Linksys Wired Router :: WRT160N Cannot Get Rid Of Home Network Defender

Mar 17, 2011

I purchased a cisco linksys router WRT160N and have it wired - when i try to reach some places i get a HOME NETWORK DEFENDER that does not allow me to proceed - how do i get rid of this home network defender - i have tried to go to network magic but that does not work.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: Wrt120n Always Gives Error When Try To Configure Home Network Defender

Jan 6, 2013

I got error message everytime i try to configure home network defender and i tried to find the solution but no luck but everytime i click and enter my email and password i get this message, i bough this router recently and the only troubles i have is with this 

View 2 Replies View Related

Linksys WRT160N Router - How To Block Hulu On Home Network

Dec 9, 2012

How can I block Hulu access via my home network?The reason for this is that I have about 10 computers connected to the network and not very much bandwidth, so I would like to limit web access strictly to browsing, emails, etc and not for streaming TV/media.

My network is running on a Linksys WRT160N router that has been flashed with DD-WRT v24-sp2 (04/23/10) std firmware.I have tried "Website Blocking by URL Address" and "Website Blocking by Keyword" in my router settings but neither seem to take effect.

View 15 Replies View Related

Linksys Wireless Router :: WRT160N Unable To Connect Ipad3 To Home Network

Dec 12, 2012

I am unable to connect my Ipad3 to my home network (WRT160N router). It has been working for the last 8 months, and stopped working after I installed Direct TV App on Ipad..It detects the network, but not accepts the PW.... I have multiple wireless devicess connected to my network without any problems..The funny thing is that my neighbor brings his ipad to my house and he is able to connect..My ipad connects to any other network...just not my home network.. I contacted Apple who spend hours with me on the phone and suggested doing a full reset on the ipad, but still did not solve the problem..I called and already paid for linksys support ($62.95) who spend hours with me on the phone, but suggesting: "maybe you need to buy another router"...REALLY!!!! Again, I have 3 Smart TVs, Xbox360, and Wii, that are connected to the network just fine .even my neibor comes with his Ipad3 and connects to my network just fine......and I can connect with my ipad to any other network without any problems... BTW, I have already removed the DirectTV app from the ipad....but I still cannot connect to my network..

View 2 Replies View Related

Linksys Wireless-N Router (WRT160N) / Home Network Router Constantly Drops Connection?

Jan 13, 2012

Often my router drops connection to all my devices. Multiple times a day. It's only for a minute or so, but it's annoying. I'm using a Linksys Wireless-N router (WRT160N) with WEP encryption. I'm running two Windows 7 laptops, LG BluRay player, Apple TV, Xbox 360 (Wired) iPhone 4, and a iPad 2. It doesn't matter if I'm browsing the web, watching Netflix, or playing a game, the connection gets lost. As we speak it happened again. I have no clue on what to do. I've reconfigured it multiple times. Firmware has been updated months ago.

View 6 Replies View Related

Linksys Wired Router :: Lost Set-up Disk For WRT160N V3

Jul 19, 2012

I've lost my set-up disk for my Linksys model WRT160N V3.

View 1 Replies View Related

Linksys Wireless Router :: Wrt160n Really Slow Wifi Compare To Wired?

Jun 25, 2012

get a new router. but lets give it a try. I read many many post on how to optimize the speed of the router but none worked so far.I got a great wired Internet connexion hitting between 45 to 60 Mbps[URL] the wifi is crazy slow on Iphone, Macbook pro and iPad staying between 3 to 8 Mbps....
 
I tried to change all of the specs, did the firmware update. is there a perfect configuration with the new firmware ?

View 9 Replies View Related

Wired Printer On A Linksys Home Network?

Feb 19, 2011

Is it possible toconnect a wired printer to the router and have it become a part of the network?

View 6 Replies View Related

Linksys Wireless Router :: WRT120N / E1200 - Extend Home Network With Both Wired And Wireless Connections

Jan 27, 2013

I am trying to extend my home network into my basement with both wired and wireless connections.  I have a WRT120N upstairs, which is connected to my cable modem.  I have an E1200 in the basement, which I have connected with a LAN port.  DHCP is turned off, and all wired connections are getting an address from the upstairs router, and connecting to the internet successfully.I've configured the wireless with the same SSID on both routers, but the clients that connect to the downstairs wireless are not able to access the internet.  They are getting an IP address from the upstairs router, but can't get past the gateway. 

View 1 Replies View Related

Linksys Wireless Router :: WRT160N Slow Wired And Wireless Connection

May 10, 2013

My WRT160N V3 halves my connection speed (5mbps to 2.7)with both wired and wireless. I have tried changing a lot of settings.

View 4 Replies View Related

Linksys Wireless Adapters :: Connect WRT160N Wired With It?

Mar 18, 2013

I have WRT160N at home and I would like to connect it with router with Ethernet and then connect WRT160N wirelessly with iPad...

View 1 Replies View Related

Linksys WRT160N - Sandbox Wireless Devices From Wired Ones

May 1, 2011

I was wondering if there was any way with a typical home router (for instance I have a Linksys WRT160N) to create a wireless network which is essentially sandboxed from the rest of my network. Basically I want devices on this network to be able to access the Internet only, but not any of the other computers on the network.

View 2 Replies View Related

Home Network :: Need Input On Network At Home Newly Wired

Jan 14, 2012

I am a new student in networking, taking the CCNA courses, and now want to rewire my home. I currently have a cable modem and E2500 setup running my network. I want to get the modem and router out of my computer room and in the basement where the cable enters the house. I want to do this to clean up the computer room wiring a bit and to run line drops to different rooms in the house where the internet will be utilized.Currently there are two PC's, a laptop, a tablet, sometimes a phone, and an XBOX using the internet. I want to get my printer back up and running on the network but thats another story. Only one PC is currently hardwired. I would like to run two cables into the room with the PC and XBOX that are currently using wireless, at least two into the computer room for the PC and network printer, and one or two into the living room for the blue ray player and possibly an internet tv.

View 1 Replies View Related

Linksys WRT160n -1 Router With Multiple Duplicates Of Same Network?

Apr 14, 2011

I want to create a home network to share all my files across my three computers.. two pc, 1 mac laptop.They are currently all connecting wirelessly to my single router (linksys WRT160n flashed with DD-WRT). When I try to share the drives.. I notice they are all connected to separate duplicate network names ... such as NetworkName1, NetworkName2, NetworkName3 (even when they all connect to same SSID). get them all connect one network NetworkName so I can share folders across?

View 5 Replies View Related

Linksys Wireless Router :: WRT160N - Can't Connect To Old Network

Aug 11, 2011

I have" a WRT160N but I guess we had a power outage while I was on vacation and now I can't connect to my old network I set up.I see the Linksys internet connection and I can connect but its not the password protected one I set up. When I go to "manage connection" I can see the old "house" connection but can't connect

View 4 Replies View Related

Linksys Wireless Router :: PC Tablet Cannot Add It To Network On WRT160N

Dec 27, 2012

I have just purchased a PC Tablet, but cannot add it to my network on my WRT160N Router.All I get is "Authenticating" then "Authenticating problem".

View 1 Replies View Related

Linksys Wireless Router :: WRT160N Loosing Network Connectivity

Feb 23, 2008

I am experiencing - loosing network connectivity entirely (between the router and the cable modem) or loosing connection to some clients: 2 wireless laptops - one N and one G, and 4 wired connections. This requires a reboot of the router 2-3 times a day. Never experienced any of these problems with a Linksys WRT54G, a unit that this one replaced. Unless I can resolve it, the WRT54G is going back in, and WRT160N is going back.

View 9 Replies View Related

Linksys Wireless Router :: WRT160N V1 - Network Constantly Disconnecting From Devices

Dec 31, 2012

The network is constantly disconnecting from my devices and wont let me reconnect...I reset the network completely back to factory settings and started from there. Some of my devices didnt want to connect at all after the complete reset.These are the settings that I have changed: SSID has been changed,wifi security(wpa2 personal,AES) ,channel(width=20, channel=auto) ,DNS server(changed to Norton DNS: 198.153.192.40 & 198.153.194.40) & router management logon password & firmware upgrade to 3.0.03...
 
Router:Linksys WRT160N V1

Firmware:3.0.03

View 9 Replies View Related

Linksys Wireless Router :: Wrt160n - Expand Network Range In House?

Sep 27, 2011

I have a wrt160n that I would like to use to expand the range of my wireless network. I have tried a few solutions, but to no avail. I am thinking I have just not found the proper steps.I am behind a dsl wireless router that Telus has provided me. The values of that router setup are as follows:SSID: TELUS4108WPA/WPA2-AESDefault gateway: 75.156.190.1DNS address: 199.185.220.254Subnet mask: 255.255.255.0

View 9 Replies View Related

Linksys Wireless Router :: WRT160n - Unable To Connect To Network With New Laptop

Jun 24, 2012

This was for a WRT160n v3.0.02 I looked up several suggestions online and decided to update the firmware to v3.0.03 This seemed to only make it worse as I could no longer connect, and when I turned the router off and back on it would allow me in for about a minute and drop me right away.I started tweaking with the settings, and came across some posts here such as this one, started tweaking with the channel settings and everything. Nothing. If anything I somehow made it worse since now instead of dropping repeatedly it wouldn't connect at all except for about a minute after restarting router, then it would drop completely (I would either get the limited access notification or I simply couldn't connect and windows said to unplug the access point. I recalled I had another Linksys router that I wasn't using in storage, a WRT54G2v 1.0.01 so I set that up, no problems... at first. All other devices picked it up right away, but once again, my new laptop decides it's too good for the freaking network and drops it repeatedly telling me there's a problem with the access point. 
 
So at this point I'm thinking it might NOT be my network, but my wireless card or something, I uninstalled and reinstalled, updated drivers, (I use a Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC) I even came across this article and disabled browser service and NETBios (including all other devices on my network). It brought back the network on my laptop for a bit, only to smugly come crashing down again. 

View 2 Replies View Related

Linksys Wireless Router :: WRT160N V3 - Network Crashes When No Devices Are Connected?

Nov 6, 2011

For a while now, my wireless network at home has been very unreliable. I posted on these forums before, asking for assistance to fix crashes that seemed to be random. I was largely unsuccessful, and the problem continued. However, as I continued to experiment with different methods to keep my network up and running, I noticed that as long as I had at least one device connected to the network around-the-clock it never crashed. This was easy enough, as I own an iPod touch and a dock (I would leave it sitting it the dock unlocked all the time). But it's annoying to never be able to leave the house with it, and I'm ready to finally get a solution to the problem once and for all. I would prefer not getting a new router, but if worse comes to worse I will.

To sum it up:
 -Works perfectly (when up) at full speed, never crashes unless there are no devices connected to it.
-When it does crash, it is very difficult to 'coax' it back into working again; it's been down for weeks at a time before.
-For some strange reason (and maybe this is a clue), newer game systems such as a Nintendo DSi or PS3 can make it start working again. I, of course, own neither of these.
-I'm using a WRT160N V3, latest firmware as far as i know.

View 9 Replies View Related

Linksys Wireless Router :: Wrt160n - Original Network SSID Had Been Changed?

Oct 8, 2009

I have a wrt160n router set up at a friends house that i would connect my windows xp laptor to when i would go there.  it always worked fine. i recently got a new laptop with vista 64 bit OS.  i went to my friends today and connected via wireless for the first time.  i expected to get prompted for the security key.  instead it asked for the pin #.  the pin number was something new i noticed when i replaced an older linksys with the new wrt160n so i had it in my notes.  i entered the pin number and connected to the wireless router.  but then my friend laptop could not connect and said it couldnt find the network.  when i viewed the available networks, i noticed that the original network SSID had been changed to my vista laptop's computer name.  i had to physically connect my laptop to the router and reconfigure the settings of the wireless network. then my friend was able to see the available network and automatically connect..

View 6 Replies View Related

Linksys Wireless Router :: WRT160N / E2500 - Network Connection Via Fiber

Aug 4, 2011

here is what I have:
 
A) Sonic Wall @ 192.168.1.215
B) Linksys Switch (WRW248G4P) @ 192.168.1.254
C) Linksys Router (WRT160N) @ 192.168.1.202  (Disabled DHCP Server)
D) Linksys Router (E2500) @ 192.168.1.203
E) Windows Server 2003 @ 192.168.1.200
F) There is also a Router @ 192.168.1.201 that runs DD-WRT that has an enabled DHCP Server.
 
It goes something like this
 
i) A - B --ETHERNET-- E
ii) A - B --ETHERNET-- C
iii) A - B --FIBER to another building, then ETHERNET -- D 
 
Everything connects to the internet, but (D) on (iii) doesn't allow connection to the server (E). What can I do to make this work?

View 1 Replies View Related

Linksys Wireless Router :: WRT160N Setup As Adapter To Connect Printer To Network?

Jul 30, 2011

How do I setup a WRT160N as a wireless adapter to connect a wireless printer to my network? I do not use the wrt 160 as a router because I have an AT&T router for u-verse connection. Also, I physically cannot wire the printer to the main router (opposite corners of the house).  

View 2 Replies View Related

Linksys Wireless Router :: Wrt160n Can Access Work Network From Multiple Public Locations From IPad

May 17, 2010

home router is a wrt160n v3 With my iPad I set up the built in IPSec VPN to my office's cisco gateway. I successfully get the VPN logo. With an RDP app, i can access my work network from multiple public locations from my iPad. At home, on my laptop, I start the cisco client then use the windows rdp, presto i'm in my work network. At home on my iPad I can activate the VPN, but I can not connect with rdp. I spoke with linksys support tonight they had me add port 3389 to port range triggering and disable the firewall on the home router. This didn't solve the problem. To recap: 1) I can connect to my work network with rdp from multiple public locations, but not at home with the iPad 2) I can connect to my work network at home with my laptop with the cisco client ant the windows rdp

View 6 Replies View Related

Home Network :: How To Extend My Wired Internet Using Wireless

Mar 13, 2011

what i am after is, a way to extend my internet in a room that cant connect wireless. i want to be able to connect my ipod touch/ nokia phone / ipad on my home network. i have wireless in the house, But, because of the insulation in the walls and ceiling in this room(kingspan, with the silver foil on it) i cannot get a signal, i am wanting to know if it is possible to some how use the wired connection from my pc in the room and add a wireless dongle(usb) and some how get it to share the connection?

View 5 Replies View Related

Home Network :: Can Share Files Wired But Not Wirelessly

Jan 10, 2012

My Laptop IP 192.168.0.198 cannot see shares with desktop 192.168.0.199. Both PC's are win 7 with firewalls turned off. However the desktop can see shares on laptop. All computers are part of WORKGROUP. When wireless i can ping desktop.When i plug Ethernet cable to laptop 192.168.0.196 I can access desktop files.Also weird thing i have turned off password protection sharing but still asked for password (can live with that though)

View 1 Replies View Related

Home Network :: Using Both Wireless And Wired Ethernet Connections On Laptop

Aug 17, 2011

I have some servers running in my office and I have hooked them to a wireless router. I want to access those servers from my work laptop. At this time, I have to disconnect from my company network and assign static IP to wireless interface to access those servers. is there a way to configure my laptop so that i can be hooked to my company network through wired interface and can access my servers through wireless interface which is configured with static IP

View 9 Replies View Related

Wireless Laptop Cannot Ping Wired Desktop On Home Network

May 7, 2012

I have a wired desktop PC (HP dx2480) running XP SP3 connected to a LinkSys Wireless 4-port router, and a laptop (Lenovo X61) running XP SP3 connected wireless to the same home network (192.168.0.x). The LinkSys connects by cable to a DSL router for internet access. Both PC and laptop get DHCP IPs from the Linksys (which I have hard-coded - mapped MAC to IP). They are on the same Windows Workgroup "HOME". Both Desktop and Laptop have same Windows User Logins. My desktop had a virus attack (trojan), which I removed and re-installed XP SP3 (from HP disks). Since then the PC seems to have "network sharing and discovery issues" on the network.

- The wired PC CAN ping the laptop, but laptop CANNOT ping PC.

- Both laptop and PC CAN access the internet.

- The laptop and PC COULD NOT see each other on Windows Workgroup, or see shares. This got resolved once I added IPX/SPX/NetBios Protocol on both the wired and wireless NICs on both PC/laptop respectively. NOTE: Before adding this protocol, I double-checked that File-Printer Sharing was enabled on both NICs, Windows Firewall had File-Print Sharing as exclusion. I tried everything including disabling firewall on both, disabling McAfee scanning on both, disabling Firewall on Linksys, but nothing worked.

- The laptop CAN see the NAS (Seagate GoFlexHome - connected by cable to LinkSys) using Seagate Dashboard software and direct IP. The PC CANNOT access the NAS using the Dashboard software but CAN access through direct IP. The NAS is named "goflex_home", which both can discover as \goflex_home from explorer.

- The laptop CAN see ITunes Home Share from a NAS, but the PC CANNOT see any home shares on the NAS (or from the laptop). I even added Home Sharing TCP/UDP ports as exceptions on the Firewall on the PC, but it still doesn't work.

- Some blog checking the node type on IP addresses given by DHCP. The laptop has Node Type "Hybrid", and the PC has "Unknown". I even went to PC regedit.exe and modified the and Change EnableProxy to 0 or 1 (instead of 2 that was in the PC as default).

- I have used SG TCPOptimizer on both laptop and PC to revert to Windows default?

View 5 Replies View Related

Linksys Wired Router :: VPN Can't Connect To Network RVS4000

Mar 14, 2011

I have successfully configured my Cisco RVS4000 for VPN Access, and Installed QuckVPN on my client machine.  I can connect using QuickVPN no problem, but I cant access anything on my network.  When I try pinging any of my servers I am unable to do so.  I can ping my gateway thats about it.

View 1 Replies View Related

Linksys Wired Router :: BEFSR81 With WRT54GS In Same Network?

Sep 13, 2011

I currently have a LinkSys BEFSR81 connected to my cable modem as I need at least 6 wired ports for my house network.  I also have a WRT54GS that is currently unused, but I would like to add it to the network so I can have some wireless connectivity as well. 
 
Assuming that it's possible, what's the best way to combine these two units into the same network?  Can the WRT54GS simply be connected downstream from the BEFSR81 via one of the open ports?  I'm assuming that I'll have to change the IP address on the wireless unit to make it individually accessible for configuration, status checking, etc. 

View 2 Replies View Related

Linksys Wired Router :: RV042 - Can't See Network Shares After Connecting Router

Nov 10, 2011

I've installed a RV042 and my terminals cant even ping each other. They have Internet, but they cannot ping each other, or open network shares. It is not a dns problem becouse it does not work with the IP.

View 1 Replies View Related

Linksys WRT110 Router / HP G60 Causes Wireless And Wired Network To Crash

Jun 6, 2012

My brother has an HP G60 from 2009 with windows 7 home premium and 64 bit operating system. Whenever he turns it on and connects it to the internet, the whole network crashes. My xbox, ipod, laptop, and the main desktop (Which we also just changed to a Dell one.)downstairs all cannot connect to the internet. This lasts from anywhere between 2 and 15 minutes and it continues to crash the internet in about 15 minute intervals as long as his computer is connected to the internet. No other devices in the house cause this as I can have all of my stuff connected and nothing happens. We have a Linksys WRT110 router but I don't think that or the modem is the problem as we have changed both multiple times. This has been happening for about a year ever since my oldest brother gave my brother the laptop.

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved