Linksys Wireless Router :: EA2700 / 3500 / 4500 Access Restrictions

Jun 29, 2012

I can't find info about Access Restrictions in new series of routers.[URL]Do new routers have both Parental Controls + Internet Access Policy? I need this [URL]

View 2 Replies


ADVERTISEMENT

Linksys Wireless Router :: E1200 - Access Restrictions Change To Access Policy?

Feb 25, 2013

What happen to my router linksys e1200, after i update the firmware to the latest version "Access Restrictions" is change to "Access Policy". how can i revert it back to "Access Restrictions" do i need to downgrade the firmware? 

View 2 Replies View Related

Linksys Wireless Router :: Access Restrictions On WRT600N?

Oct 30, 2011

I'm having problems with the access restrictions feature on the WRT600N.  I do have the latest firmware upgrade, which was released in 2008 I believe.  Anyways whenever I totally block a PC from the internet either by MAC or by IP, it affects the internet on the rest of the house.  Logins to sites do not work right.  Logouts from do not work right.  Different features of different sites will not work properly.  There also will be a lag sometimes when entering the url for a new site.  But as soon as I turn the access restriction off, everything goes immediately back to how it should be working. 

View 3 Replies View Related

Linksys Wireless Router :: E3000 Access Restrictions?

Feb 22, 2012

I have access restrictions set up for certain wireless devices in my home that the kids use to kick them off at 11 pm and keep them off all night. where I am running into a problem is I want to block these same devices from downloading anything without my permission  my son downloads everything he sees, Comcat has already threatened to kick us off their service if we go over 250 gb bandwidth use  in a  month again. so I want to configure something in the router that will block all downloads for specific wireless devices. with the access restrictions I have set up I used the mac address not just the ip so they have no way around it I constantly monitor what is connected. I am using the stock firmware as well

View 1 Replies View Related

Linksys Wireless Router :: WRT120N Access Restrictions Tab Is Missing

Jul 24, 2012

I decided to limit some Internet time for the kids going off this router (which has been working great since set up) but my Access Restrictions tab is missing.  I have an identical router at my work place, same version/firmware, same settings, but the one at work does have the tab.

View 6 Replies View Related

Linksys Wireless Router :: Can't Get Access Restrictions To Work WRT54G V3

Nov 24, 2011

I am trying to get a cell phone to have access to my LAN from 3am to 7am.  I gave the policy a name, allowed access, checked everyday and the time 3a to 7a.  Under edit list of PCs, I entered the MAC address of the phone, and I have also entered the MAC address of the phone on the wireless>edit mac filter list, though didn't know if I should.

View 2 Replies View Related

Linksys Wireless Router :: Wrt54g Access Restrictions For Time?

Sep 2, 2011

I keep trying to set access restrictions for my wrt54g router for time. There is no 12 for time so I'm selecting 11:55 pm to 6am but I keep getting an error message of, "end time must be bigger then begin time." I get this no matter if I select 9pm, 10pm, etc.

View 3 Replies View Related

Linksys Wireless Router :: WRT150N Access Restrictions Not Working

Apr 3, 2011

I am using a WRT150N with firmware v1.00.5. I have a Linux setup with Squid connected to the network with the gateway 192.168.23.254. The WRT150N has a gateway of 192.168.23.1. The WRT150N is also connected to an Apple Base Station which serves as the Access Point for WiFi users.Squid limits access for IP addresses listed under the .254 gateway. But once I change my gateway to 23.1, everything is accessible. I want to block sites as well on the WRT150N. But every time I try to put a new Access Restriction, it doesn't work.

View 4 Replies View Related

Linksys Wireless Router :: Access Restrictions On Current E2500?

May 28, 2012

I have an old WRT54G and the access restrictions really don't work.  it's sloppy and ineffective.
 
i'm thinking about upgrading... perhaps to the E2500.  Do the access restrictions now work properly?  Am I able to allow access to a specific site only during certain times?
 
For instance, am I able to provide access to [URL] only during 6:00pm-9:00pm and block it otherwise?

View 6 Replies View Related

Linksys Wireless Router :: Set Colliding Access Restrictions In Wrt610n?

Sep 14, 2011

I want to set up access restrictions to one MAC address (my kid's machine) basing on week days. From Su to Th allow less access time while during Fr-Sa afternoons access time should be longer. The question is how to program it in router. I know I can set rules with "allow" and "disable" keyword, but I don't know rules preference. When I set (Su-Th 6-21) allowed access time then router automatically denies defined machine internet access outside this time range. The problem is in the power of thus calculated denying time. I want to allow more access time in weekend, so I hoped if I can simply add "Fr-Sa 6-22:30 allowed access time" rule. I hoped that router will regard explicitly set time over inexplicitly set  time but it appears it is not so. What are their preferences/priorieties, iis it possible to stack more rules affecting one MAC address or it is so simple that the first rule "rulez"? Is it possible to set more than one time rule affecting the one machine?

View 4 Replies View Related

Linksys Wireless Router :: E1200 V2 / Getting Error Access Restrictions

May 15, 2012

I had a E1200, I read the articles from the support about the routers, I think the "access Restrictions" has more flexible to setup on for the parental control, after chated to cisco support person online, I was told that the E1200 v2 has this "access restrictions" function, and I wan convinced to purchase from them. I did. I got the E1200 v2 recently, however, after I installed the CD and found there is no "access restrictions" tab, instead the "access policy" is still there. by the way the firmware is 2.0.02 now. How to get the "access restrictions" from setup? I've chatted with cisco support person twice again, but nobody can fix the problem, one suggested to restart and reinstall the CD. I uninstalled the software, restarted the computer and reinstalled the CD. same problem, no tab of "access restrictions".

View 6 Replies View Related

Linksys Wireless Router :: Access Restrictions Option Does Not Exist On WRT160Nv3

Jun 14, 2012

Access Restrictions option does not exist on my WRT160Nv3 Broadband Router Setup Page and I need to use that option.

View 2 Replies View Related

Linksys Wireless Router :: WRT160Nv3 - Set Up Access Restrictions To Allow Only Specific Websites?

Sep 12, 2012

Possible to set up access restrictions to Allow only specific websites?

View 1 Replies View Related

Linksys Wireless Router :: E1000 - Restrictions To Access Download Sites?

Aug 25, 2011

How do I restrict wireless user from accessing download sites that slow my network?

View 1 Replies View Related

Linksys Wireless Router :: WR54G Disconnects XBox After Access Restrictions

Apr 18, 2013

Recently switched from WEP to WPA2 on the router and let it run a few days.  Everything was copacetic.
 
Then decided to implement the following access restrictions:

1 - Target MAC based, internet blocked from 9-11:55 PM (why won't it let you block from 9PM-7AM  ;-(  ), blocks son #1's laptop, Kindle

2 - Target MAC based, internet blocked from 10-11:55 PM, blocks son #2's Kindle

3 - Targets IP Address range based (192.168.1.0 - 192.168.1.254), across all devices blocks several porn sites all the time
 
I can get on a play games online but when we start watching video with all 3 restrictions enabled, it will eventually disconnect (can take 1-5 minutes before it happens).  Rebooting XBox usually reset connection, but it would happen again eventually.  After disabling all restrictions, disconnects completely stopped.
 
Is it not possible to have Access Restrictions in place on a WR54G and still stream video?

View 1 Replies View Related

Linksys Wireless Router :: E4200 Access Restrictions / There Is No Policy To Choose

Apr 23, 2012

I setup E4200 good.  But, in Access Restrictions, there is no policy to choose from.  Just Parental controls only.restore the Internet Access Policy like the good old routers?

View 1 Replies View Related

Linksys Wireless Router :: No Internet Access With EA2700?

Apr 24, 2012

I recently purchased an EA2700 to replace an old Belkin. I ran the set up CD and I am unable to establish an internet connection. I am able to connect to the router (both wired and wireless), ccess the settings, etc but cant reach the net. I've tried turning off the firewall, flushing the DNS, disabledthe IPv6. Did all the basic steps, resett the modem/router, etc...nothing. i hook the Belkin up and it connects just fine

View 9 Replies View Related

Linksys Wireless Router :: WRT610N V2 Access Restrictions Menu Is Missing In Admin Gui

Nov 18, 2011

I 'd like to use the access restrictions capabilities of the WRT610N v2. Unfortunely the "Access Restrictions" menu is missing in the admin GUI; I 've got all the others : "Set -up", "Wireless", "Security", Storage, Applications and Gaming, Administration and Status. I've checked the Firmware already and i'm using the very last one available on the cisco web site. I also noticed that I do not have the "Linksys by Cisco" text on the upper left corner as one can read on user guide but just "Cisco".

View 5 Replies View Related

Linksys Wireless Router :: No Internet Access Without Replugging WAN To EA2700

Feb 2, 2013

Every time after the router (Linksys EA2700) is powered off and restarted, there is no interent access available. The router configuration status reports an Internet Address of 0.0.0.0 and all the devices at home are left with a wifi without Internet access. I have to unplug the WAN from the router and plug it in again while it is turned on to restore internet access (and a normal Internet Address is seen from the status page). The WAN works fine with the routers I had previously. I wonder if I have to perform this every time I power on the router. I have tried resetting the router and reinstalling Cisco Connect but that didn't work.

View 3 Replies View Related

Linksys Wireless Router :: Unable To Access Using Cisco EA2700

May 7, 2013

I have a Cisco outer EA2700 connected using a Lan cable, Lan cable works fine as I connected it directly to my PC, I am unable to access wifi network connection, I am able to search the router and also able to cnnect to the router, But wireless connection shows limited or no connectivity, and unable to access any websites. It was working fine till yesterday, I tried rebootng ad also unplug and replug the network cable also reset the router but does not work

View 1 Replies View Related

Linksys Wireless Router :: EA2700 Access Forwarded Ports From LAN

May 3, 2013

I have a domain name which I register to my WAN address so I can do service hosting from my home network.  I recently switched out my WRT54G running DDWRT with an EA2700.  I set up my port forwards and static dhcp assignments and they are working from outside my network, but when I try any network operation involving my WAN address from my LAN machines, the connections just timeout.
 
I read in some posts that "you cannot do this" and "you have to test from a remote internet machine".  Well, this WORKED with DDWRT, so it's not like it's impossible to make a router that does this.  Why can't I do this with the EA2700?  Is there some magic setting that will let this work??
 
The whole point of using a domain name is that I can access my services ANYWHERE using the convenient "name" thing.. genius, right?  Except when I bring my laptop home and suddenly my domain goes non-responsive.

View 4 Replies View Related

Linksys Wireless Router :: Not Allow Devices To Access And Make Changes To EA2700

Jan 17, 2013

I have an EA 2700 installed using a wired network. It is just one desktop computer and a VOIP box shared by my internet connection. I am quite new at wireless connectivity.I would like to add wireless devices, specifically a phone and a laptop, but I do not want ANY of the wireless devices to be able to access and make changes to the ROUTER or any other computers on the network. I do need to keep the network secure.How do I set the router and/or devices up to accomplish this?

View 9 Replies View Related

Linksys Wireless Router :: EA6500 / Enable Parental Controls Or Access Restrictions To Block MAC / IP Address?

Mar 13, 2013

I have been looking into this router, I would like to know if I can enable Parental controls or access restrictions to block a MAC or IP address; from 03:00 AM - 06:00 AM ?Instead of Midnight to 6:00 am.My E4200 works just fine, Just would like to know if the EA6500 Can do that ?

View 7 Replies View Related

Linksys Wireless Router :: EA2700 Port Forwarding To Remote Access IP Camera?

Feb 7, 2013

I am wanting to access my IP camera over the Internet. I am not a computer wiz by any stretch and after a couple of failed attempts. My ISP is Comcast and they say that I have dynamic dns and should have no issues viewing my cameras. I know how to get to the port forwarding area of the router but am confused as to which ports to forward. The set up instructions for the camera (Airsight) suck. Screen shots of the set up don't match the actual router

View 7 Replies View Related

Linksys Wireless Router :: EA2700 Signal Dropped To 5 Mbps / No Internet Access

Dec 8, 2012

I've had this router for about 3 weeks.  It's only 20 feet from the computer, but my computer on 2 or 3 separate days had trouble staying connected.  The signal dropped to 5 Mbps and had a little yellow symbol that said no internet access and when I looked at the properties it said, "limited or no connectivity."  I got impatient and purchased a 75 ft Ethernet cable online with plans to possibly return the router as I don't really need wireless anyways and since I spent $100 on this router I expect it to work at 20 ft distance.
 
For the last few days it has remained at 54 Mbps or more sometimes all the way up to 108 mbps.  But now since it got pretty low a few times I don't trust it enough so I might return it anyways.IPv6 connectivity says no network access.  This might be because when it asked for administrator password to recognize it as a trusted home network I closed it instead of putting in the password.

View 5 Replies View Related

Linksys Wireless Router :: EA2700 Ping To Access Point Through Wire Varies From 1 To 8 Ms

Oct 23, 2012

I purchased Linksys (Cisco) EA2700. For the moment it is being used as an access point for a wireless network (WLAN) and an Ethernet switch.  4 laptops are being connected to it through the wireless network, the wire connects one computer and a separate ADSL modem (it is used for accessing Internet). As a result minimal ping to any of the devices in wireless network is 8 ms – the best result and sometimes rises to 20 ms. Consequently when working with local network resources one suffers from speed decrease. Ping to the access point through the wire varies from 1 to 8 ms. These delays are quite strange as even on cheaper routers ping does not rise above 2 ms (usually <1ms). Is it normal for the device?

View 9 Replies View Related

Linksys Wireless Router :: EA2700 Unable To Access DHCP Reservations Link Under Connectivity / Local Network

Sep 7, 2012

I have an EA2700 running latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I am unable to access the DHCP Reservations link under Connectivity/ Local Network. When I click on it, nothing happens. I've tried multiple browsers including IE 10 (Windows 8 RTM), Firefox 15, and Chrome 21. I also tried on a Windows 7 machine with IE 9 and the link doesn't work on that either except that it shows a box that says Invalid Character when I click on the DHCP Reservations link. I see no invalid characters on the screen. Any workaround other than downgrading the firmware or assigning static IPs on individual PCs?Also, on an unrelated note, where is the Dynanic DNS configuration on the Cisco Connect Cloud?

View 8 Replies View Related

Linksys Wireless Router :: EA 4500 Way To Switch Back To Access?

Dec 2, 2012

I signed up for Linksys Cloud access.. now going to my browser 'the old way' is disabled.. is there any way to switch back to accessing my EA 4500 using the old way by putting in 192.168.1.1 into the browser?

View 2 Replies View Related

How To Time Access Restrictions With WRT120N Router - Wireless Network

Jun 26, 2011

How to time access restrictions with WRT120N router a wireless network?

View 7 Replies View Related

Linksys Cable / DSL :: Access Restrictions On Wag200g?

Feb 7, 2011

I set the access restrictions as instructed but they refuse to work. Firmware version is :-1.01.05,have rebooted, with no success.

View 6 Replies View Related

Linksys Wireless Router :: WRT54GS2 V1 To Take Off The Restrictions

Mar 26, 2012

I'm trying to take off the strict nat restriction.

View 1 Replies View Related

Linksys Cable / DSL :: WAG320N Access Restrictions Don't Work?

Nov 8, 2011

I recently purchased a WAG320N router and have issues with access restrictions. Internet is shut down regardless of the time set with the policy or policies. I am using firmware version V1.00.12. Tried rebooting router, restoring factory defaults & restarting IMAC to no avail. Timezone checked and OK.

View 5 Replies View Related

Linksys Cable / DSL :: WAG320N Random Crashes When Using Access Restrictions

Jul 28, 2011

I have set up several Website Blocking by URL Address & Website Blocking by Keyword that work as expected but the router seems unstable when they are in use and often reboots at random occasions.For example, last 2 crashes happened like this:
opened a website that wouldn't load because it contained one of the keywordsopened a new tab to go to http://192.168.1.1as soon as I hit ENTER router rebootedanother occasion:

Went to Access Restrictions and Disabled an Internet Access Policy (did not close the tab).Opened a new tab and went about my businesslater went back (to the already open router tab) to Enable the Internet Access Policyclicked Save Settingsentered router password againclicked OK and it crashed (rebooted)

WAG320N Firmware Version:V1.00.12 
Firefox 5
 

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved