Linksys WRT54G - Garbled Router Web Administration Page

Mar 11, 2013

Sometimes, when I access my router's (Linksys WRT54G) web administration page, it comes out garbled; i.e. missing text, icons, links, form controls, etc.

Gets fixed after powering the router off then on again.

View 1 Replies


Linksys Wrt54g - How To Access Router Set Up Page

Oct 8, 2011

running linksys wrt54g wireless router to two towers and 1 laptop----had short power outage after which i lost connection to router only on one tower---other tower and laptop were unaffected----had green indicator lights for positions 1 and 2 hard wire connected towers before outage---now only position 2----looking for reasons why I lost number 1 and thus connectivity to the router----have tried powering down router etc---but have not reset it---looking for more info first

View 1 Replies View Related

Linksys WRT54G V3.1 - Cannot Access Set Up Page In Router

Sep 18, 2011

My wifi router, Linksys WRT54G v3.1 has been working fine till now. Suddenly my laptop stopped receiving wifi signal. I am unable to access the set up page via either from my laptop or from my desktop that is connected to the modem via the router. I reset the router as well but no luck.

View 5 Replies View Related

Cisco Wireless :: WAP54G Accessing Administration Page

Jun 28, 2012

I have an AP(Cisco Lynksis Wireless G WAP54G) with one port (LAN) on the back, i have tried several time accessing the administration page but in vain. I reseted the AP (holding the reset button within 10 secondes) and try again to access through my internet brower but still having the same issue on accessing the admin page. The main target is to access the admin page and configure settings in order to amplify my signal in some offices away.

View 7 Replies View Related

Linksys Wireless Router :: Cannot Access WRT54G Setup Page

Jan 19, 2013

I have a WRT54G router that I have not used for many years, but now I need to use it again. I have connected it between my modem and PC, and I am able to get an internet connection on the PC, but I am unable to connect to the router's configuration page. I have tried resetting the router numerous times (holding the reset button 5 seconds, 10 seconds, even longer) to reset the IP address to the default address, but still cannot access the page. The power LED is on and the WLAN and Internet LEDs are on, and the LED for the port my PC is connected to is on. The hardware version of the router is v3. I tried downloading the latest firmware, but without being anble to communicate with the router at the IP address I cannot update the firmware. How can I go about connectiong to the router's setup page? When using ipconfig, the Default Gateway appears to still point to my ISP's IP address instead of the router's.

View 9 Replies View Related

Linksys Wireless Router :: WRT54G Administrator Page Is Broken?

Sep 27, 2012

I recently "uninstalled" DD-WRT from my router and tried to install the actual firmware for the router, so I went to this page [URL] WRT54G and select version 5. My router is really version 5.1 but I read on this forum that this router works with version 5 so I downloaded it and installed it.
However, this is how my admin page looks like,
And I can't do anything at all. Is there a fix for this? Is there an actual version 5.1 firmware? Or must I switch to a different, proper router?

View 8 Replies View Related

Linksys Wireless Router :: WRT54G Page Has Reverted To Default

Feb 24, 2012

I have a Linxsys WRT54G.  Once every week or two, it seems to "forget" its name, and revert to the default name.  When I try to access it with my laptop or phone, "Multivac" is gone, and "Linxsys_XXXXXXX" (where XXXX are random numbers and letters) has taken its place.  When I go to the setup at, the "Router Name" on the first "Basic Setup" page is still "Multivac," but the "Network Name" on the second "Wireless" page has reverted to the default.  If I change it back to Multivac, everything is fine for a week or three until it "forgets" again.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - How To Access Setup Page

Apr 27, 2012

When I had DSL, my WRT54G was my DHCP master for my home network.  When I got AT&T U-Verse, their "gateway" became the DHCP master and also the wireless access point.  But the signal was not strong enough where I wanted to use it, so I hooked up the WRT54G again.  I discovered that if I connected the U-Verse gateway to the "Internet" port on the WRT54G Linksys, then my home network was split in two, which I did not want.  The WRT54G access point is physically somewhat distant from my wired computer, so I wanted to keep the U-Verse gateway as the DHCP master. (The U-Verse gateway is a router with four "computer" ports but no "Internet" port.)
I followed instructions on the Linksys web site, and using my wi-fi connected computer I re-programmed the WRT54G to be "Disabled" as a DHCP server.  Then I powered down and physically connected the U-Verse gateway to a "Computer" port on the WRT54G.  This solved my problem:  my distant wi-fi computer now has a good signal, and both computers "see" each other.
However, now I seem to have lost access to the WRT54G setup "web page."  Is it possible to access the innards of the WRT54G when its DHCP service is disabled?  Or would I have to reset the device to factory configuration and start all over if I wanted to make any tweaks?

View 3 Replies View Related

Cisco Wireless :: Cannot Access WLC 4404 Administration Page Using Https

Sep 27, 2010

We have recently upgraded the software on our two WLC 4404 from software release to to and lastly to version
We could access the WLC's GUI's using https when it was on version When we did the upgrades from version to we couldn't access the Admin page through https anymore but only through normal http. We enabled https through the GUI and through the CLI and we did do the re-generation certificate , without any success. We then upgraded to version and we still have the same result , cannot access Admin GUI through https.

View 2 Replies View Related

Linksys Wireless Router :: WRT54G - Put ASPX Page When Start Connection?

Sep 9, 2011

Is there a way to put the .EXE program in the start connection in Wireless Router WRT54G ?
or a .ASPX page when start the connection ? I want to do it:
I want to control the time that the users used the internet in the hotel. The users had the login and the password which one. And I want stop the connection when the user get the time.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G - Lost Username And Password For Admin Page

Apr 30, 2007

I seem to have lost my username and password for the admin page for my WRT54G router.Is there a way to retrieve or reset the login?

View 9 Replies View Related

Linksys Wireless Router :: WRT54G V8 / Unable To Navigate The Basic Setup Page

Jan 14, 2008

I have been trying to change my password and all the settings on my WRT54G V8 router today because I forgot the password, and I can't seem to navigate the Basic Setup page. I can log in (most of the time) after resetting the router, but whenever I try to click on a different tab (like "Wireless", or "Security") it comes up with the page saying "This Page Cannot Be Displayed."  I'd like to be able to put a password on it (which I have successfully done before on this router) because I live in a college dorm and would like to keep my internet from being bogged down by other people using it. 

View 9 Replies View Related

Access Linksys WRT54G Config Page?

Dec 24, 2012

I just got a new Sharp Aquos Television and I wanted to try to find the SSID so that I could pick up a connection with my TV. When I went to command prompt and typed ipconfig to get the default gateway, the gateway ip took me to what appears to be my modem's config page and not the Linksys. how I can get to my WRT54G config page.

View 2 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3420 - Remote Administration Over 3G?

Apr 22, 2013

Region : Australia
Model : TL-MR3420
Hardware Version : Not Clear
Firmware Version :
ISP : Telstra

Is remote administration over 3G connection possible? The telstra public IP is not pingable. (from externally) Goes no where when I put the public IP into a browser. (from externally) Any settings changes to enable this?

View 1 Replies View Related

Cisco Firewall :: Administration Of ASA5520 And Router Mpls 1900

Jul 31, 2012

i just want to administor cisco ASA5520 and cisco router mpls 1900 can some tell me as admin what to check as u get into office /reguraly in cisco asa 5520 and vpn mpls router for administrator ,right now its working as configured by supplier for remote sites to connect HQ and access several server,My interest to know what are the basic day to day checkup on cisco asa5520 working as ips and cisco asa 5520 working as content filtering and cisco vpn mpls

View 2 Replies View Related

Cannot Access Router WRT54GX Web Page / Setup Page?

Jul 28, 2011

i need to get into the web page because i need to open my XBL nat and when i type in the password to get into the routers page i get a blank screen

View 2 Replies View Related

Linksys Won't Allow Access To Router Page

Apr 17, 2011

I have a linksys router, Its at my sisters house. her son is trying to hook up his Xbox to it. The router will not allow me to access the router page, ( I called them and walked them through it). I reset the linksys router, by holding the reset button in for 45 seconds. Then I access the router page by going to Windows gives me a popup to log in, What I find on the internet for a default login is the user name is blank and the password is admin. OR the both the user name and password is admin. However it still will not let me into the router page.

I am wondering if the login popup is something with the windows settings. As when I had the router here at my house, I think It just went to the webpage of the router and thats where it asked me for the user name and password. I do not recall the popup login window before the router page. Is there something to turn off to set it so that windows does not give a popup to login and goes to the webpage to login?

View 9 Replies View Related

Linksys Wireless Router :: Map Page On Wrt120n?

Apr 2, 2013

why are some of the lines solid & others dotted on the map page?

View 4 Replies View Related

Linksys Wireless Router :: E3000 - Can't Connect To Router Settings Page

Dec 25, 2012

When I try to go to192.168.1.1 it says connection interrupted.  If i use the Cisco Connect it tells me i am not connected to the internet.  My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly.  I can go online, I just cant get to the router.  

View 9 Replies View Related

Linksys Wireless Router :: E1200 - How To Access Router Admin Page

Apr 1, 2012

I want access the my E1200 website in order to implement new username and password to secure the network.

View 1 Replies View Related

Linksys Wireless Router :: Set Home Page On WRT54GL?

Dec 17, 2011

I am using a WRT54GL for the free wifi service at my business.  Is there any way to set it so that when someone accesses the internet they are directed to my business home page first?

View 1 Replies View Related

Linksys Wireless Router :: E4500 Don't See Version On Download Page

Nov 1, 2012

I see I have but I don't see that version on the download page?

View 3 Replies View Related

Linksys Wireless Router :: E2500 Cannot Connect To Setup Page

Apr 21, 2012

I can't connect to my setup page [url]... I get to the page that says..."There is a problem with this website's security certificate." Then I click the "continue to this website (not recommended). After this it will not connect 
Tried with IE9 and Firefox 11
Firefox says "The connection to the server was reset while the page was loading."
Internet still works. PC is connected directly to router. Tried different port on router. Tried installing CiscoConnect.E2500.1.4.11299.0,0, but it fails saying there is no router connected to PC. Like I said I am on the PC now, wired to router and have internet access via cable modem connected to router. I can see my ireless printer on the network also..

View 2 Replies View Related

Linksys Wireless Router :: E4200 / Modem Page Unreachable

Feb 1, 2012

Once in a while, I lose Internet connection and at the same time cannot reach my Siemens Speetstream 4100b DSL modem's setup page ; it happened again this morning (from both wired and wirelessy connected computers). When I go to the router's setup page , it would usually in that situation show that the router has not acquired the Internet IP Address; I power-recycle (a few times) both modem and router and eventually the router reports that it has acquired the Internet IP Address, but there is still no Internet, and the DSL modem's setup page is unreacheable.The situation usually self-resolves only in an hour or so after the time the router has acquired the Internet IP Address: Internet starts working, and the DSL modem's setup page becomes reacheable. 

View 2 Replies View Related

Linksys Wireless Router :: Way To Access Set Up Page For Secondary WRT300N

Aug 13, 2012

Since the secondary router WRT300N uses the same default IP as the primary installed router EA4500, any attempt to log onto the set up page results in diversion to the Cisco Connect Cloud for the primary router.
Is there a way to access the set up page for the  secondary WRT300N, bypassing the main router intervention via the Cloud  software?

View 3 Replies View Related

Linksys Wireless Router :: Cannot Connect To Admin Page At All On E3200

Feb 23, 2012

I don't have to completely reset my router as I have a ton of configs on it.  Anyway, recently for some reason, I lost all access to my admin page.  Cisco Connect also cannot find the router.  Funny thing is that all of my wireless profiles work just fine.  Meaning all of the computers in my home connect to the internet just fine using the router.  Both the guest access and WPA connected machines.[url]...

View 1 Replies View Related

Linksys Wireless Router :: EA-4500 Can't Login Into Setup Page

Oct 26, 2012

I'm trying to login to my EA4500 setup page. I have the "cloud connect" firmware and when I'm redirected to the "Linksys Smart Wi-Fi" page in my browser, I attempt to login as usual.It accepts my login name and password, and then I get a page that has a rotating graphic and it says "waiting..." It eventualy times out and takes me back to the login screen. I've tried to reboot my router and that doesn't work. I've also disconnected the internet connection from the modem, and entered the router main password, and that gives me the same response as if I tried to connect via the cloud.

View 9 Replies View Related

Linksys Wireless Router :: Can't Access WRT160n Setup Page

Oct 16, 2012

I have updated the WRT160n firmware and, since then, I couldn't access the setup page anymore. I could still use the router as a switch, but couldn't access the setup page and configure it as a router.

View 5 Replies View Related

Linksys Wireless Router :: E2500 - Page Not Fully Loading

Mar 24, 2013

It's' my first router (E 2500) one desk top and two laptop and also a Ipad connected, every thing look fine exept for the Ipad.Lots of page not fully loading, I have to reload couples of time to get it full load. and lots of Youtube video said not presently availale but work fine with laptop or desktop.Did not change any seting on the router, I just plug it and used it

View 9 Replies View Related

Linksys Wireless Router :: Cannot Access E1200 Setup Page

Nov 29, 2012

I'm able to connect to the internet through my E1200 router but I cannot access the router set up page. doesn't work... I can connect to it just fine with my laptop however... so I changed it to as per some internet instructions. Still can't connect via my desktop... Tried ipconfig /flushdns to no avail. Cleared the internet cache Upgraded the firmware (via the laptop) rebooted the computer rebooted the router... reset the router... After rebooting the router I can type in the username and password to access the router, but it never connects....

View 6 Replies View Related

Linksys Wireless Router :: Can't Access Setup Page WRT54GS

Sep 9, 2012

I need to set up a password for my wireless network, but every time I try to access the setup page, the router stops responding.  I've gotten as far as it asking for username and password, where I enter admin as the password....and then nothing.  The connection times out.  I really need to protect my network.

View 1 Replies View Related

Linksys Wireless Router :: Changing Look Of Welcome Page (guest Login)

Feb 9, 2013

Is it possible to change the look of welcome page (guest login) to change so that it is personal. Of course it would be great if the guests have to log on your personal page.On this page you would be able to indicate the rules and  and limitations. It would also be a good option for certain that your guests a limited time duration for the connection and gives max download. This would also be found to be in a log.

View 2 Replies View Related

Linksys Wireless Router :: E3200 Admin Page Times Out

Dec 18, 2011

I recently tried to edit settings on my E3200 and was unable to get to the page. I typed in in the address bar, made sure no proxies were enabled and tried on wired and wireless computers and all the times it said "page could not be displayed" i haven't not reset with the button on the back. I also did an map scan of the router and this is what came up
Interesting ports on
Not shown: 65531 closed ports
139/tcp open netbios-ssn
443/tcp open https
445/tcp open microsoft-ds
1780/tcp open unknown

View 2 Replies View Related

Copyrights 2005-15, All rights reserved