Linksys Wireless Router :: WR54G Disconnects XBox After Access Restrictions

Apr 18, 2013

Recently switched from WEP to WPA2 on the router and let it run a few days.  Everything was copacetic.
 
Then decided to implement the following access restrictions:

1 - Target MAC based, internet blocked from 9-11:55 PM (why won't it let you block from 9PM-7AM  ;-(  ), blocks son #1's laptop, Kindle

2 - Target MAC based, internet blocked from 10-11:55 PM, blocks son #2's Kindle

3 - Targets IP Address range based (192.168.1.0 - 192.168.1.254), across all devices blocks several porn sites all the time
 
I can get on a play games online but when we start watching video with all 3 restrictions enabled, it will eventually disconnect (can take 1-5 minutes before it happens).  Rebooting XBox usually reset connection, but it would happen again eventually.  After disabling all restrictions, disconnects completely stopped.
 
Is it not possible to have Access Restrictions in place on a WR54G and still stream video?

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: E2000 Constantly Disconnects From XBOX Live?

Jan 5, 2012

I'm  not having an NAT issue, but my e2000 is constantly disconnecting from XBOX Live. About every 3-5 minutes I get disconnected. My wireless is working perfectly, this is only an issue with XBOX Live.  

[code]....
 
and I have double checked every setting. I've set the MTU, unchecked UPnP, entered port forwarding range to XBOX's static IP address, and set the DMZ to my XBOX's MAC address. So, what is causing my router to constantly disconnect? 

View 6 Replies View Related

Linksys Wireless Router :: E1200 - Access Restrictions Change To Access Policy?

Feb 25, 2013

What happen to my router linksys e1200, after i update the firmware to the latest version "Access Restrictions" is change to "Access Policy". how can i revert it back to "Access Restrictions" do i need to downgrade the firmware? 

View 2 Replies View Related

Linksys Wireless Router :: Access Restrictions On WRT600N?

Oct 30, 2011

I'm having problems with the access restrictions feature on the WRT600N.  I do have the latest firmware upgrade, which was released in 2008 I believe.  Anyways whenever I totally block a PC from the internet either by MAC or by IP, it affects the internet on the rest of the house.  Logins to sites do not work right.  Logouts from do not work right.  Different features of different sites will not work properly.  There also will be a lag sometimes when entering the url for a new site.  But as soon as I turn the access restriction off, everything goes immediately back to how it should be working. 

View 3 Replies View Related

Linksys Wireless Router :: E3000 Access Restrictions?

Feb 22, 2012

I have access restrictions set up for certain wireless devices in my home that the kids use to kick them off at 11 pm and keep them off all night. where I am running into a problem is I want to block these same devices from downloading anything without my permission  my son downloads everything he sees, Comcat has already threatened to kick us off their service if we go over 250 gb bandwidth use  in a  month again. so I want to configure something in the router that will block all downloads for specific wireless devices. with the access restrictions I have set up I used the mac address not just the ip so they have no way around it I constantly monitor what is connected. I am using the stock firmware as well

View 1 Replies View Related

Linksys Wireless Router :: WRT120N Access Restrictions Tab Is Missing

Jul 24, 2012

I decided to limit some Internet time for the kids going off this router (which has been working great since set up) but my Access Restrictions tab is missing.  I have an identical router at my work place, same version/firmware, same settings, but the one at work does have the tab.

View 6 Replies View Related

Linksys Wireless Router :: Can't Get Access Restrictions To Work WRT54G V3

Nov 24, 2011

I am trying to get a cell phone to have access to my LAN from 3am to 7am.  I gave the policy a name, allowed access, checked everyday and the time 3a to 7a.  Under edit list of PCs, I entered the MAC address of the phone, and I have also entered the MAC address of the phone on the wireless>edit mac filter list, though didn't know if I should.

View 2 Replies View Related

Linksys Wireless Router :: Wrt54g Access Restrictions For Time?

Sep 2, 2011

I keep trying to set access restrictions for my wrt54g router for time. There is no 12 for time so I'm selecting 11:55 pm to 6am but I keep getting an error message of, "end time must be bigger then begin time." I get this no matter if I select 9pm, 10pm, etc.

View 3 Replies View Related

Linksys Wireless Router :: WRT150N Access Restrictions Not Working

Apr 3, 2011

I am using a WRT150N with firmware v1.00.5. I have a Linux setup with Squid connected to the network with the gateway 192.168.23.254. The WRT150N has a gateway of 192.168.23.1. The WRT150N is also connected to an Apple Base Station which serves as the Access Point for WiFi users.Squid limits access for IP addresses listed under the .254 gateway. But once I change my gateway to 23.1, everything is accessible. I want to block sites as well on the WRT150N. But every time I try to put a new Access Restriction, it doesn't work.

View 4 Replies View Related

Linksys Wireless Router :: Access Restrictions On Current E2500?

May 28, 2012

I have an old WRT54G and the access restrictions really don't work.  it's sloppy and ineffective.
 
i'm thinking about upgrading... perhaps to the E2500.  Do the access restrictions now work properly?  Am I able to allow access to a specific site only during certain times?
 
For instance, am I able to provide access to [URL] only during 6:00pm-9:00pm and block it otherwise?

View 6 Replies View Related

Linksys Wireless Router :: Set Colliding Access Restrictions In Wrt610n?

Sep 14, 2011

I want to set up access restrictions to one MAC address (my kid's machine) basing on week days. From Su to Th allow less access time while during Fr-Sa afternoons access time should be longer. The question is how to program it in router. I know I can set rules with "allow" and "disable" keyword, but I don't know rules preference. When I set (Su-Th 6-21) allowed access time then router automatically denies defined machine internet access outside this time range. The problem is in the power of thus calculated denying time. I want to allow more access time in weekend, so I hoped if I can simply add "Fr-Sa 6-22:30 allowed access time" rule. I hoped that router will regard explicitly set time over inexplicitly set  time but it appears it is not so. What are their preferences/priorieties, iis it possible to stack more rules affecting one MAC address or it is so simple that the first rule "rulez"? Is it possible to set more than one time rule affecting the one machine?

View 4 Replies View Related

Linksys Wireless Router :: E1200 V2 / Getting Error Access Restrictions

May 15, 2012

I had a E1200, I read the articles from the support about the routers, I think the "access Restrictions" has more flexible to setup on for the parental control, after chated to cisco support person online, I was told that the E1200 v2 has this "access restrictions" function, and I wan convinced to purchase from them. I did. I got the E1200 v2 recently, however, after I installed the CD and found there is no "access restrictions" tab, instead the "access policy" is still there. by the way the firmware is 2.0.02 now. How to get the "access restrictions" from setup? I've chatted with cisco support person twice again, but nobody can fix the problem, one suggested to restart and reinstall the CD. I uninstalled the software, restarted the computer and reinstalled the CD. same problem, no tab of "access restrictions".

View 6 Replies View Related

Linksys Wireless Router :: Access Restrictions Option Does Not Exist On WRT160Nv3

Jun 14, 2012

Access Restrictions option does not exist on my WRT160Nv3 Broadband Router Setup Page and I need to use that option.

View 2 Replies View Related

Linksys Wireless Router :: WRT160Nv3 - Set Up Access Restrictions To Allow Only Specific Websites?

Sep 12, 2012

Possible to set up access restrictions to Allow only specific websites?

View 1 Replies View Related

Linksys Wireless Router :: E1000 - Restrictions To Access Download Sites?

Aug 25, 2011

How do I restrict wireless user from accessing download sites that slow my network?

View 1 Replies View Related

Linksys Wireless Router :: EA2700 / 3500 / 4500 Access Restrictions

Jun 29, 2012

I can't find info about Access Restrictions in new series of routers.[URL]Do new routers have both Parental Controls + Internet Access Policy? I need this [URL]

View 2 Replies View Related

Linksys Wireless Router :: E4200 Access Restrictions / There Is No Policy To Choose

Apr 23, 2012

I setup E4200 good.  But, in Access Restrictions, there is no policy to choose from.  Just Parental controls only.restore the Internet Access Policy like the good old routers?

View 1 Replies View Related

Linksys Wireless Router :: WRT610N V2 Access Restrictions Menu Is Missing In Admin Gui

Nov 18, 2011

I 'd like to use the access restrictions capabilities of the WRT610N v2. Unfortunely the "Access Restrictions" menu is missing in the admin GUI; I 've got all the others : "Set -up", "Wireless", "Security", Storage, Applications and Gaming, Administration and Status. I've checked the Firmware already and i'm using the very last one available on the cisco web site. I also noticed that I do not have the "Linksys by Cisco" text on the upper left corner as one can read on user guide but just "Cisco".

View 5 Replies View Related

Linksys Wireless Router :: EA6500 / Enable Parental Controls Or Access Restrictions To Block MAC / IP Address?

Mar 13, 2013

I have been looking into this router, I would like to know if I can enable Parental controls or access restrictions to block a MAC or IP address; from 03:00 AM - 06:00 AM ?Instead of Midnight to 6:00 am.My E4200 works just fine, Just would like to know if the EA6500 Can do that ?

View 7 Replies View Related

How To Time Access Restrictions With WRT120N Router - Wireless Network

Jun 26, 2011

How to time access restrictions with WRT120N router a wireless network?

View 7 Replies View Related

Linksys Cable / DSL :: Access Restrictions On Wag200g?

Feb 7, 2011

I set the access restrictions as instructed but they refuse to work. Firmware version is :-1.01.05,have rebooted, with no success.

View 6 Replies View Related

Linksys Wireless Router :: WRT54GS2 V1 To Take Off The Restrictions

Mar 26, 2012

I'm trying to take off the strict nat restriction.

View 1 Replies View Related

Linksys Cable / DSL :: WAG320N Access Restrictions Don't Work?

Nov 8, 2011

I recently purchased a WAG320N router and have issues with access restrictions. Internet is shut down regardless of the time set with the policy or policies. I am using firmware version V1.00.12. Tried rebooting router, restoring factory defaults & restarting IMAC to no avail. Timezone checked and OK.

View 5 Replies View Related

Linksys Cable / DSL :: WAG320N Random Crashes When Using Access Restrictions

Jul 28, 2011

I have set up several Website Blocking by URL Address & Website Blocking by Keyword that work as expected but the router seems unstable when they are in use and often reboots at random occasions.For example, last 2 crashes happened like this:
opened a website that wouldn't load because it contained one of the keywordsopened a new tab to go to http://192.168.1.1as soon as I hit ENTER router rebootedanother occasion:

Went to Access Restrictions and Disabled an Internet Access Policy (did not close the tab).Opened a new tab and went about my businesslater went back (to the already open router tab) to Enable the Internet Access Policyclicked Save Settingsentered router password againclicked OK and it crashed (rebooted)

WAG320N Firmware Version:V1.00.12 
Firefox 5
 

View 1 Replies View Related

Linksys Cable / DSL :: Setup Access Restrictions To Specify Full URL On WAG200G

Nov 30, 2011

I'm trying to set up access restrictions to specify the full url on my WAG200G (firmware 1.00.07). In particular to block a few specific https:// sites without blocking all https://. It it easy with http://  If I try https://blah.com it throws back an error invalid url.

View 3 Replies View Related

Linksys Access Point :: WET610N Shows Hard Wired Not Wireless With Xbox 36

Dec 27, 2012

I have an E4200 router with 3 WET610N access points.  I did the firmware update on the router, E4200, about 2 weeks ago so my son could use his xbox when he got home after 4 months of being away.  Everything seemed to work OK as far as I could tell....but when he went to sign into xbox live and watch Netflix, it will load to 98% and stop.  A friend of his came over with the new Slim xbox 360 with built in wireless and it will connect fine on its own, if we hook up one of the 610N's to it, it will load to 98% on Netflix and stop again with error code R8152.  Both of my older xbox's will hook up and play on xbox live, just not work with Netflix.I also noticed, it shows the WET610N as a hard wire on xbox and will not search for any wireless networks, I have 2.  The newer Slim xbox360 will search out both networks on its own if you allow it to use its internal wireless.  This only happened since the firmware update.

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8960N - Setting Access Restrictions For Users

Jan 11, 2013

Region : Argentina
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :

Region : Australia
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 110620 Rel.52053n
ISP : Amnet

I want to setup this modem wirelessly such that:

- Wireless User A has full unrestricted wireless access (to Internet and all other services) and
- Wireless User B has no internet access but access to file sharing and related services.

Can this be done and how can it be done?

View 2 Replies View Related

Linksys Wireless Router :: XBOX 360 NAT Is Set To Open

Nov 7, 2007

I have a WRT54G ver.5.(just did latest firmware) and a Buffalo Air Station wireless gaming adaptor.I have gone and port fowarded the UDP 88,UDP 3074,TDP 3074 I believe I have left the UPnP on (brother in law says not an issue)(?) On my XBOX 360 i have the IP & DNS set to Auto, and I get an OPEN setting on my NAT.But when I play online (Halo 3) I can't join any of my friends' parties,acting like it is STRICT. When I set up my IP & DNS to Manual and put in static IP & DNS, I run the tests and get STRICT. It seems to me that even though my NAT "says" its OPEN, it is really on STRICT.

View 4 Replies View Related

Linksys Wireless Router :: Xbox NAT Type Moderate

Apr 5, 2012

My son plays Xbox and asked me to investigate settings on my router that will allow him better play on his Xbox LIVE. From what I've found out I need to trigger ports in my router settings.I have a Linksys E3000 router. His Xbox is plugged directly in from the router.

View 3 Replies View Related

Linksys Wireless Router :: Can't Get Xbox 360 To Work With Wrt54g

Aug 1, 2012

I cannot get my xbox to be able wrt54g . Device on comp does not read xbox yet xbox piccks up router

View 4 Replies View Related

Linksys Wireless Router :: Two Xbox 360's On A Cisco E3200?

Jan 17, 2012

I have the Cisco E3200 and when I turn on my two Xbox 360's ones NAT Type is open and the other is moderate. How do I get them both open? Im constanaly getting disconected on the moderate one. I have not changed any settings in the router it is a basic auto install.

View 5 Replies View Related

Linksys Wireless Router :: Connect E2000 To Pc / Xbox And Ps3

Aug 22, 2012

I've recently started studying for the CCNA exam and one of the first things you learn is the type of cabling required between devices.Basically, I got curious and checked to find that my pc and e2000 router are connected via a straight-through cable even though it's supposed to be that a router and pc share the same pin layout and should be connected via crossover cable. It's the same story with my xbox and ps3 (also wired directly to the router via straight-throughs).

View 1 Replies View Related

Linksys Wireless Router :: Connecting Xbox 360(s) To WRT400N?

Jul 10, 2011

I was able to connect to the n portion of the router with the xboxs fine until last friday.  now i can see the n network ssid fine but the xbox won't connect to it.
 
my pc connects just fine, i've powered cycle the router, tried renaming the router, opened all the required ports, reflashed the router to the current firmware.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved