Linksys Wireless Router :: E4200 Connection Will Drop / Windows Display Yellow Triangle On Wifi Signal

Feb 6, 2013

I have several E4200 routers deployed in our library district.  In one branch, we have been having sporadic problems with computers not being able to maintain a connection.  Typically the computer will connect and then the connection will drop and Windows will display the yellow error triangle on the wifi signal strength display.I have swapped the router with another brand new E4200 with the latest firmware but am still having this problem.

View 6 Replies


ADVERTISEMENT

Internet Won't Work - Connection Bars Display Yellow Triangle With Exclamation Point

Jul 11, 2012

Just bought a new Cisco e1200 router last week. When i first hooked it up, it was giving me extremely low (significantly lower than my old router) downloading speeds. After switching the networking mode from "mixed' to "Wireless-G only", the speeds went back to normal. I tried "Wireless-N only", but it didn't work after that. Seemingly, my computer does not work with Wirless-N?

It's been running okay now, but 2 things happen occasionally: When playing a game, I experience lag for a period of 5 minutes, or sometimes 20 minutes. It goes away on its own. Never happened with my old router. When surfing the internet, pages will refuse to load. The connection bars shown at the bottom right hand corner of my computer display a yellow triangle with an exclamation point. This goes away on its own after about 4-5 minutes. These problems come randomly every 3-4 or days, maybe a bit longer.

View 4 Replies View Related

Yellow Triangle On Wireless Signal?

Mar 2, 2013

I have the M2N32-SLI Deluxe/Wireless Edition motherboard with onboard wireless. I built this computer myself. I did a fresh install of Windows 7. I installed the wireless drivers from the asus website by putting them onto a flash drive from my laptop and installing them on my desktop.On my wireless signal, I get the yellow triangle with a ! in the middle. Nothing else has been installed. I am at a loss of what to do to get rid of this and just get my wireless to work. We have 3 other laptops and one other desktop that work fine with no issues, but this one desktop seems to have problems.

View 10 Replies View Related

Linksys Wireless Router :: WRT54G2 - Little Yellow Triangle Appears When Connected

Aug 18, 2011

I'm having problem with the router WRT54G2, My laptop - winodws 7- connetcs to the wireless.Then it asks me if I wanna configure the router I saw yes, I give a name to the wireless connection and a password, everything works and come to the end, after that I connect to my wireless connection and a little yellow triangle appears -down right on the signal bar. I resetted the router already and update the firmware.Still won't work. I thought maybe I need to put a static IP but I won't find the DSN Code.

View 1 Replies View Related

Linksys Wireless Router :: E900 Yellow Triangle Icon Indicating No Internet Access

Jul 8, 2012

I just recently bought a linksys E900 wireless-N300 Router. I installed the software on the disc and followed the on screen instructions. When I attempt to use an ethernet cable as I did with my last router, it won't work. I get that yellow triangle icon indicating no internet access. I tried using a wireless hub to connect wirelessly...I connect, but no internet access. My PC knows its there, suggests that I reset the modem, doesn't work.

View 8 Replies View Related

Linksys - Laptop Sees A Yellow Triangle For Wireless AP

May 19, 2011

Ok BEFSR81 (192.168.1.1) is connected to the Modem. I have a cable from one of the BEFSR81's LAN ports going to WRT54G (192.168.2.1) WAN port. My computer is connected to the BEFSR81. I can not access the setup page (http;//192.168.2.1) from my computer, maybe I am not suppossed to be able to do that. The Laptop sees a Linksys wireless connection, but there is a yellow exclamation point over it.

View 7 Replies View Related

Linksys Wireless Router :: Week Wifi Signal On Iphone 4 With E4200?

Nov 1, 2011

all other devices have excelent signal

View 5 Replies View Related

Linksys Wireless Router :: E4200 Low Wifi Signal / Maximum Performance

Apr 19, 2011

I've bought a E4200 router because of it's "maximum performance". With the normal settings i have a wireless range of maximum 10 m in the building.  after 5m I've got a low signal.I tested a cheap Netgear-router, which had the same range as the E4200 a 125 Euro.Is my E4200 broke or is it just a bad buy? The settings are standard (that shouldn't be the problem, I guess!?)

View 9 Replies View Related

Linksys Wireless Router :: Wrt320n Wifi Connection Drop When Internet Connected

Oct 11, 2012

I have experienced some strange behavior of WiFi connection using WRT320N router. ISP provides me the internet in 2 modes (day and night). During day mode max speed is 24 Mb/s and during night 60 MB/s. Modem ADSL (Cisco EPC3010) is connected to Linksys WRT320N and on router is configured WiFi.Now issue. In the day mode everything is perfect. Cable connection gives me 24 MB/s and WiFi connection around 22 MB/s so not so bad.  However when my internet speeds up to 60 Mb/s (cable connection via router gives exactly 60), WiFi connection instead speed up as well, just drop to max 17 Mb/s. I have tied several different settings on the router including changes in WiFi band, channel width, different channels (now channel is setup to 1 which is maybe not totally free but no so occupied) and others but unfortunately without significant improvement (in many cases connection just slowed down more).

And some details:
Wireless configuration (now)
Band: 2.4GHz
Mode: Wireless-N only
Channel Width: Auto (20MHz or 40 MHz)
Channel: 1

Wireless adaptor:  Intel Centrino Advanced-N 6230 (I know that this doesn’t mean anything but Win7 shows that connection is established with speed 144MB/s)Router firmware and WiFi card updated to the newest version.

View 9 Replies View Related

Can't Connect Using Wireless - 6TO4 Adapters Has Yellow Triangle With Exclamation Point

Aug 20, 2012

I can't connect to the internet using our wireless router. The signal is excellent but there's a yellow triangle with an exclamation point. It says that there is limited access. I tried resetting the router, checked all the plugs, restarted my laptop., all to no avail. I tried connecting using my phone, and I can go online so the problem lies with my laptop.

I checked my device manager and under Networks, the 6TO4 adapters has a yellow triangle with exclamation point. With a code 10 error. I tried to run 'check for solutions" but I can't connect to the internet. Using my phone, I saw websites dealing with the same problem. I uninstalled all the 6TO4 adapters along with the isatap adapter because it also has the same problem except that it's reporting error 31. Then I restarted my laptop.I can connect to the internet but only through LAN. I still can't connect through my wifi. I tried to reinstall the 6TO4 and isatap but it still shows the same message.

View 11 Replies View Related

Yellow Triangle And No Internet Access

Jun 29, 2011

I am frequently disconnected from the internet, I would say about every 30 minutes.. In the bottom right of my screen where the internet connection thing is it has a yellow triangle with an exclamation mark on it and says "no internet access"

View 19 Replies View Related

Internet Icon Has Yellow Triangle

Jan 5, 2013

I think my computer is infected with malware right now. It is heating up quickly and I'm seeing ads in text in websites that don't do that (cbc, reddit, wikipedia).I had this issue a couple of months ago but Spybot seemed to fix the issue.Recently I noticed my computer was heating faster (and hotter) than usual so I ran a search and it said no threats were found. Not too longer after I start noticing the ads again so I know there is a problem. I have ran the search twice since then and still nothing. I was advised to use ccleaner,malwarebytes, and Super Anti-Spyware. It removed one other threat but the problem was still there. I then started using combofix, but I did not like the look of it so I stopped that scan. It seemed a little sketchy.

My old laptop (the one I'm on now) and my girlfriend's laptop work fine. I connected it with the Ethernet cord and that didn't change anything.I have Windows 7. It's on a 2010 Samsung (I'm not very tech savvy so I'm not sure about all the other details). I primarily used Firefox, but I just switched to Googlechrome this week (well after the problems began).

View 1 Replies View Related

Yellow Triangle Preventing Internet Access

Nov 10, 2011

Where internet connection strength is shown in main screen there is a yellow triangle with a black exclamation Mark in it covering the signal strength icon. I have tried contacting my Internet provider who could not fix. They have sent a new modem but still same issue on pc. I have several games consoles and also have an iPad and iPhone and Internet is working on these however my neighbour tried to use her laptop in my house and has the same issue.

View 1 Replies View Related

What A Yellow Star On Top Of Wifi Signal Bars Mean

Dec 21, 2012

What a yellow star on top of my wifi signal bars mean. It says i have excellent signal but when i put security key in to connect it tells me it cant. My other pcs connect and run with no problems.

View 2 Replies View Related

Yellow Triangle Appears - PC Says Limited Connectivity To Belkin 758

Dec 13, 2012

My wifi used to run fine. Now there is a yellow little hazard sign next to the wifi bars and the PC says: Limited connectivity to belkin.758". I cannot connect to the internet!

View 3 Replies View Related

Security / Firewalls :: Getting Yellow Triangle With An Exclamation Mark?

Nov 27, 2011

I tried to plug in the internet cable in my laptop i kept getting that yellow triangle with an exclamation mark on it (down in the right). i kept plug in and out the cable until i got connected. i use a cable/dsl router, having 2 computers connected in the same time. only mine gave this error, as the other ran perfectly in the meantime. what seems to be the problem? a virus/trojan?

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Few Seconds For Web Interface To Display

Jul 16, 2011

I have a E4200 setup for 2.4 & 5G running the latest firmware. When I connect to the router wireless 192.168.1.1 and log in, it takes a few seconds for the web interface to display. Same happens when switching to the different config tabs. Is there any reason for this? I would think it would be immediate but it takes anywhere from 3-5 seconds for IE9 to respond.

View 2 Replies View Related

Limited Access And Yellow Triangle With Exclamation Point In Middle

Nov 19, 2012

My laptop, which is a gateway, not sure which type but it's relatively new. just a few years old maybe 5 at the max? idk tbh. Anyways when my mom first gave it to me it had an internet problem. Said limited connectivity and would not connect. Someone told me to restart the computer and the internet magically started working again. It didn't work this time.

View 4 Replies View Related

Linksys Wireless Router :: E4200 Speed Drop Using Ethernet Cable

Oct 4, 2011

I'm pretty new to networking.  Purchased a E4200 for my home line.  When i connect directly through the modem i see speeds of about 600mbps but when i connect through the router via an ethernet cable on an empty port on the back of my e4200 my speeds drop to about 180mbps.  I expected a speed loss going through wireless but why i am experiencing a speed loss by using the ethernet as a passthrough?  I thought the ethernet ports on the e4200 were gigabit and support up to 1000mbps? 

View 1 Replies View Related

Linksys Wireless Router :: E4200 Wifi Connection Slowing Down When Downloading

Aug 2, 2011

I have the following setup at home:

-E4200 connected via Ethernet cable (100Mbs) to local ISP for internet access
-E4200 connected via Ethernet cable (1Gps) to my desktop PC
-E4200 connected via wireless (5Ghz with WPA2 personal) to my laptop
 
In general, everything works fine, I can download files from internet to my PC close to the maximum speed limit (80-90Mbs), the wireless connection goes up to 300Mbs and it can achieve around 10-14MB/s file transfer between PC and laptop.A lot of the time the wireless connection to my laptop is used for HD content streaming from the desktop PC. It works very well until I start downloading files to my PC with speed greater than 50Mbs, when the wireless connection speed drops very fast to about 500KB/s which results in interruptions on the video streaming. At the same time the router’s web interface reacts much slower than usual, as if the router’s CPU is overloaded.
 
I’ve read this follow up review on Small net builder url...and it’s clear that there are some issues when taking E4200 to the limit, but in my case it’s nowhere near that.

View 4 Replies View Related

Linksys Wireless Router :: E4200 - Updating Get Failed / Wifi Connection Is Disabled

Jul 14, 2012

The update "failed," due to an "unexpected error."  Wireless connection is disabled, although, as you have probably noticed, I can still connect to the internet (using an ethernet cable from my router to my laptop OSX 10.6.8).  Error Code 3018 is unknown to Cisco's website. Or should I just start over with the installation disk for my E4200 router?

View 2 Replies View Related

Wireless Network :: The Dreaded Yellow Triangle With Network

Jan 22, 2011

I can find and connect to the wireless network in our house, but it has the yellow triangle with an exclamation mark. My housemates are on the internet fine on their laptops and my xbox live is working, so it's clearly an issue with my laptop. My laptop's internet evidently works with an ethernet cable too, but I can't just go through an ethernet cable all the time since the router is in a housemate's bedroom.

View 14 Replies View Related

Linksys Wireless Router :: E4200 Blocking Windows Remote Desktop Connection?

Mar 7, 2012

I just picked up the E4200 to replace a router, I can remote desktop into a computer that is physically connected to this router, but cannot remote desktop into other computers on the network that are connected via another switch.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Wireless Client Drop On Transferring Data

Dec 14, 2011

I have had an e4200 for about a month now and its been pretty good.  But I have noticed that it completely locks up when I go to copy mass amounts of data through it.    I have a NAS drive plugged into it and my laptop is on the 2.4 spectrum.  I went to transfer 8gigs of data from laptop to NAS drive and the entire wireless portion of the router locks up.  All my wireless clients drop and I have to unplug the router and plug it back in.    Even the 5ghz clients drop as well.  I have not tried hardwire, but the main reason I got this was for its throughput.

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Signal Is Much Weaker?

Dec 30, 2009

Just got the E4200 and it seemed great at first.  Connected at 450mbps at close range (maybe 6ft away) and got 223mbps transfer.It seems that recently my signal is much weaker.  I'm around 6-8ft away from the router and I'm getting between 270-360mbps, which to me is poor given the short range.
 
InSSIDer says the RSSI is -50, while my other wireless N router (dual band) is -35 and is in the exact same location. I'm using the 5ghz radio only, and it is set to N, and I'm using channels 44 and 48.  I checked the hidden advanced wireless page and transmit power is already set to high.
 
My laptop has an Intel 6300 wireless card.I'm using the current firmware 1.0.02. I've noticed that the speed of the router randomly seems to drop off too (just as I type this, the link rate has gone back up to 450mbps... typical).  Is the router throttling when it gets hot or something? So I just want to find out if others are experiencing similar rates at the same kind of distance.  Seriously, how can you advertise something as 450mbps when you can't even get that link rate at a distance as short as 6ft?
 
I can't see any thing I can do to increase the link speed (back down to 270mbps now), short of a firmware update to increase the power and use higher channels.  I hear the higher channels are much better, so who do I have to write to, to plead for new firmware?This is a great product, but it's totally ruined by stupid internal antennas and a weak transmit power. Maybe if we make a noise about the not so maximum performance, they might address it.

View 9 Replies View Related

Linksys Wireless Router :: How Far Should Signal Of E4200 Stretch

Feb 4, 2011

How far should the signal of the E4200 stretch? I am noticing some serious issues with signal strength on the far side of my house.  I was under the impression that the E4200 was able to stretch much further distances than most N routers. Is there a setting i can adjust to increase the range? 

View 9 Replies View Related

Linksys Wireless Router :: Set Up Two E4200 To Improve Signal Strength?

Sep 24, 2012

Currently I'm using one e4200 (v1) as my main router in the house. The wireless coverage downstairs is perfect, but upstairs the signal is weak. To improve this I thought about adding the WAP610N as an access point to my network. But this device gets quite some negative reviews ... Thus I was thinking why not add another e4200 (v2) to my network? The price difference is not that big, especially compared to other simultaneous dual band access points. So my question is, would following scenario work?

- first e4200, connected to my ISP, acting as a router, using both the 2.4 as 5 ghz band (basically my current situation)

- second e4200, connected (via UTP cable) to the first e4200, in bridge mode

- second e4200 also using both 2.4 and 5 ghz band, using the same SSID, security etc but a different channel
 
So when moving a laptop for example from downstairs to upstairs, automatically the router/access point with the strongest signal would be used.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Signal Fades Over Time

May 7, 2011

I have the e4200, well, I have had 2 e4200s and they both have had the same issue.I set up my e4200 manually with wpa2 security and I was getting about -50db rssi at my recieving device. Everything tested/worked fine and I went on with life.Without moving the router or anything else over the course of about 3 days the signal had dropped to -71dbm. I power cycled the router and it went back to -53dbm. I tried multiple channels and the same thing keeps happening.The same thing happened a few more times, I contacted tech support, but they just had me change channels.I took the router back for an exchange and the new one has done the same thing in LESS time!The router has the latest firmware and I keep it on an elevated plastic stand to prevent overheating.

View 6 Replies View Related

Linksys Wireless Router :: E4200 - No Signal For 2.4ghz Band?

Oct 27, 2011

On my new E4200, I cannot connect wirelessly to the 2.4GHZ band.  I can only connect to the 5GHZ band.  I know its not the distance because i've got my laptop only 2 feet away.  I've hit the refresh wireless network button, but the only network visible is my 5GHZ. I've also restarted the router, no luck
 
I went into the router settings and made sure that BOTH SSID'S are broadcasting a signal.and are enabled (ive got the channel and other settings set to auto).  I'm able to connect perfectly well to the 5GH band, and walk around the house, but nothing i've done, allows me to see the 2.4GHZ band?  So far, my wireless reception is poorer than my old wrt310n. 

View 4 Replies View Related

Linksys Wireless Router :: WRT120N Drop Internet Connection

Sep 13, 2011

I’ve bought a router, and a wireless antenna for my laptop, since I have a high-speed internet outlet in the living room, but I use my laptop in the kitchen (I don’t have any other pc). So I’ve configured my Linksys WRT120N router in the living room, unplugged the ethernet cable from my laptop, plugged the wireless antenna in the kitchen, and everything was working fine with the wireless network. After about one month I was not able anymore to enter my network with the security key, there was actually no prompt for the security key, just a message “Cannot connect to the network”. I then had to reconfigure the router, going to the router IP address (I used the default settings, a blank for username, and “admin” as a password, as per instructions), use another network name, security key and password, and was able to start again a wireless network with the wireless antenna as before. This problem represented other 3 times (in the last 3 months), and was working fine, but now I cannot reconfigure the router anymore, since the IP address doesn’t accept BLANK/ADMIN anymore, and if I go ahead and reconfigure the router a message says I have to use the default settings in the IP address…

View 2 Replies View Related

Linksys Wireless Router :: Cisco E4200 - How To Improve Signal Strength

Oct 29, 2012

I have a two story house with a basement.  Right now I have a Cisco Linksys E4200 router on the second floor in one of the bedrooms.  I have a DLink GamerLouge 4500 in the basement.  Both systems have the same SSID and are running on different channels.  Computers connect to the appropriate one automatically.  At least assuming that's what's happening.I am getting limited connectivity on the first floor in the kitchen and family room.  Dining room, right by the second floor stairs is fine.  All the bathrooms are dead zones.  Note I have thick travertine tiles on the walls in the bathrooms so may inhibit signals.  Trying to figure out the optimal solution for getting the house setup so everywhere has at least decent signals. I have alot of iPad and laptop devices floating around the house so wireless is key.  Note I have wired plugs with Cat5e all over the house to a central hub in the basement which is where the DLink router sits.  Thoughts on how to improve my signal strength?  Especially in the farther reaching bedrooms and the first floor

View 4 Replies View Related

Linksys Wireless Router :: E4200 - Expected Signal Strength In Same Room?

May 7, 2012

What signal strength should I expect when in the same room as the e4200 ?I'm checking signal strength with iStumbler and with option-right click on airport menu icon on my Mac.I'm getting a signal strength of about -55 while in the room with the router.What signal strength should I expect while in the same room, no physical obstructions, etc. ?

View 6 Replies View Related

Linksys Wireless Router :: E4200 - Any Tweaks To Expand Signal Strength?

Aug 20, 2011

I went out and bought a e4200 today and the signal strength is worse than my WGT300n, is there any tweaks I can do to expand my signal strength?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved