Linksys Wireless Router :: E2500 Cannot Connect To Setup Page

Apr 21, 2012

I can't connect to my setup page [url]... I get to the page that says..."There is a problem with this website's security certificate." Then I click the "continue to this website (not recommended). After this it will not connect 
Tried with IE9 and Firefox 11
Firefox says "The connection to the server was reset while the page was loading."
Internet still works. PC is connected directly to router. Tried different port on router. Tried installing CiscoConnect.E2500.1.4.11299.0,0, but it fails saying there is no router connected to PC. Like I said I am on the PC now, wired to router and have internet access via cable modem connected to router. I can see my ireless printer on the network also..

View 2 Replies


Linksys Wireless Router :: E2500 - Page Not Fully Loading

Mar 24, 2013

It's' my first router (E 2500) one desk top and two laptop and also a Ipad connected, every thing look fine exept for the Ipad.Lots of page not fully loading, I have to reload couples of time to get it full load. and lots of Youtube video said not presently availale but work fine with laptop or desktop.Did not change any seting on the router, I just plug it and used it

View 9 Replies View Related

Linksys Wireless Router :: Setup A WAP With E2500?

Jan 23, 2012

I am trying to setup a WAP with my linksys 2500. I am currently using a Gateway connected to my DSL and am looking to set up the access point through the E2500.

View 1 Replies View Related

Linksys Wireless Router :: How To Setup Slingbox AV With E2500

Jul 31, 2011

I just purchased a new E2500 and I am unable to setup internet viewing with it.  I have went in and done the port  forwarding and still I have not had any success.

View 1 Replies View Related

Linksys Wireless Router :: Setup E2500 With Slingbox Solo

Sep 22, 2012

Slingbox no longer uses software, but is now web based. I got a new computer and when I go to the site it can't locate my slingbox on their network.
When I go to the site and sign in, it loads the application but then scolls as it looks for my box on the network until it times out. Slingbox directory shows my slingbox, but it says unconfigured.
I called tech support, where I was told my 90 days for free support had expired 2 weeks ago.  The port forwarding instructions I found on the internet made references to going into the router and selecting port range forwarding and have start and end port of 5100 and then enable that port.
When I go to support on the slingmedia page, it displays my slingbox with Slingbox status alert, software warning.   Instructions state go to slingmedia site and look for update, but if my box is not on thier directory, I can't download update.
Slingbox Info
Slingbox Name: My SlingboxSlingbox ID:XXXXXXXXXXXXXXXXXXXXXXXXX9B30Slingbox Software Version: 1.2.18
Internet Viewing
Set Up Complete: YesSlingbox Public IP Address: XX.XXX.X.228Slingbox Private IP Address: XXX.XXX.X.237Slingbox Port: 5001
Slingbox Access Info
Activation Date: 11-09-2007Date Last Accessed: 02-08-2009

View 9 Replies View Related

Linksys Wireless Router :: E2500 - Cannot Access Password To Setup

Oct 31, 2012

E2500 given to me cannot access password to setup

View 1 Replies View Related

Linksys Wireless Router :: E2500 Is There A Setting Or Setup That Needs To Be Changed

Feb 17, 2012

I had to change from a WRT300N wireless router which died to a new E2500.  I noticed that the speed my computers report that they are connected to the wireless network connection is now 144.5 mps, versus 270 mps with the WRT300N.  There is no change in location of the devices or computers.  The computers use a WUSB300N adapter.Is there a setting or setup that needs to be changed?

View 2 Replies View Related

Linksys Wireless Router :: E2500 - Way To Setup In Bridge Mode?

Sep 14, 2011

I just bought an E2500.  Wanted to set it up in bridge mode.  I can't seem to find any way of doing this.Cisco Knowledge Base article # 4194 shows what I am attempting to do.

View 1 Replies View Related

Linksys Wireless Router :: EA-4500 Can't Login Into Setup Page

Oct 26, 2012

I'm trying to login to my EA4500 setup page. I have the "cloud connect" firmware and when I'm redirected to the "Linksys Smart Wi-Fi" page in my browser, I attempt to login as usual.It accepts my login name and password, and then I get a page that has a rotating graphic and it says "waiting..." It eventualy times out and takes me back to the login screen. I've tried to reboot my router and that doesn't work. I've also disconnected the internet connection from the modem, and entered the router main password, and that gives me the same response as if I tried to connect via the cloud.

View 9 Replies View Related

Linksys Wireless Router :: Cannot Access WRT54G Setup Page

Jan 19, 2013

I have a WRT54G router that I have not used for many years, but now I need to use it again. I have connected it between my modem and PC, and I am able to get an internet connection on the PC, but I am unable to connect to the router's configuration page. I have tried resetting the router numerous times (holding the reset button 5 seconds, 10 seconds, even longer) to reset the IP address to the default address, but still cannot access the page. The power LED is on and the WLAN and Internet LEDs are on, and the LED for the port my PC is connected to is on. The hardware version of the router is v3. I tried downloading the latest firmware, but without being anble to communicate with the router at the IP address I cannot update the firmware. How can I go about connectiong to the router's setup page? When using ipconfig, the Default Gateway appears to still point to my ISP's IP address instead of the router's.

View 9 Replies View Related

Linksys Wireless Router :: Can't Access WRT160n Setup Page

Oct 16, 2012

I have updated the WRT160n firmware and, since then, I couldn't access the setup page anymore. I could still use the router as a switch, but couldn't access the setup page and configure it as a router.

View 5 Replies View Related

Linksys Wireless Router :: Cannot Access E1200 Setup Page

Nov 29, 2012

I'm able to connect to the internet through my E1200 router but I cannot access the router set up page. doesn't work... I can connect to it just fine with my laptop however... so I changed it to as per some internet instructions. Still can't connect via my desktop... Tried ipconfig /flushdns to no avail. Cleared the internet cache Upgraded the firmware (via the laptop) rebooted the computer rebooted the router... reset the router... After rebooting the router I can type in the username and password to access the router, but it never connects....

View 6 Replies View Related

Linksys Wireless Router :: Can't Access Setup Page WRT54GS

Sep 9, 2012

I need to set up a password for my wireless network, but every time I try to access the setup page, the router stops responding.  I've gotten as far as it asking for username and password, where I enter admin as the password....and then nothing.  The connection times out.  I really need to protect my network.

View 1 Replies View Related

Linksys Wireless Router :: E4200V2 Can't Get To Advanced Setup Page

Apr 3, 2012

I just installed new E4200V2.  After completing software install, everything appears to be working fine, except that I can't get to the advanced setup page, either through Cisco connect software or from the web page utility.  Either way, the advanced settings web page never finishes loading.  I am using the correct login information for the web page utility.  It accepts the username "admin" and password, but never loads.  Browser just sits there.  Browser status bar says "waiting for 

View 3 Replies View Related

Linksys Wireless Router :: WRT54G - How To Access Setup Page

Apr 27, 2012

When I had DSL, my WRT54G was my DHCP master for my home network.  When I got AT&T U-Verse, their "gateway" became the DHCP master and also the wireless access point.  But the signal was not strong enough where I wanted to use it, so I hooked up the WRT54G again.  I discovered that if I connected the U-Verse gateway to the "Internet" port on the WRT54G Linksys, then my home network was split in two, which I did not want.  The WRT54G access point is physically somewhat distant from my wired computer, so I wanted to keep the U-Verse gateway as the DHCP master. (The U-Verse gateway is a router with four "computer" ports but no "Internet" port.)
I followed instructions on the Linksys web site, and using my wi-fi connected computer I re-programmed the WRT54G to be "Disabled" as a DHCP server.  Then I powered down and physically connected the U-Verse gateway to a "Computer" port on the WRT54G.  This solved my problem:  my distant wi-fi computer now has a good signal, and both computers "see" each other.
However, now I seem to have lost access to the WRT54G setup "web page."  Is it possible to access the innards of the WRT54G when its DHCP service is disabled?  Or would I have to reset the device to factory configuration and start all over if I wanted to make any tweaks?

View 3 Replies View Related

Linksys Wireless Router :: 1721 - Can't Access Setup Page

Jul 11, 2012

My internet is T1 by Verizon. My mom's company Siemens pays for our internet because she works from home as medical tech support on the phone. Okay so the T1 had to be laid out to our house underground I think because where we live, other brands of internet aren't available. The T1 goes from the box outside into our basement and hooks up to a Cisco 1721 modem. From the 1721 the internet goes out to a wireless router that is sitting right next to it. This wireless router is a Linksys WRT160N V2. We have several cables coming out of the WRT160N V2 to go to the first floor for hardwired connections, but one cable goes to the attic and connects to a second wireless router. The second wireless router is a Linksys E2000. We have several cables coming out of the E2000 that go to the 2nd floor to serve as hardwired connections.Okay so let me explain where things went wrong.

After a storm our power went out. Eventually the power came back on, but every now and then our internet would shut off for like half a day then turn right back on, so our internet was getting really really spotty. The [b]AL[/b] light on the Cisco 1721 would come on every time the internet went out. It was so bad that my mom had to get an aircard from verizon to get internet. So after two weeks of spotty service and arguing with verizon trying to get them to come fix the problem, they said try resetting your wireless routers because they might have "bad data" in the lines causing spotty connection. So we reset the wireless routers by holding down the reset buttons on the back. Well.. this reset all of the settings for the routers which Cisco facilitated set up, and now our wireless routers are out of warranty date so they can't set the wireless routers back up. However, we have copies of the online wireless router set up page, so we thought maybe we could just set them up ourselves.Well the problem is... We don't know how to connect to the wireless setup pages.. I read something on the internet about setting up wireless networks and to type into our browser(Mozilla Firefox) and that would bring us to the wireless setup page. But the page does NOT ever come up.

Another way to find the IP address of our wireless routers would be to try going to the cmd and typing in ipconfig and using the Default Gateway IP address for the browser to connect to the setup page but that doesn't work out either.... Right now I unhooked the Linksys WRT160N V2 and hardlined the Cisco 1721 to the Linksys E2000 to a PC on the second floor because I figured it wouldn't work out if we had two wireless routers running at the same time. Currently the browser is taking me no where at all. It just says "Connecting..." but nothing is loading up at all.I tried hardlining from the Cisco 1721 to my mom's laptop, which is her work computer, and I got no response at all. I figured it might just be her work computer that was messing up and not allowing her to hardline into the 1721 so I tried hardlining the Cisco 1721 straight to the PC desktop on the second floor(we have no other laptops other than my mom's work laptop) and nothing went through. Then my dad says the Cisco 1721 has been configured so it doesn't direct connect, meaning that it has to go through a wireless router.

View 4 Replies View Related

Linksys Wireless Router :: How To Setup TPLink / TD-W8101G With Cisco E2500

Jan 15, 2012

I have IBM X3200 M3 ( with onboard 2 LAN ) not connected into internet,tplink modem router + wireless ( ADSL MODEM )--->cisco E2500---->ibm x3200 m3( ubuntu )

View 8 Replies View Related

Linksys Wireless Router :: Need Access E1000's Web-based Setup Page

Jan 6, 2012

I have a Linksys E1000 wireless router, and I seem to have either written down the password incorrectly or am using the wrong one. Regardless, I can not access the web-based setup for the router. Is there anyway to reset the username and password for it?

View 3 Replies View Related

Linksys Wireless Router :: Wrt54g2 - No Access Through Wifi To Setup Page?

Jul 16, 2011

I bought wrt54g2 several years ago and everything worked fine until this week. I got trouble with this router now.All the computers at my home couldn't access to this router even just connect to router's setup page at The only way go to setup page through LAN Cable .I'm afraid maybe there's interference channel with my neighbor, then I did some change to router channel already, but the result same. I still couldn't access to the router through WIFI
Fyi, I did upgrade the firmware with the latest one and all the computers distance to the router not more then 5 m and in the clear area

View 6 Replies View Related

Linksys Wireless Router :: E4200 Accessing Modem Setup Page?

Dec 4, 2011

if it is possible to access a modem setup page with a E4200 router? My router is on and modem(WAG-200G) is on, ethernet cable is on internet port on the e4200 and on port1 on the modem. Modem is set is bridge and I set up a ppoe and dhcp on router. Everything is ok, except that i can not access modem setup page to see adsl conection speed and settings.

View 1 Replies View Related

Linksys Wireless Router :: E2500 Showing 5 Bars But Not Found In Setup Process

Sep 27, 2011

I have used wireless routers in the past...but have just purchased a Cisco E2500. When attempting to set it up using the CD I am asked to assign name + password.....I do this and but the ?? is unable to find the router. This despite the fact that it is 8 ft. away and showing up with 5 bars on my networks available display. When I attempt to connect without going thru the setup it asks me for the password which is part of the setup process..

View 3 Replies View Related

Linksys Wireless Router :: WRT54G V8 / Unable To Navigate The Basic Setup Page

Jan 14, 2008

I have been trying to change my password and all the settings on my WRT54G V8 router today because I forgot the password, and I can't seem to navigate the Basic Setup page. I can log in (most of the time) after resetting the router, but whenever I try to click on a different tab (like "Wireless", or "Security") it comes up with the page saying "This Page Cannot Be Displayed."  I'd like to be able to put a password on it (which I have successfully done before on this router) because I live in a college dorm and would like to keep my internet from being bogged down by other people using it. 

View 9 Replies View Related

Linksys Wireless Router :: WRT310N / Accessing Configuration Web Based Setup Page

Apr 9, 2012

I have Verizon FIOS internet/wireless router and then a WRT310N wireless router connected to it thru Ethernet cable.  I want to disable DHCP in the Linksys, but when I try to access the set up page at address the Verizon router set up page shows up.  I've tried to connect the router directly to the computer, but it needs the internet connection from the Verizon router.  How do I get to the set up of the Linksys at the same time the Verizon is using the same address?

View 5 Replies View Related

Linksys Wireless Router :: WRT160N - Upgraded Firmware Now Setup Page Won't Open?

Aug 7, 2011

I was having problems with the speed being between 30-58 kpbs when going through the WRT160N router, whether its hooked up wired or wireless, the speed with both was extremely slow and wouldnt fully open pager or would take dsl day slow. I hooked up straight to modem and I got 100+ kpbs so I figured its not my ISP, so I read that upgrading my firmware might make it faster, so I upgraded and hit and held the reset button for 30 secs like it recommended but now the wont open, I get a message saying it cant open this page

View 4 Replies View Related

Linksys Wireless Router :: E900 - Upgraded Firmware / Changed IP Now Cannot Access Setup Page

Jun 6, 2012

I bought E900, accessed setup thru, upgraded its firmware.. then changed router's IP, it reboots, then went blank, I cannot access the setup page anymore?

View 9 Replies View Related

Linksys Wireless Router :: E3200 - Cannot Access Setup Page Wireless Or Wired

Nov 7, 2011

I finally decided to go with a e3200 yesterday and picked up one at Walmart. Last night I went to hook it up and had no luck setting it up. Now I have able Internet with a phone VoIP service. After trying to connect several ways, all the router wants to do is sit with a flashing power light. I cannot access the setup page wireless or wired and have tried several methods I found last night.

View 1 Replies View Related

Cannot Access Router WRT54GX Web Page / Setup Page?

Jul 28, 2011

i need to get into the web page because i need to open my XBL nat and when i type in the password to get into the routers page i get a blank screen

View 2 Replies View Related

Linksys Wireless Router :: E2500 Can't Connect All Devices

May 3, 2012

can't connect all my devices like an Iphone, Nook or another computed to the wireless network with the e2500, we have three devices but the others can't connect.

View 3 Replies View Related

Linksys Wireless Router :: E2500 - Cannot Connect With Hp Laptop

Jul 31, 2011

I install the E2500 router with my modem. it works fine with other compaq desktop and gateway laptop. But the HP Pavilion dv6910 can not get online. I try my hp laptop at starbuck shop, and it work fine.

View 3 Replies View Related

Linksys Wireless Router :: Can't Connect With Modem Through E2500

May 9, 2012

I have an old Speedstream 5100 modem hooked to my e2500 router. Everything works well except if for some reason my modem disconnects from ISP I can not log into it through the route to reconnect it. I must plug a direct cable into modem from computer run connect script then plug modem back into router all is fine again.
why connecting to modem through router is blocked?

View 9 Replies View Related

Linksys Wireless Router :: Connect WAP54G To New E2500?

Jan 19, 2012

Is it possible to connect my WAP54G to my new E2500 router?
I previously had a WRT54G and had my WAP54G connected to it in AP Client mode.  This enabled me to have internet access on my desktop computer that is located in another room downstairs.

View 2 Replies View Related

Linksys Wireless Router :: E2500 Won't Connect To Internet?

Aug 1, 2012

I installed an e2500 to my cable modem and everything went perfect. Then 2 weeks later the electricity went off for some power company upgrades. when the power came back on the modem wouldnt connect. I have been through every solution in the cisco articles. The computer connects when directly wired to the modem, so I know there is signal. When I place the router into service and use the ethernet connection  the modem no longer displays the active internet led. The e2500 ethernet led to the computer lights and the power led. The Ethernet led from the modem to the router doesn't light. I did a complete reset on the router. The setup software only runs to 75% complete then stops and tells me to check the plugs. Ive checked, replaced and swapped the cables. I've set the MAC to clone, and verified the MAC address via ipconfig. Ive done the complete powercycle at least 20 times.

View 3 Replies View Related

Linksys Wireless Router :: E2500 Cannot Connect To 360 Using 5ghz

Jun 27, 2012

I've found a few people with this problem on the internet.  I'm using my phat 360 with the black N adapter.  e2500 is updated to the latest firmware.  But my 360 cannot connect to the 5ghz N, only 2.4ghz g.  The wierd thing is that the 5ghz signal gives a better signal than the 2.4ghz.
I just found a thread on google talking about the e4200 and someone mentioned counterfit  adapters and problems with them.  I did buy this on ebay for a cheap price, so it looks like it was too good to be true.  this is a counterfit? It does have a real hologram on it.


If this is real, what else could be the problem.  Has the firmware not been updated to support the 360?

View 6 Replies View Related

Copyrights 2005-15, All rights reserved