Linksys Wireless Router :: DPC3825 Cable Modem Gateway - Can't Access Admin Part

Sep 20, 2012

i have a dpc3825 cable mdem gateway i spent 4 hours on the phone with charter yesterday i cant access the admin part of the router i go to 192.168.0.1 and up comes the setup username and password i have reset it numerous times i have left it blank as per instructions i have tried admin and blank cusadmin and password i cant get in

View 1 Replies


ADVERTISEMENT

Linksys Cable / Dsl :: Cable Modem Dpc3825 - Hook Up To Smart Apps Wifi?

Apr 23, 2013

With this modem, can you hook up to the Linksys Smart Apps WiFi?

View 2 Replies View Related

Linksys Cable / DSL :: Cisco Modem DPC3825 Won't Recognize It

Mar 27, 2012

I recently upgraded, through my ISP, my high-speed modem to the DPC3825 model modem/router. But when I try to connect to the DLink switch, the modem freezes, and doesn't recognize it.  My previous setup was modem, to my DLink router (DIR 615), to my switch. With my new setup, I just bypassed the DLink router, because my new modem includes router capability.Is there some compatibility issue between the new modem and the DLink switch?

View 1 Replies View Related

Linksys Cable / DSL :: DPC3825 Modem Remote Management Port Setting?

May 24, 2011

I am looking to permanently reset the default remote management port of the MODEM DPC3825 to something other than 8080. how to PERMANENTLY change the port from 8080? In the web interface under administration I have several times set it to something else other than the defaulted 8080 but when the modem is rebooted or reset, it goes back to the default 8080.

View 4 Replies View Related

Linksys Wireless Router :: Can't Access Cable Modem Status Page With EA6500

Apr 5, 2013

I cannot access my Motorola SB6141 cable modem status page at 192.168.100.1 thru the EA6500 router. I can bypass the router and can connect to the status page with no problem. Is there a setting to change or can I possibly do port forwarding to access it?

View 9 Replies View Related

Cisco WAN :: DPC3825 Shouldn't Default Gateway IP Have Same Mac Address As Computer / Router

Feb 23, 2013

I would like to know what ip addresses I should see in this  table. Shouldn't my default gateway IP have the same mac address as my  computer or router? There are 2 different ip address/mac addresses from  different a ISP than mine. I have a cisco DPC3825..I suspect a someone is spoofing my DNS.

View 4 Replies View Related

D-Link DIR-601 - Access Modem Router As Admin?

Feb 26, 2013

I was trying to access the modem router as the admin but AT&T seems to have a pain in the butt security system from me making any changes. I wanted to forward some ports to setup my Synology DS212j Network Attached Storage (NAS). I connected my d-link router to the already setup modem router which I am now connected to. I have to run off to school but I was wondering, would I be able to forward the port off my d-link DIR-601 and be able to host my NAS server off that?

I don't have too much in-depth networking experience besides setting forwarding ports, setting static IPs, but I can't do that since I am not the admin for the AT&T router. I figure the password for the AT&T router is just defaulted to admin or blank but I haven't had time to fully test everything out.

View 4 Replies View Related

Linksys Cable / DSL :: X2000 Router / Modem Only Gives Local Access?

Jun 4, 2012

I've never setup a router before, but when I tried to setup this one it required me to put in the isp ip, subnet, gateway, and dns. I assumed that this was not my ip but the ip of zoomtown which when i looked at the old routers info i figured this was the ip under the configurations summary that said wan ip, perhpaps i was wrong, i'm not sure but this ip info is static it does not change , but I believe the individual computers ip addresses use dhcp and are not static.

View 3 Replies View Related

Linksys Cable / DSL :: Anyway To Enable Telnet Access On WAG120n Modem / Router

Jul 18, 2011

I'm trying to find out if there is anyway to enable telnet access on the WAG120n modem/router .I can't seem to be able to find related info in the support web site for this device. Any info if telnet is even available ?

View 2 Replies View Related

Linksys Cable / DSL :: Can't Access Gateway Of WAG160N

Aug 30, 2012

I hard reset the router WAG160N and i can't access it on 192.168.1.1, i can connect to the wireless connection but it shows unindentified network, in properties gateway IP is absent. i also get 169.254.1.38 as IPv4.What could have happened to the modem, I can't use it at all at the moment?

View 3 Replies View Related

Linksys Wireless Router :: Set Up DPQ3925 Gateway Modem With Comcast?

Sep 21, 2012

I bought this wonderful voice gateway off the internet from someone. So not sure if they ever used it with Comcast.So far I hatve had no internet once I plug it to the cable. I have asked Comcast tech for activating this device. However they say it is not supported and they have tried sending it the Activation signal but they say it fails. I can see all lights lit up and go green when I connect this device to the cable, is there a firmware upgrade for DPQ3925 ? 

View 2 Replies View Related

Linksys Cable / DSL :: WCG200 Bridge Mode From Wireless-G Cable Gateway To Wired?

Mar 14, 2013

Our family has about three computers that use a wireless network that we all share. We have an old Gateway, a WCG200, that is bridged to an E2000, which was set-up ever since we required better security when someone used our connection to illegally obtain movies. We got a letter which warned us of any future violations that could cause legal action, so we looked into our wireless connection to better secure it from any other individuals outside of our household. The WCG200 is connected to the outlet in the wall via cable, and then connects from the Ethernet to the E2000. The E2000 has a stronger security setup than the WCG200, which is the advice we received from our ISP and would allow us to keep the Gateway. It provides a strong signal, but from time to time, we suffer latency or slow loading through all of our online devices, even though our connection speed displays a solid 72.0 Mbps. I've tried the Event Viewer to see any problems, and I have noticed some small things:

- WLAN AutoConfig service has successfully stopped.Wirel?

- WLAN Extensibility Module has stopped. Module Path: C:WindowsSystem32cmihvsrv64.dll

- The server {E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E} did not register with DCOM within the required timeout.

- Broadcom NetLink (TM) Gigabit Ethernet: The network link is down.  Check to make sure the network cable is properly connected. [This last one is strange, since I use the Wireless Network Connection with a DW1501 Wireless-N WLAN Half-Mini Card, while the Broadcom adapter is under the Local Area Connection and displayed as not connected.]

Other than that, I'm not quite sure what the recurring problem comes from. Our WCG200 has a firewall enabled and our E2000 has an SPI firewall enabled. The security mode of the E2000 is a WPA2 setup. We have disabled the wireless network of our WCG200 in order to make use of the E2000.

View 9 Replies View Related

Linksys Wireless Router :: Setting Up WDS On DPC3825?

Nov 4, 2011

I have a DPC3825 from Shaw Cable in Canada. I'd like to use my Airport Extreme as a repeater using WDS. I've clicked the checkbox for "Allow wireless signal to be repeated by a repeater" and entered my Airport's MAC Address, but my Airport Base station doesn't see it as a WDS Peer.

View 1 Replies View Related

Linksys Wireless Router :: E3000 Cannot Access Admin Via Cisco Connect

Apr 25, 2012

I tried all methods: Cisco Connect (on Vista), http and https, but none works. However, the router seems function correctly. My laptop can acquire DHCP address and browse via the router. But I just cannot connect to the router to perform Admin tasks.Problem: when I launch CiscoConnect: the GUI shows "Cannot access your router", even though I am using the router to browse the net wirelessly and wirely. Using browser to navigate to http://192.168.1.1 and https://192.168.1.1 also give me cannot access error!

View 1 Replies View Related

Linksys Wireless Router :: No HTTPS Access To Admin Interface On WRT160n V3?

Feb 16, 2012

I was unable to access the web admin on my WRT160n v3 w/ latest firmware this morning. Reset config to defaults & was able to get in. Enabled HTTPS access & disabled HTTP access & was right back where I started; reset to defaults again & left both boxes checked. Can access via HTTP, but HTTPS requests get refused/reset.
 
The reason I needed access was that when I booted up my laptop this morning, my wireless card wasn't picking up an IP address via WIFI, only worked via ethernet, so I need to see what was going on there — several reboots of the router didn't fix, nor has it fixed the HTTPS access problem described above. 

View 6 Replies View Related

Linksys Wireless Router :: WRT120N - Can't Access Admin Panel From Other Computer

Dec 16, 2011

Before, I can access admin panel of router via 192.168.1.1 on any computer, be it wired or wireless.This time, I can't anymore.This time, I can only access admin panel on 1 computer only. The computer in which it's directly connected to the router, wired. All other computers, connected to a switch, which the switch is also connected to router, can no longer access admin panel.I can still open 192.168.1.1 with a username/password prompt but I can't log in. It's like it's always wrong password. Same with accessing from laptop (wireless).Before, I can access admin panel from any computer (wired), even from laptop (wireless). There are times that I have to restart router in order to fix my internet connection. Only this time, I have to access it from the computer that's directly connected to router (wired).How do I revert it back so that all computers will be able to connect to admin panel of router?I have just finished upgrading firmware from 1.0.05 to 1.0.06 but I still have the same problem.

View 5 Replies View Related

Linksys Wireless Router :: EA6500 No Admin Access Until Physically Reboot

Nov 11, 2012

Just setup my new EA6500 router and while in general it seems to be performing ok I am experiencing some problems with the admin. It seems that frequently either via cloud or local i get the cannot find router message or waiting graphic which results me in having to manually reboot the router so that i can access the admin page again, The router still works fine but no admin access until i physically reboot. This kind of defeats the whole purpose of using cloud if just by accessing the router or making changes it leaves admin access inoperable!

View 9 Replies View Related

Linksys Wireless Router :: Unable To Access Cisco Admin Page For 54G V5

May 3, 2012

I moved. Runnig an iMac at home. Can connect to the internet but was not able to access my cisco admin page for 54G V5.  Also need to connect VPN but unable to. 

View 1 Replies View Related

Linksys Wireless Router :: E1200 - How To Access Router Admin Page

Apr 1, 2012

I want access the my E1200 website in order to implement new username and password to secure the network.

View 1 Replies View Related

Linksys Wireless Router :: DPC3825 - How To Reset A New Password

Jan 9, 2013

I got a problem with my router CISCO (DPC3825) where the eithernet is working properly and the wireless is not, and I had to plug the usb to make the setups, and suddenly the wireless was working but when I tried to reset the password something worng happened change the set of the wireles

View 2 Replies View Related

Linksys Wireless Router :: WRT610N V2 Access Restrictions Menu Is Missing In Admin Gui

Nov 18, 2011

I 'd like to use the access restrictions capabilities of the WRT610N v2. Unfortunely the "Access Restrictions" menu is missing in the admin GUI; I 've got all the others : "Set -up", "Wireless", "Security", Storage, Applications and Gaming, Administration and Status. I've checked the Firmware already and i'm using the very last one available on the cisco web site. I also noticed that I do not have the "Linksys by Cisco" text on the upper left corner as one can read on user guide but just "Cisco".

View 5 Replies View Related

Linksys Wireless Router :: Can't Access Admin (browser Based Utility) On E350

Jan 10, 2013

I'm trying to access the browser based utility (@ http://192.168.1.1) on my router and having no luck.  I've tried from two different computers (each Win 7) and each browser.  I've tried wired directly to the blue/LAN ports and through Wifi.  I've confimred that the IP is correct (or is at least the default gateway for each machine).  The Cisco Connect tool can't find the router either.the only thing that can find the router is the CiscoConnect Express app on my iPhone.Internet is working fineish (some problems with Wifi), I just want to play with some settings.

View 1 Replies View Related

Linksys Wireless Router :: WRT120N Can't Access Web Based Admin Screen From Firefox 7.0.1

Oct 29, 2011

I have a WRT120N with Firmware 1.0.06..First peculiarity is that I can't access the web based admin screen from Firefox 7.0.1.  The password prompt appears but won't proceed from there.Second, and main issue is that frequently (several times a day) I get a 'Limited Access' error on my wireless connection.  On mouse roll over Windows 7 Pro gives the error message 'no internet access'.  This problem appears to resolve itself after several minutes or straight away if the router is powercycled.  During these 'Limited Access' moments I am unable to connect to the route web based admin page nor ping or tracert. [code]

View 8 Replies View Related

Default Gateway Switches To Cable Modem?

Apr 28, 2012

Lastnight I power cycled my cable modem, and router in an attempt to get a Slingbox to work. What ended up happening is that after the modem and router came back online all the computers on my wired home network changed their default gateway to the IP of the modem and not the router. Two of the computers are fixed now, but one of the laptops is still not able to get to the internet using DHCP. I can use a static IP with the correct default gateway for the router, and succesfully get to the internet, but then I can't see my server on my netowrk. And the same is true in reverse, in order to see my server I have to go back to DHCP, but I can't get on the internet

View 1 Replies View Related

Linksys Wireless Router :: Cisco DPC3825 - Signal Booster

Apr 29, 2013

Just got a Cisco DPC3825 from my ISP. I need to connect my other desktops to the wireless router all over the house and have two questions.
 
1. What is the best wireless adapter to use so my other desktops will be able to access the router?
 
2. What is the distance of signal before I need a signal booster and if I do need to boos the signal, what is the best device to do that? (we stream video, music, light gaming and general internet applications).

View 2 Replies View Related

Cisco WAN :: 2611 - Connecting Home Lab Router To Cable Modem Over Wireless Access

Mar 11, 2012

My home lab is in a different room than the cable modem.  I have a wireless N router in the room with the cable modem.  I have a wireless access point that is connected to a Cisco 2611XM routers fa0/0 interface.  The 2611 accepts the DHCP address from the wireless router.  However, I can't ping past the wireless LAN 192.168.10.0 network. I know with the wireless router it's two layers of DHCP.  Should remove  the DHCP settings from the wireless router?  The wireless router is a  TrendNet TEW-651BR.  I can ping my iphone or any device conntected to the wireless router.  And my laptop can ping default gateway of the wireless router, which I assume is the cable modem, however the 2611 cannot.  So I'm assuming that's why the hosts behind the 2611 can't get to the internet.  I followed the below instructions.   I know the instructions don't assume your using a wirelss router between 2611 and the cable modem.  But, I really don't want to run a cable to the cable modem. 

[URL]

View 5 Replies View Related

Linksys Wireless Router :: DPC3825 - Network Connection Fine But No Internet

Dec 17, 2012

Recently installed a new CISCO DPC3825 and set up for wireless.  I can connect to the network, signal strength excellent, but   NO Internet.  i have read a few threads showing similar issues, but i am getting lost when i try to troubleshoot further.  i ran a command 'ipconfig/all' and got some data. I am confused also as under my network adapter it says 'media disconnected' .

View 1 Replies View Related

Modem Assigning IP Instead Of DPC3825?

Aug 26, 2011

I got a new modem today (a Cisco DPC3825) and it seems to be presenting a problem. I used to be able to simply and quickly change my IP address, by changing the MAC address though my Netgear router. Now when I do that, I can see the IP address has changed in the router settings, but when I double check it using ipburger.com, the IP address does NOT actually change, but remains the same.

View 4 Replies View Related

Linksys Cable / DSL :: Can't Get A New IP From ISP When Cable Modem EPC3925 Is Set To Router Mode

Mar 23, 2012

I can't get a new IP from my ISP when my Cable modem router(EPC3925) is set to router mode, i have tried factory restore, unplugged etc..but still no luck. It changes each time i reset it when i set it to bridged only mode but then i won't be able to connect other devices to it since it doesn't uses DHCP in bridged only mode. It changes back to the IP i had when i set it to router mode. I don't want to change my router settings to bridged only because it would disconnect the other devices in my house. Why my ISP assigns the same IP address when it's set to router mode but assigns different IPs when it's set to bridged only, how is this possible ?

View 1 Replies View Related

Linksys Wireless Router :: DPC3825 - When Connect To Online Video Game Getting Mini-disconnects

Feb 1, 2012

I have  CISCO DPC3825 router and theres about 3 computers and 2 wireless devices using internet through it.  When i connect to a online video game I get these mini-disconnects.  It happens periodically and frequently I'm not sure what is causing it.

View 1 Replies View Related

How To Connect Ubee Wireless Cable Modem To A Linksys Router

Jan 11, 2013

how to i connect mu linksys router to my ubee cable modem

View 2 Replies View Related

Linksys Wireless Router :: WRT54G2 Disconnecting From Cable Modem

Jun 10, 2011

Our router is connected through a cable modem and If I connect my computer directly wired to the cable modem, I have no problem, it does not disconnect at all.In comes the router in between, when I connect the router and connect my computer through the router WRT54G2, it works initially then I get disconnected after about 1-2 hours.  This is very regular.  I have a temporary solution by resetting the router via two ways:
 
1.  Go to the admin page, and perform a release and renew IP method.

2.  Simply power off the router and then on again.

View 3 Replies View Related

Linksys Wireless Router :: EA2700 Not Recognized By Cable Modem?

Feb 24, 2013

I have an EA2700 (fimware "classic" 1.0.14.129982) that used to work perfectly fine with a Comcast cable modem.  I just recently switched to Charter with an Arris TM902 modem and that's where the problems started.  The cable modem will not recognize my router.  I have to plug in a computer into the cable model when it starts up.  Then I need to clone the MAC address and restart the router (after disconnecting the computer).  Why isn't the cable modem recognizing the router when I restart it?  I guess this could work if it would be a one time thing but I had to power-cycle the modem and it stopped recognizing the router even with the cloned MAC address.  So I had to do the whole spiel again.
 
Is there any way to make this work easier?  Should I update my router's firmware to the "smart" one?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved