Linksys Wireless Router :: WRT160N - Can't Open Https://192.168.1.1

Nov 15, 2012

I need to get to my web admin page, but I cannot get into my router to do so.
 
IE tells mt that there is a certifacte error, and then gives me the option of going in anyway.
 
When I select that option, nothing happens, and the same IE warning page remains.
 
I am plugged directly into an e-net port on the router, and it is a WRT160N.

View 6 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRT160N V2 - Open Up Ports To Get Open Connection On Xbox

May 23, 2012

I have the port numbers but do not know how to proceed from there.   Router is a WRT160N V2.

View 9 Replies View Related

Linksys Wireless Router :: No HTTPS Access To Admin Interface On WRT160n V3?

Feb 16, 2012

I was unable to access the web admin on my WRT160n v3 w/ latest firmware this morning. Reset config to defaults & was able to get in. Enabled HTTPS access & disabled HTTP access & was right back where I started; reset to defaults again & left both boxes checked. Can access via HTTP, but HTTPS requests get refused/reset.
 
The reason I needed access was that when I booted up my laptop this morning, my wireless card wasn't picking up an IP address via WIFI, only worked via ethernet, so I need to see what was going on there — several reboots of the router didn't fix, nor has it fixed the HTTPS access problem described above. 

View 6 Replies View Related

Linksys Wireless Router :: Open Nat On A WRT160n V3?

Jan 4, 2012

I have all the ports open necessary and i have upnp enabled.  my modem is a webmaster DPC2100 series. 

View 2 Replies View Related

Linksys Wireless Router :: Open Ports 443 And 80 On Wrt160n V3?

Jan 20, 2012

How do I open ports 443 and 80 on my wrt160n v3 router?

View 1 Replies View Related

Linksys Wireless Router :: WRT160N Cannot Open As An Admin

May 7, 2012

I need to get to my web admin page, but I cannot get into my router to do so.IE tells mt that there is a certifacte error, and then gives me the option of going in anyway.When I select that option, nothing happens, and the same IE warning page remains.I am plugged directly into an e-net port on the router, and it is a WRT160N.

View 1 Replies View Related

Linksys Wireless Router :: WRT160N - Upgraded Firmware Now Setup Page Won't Open?

Aug 7, 2011

I was having problems with the speed being between 30-58 kpbs when going through the WRT160N router, whether its hooked up wired or wireless, the speed with both was extremely slow and wouldnt fully open pager or would take dsl day slow. I hooked up straight to modem and I got 100+ kpbs so I figured its not my ISP, so I read that upgrading my firmware might make it faster, so I upgraded and hit and held the reset button for 30 secs like it recommended but now the 192.168.1.1 wont open, I get a message saying it cant open this page

View 4 Replies View Related

Unable To Open Https Secure Site Through Cc-proxy

Nov 16, 2011

I am unable to open https secure site through cc-proxy

View 1 Replies View Related

Cisco Firewall :: ASA 5520 To Block Https Traffic But Users Are Able To Open Website

Jul 1, 2011

We have ASA 5520 with CSC-SSM 20 and we want to block https traffic but when we are blocking https traffic http traffic going to block but user are able to open website. 

View 1 Replies View Related

Linksys Wireless Router :: Wrt160nl Management Via HTTPS

Mar 2, 2013

I have an issue with new Win8 & IE10. When I try to access web management interface of my wrt160nl (Firmware Version: 1.00.01 B15) via HTTPS I'm receiving the foolowing message:"Continue to this website (not recommended)." If I click on it another error page appears:"Certification error: Navigation blocked. There is a problem with this website's security certificate"
 
At the same time I'm able to acccess the management interface via HTTPS, but from my laptop with Win7 & IE9. There if I click on the red Certificate Error > View certificate and the certificate information is:Issued by: Linksys Issued to: Linksys Valid from : 1.1.2009 to 1.1.2010
 
 So I'd like to know if I could update the router certificate or what settings should I use in IE10 in order to access the web management interface via HTTPS?

View 9 Replies View Related

Linksys Wireless Router :: E1000 And E4200 Not Accessible Via HTTPS

Feb 2, 2012

2 linksys routers a E1000 (fw v2.1.02) and a E4200 (fw v1.0.03) aren't accessable via HTTPS. Both via LAN https://router-ip and via wan https://isp-router-ip:8080 . Both routers are configured correctly (allready did a rerstore to fact. defaults. while having a chat with linksys live chat support). Everything without a result.
 
Ie9 doesn't accept the linksys/cisco certificate. after the first warning ie9 just sais that it's unable to show the page .
 
I did some testing and found that it doesn't work with a win7 +IE9 (up to date updates) and also not on a win XP +IE8 (up to date updates), win XP +chrome (up to date updates).
 
And it works on a old image (virtual Pc) of WIN XP- IE6 (no up to date updates) and win XP(up to date updates) +firefox (older version) .
 
i tried to export the certificate using the xp-ie6 virtual pc. and import it else where, but that works within the lan. Over the WAN it's a " NO GO" . Is this a " Microsoft"   or a " linksys/cisco"  issue?

View 9 Replies View Related

Linksys Wireless Router :: WRT610 Fails On Blocking Https

Feb 5, 2013

I tried to block youtube and facebook https in my router WRT610 V1 but the router fails blocking these websites.  But, it does work for blocking youtube and facebook http.

View 9 Replies View Related

Linksys Wireless Router :: Unable To Access E3000 Via Https

Feb 29, 2012

I can not access my Linksys E3000 router via https://192.168.1.1.Before this mishap, I was able to gain access to my Linksys E3000 router via http://192.168.1.1 and/or the Cisco Connect software application on Windows 7. Yesterday, I went into my router's administration page and disabled http, and enabled https. I then closed out all browsers, restarted them and entered https://192.168.1.1
 
After that, I learned quickly I made a huge mistake to make these changes. I simply can not access my router admin wired or wirelessly. Accessing the internet works great, but router admin page is a no go.Firefox and IE states, "There is a problem with this website's security certificate." and was unable to proceed.Firefox even gave me the option to accept a security exemption to proceed, but that failed.
 
I have also tried using the Cisco Connect utility, and that also failed. I have taken these steps and not been able to access my router's admin page.I don't want to take the last final resort to reset my router and re-enter my settings again. I know I saved the router's backup file somewhere, but can't find it.Is there another way for me to gain access via https with http disabled? All I want to do now is go back in and change it back to enable http access.

View 9 Replies View Related

Linksys Wireless Router :: 4200 V1 Setting Access To HTTPS

Jan 28, 2012

To improve the security of my 4200 v1 router, I turned on in the router configuration "Access via HTTPS" and after the reboot I could not access my router via the browser even when I click on the browser message to continue. What do I need to configure either in the router or my browser to use HTTPS?

View 9 Replies View Related

Linksys Wireless Router :: WRVS4400N Breaks VPN Session During Https Connection?

Oct 6, 2011

here comes the incident description: WRVS4400N breaks established VPN session if I am trying to connect to any LAN host via HTTPS.

View 1 Replies View Related

Linksys Wireless Router :: E1000 - Unable To Load Certain Https Sites?

Oct 12, 2012

This problem just started. I am unable to load certain https sites (for work). If i directly connect to ethernet, it works, so my isp isnt my problem. When i try to connect to the sites, it says "sending request" then times out. I have played around with the settings non stop and nothing has worked. I have a mac running 10.7.5.

View 3 Replies View Related

Linksys Wireless Router :: E4200 1.0.03 - Web Interface Over Https Is Super Slow

Oct 22, 2011

Just upgraded my E4200 to firmware 1.0.03 (from 1.0.01). I have some new issues, questions, and some outstanding issues.

1) Web interface over https is now painfully slow.
2) Does DDNS work in bridge mode? DynDNS allows the sending of an update without an IP address, so it should be able to work.
3) Does accessing the management interface in bridge mode count as local or remote?
4) I'd really like to be able to get WOL working through the router. I managed to create a static DHCP reservation for 192.168.1.254 to ff:ff:ff:ff:ff:ff, but I don't think the router added that entry to the ARP table, is there any way to do this.

(I think have WOL forwarded to 192.168.1.254). 5) Should the router be providing some local dns hostnames? For example I have the device name set up in the local network setup, but it won't resolve. Similar for connected devices, especially those with with a DHCP reservation. 6) In bridge mode, does it matter which port is used to connect to the other network device? Does it have to be the WAN port?

View 6 Replies View Related

Linksys Wireless Router :: Unique And Secured Https Are Not Opening Via EA4500

Nov 23, 2012

bought EA4500 router and successfully installed. The configuration of the desktop i use is - Windows 7 Home Premium SP 1, IE 9.0 and Chrome -23 Dual core Pentium, 2.5 GHZ, 2GB RAM Issue - Many websites, perticularly secured (HTTPS) are not opening up with new router. (Net banking, yahoo mail etc) I didn't face any issue with my old router which is WRT54GH, it is quite old router and did work excellent and working also. I had two calls with CISCO support team, they did check everything and came to conclusion that the issue is with router and asked to get it replaced. I did that but facing same issue. This time i connected my friends laptop to EA4500 along with my personal desktop. My company laptop has following configuration - Windows 7 Enterprise, IE 8.0 Dual core Pentium, 2.67 GHZ, 2GB RAM I tried yahoo mail, net banking websites on my desktop and friends laptop, these websites didn't open in my desktop but no issues faced on friend's laptop. I also noticed that cisco, apple sites are not opening on my desktop but no issue on friends laptop. I tried same thing with my old router WRT54GH, and all sites opened on both the PCs.

View 9 Replies View Related

Linksys Wireless Router :: Which AP To Use With WRT160N

Jul 29, 2011

I have a router WRT160N and I want to connect an AP using a wireless bridge to enhance my WIFI coverage.Which AP is recommended to use without cable together with the WRT160N?

View 7 Replies View Related

Linksys Wireless Router :: Get Over Wi-Fi With WRT160N

Oct 15, 2012

confirm if the highest speed I can get over WiFi with WRT160N v3 is actually 270 Mbps (and not 300 Mbps as advertised), And there's one more thing - is it normal to have Signal: -51; Noise: -93, SNR: 43, Signal quality 53% if I am only 2 meters far from a router? TX power is set to 28.

View 3 Replies View Related

Linksys Wireless Router :: WRT610n Unable To Login Config Page Via HTTPS

Jul 13, 2012

I'm having wrt610n and there is an issue, i can login to the config page via http, but using the same computer i'm not able to login there via https but the same time i can login via ipad and the other computer, using the https.i even tried to reset the router settings, but the result was the same, so what PC option can cause it?

View 6 Replies View Related

Linksys Wireless Router :: E4200 / Benefit To Enable HTTPS Within GUI Instead Of Using Default HTTP?

Mar 16, 2013

Any benefit to enable https with in the gui instead of using the default http?

View 1 Replies View Related

Linksys Wireless Router :: E3200 - Firmware Parental Control Does Not Work On Https?

Dec 11, 2012

I want to block [URL] from Firmware parental control. But it does NOT work. It works on http site but not the https site.
 
E3200 Firmware 
05/17/2012
Ver.1.0.04 (Build 1)

View 9 Replies View Related

Linksys Wireless Router :: WRT610N - HTTPS Secure Login To Admin Page?

Mar 29, 2013

I am trying to log into my WRT610N version 2.0 Router  admin page 192.168.1.1 using the secure HTTPS://192.168.1.1 protocol I have the router local management setting to allow both http and https access login:192.168.1.1/Management.asp I am using Microsoft IE version 10 and Firefox version 19.02 and latest Chrome browsers and none of them will work using the HTTPS protocol.This used to work in the past using older versions of the browsers though I would see a certicificate error warning.I have 2.00.01 build 15 firmware installed and I already tried reseting the router.  Perhaps the router needs new firmware update to handle this with the latest browsers?

View 6 Replies View Related

Linksys Wireless Router :: EA4500 And HTTPS To Work For Local Or Remote Management

May 6, 2012

How to get HTTPS to work for local or remote management? Selecting HTTPS for either local or remote doesn't enable HTTPS for me. It still use HTTP.

View 2 Replies View Related

Linksys Wireless Router :: E3200 Error 501 After Enabling Access Via HTTPS Option

Mar 8, 2012

When accessing the E3200 router using then ERROR 501.Not Implemented.That method is not implemented. The error occured after enabling the "Local Management Access, Access via: HTTPS" option on the Administration > Management tab.I tried different browsers FireFox (version 10), Internet Explorer (version 8,9), the same error was displayed and no acces granted to the E3200 router. I reseted the router and tried the latest firmware 1.0.03 build 9 Feb 1, 2012, but after enablib the option the issue occured again and it is not possible to connect to the router.

View 9 Replies View Related

Linksys Wireless Router :: WRT160N V3 Cuts In And Out

May 1, 2010

I have a wrt160n v3. This is the 3rd one - both the first 2 were defective. I have spent approximately 8 hours troubleshooting the other 2 only to be told they're defective. So, I got a new one. Now, this one keeps cutting in and out. I want as my iPhone constantly switches from 3G to wifi on and over every minute. It really ticks me off! What can I do to fix this? This is a different issue than the original one (very slow) and 2nd (no signal). It's disappointing for a $90 router to do this. I also see the wireless icon on the router flash.

View 6 Replies View Related

Linksys Wireless Router :: How To Turn On Wrt160n

Jan 12, 2012

turning my wireless back on. Some how in attempting to create a shared file between my pc and my wife's Mac the wireless has been disabled. I have tried resetting the device several times following the instructions on line however I still can not get the wireless to re activate. I tried reverse directions from the posts on how to turn off the wireless but still no luck. I tried restoring the computer to a later date?

View 2 Replies View Related

Linksys Wireless Router :: How To Reset WRT160N

Dec 5, 2012

How will I reset WRT 160N?

View 1 Replies View Related

Linksys Wireless Router :: WRT160N Won't Connect To Tv

Aug 3, 2012

I'm having an issue getting my tv to start connecting again to the wireless router.Have tried pin setup (timed out & didn't connect...attempted at least 10 times in this fashion)Have tried entering the password (router seems to refuse the connection to the tv)About a month ago, I was in the Network Magic Map & it looked like one of the laptops had been cloned, so I removed it from the network.

View 3 Replies View Related

Linksys Wireless Router :: WRT160N V3 Keeps Disconnecting

Sep 7, 2011

I have a WRT160N v3 Linksys Router and it keeps disconnecting and then reconnecting. It only disconnects wirelessly. LAN still works fine.I have tried a lot of different methods to solve this issue, but none seem to work.I am very dissappointed in the quality of the product. It has done this every since it was bought. I personally would have sent it in for repairs, but others in my household would not have agreed to that.
 
[code]...

View 1 Replies View Related

Linksys Wireless Router :: Can't Register The WRT160N V2

Jul 15, 2011

Just tried to register my WRT160N V2 and when I tried firstly there is no option for the version 2 model and secondly it says my serial No is incorrect when I have tried it three times and have checked it thoroughly.

View 1 Replies View Related

Linksys Wireless Router :: Using Skype With WRT160N?

Aug 21, 2008

While using Skype I am experiencing poor sound quality, sometimes callers are unable to hear me at all and visa versa.  There is a lot of cutting out.  My internet connection is fine. 

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved