Routers / Switches :: Yellow Sign On Network Adapter
Jun 5, 2011
network adapter error code 10 in device manager saying the device can not start. window xp/asus mainboard M3A78-CM/AMD Athlon E5200 CPU.Uninstall and reinstall new drivers does not solve the problem.
View 1 Replies
ADVERTISEMENT
Aug 3, 2012
It has been 4 months my Router " Wag 120n ". The Router Gives Me A yellow Sign on the network Icon Sying " No network Access " and the wireless Led is blinking with 1 sec interval So
- I cant open Router's Home Page
- there is No ping to 192.168.1.1 " General Failure or Host unreachable " response
- The Only way to get connected again is to replug the router from electricity , it works normally for 5 min and the Yellow Sign shows up again
the Solutions I Tried to fix that up :-
1) Hard reset the 30/30/15 reset
2) Firmware re-flashing
3) Trying an old firmware 1.0.0.12 instead of 1.0.0.16
but nothing of those worked the Only thing that worked for like 20 min the firmware upgrade but after that the problem came up again the problem happens to all Computers on the network wired or on wireless happens on all kind of operations systems win7, xp, vista, (Android for mobiles).
View 3 Replies
View Related
Jan 30, 2013
We are using some desktops as static ip wired and laptops using automaic ip wireless, issue is that in wireless sinal shows yellow marks on laptops no internet but actually getting internet.
View 1 Replies
View Related
Dec 10, 2012
Cisco E1000 router.connecting directly to the router, internet works. When connecting wirelessly, it works for about 2 minutes, then I get no connection and a yellow ! in the connection setting icon. No wireless internet will work until I power down and restart the router. Then the same problem continues.Today when trying it, it won't even connect for a few minutes. It shows as "connected" on my laptop but it has the yellow ! and will not access the internet. So I am no longer ever able to connect wirelessly. I've done a hard reset already.
View 15 Replies
View Related
Dec 12, 2012
I am using the cisco linksys E1200 WiFi router. when ever I connect my laptop to WiFi, its show Limited connectivity/Yellow Caution sign when connected.
I try to reconfigre it & also in factory default mode it show same.
View 1 Replies
View Related
Aug 25, 2012
I have a dell optiplex gx270 desktop that can't detect netgear router. I am connected through a wire cable and have the driver for intel pro/1000mt network adaptor. It shows on the right bottom corner that I have the internet connection but I don't have IP address. I tried restarting computer and router to no avail. I have other computers at home to download drivers. So I visited dell and intel to diagnose and dowload driver for the Intel Ethernet adapter but still can't get no internet connection.
View 3 Replies
View Related
May 16, 2012
I have windows xp with asus motherboard p5kpl-am se. my issue is that I cannot get on the net. I know there is internet connection, but the computor won't recognise that fact. when I go to repair the internet connection, I get a message ( windows cannot detect any wired or wireless cards on your machine) things I have done is to download drivers for the ethernet card and also the motherboard chipset to see if that would work, but no change. the yellow question mark is still there.
View 4 Replies
View Related
Mar 4, 2012
I cant sign in to playstation network and when i try i get the message, error code 80710d36.
View 1 Replies
View Related
Sep 9, 2012
I have reinstalled windows 7 on my laptop. the problem is that the wi-fi internet is not working anymore. The network icon in the system tray shows a cross sign with a red color. I cant seem to be able to find a solution. Tried all the solutions listed in the forum. When i connect the lan cable directly into the laptop the internet works fine. But as soon as i remove it the cross sign again comes and i cant have internet access. I am having an Atheros Ar9285 Wireless Network Adapter installed in my device manager and everything is fine there with no ? or ! marks. I am using a Belkin router with in built modem.
View 1 Replies
View Related
Jan 29, 2011
I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.
View 3 Replies
View Related
Jan 17, 2011
I have internet connections and i use Firefox now instead of Internet Explorer but whenever i want to sign in the Windows Live Messenger or Yahoo, it won't let me because it says the network is not connected. I used to be able to, even when i have Firefox. I check to see if the network is connected and it always is.
View 7 Replies
View Related
Jan 22, 2011
I can find and connect to the wireless network in our house, but it has the yellow triangle with an exclamation mark. My housemates are on the internet fine on their laptops and my xbox live is working, so it's clearly an issue with my laptop. My laptop's internet evidently works with an ethernet cable too, but I can't just go through an ethernet cable all the time since the router is in a housemate's bedroom.
View 14 Replies
View Related
Sep 14, 2011
What does the little yellow star on the network bars mean? I'm using windows 7.
View 1 Replies
View Related
Apr 2, 2012
I am using a Sony Vaio with the following Configurations Win 7 Professional 64 Bit SP 1 The Wireless adapter is Intel Centrino N 6230 with the drivers updated The LAN adapter is Realtek PCIe GBE Family Controller
This laptop is pretty new and I had been experiencing some problems with Wifi and LAN connectivity to internet.
Initially there was a yellow mark over network icon but it allowed me to access Internet. I was not bothered then..Offlate this has turned ugly. The yellow icon would not allow me to connect to internet through wifi or LAN
Sometimes LAN would connect but now a days connecting to wifi has become a real task with most of the time having to trouble shoot the connection.
Troubleshooting gives me different suggestions which are as follows
a) DHCP not enabled over wireless networks....Trying to repair the same does not work
b) Your computer seems to have been configured properly.
c) Troubleshooting cannot solve the problem
I cannot connect to wifi in office and home. I had mcafee before but removed it completely using mcafee removal tool..
View 13 Replies
View Related
Nov 13, 2012
No light on adaptor, not recogised in device manager. Worked before PSU failed.
View 1 Replies
View Related
Feb 23, 2013
I updated my graphics card driver and when I rebooted, the wireless wasn't working. I went into device manager, and all the network adapters listed there had a yellow exclamation mark beside them. Attempts to disable/enable and uninstall/reinstall haven't worked. I'm at a total loss. I've tried system restore but it failed, and I've tried reinstalling the graphics card driver update, but that hasn't worked either.
View 1 Replies
View Related
Oct 20, 2012
I have a belkin surf n300 usb wireless N micro adapter. No problems installing this adapter on a HP Desktop running windows 7. I have tried to install on a gateway laptop also running windows y 64 bit. In device manager it show that the product is working. It will not connect to any network. The adapter is an F7D2102 az ver. 2011az
View 2 Replies
View Related
May 5, 2011
yellow shield on network sign especially wireless network
View 2 Replies
View Related
Feb 21, 2012
Network port: Yellow light blinking and orange light not showing
View 1 Replies
View Related
Jul 26, 2012
I have one cisco 2851 router and one watchguare firewal currently being used as the main router. I want to connect the cisco as a secondary router on the same network.
View 10 Replies
View Related
Jan 19, 2011
how to connect 2 routers on different lan
View 3 Replies
View Related
Nov 11, 2011
I have 2 PC's connected to router.The router is connected to internet.The question is how to get the PC's in the outside network into router?if I connect 1 PC directly to internet I can find and share files with my friend pc ( my computer> network)but when I connect Router in between I cant find any PC's(I find only my PC's) in network.
View 11 Replies
View Related
Aug 21, 2011
Me and my friend hucked up a net wort from our houses (bout 50 feet away) he is brodcasting wirelessly, and my desktop is not wireless so i used a laptop to conect to his and conected a hard line to my router and conected it to my pc and bridged the conections.my router starting ip was fixed to 192.168.2.1 and his is set to 192.168.1.1 so itll conect and i turned off my dhcp ip (his is on). my wireless on the router is off. It worked and i have acess to the network and the internet but every once in a wile i get DCed with a windows error saying my ip for my pc is the same as another computer on the networkIs there a way to fix this? did I hook them up right cuse I am not that good a networking
View 4 Replies
View Related
May 6, 2011
Got two pc's, two routers and one switch, and two serial cables and I want to create a network.
View 4 Replies
View Related
Sep 18, 2011
I have 192.168.2.1 and 10.10.0.1But i cant connect to 10.10.0.1 network from 192.168.2.1 network. What should I do to connect that both are same network I have a Linksys Router.
View 2 Replies
View Related
Jan 30, 2011
I have a D-Link DIR -655 wireless router connected to my Time Warner Cable modem upstairs. Downstairs I have a PS3, Wii, Logitech Revue and a HP laptop. I get low signal strength downstairs(many walls) and would like to run an Ethernet cable downstairs to my devices. What hardware do I need downstairs to hard wire those devices? Not sure if router or switch and what kind. Do I need to make any changes to my existing D-Link wireless router? I want to keep the wireless available for cell phones and the HP laptop.
View 3 Replies
View Related
Feb 12, 2012
A friend was over with his lap top, since then I'm getting "sam's pc network",instead of my network, I can't seem to disable it, nor can the other devices in the house connect to it, the default is Sam's....
View 1 Replies
View Related
Sep 10, 2012
I am currently playing Football manager 2011 with a friend via a network game. The game will work perfectly if I connect my Laptop to the modem directly and bypass the Wireless. However if I try to play the game while connected to the wireless then my friend is unable to connect to the game. This is becoming an issue as for me to be able to play the game I have to turn the wireless off which is getting on the nerves of other family members
View 1 Replies
View Related
Jan 8, 2012
I have followed directions and forwarded the two ports to the local machine. I looked in the router setup to find my current public ip address from Comcast say its 98.221.99.99. If I am on the same network as the machine that is receiving the port forwards, and I type http:// 98.221.99.99 in a browser, the forwarding works fine.If I am external/not on the same network, typing http:// 98.221.99.99 in a browser times out. I have tried http:// 98.221.99.99:9000 too (9000 is the port I need forwarded) and that doesn work either.But, I do have remote management enabled for the router and if I am external/not on the same network and I enter http:// 98.221.99.99:8080 in a browser, I get the router login screen and can enter my user name and password and login to the router just fine.
View 11 Replies
View Related
Jan 22, 2011
I am wondering what the cable wires or sockets on the back of this router are for? could it be you can connect through the cable tv network the sockets fit perfectly in the back of the router thats a strange coinsidence dont you think?
View 2 Replies
View Related
Jan 1, 2011
I have a Buffalo NAS with IP address 192.168.1.30 linked to my router, which has IP address 192.168.2.1. Both have the same subnet mask: 255.255.255.0.DHCP on the router assigns IP's to my computers on the network (192.168.1.xxx). How do I access my NAS?
View 3 Replies
View Related
Jun 3, 2011
I want to block everyone from seeing each other on the LAN. So when someone goes to network neighborhood they can't see no one else on EXCEPT for the pritner or so. I want to do this using a Cisco 1841 router. How can I do this?
View 2 Replies
View Related
Jan 12, 2011
i have 3 home computers using the same wireless router. 2 of them have no problems detecting and accessing internet. one computer can access at times, but many times cannot detect network. i have tried restarting my modem, the router, my computer etc. at times, it works, at times it doesn't. at times, it is ok, at other times it is not.
View 2 Replies
View Related