Linksys Wireless Router :: Can't Access Admin (browser Based Utility) On E350

Jan 10, 2013

I'm trying to access the browser based utility (@ http://192.168.1.1) on my router and having no luck.  I've tried from two different computers (each Win 7) and each browser.  I've tried wired directly to the blue/LAN ports and through Wifi.  I've confimred that the IP is correct (or is at least the default gateway for each machine).  The Cisco Connect tool can't find the router either.the only thing that can find the router is the CiscoConnect Express app on my iPhone.Internet is working fineish (some problems with Wifi), I just want to play with some settings.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: E2500 - Can't Get To Browser Based Utility

Dec 31, 2012

When I try to access the browser based utility through the address bar, I don't have the username or password.....tried admin for both and for just the pw.  When I try to access advanced settings through Cisco Connects router settings / advanced settings, it comes up as if many objects were unable to load.  Linksys E2500. 

View 7 Replies View Related

Linksys Wireless Router :: WRT160N - How To Access Web-Based Utility

Dec 10, 2008

I am having trouble logging in on my wireless router and when i put "admin" (WITHOUT QUOTATIONS) on the password, the same prompt kept on coming for three times and after that the message says "401 Authorization Required" (WITHOUT QUOTATIONS). I don't get though, i installed the wireless router just after i change admin and my password into (******).

View 9 Replies View Related

Linksys Wireless Router :: WRT120N Can't Access Web Based Admin Screen From Firefox 7.0.1

Oct 29, 2011

I have a WRT120N with Firmware 1.0.06..First peculiarity is that I can't access the web based admin screen from Firefox 7.0.1.  The password prompt appears but won't proceed from there.Second, and main issue is that frequently (several times a day) I get a 'Limited Access' error on my wireless connection.  On mouse roll over Windows 7 Pro gives the error message 'no internet access'.  This problem appears to resolve itself after several minutes or straight away if the router is powercycled.  During these 'Limited Access' moments I am unable to connect to the route web based admin page nor ping or tracert. [code]

View 8 Replies View Related

Linksys Wireless Router :: Cannot Now Connect To E3000 Using Browser Utility

Apr 8, 2012

Not sure how I got here, but I cannot now connect to the E3000 using the Browser Utility. USing https://10.x.x.x, shows certificate warning page, then when I continue "Internet Explorer cannot display the webpage".DId NOT change the host hame.Last time I used the Browser Utility (weeks ago) was to disable the wireless to check something. Reenabled the wireless, no apparent problems until today when I tried to access via the Browser Utility.As I never ran Connect, there are no settings to change, and now it cannot detect the device.I guess I'll wait until I HAVE to change something, and do a 30-30-30 reset.

View 1 Replies View Related

Linksys Access Point :: WAP54G 3.1 Can't Log On To Web Based Utility

Feb 27, 2011

I am running my home network and WAP(WPA2) behind a d-link gaming router (DHCP) with no inbound or outbound restrictions; however,  I am unable to access the internet using my ipad unless I put the  WAP in the DMZ.  Also, if I configure security using the setup program, I  can not log on to the web based utility.  I have to disable security with the set up program and then log into the utility.  BTW..the UID must be left blank to log into the utility( PW only) to configure the WAP, even though the manual says otherwise.
 
Now after all this, the WAP will be up and running for days even a few weeks.  Then for no reason it will no longer be accessible and I will power it down and back up and it works fine.  But this will work only a few times and I have to hit the reset button and reconfigure it all over again.  
 
The firmware has been updated and nothing else has issues on the network.  This has been happening since i bought it 3yrs ago, using an iPad, iPhone, Laptops, and PCs( XP and Windows 7) but in the past year it has been more frequent.

View 2 Replies View Related

Linksys Wireless Router :: How To Change Language Of WRT54GL's Web-based Utility

Jan 16, 2008

I'm just finished with the wizard of my WRT54GL and follow the instructions in my user's manual I enter in the Web-based Utility of the router but I was surprised when I see that the language is French?! Once I choose the language for the wizard - english, it was english but now the Web-based Utility is in French. For luck I know some French from the high school but I prefer to work with English. How to change the language of the Web-based Utility from French to English

View 9 Replies View Related

Linksys Wireless Router :: E4200 How To Format Drive For Web Based Utility

Apr 28, 2011

How do you format the drive for this with the routers web based utility?  Or do you just do this while its plugged into your PC then connect it to the router.   I know how to format the drive with the web based utility using the FAT system but its limited to 4gb files.

View 8 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR702N - Cannot Access Web-based Utility

May 4, 2013

Region : UnitedStates
Model : TL-WR702N
Hardware Version : V1
Firmware Version :
ISP :

Just got my new TP-Link device and intend to use it in client mode for my new audio receiver to connect to my home network.Trying to configure the device, and I cannot even access the online utility. I tried using the following address:

192.168.0.254
192.168.1.1

None of these seem to work. Tried on Chrome, then Internet Explorer and made sure that the web browser was not set to proxy (it was not set to this in the first place). The address just doesn't seem to connect, and I get a "This page cannot be displayed" note, as if I'm reaching a bad address.

View 1 Replies View Related

Linksys Wireless Router :: WRT45G Version 7 Reboot When Want To Access In Web Base Utility

Sep 22, 2011

i have router  WRT45G ver 7 it work but when i want  to access in web base utility the router reboot

View 4 Replies View Related

Linksys Wireless Router :: WRT54G - Password For Access Router's Web Utility?

Aug 10, 2008

I have tried multiple times to hard reset my Wireless G WRT54G ver.2 router, but have had no success. I held the reset for 15 sec, 30 sec, 2 min, etc and also tried holding it and then unplugging it and then plugging it back in. I've tried everything that I have seen suggested. My problem is that I don't know what the password is to access my router's web utility thing and I need to change the IP address. With every reset attempt, I hope that the default admin password will work, but sadly no.

View 2 Replies View Related

Linksys Wireless Router :: Can't Access WRT54G Through IP Within Browser

Apr 7, 2012

I can't access the router through the IP within the browser. It's an older WRT54G. I've never used the downloaded software that allows you to connect to it, but that's what I was going to try.

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Cannot Access Via Web Browser

Apr 28, 2013

Before the latest update and with the latest update, after about one week, I cannot access the router wirelessly using 192.168.1.1. Using IE 10, Chrome, and FireFox all give me no response. I type in the address and the web page never changes. It keeps me at the home page of my browser. I do not get any errors or messages.
 
Also I tried to use the DHCP Reservation page, and the names of the devices will not allow spaces or any special characters. Sure would be nice to allow such.
 
I just noticed that my router reverted back to 1.1.28.146856. I have updated twice via the web browser to version 1.1.28.147876 and once via direct connection and the downloaded file, but the router keeps reverting back to the older firmware.

View 6 Replies View Related

Linksys Wireless Router :: Unable To Access WRT310N Through Browser

Feb 9, 2009

I am unable to access my router through the ip address (192.168.1.1) even though I have verified that is the address. To be sure, I did an ipconfig release/renew, but no results. I want to limit a user's network access by MAC address and I don't think I can do that without accessing the router thru the ip address. 

View 2 Replies View Related

Linksys Wireless Router :: E4200 - Guest Access Through Web Browser?

Mar 26, 2012

I have the guest Access enabled on my E4200 but I can't get any of the apple devices or dell laptops to show the LOGIN screen in the web browser.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Wifi Guest Access Never Pops Up Browser

Dec 5, 2011

I have the wireless guest access set up in my E4200 flash to the latest firmware. When I connect to the wireless guest network it comes up under the 192.168.33.xx IP address. I can connect fine but it never pops up the browser so that you can type in the guest password. I'm running Windows 7 but I've also noticed the exact same problem under XP.The only thing I can guess is the problem is that I have this acting like an access point and all DHCP requests go to my router. I've basically turned off DHCP on this and plugged the network connection into the switch on the back.

View 3 Replies View Related

Linksys Wireless Router :: E3000 Cannot Access Admin Via Cisco Connect

Apr 25, 2012

I tried all methods: Cisco Connect (on Vista), http and https, but none works. However, the router seems function correctly. My laptop can acquire DHCP address and browse via the router. But I just cannot connect to the router to perform Admin tasks.Problem: when I launch CiscoConnect: the GUI shows "Cannot access your router", even though I am using the router to browse the net wirelessly and wirely. Using browser to navigate to http://192.168.1.1 and https://192.168.1.1 also give me cannot access error!

View 1 Replies View Related

Linksys Wireless Router :: No HTTPS Access To Admin Interface On WRT160n V3?

Feb 16, 2012

I was unable to access the web admin on my WRT160n v3 w/ latest firmware this morning. Reset config to defaults & was able to get in. Enabled HTTPS access & disabled HTTP access & was right back where I started; reset to defaults again & left both boxes checked. Can access via HTTP, but HTTPS requests get refused/reset.
 
The reason I needed access was that when I booted up my laptop this morning, my wireless card wasn't picking up an IP address via WIFI, only worked via ethernet, so I need to see what was going on there — several reboots of the router didn't fix, nor has it fixed the HTTPS access problem described above. 

View 6 Replies View Related

Linksys Wireless Router :: WRT120N - Can't Access Admin Panel From Other Computer

Dec 16, 2011

Before, I can access admin panel of router via 192.168.1.1 on any computer, be it wired or wireless.This time, I can't anymore.This time, I can only access admin panel on 1 computer only. The computer in which it's directly connected to the router, wired. All other computers, connected to a switch, which the switch is also connected to router, can no longer access admin panel.I can still open 192.168.1.1 with a username/password prompt but I can't log in. It's like it's always wrong password. Same with accessing from laptop (wireless).Before, I can access admin panel from any computer (wired), even from laptop (wireless). There are times that I have to restart router in order to fix my internet connection. Only this time, I have to access it from the computer that's directly connected to router (wired).How do I revert it back so that all computers will be able to connect to admin panel of router?I have just finished upgrading firmware from 1.0.05 to 1.0.06 but I still have the same problem.

View 5 Replies View Related

Linksys Wireless Router :: EA6500 No Admin Access Until Physically Reboot

Nov 11, 2012

Just setup my new EA6500 router and while in general it seems to be performing ok I am experiencing some problems with the admin. It seems that frequently either via cloud or local i get the cannot find router message or waiting graphic which results me in having to manually reboot the router so that i can access the admin page again, The router still works fine but no admin access until i physically reboot. This kind of defeats the whole purpose of using cloud if just by accessing the router or making changes it leaves admin access inoperable!

View 9 Replies View Related

Linksys Wireless Router :: Unable To Access Cisco Admin Page For 54G V5

May 3, 2012

I moved. Runnig an iMac at home. Can connect to the internet but was not able to access my cisco admin page for 54G V5.  Also need to connect VPN but unable to. 

View 1 Replies View Related

Linksys Wireless Router :: E1200 - How To Access Router Admin Page

Apr 1, 2012

I want access the my E1200 website in order to implement new username and password to secure the network.

View 1 Replies View Related

Linksys Wireless Router :: WRT610N V2 Access Restrictions Menu Is Missing In Admin Gui

Nov 18, 2011

I 'd like to use the access restrictions capabilities of the WRT610N v2. Unfortunely the "Access Restrictions" menu is missing in the admin GUI; I 've got all the others : "Set -up", "Wireless", "Security", Storage, Applications and Gaming, Administration and Status. I've checked the Firmware already and i'm using the very last one available on the cisco web site. I also noticed that I do not have the "Linksys by Cisco" text on the upper left corner as one can read on user guide but just "Cisco".

View 5 Replies View Related

Linksys Wireless Router :: DPC3825 Cable Modem Gateway - Can't Access Admin Part

Sep 20, 2012

i have a dpc3825 cable mdem gateway i spent 4 hours on the phone with charter yesterday i cant access the admin part of the router i go to 192.168.0.1 and up comes the setup username and password i have reset it numerous times i have left it blank as per instructions i have tried admin and blank cusadmin and password i cant get in

View 1 Replies View Related

Linksys Wireless Router :: Need Access E1000's Web-based Setup Page

Jan 6, 2012

I have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for it?

View 3 Replies View Related

Cisco Wireless :: WRV200 After Update Web Based Admin Tools Are Not Working

Aug 3, 2010

After flashing the latest version of the firmware for the WRV200 (1.0.39) all of the pages on the web based admin tool are not working, and some are missing alltogether.I need to be able to re-flash the firmware to an earlier version (or attempt to re-flash this version) without using the web-based admin tool, as the page for doing the flash is one of the one's that is missing. Re-setting it doesn't work. I have tried searching here and through Google without any luck so far. The WRV200 works fine, but obviously is not locked down from a security standpoint, which is a large problem.

View 5 Replies View Related

Linksys Wired Router :: BEFSR41 Lost Access To The Admin Page

Nov 13, 2007

I have a BEFSR41 V2 working as dial in ADSL connection.While I changed my settings of the UPnP in the router I lost access to the admin page. Well most strange is that everything is working.I kept my internet access as well as the computer and printer access.The only thing I lost is access to the router admin page.The password it was not defaulted to admin, neither kept the password that I had set up.

View 9 Replies View Related

Cisco Routers :: RV042 Browser Certificate Errors When Logging Into Web-based Gui

Jan 2, 2012

I have set the RV042 up for QuickVPN access.  The router config recommends turning HTTPS on in the firewall when using QuickVPN.  The side effect to this is any web browser throws me certificate errors and warns me not to continue logging in to the router's config.  How do I fix this so the browser does not throw these messages?
 
Router is Linksys-branded, using latest firmware for this hardware (1.3.13.02-tm)

View 12 Replies View Related

Dell :: Dimension 3100 / E350 - Connect Ethernet Cable From Netgear Router

Dec 26, 2011

Using a Dell Dimension 3100/E350, where do I connect the Ethernet cable from Netgear router.

View 1 Replies View Related

Linksys Wireless Router ::  WRT45G Reboots On Accessing Web Base Utility

Sep 22, 2011

i have router  WRT45G ver 7 it work but when i want  to access in web base utility the router reboot

info:
led power is on stable
led lan is on
led wlan on  and the access point work
 
 1.http:\192.168.1.1

2.enter user name and password (admin,admin)

3.hir the page begin to get  after a few second  the router reboot Page cannot be displayed completelty

i try :

- simple reset

-(30/30/30) reset and i enter in managment mode firmware upgrade
 
i don't try hardware reset

View 6 Replies View Related

Linksys Cable / DSL :: No Browser Access For Setup / Configure AG300

Apr 27, 2012

I've been trying to get into the web interface for my AG300.
 
I keep getting the "Problem Loading Page" dialogue - the address has not been changed from the default 192.268.1.1
 
So far I have tried it in Windows & Ubuntu, and in Firefox, Chromium and Explorer. I have sone a hard rest and rebooted it and the computer numerous times.
 
if I ping that address there is no result, but I obviously have internet access.

View 3 Replies View Related

Linksys Wireless Router :: Browser Cannot Display E3200 Webpage?

Jun 25, 2011

I have installed my E3200 downstream from the Verizon FiOS Actiontec (going the other way disables FiOS functions). 1.  My browser can get to the E3200 (192.168.1.2) when connected via wireless, but not when connected via ethernet cable. 2. When going to connect wirelessly, the 2GHz connection is visible but the 5 GHz connection is not  (I have them named differently).    How do I see both wireless connections?

View 9 Replies View Related

Linksys Wireless Router :: EA4500 / Poor Performance As Master Browser?

Sep 28, 2012

I have EA4500 acting as a router on domainless all-Windows network of two XP machines.Unfortunately, EA4500 aggressively grabs the role of the Master Browser (I am talking about Computer Browser Service) on the network (regardless in which order you power the devices up) and then doesn't serve as a working Master Browser - both Windows machines stop listing the network computers in the "Network Neighborhood" and incur massive timeouts when attempting to view the listing.A quick look with 'browstat.exe status' reveals that indeed the router has announced itself as a Master Browser device, but returns errors when you query it.Quite predictably, without the router, both machinces figure out amongst each other who will be the Master Browser and everything works fine. The problems begin only when you add the router to the network.
 
1) Is there any way to make EA4500 work like a full-blown Master Browser (the one that not only announces itself, but also serves as such)? having a Master Browser integrated in "always-on" router would really improve the predictability of the network.

2) If not, is there any way to disable the Master Browser on EA4500? For now I managed to achieve that by assigning the router to different workgroup name, but this is lame, as I now can't connect a disk storage to the router and use it within the same workgroup.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved