address of specific laptop or Mobile to connect to the Access Point in cisco Aironet AP 1260 series in Autonmous mode

View 4 Replies View Related

Cisco Wireless :: 1140 AP Series Vs 1260 AP Series Technical Differences

Jul 24, 2012

What's the main technical differences among the 1140 AP series and the 1260 AP series?I know that the 1260 supports external antennas while the 1140 supports internal antennas, but apart from that, is there any other important difference ?

View 10 Replies View Related

Cisco Wireless :: Aironet 1260 As Bridges?

Feb 2, 2012

Is it possible to create a wireless site to site link using 1260 access points as bridges (like the 1300 series)?
Also if so, can you use 11n channel bonding on the bridge link?
I need to link 2 buildings together wirelessly approximately 70 metres apart.  There is direct line of sight between them.

View 10 Replies View Related

Cisco Wireless :: Aironet 1260 Access Point Work Without Controller??

Dec 1, 2010

I would like to buy Cisco  Aironet 1260 Access Points, i just want to use them independantly so   i want to know do they work without the Wireless LAN Controller? or i  have to have the controller for them to work? they will be in different locations so i cant have a controller per each location.

View 9 Replies View Related

Cisco Wireless :: Is Aironet 1260 Good For Indoor LWAP Or CAPWAP Environment

Jul 12, 2012

Is Aironet 1260 good for indoor LWAP or CAPWAP environment? Do we need external antenna for the Aironet 1260 access point when using it indoor?

View 1 Replies View Related

Cisco Wireless :: Controller 4400 Series Work With Aironet 3600 Series

Mar 6, 2012

Can Controller 4400 series work with Aironet 3600 series?

View 5 Replies View Related

Cisco :: Aironet 1260 WDS Setup?

Jan 23, 2013

I was wondering if its possible to setup the Cisco Aironet 1260 as a WDS master with radius and another Cisco Aironet 1260 as a slave for seamless roaming. How many slaves can a WDS master handle?

View 1 Replies View Related

Cisco AAA/Identity/Nac :: AIRONET 1260 With New Radius ACS 4.x?

Nov 18, 2012

I have CISCO ACS 5.1 radius for VPN on ASA and tried to configure an NDG on it for AIRONET 1260 too and worked fine with IEEE 802.1x CISCO EAP-FAST authentication As I had some trouble to let users to authenticate only on VPN if are VPN users and only on CISCO AIRONET if need only WIFI AIRONET I tried exception policies rules but something not working. VPN was ok but not WIFI access denied for rule policy access I decided to install CISCO ACS 4.x on Windows 2003 that is on ACS 5 DVD I created NDG as done on ACS 5 put a shared secret , put on AIRONET too as done for ACS 5 but I receive an error against ACS 4.x To troubleshout it I tried [URL] but not work ! I think to have done all fine owever on ACS 5 it worked in 5 minutes I searched log inside ACS 4 and found "Invalid message authenticator in EAP request" and I found this: [URL]Changed shared secret more times but ever not workign with ACS 4 I need to have user and password prompt on client trying to authentincate on AIRONET WIFI and I need ACS INTERNAL USER no active directory, no LDAP , no external user database?

View 1 Replies View Related

Cisco :: Aironet 1260 Authentication Server

Sep 13, 2012

I have 3 Aironet 1260's with the same SSID and set with Open Authentication with MAC Authentication. Can I designate one of the 1260's as the MAC Authentication Server? I have all 3 now working with MAC Address Authenticated ty Local List Only and have to put the new MAC address in all 3.

View 3 Replies View Related

Cisco :: Make SSID Hidden Aironet 1260?

Mar 28, 2013

We have three Access Points, two Cisco Aironet 1260 and one 1240AG. Originally, the SSID was hidden on all three AP's and users had to go to Other Networks and type in the SSID and password to access the WAN. About a few months ago, the network started broadcasting to the public. I am trying to make the SSID hidden again. I have tried going to the Security tab, choosing the  SSID Manager and setting single guest mode to none but it has not worked.

View 4 Replies View Related

Cisco Wireless :: Configure Aironet 1100 Series AP?

Apr 1, 2013

I have very little practical knowledge of routers, switches and AP's. I recently got a very old Cisco Aironet 1100 series AP which was working fine in one network. I reset it and tried configuring it in new network (uses DHCP to assign public IP) for school use. But not able to access internet.

View 3 Replies View Related

Cisco Wireless :: Setting Up Aironet 1600 Series

Jun 13, 2013

how to setup the Aironet 1602 (AIR-SAP1602I-E-K9) I have tried accessing it by various IPs like or but none of them work also when I monitor the connection using Wireshark I can't find out what its IP is.

View 4 Replies View Related

Cisco Wireless :: Aironet 600 Series Users Limitation

Aug 30, 2011

access point and the limitation on the users connected to the SSID using a wireless lan controller. From the installation guide I see an incredible thing:
Supported User Count Only fifteen users are allowed to connect on the WLAN Controller WLANs provided on the 600 series at any one time. A sixteenth user cannot authenticate until one of the first clients de-authenticates or a timeout occurred on the controller. Note: This number is cumulative across the controller WLANs on the 600 series. For example, if two controller WLANs are configured and there are fifteen users on one of the WLANs, no users will be able to join the other WLAN on the 600 series at that time. This limit does not apply to the local private WLANs that the end user configures on the 600 series designed for personal use and clients connected on these private WLANs or on the wired ports do not affect these limits.
Is it possible a terrible limitation like this ?

View 9 Replies View Related

Cisco Wireless :: Register Ap Aironet 1200 To WLC 5500 Series?

Nov 20, 2012

I have this version Ap "c1200-rcvk9w8-tar.124-21a.JA2" and a WLC 5500. When i connect the ap to the network i can ping from ap to wlc and the wlc to ap,  but the proccess of lwapp messages give errors on the Ap when the Ap try to download the image from wlc and could not join the wlc. why this could be? this is the info of the wireless lan controller.

View 6 Replies View Related

Cisco Wireless :: Aironet 2600 Series AP AIR-CAP2602E To Autonomous

Jan 27, 2013

I purchased the AP wrongly, instead of getting the "Standalone/Autonomous" (AIR-SAP2602E) version but I purchased the controller-based version (AIR-CAP2602E); my question is can I use "ap3g2-k9w7-tar.152-2.JB.tar" too flash it to a "Standalone/Autonomous" version?

View 21 Replies View Related

Cisco Wireless :: Aironet 1100 Series / IOS Upgrade For Access Points?

Sep 25, 2012

I have some Cisco Aironet 1100-series, 1040 series, 1240 series, 1130 series and 1200series and i would like to upgrade them to the newest ios software.
The IOS that are present in my access points are 12.3(8)AJ and 12.3(11)JX.

View 2 Replies View Related

Cisco Wireless :: Change IP Address Of Aironet 1200 Series Access Point

Dec 30, 2012

we have 6 access points in production and we want to chnage the IP addresses of them. So what would be the procedure for that.

View 17 Replies View Related

Cisco Wireless :: Aironet 1140 Series Units Won't Connect To Gigabit Switch

Mar 27, 2013

I just installed 2 new units and neither will connect to a new HP gigabit switch - no link light, other devices can connect to the switch OK.  Their gigabit ethernet settings are set to auto for duplex and speed.  I also tried forcing one of them to full duplex and 1000 Mbps which didn't work either.  They're both powered by POE injectors.  If I connect them to a 10/100 switch they work fine.

View 8 Replies View Related

Cisco :: Aironet 1300 Series Reset To Factory Default

Aug 16, 2011

I have a cisco aironet 1300 series and i need to reset it back to factory default.  the directions say push the mode button while the access point is off and then turn it on while the mode button is down.

View 1 Replies View Related

Cisco :: Setting Up Aironet 3500 Series Access Point

Nov 21, 2012

links with information / guidelines for the initial setup for this Access Point?

View 7 Replies View Related

Cisco :: Make Bridge Connection Between Aironet 1400 Series And R5005?

May 23, 2013

Can we make a bridge connection between cisco aironet 1400 series and cisco R5005? In Root and Non Root Manner.

View 1 Replies View Related

Cisco Application :: Make Bridge Connection Between Aironet 1400 Series And R5005?

May 23, 2013

can we make a bridge connection between cisco aironet 1400 series and cisco R5005?
In Root and Non Root Manner.

View 1 Replies View Related

Cisco Switching/Routing :: Why Boot Up Takes Long Time - Aironet 1200 Series

Nov 24, 2011

I have a Cisco Aironet 1200 Series Access Point. It takes long time to boot up.
After showing the warning banner message it takes long time before asking for username.
The sh version is given below.
Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(7)JA4, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2006 by Cisco Systems, Inc.Compiled Tue 05-Sep-06 14:15


View 3 Replies View Related

How To Enlarge The Icons On The Left

Aug 16, 2011

how do I enlarge the icons on the left ?

View 1 Replies View Related

Move Icon From Left Side To Right?

Sep 18, 2011

Move icon from left to right

View 1 Replies View Related

Cisco Wireless :: Current IOS For 1260 AP?

Jun 12, 2012

What is the most current version oF IOS for the following Wireless AP(Aironet 1260)
Product/Model Number:      AIR-AP1261N-E-K9
System Software Filename:     ap3g1-k9w7-tar.124

View 2 Replies View Related

Cisco Switching/Routing :: 3750E - Status Lights On Left Lit Up But No Ports On

Oct 16, 2011

I have installed and configured 2 new WS-3750E-24TD in the last 30 days, that have software version 12.5(50)SE2-universalk9, on our flat Development LAN  (currently 7 existing WS-3750E-24TD with 12.5(35)SE2-universal)The new switches have shutdown, 1 has shutdown twice and I just had the other one shutdown on the weekend, all the status lights on the left are lit up but no port lights are on, I am not able to console in to the switch all I can do is cycle power. I am planning on upgrading all switches to the latest software release  universalk9-mz.150-1SE
could this problem be a version incompatibillity between the switches?

View 8 Replies View Related

Cisco Wireless :: Antenna Separation For AP 1260?

Oct 24, 2012

We are installing 1260 Access Point (AIR-LAP1262N-E-K9) with 2 sets of external antenna:AIR-ANT2460NP-R (2.4Ghz, Patch Wall-mount, 6dBi Directional) & AIR-ANT5160NP-R (5Ghz, Patch Wall-mount, 6dBi Directional).What would be the recommended separation of the 2 antennas if they will be mounted beside each other?

View 1 Replies View Related

Cisco Wireless :: Upgrade IOS Image For 1260 AP?

Nov 3, 2012

i have cisco 1260 Access point with standalone ios  ap3g1-k9w7-tar.124-23c. i download new IOS to connect the AP to the controller the new ios is  ap3g1-k9w8-tar.124-23c.JA5.tar. upgrade th AP to LAP. is it just install ios like in router & switch by tftp?

View 1 Replies View Related

Cisco Wireless :: 1260 Can't Get IP Address And Can't Joint WLC

Nov 24, 2012

i have Cisco WLC 2504 & 1260 LAP.i connect the WLC to L3 switch & connect the LAP to another port in the same L3 switch.i configure DHCP on the same switch to provide ip for the LAP , but the LAP can't get an ip address and can't joint the controller.also if when i login to the LAP i can't enter the configuration mode.

View 6 Replies View Related

Copyrights 2005-15, All rights reserved