Cisco AAA/Identity/Nac :: ACS 4.2 Can't Install On Windows Server 2003 R2
Nov 29, 2011I have a problem when I try to install ACS 4.2 on Server 2003 R2. When I start the ACS setup, i recive an error message saying:
View 6 Replies
ADVERTISEMENT
Cisco AAA/Identity/Nac :: How To Install ACS 4.2 On Server 2003
Oct 17, 2011I'm curently studying for my CCNP Switch certfification, and I'm learning about RADIUS and AAA. I need to practice this topics, but unfortunately I can't find any way to do it. I have cisco ACS 4.2 but I'm unable to install it on my Server 2003 (it says mmc.exe needs to be closed, tried some things but no luck...). I'm unaware of any simulator for RADIUS or anything similar.
how to install ACS 4.2 on Server 2003 (how to solve the error I'm recieving), or point me towards some other product to practise RADIUS and AAA authentication
Servers :: How To Install Vpn On Windows Server 2003
Feb 19, 2011how to install vpn on windows server 2003
View 1 Replies View RelatedIntel DZ77BH-55K - Install Network Driver For Intel For Windows Server 2003?
Sep 17, 2012I know now that this is a Desktop motherboard, officially not supported for Windows Server operating systems, but I would still like to get it to work. I've confirmed that the motherboard network works in WinXP (Intel 82579V Gigabit) and typically the 32-bit Windows XP drivers work on Server 2003 as well. Several of the other drivers have installed just fine, but the network driver install package fails with "No Intel Adapters are present."
I am trying to install Windows Home Server v1 (based on Windows Server 2003) on this box and just want to get a basic network driver up and running. I've checked the BIOS config, and Device Manager shows a yellow question mark by "Ethernet Controller". The ID is:
PCIVEN_8086&DEV_1503&SUBSYS_20408086&REV_043&11583659&0&C8 but I don't really know what to do with that...
How To Install Windows 2003 From CD
Feb 20, 2012How to update windows 2003 from a CD.
View 2 Replies View RelatedCisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2
Jul 5, 2012I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedWindows 2003 Server - Dhcp Server Cannot Ping Client
Sep 29, 2011i am facing the same problem now but am using windows 2003 server
View 1 Replies View RelatedAAA/Identity/Nac :: ACS 4.2 On Windows 2003 - System Rename?
Jun 6, 2011I am runing ACS 4.2 on Windows 2003 and for some reasons I need to rename the server name?
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ACS 4.2 Configuration With Windows 2003 Active Directory?
Apr 22, 2011i have installed system (Windows Server 2003) and i have configure Active directory for testing and configure one user under it ( TEST01)now on the same machine i have installed Cisco ACS 4.2.i'm trying to Authenticate (TEST01) using ACS but it's not working, i can't even see the logs under EVENTVIWER. simple and easy to configure since both AD and ACS is on the same machine.
View 4 Replies View RelatedWant To Connect Server With Windows Server 2003
Aug 28, 2012After getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
View 2 Replies View RelatedJoin Windows 7 With AD 2003 Server?
Nov 23, 2011I have an Active Directory with Windows 2003 Server and all clients with windows xp and I set default group policy for all clients now I install windows 7 ultimate on one computer and want to join it to domain I have tried to join it and it was. But the policies which I set for windows xp machines on Domain are takes place by windows 7 eg. The basic theme of windows 7 was replaced with classic theme of XP. how can I set separate policies on domain for windows 7 client?
View 5 Replies View RelatedXP Can't Access Windows 2003 Server?
Sep 1, 2011on a network l can't access windows 2003 server, but l can access xp from windows 2003 server
View 1 Replies View RelatedWindows 2003 Cannot Ping Server?
Jul 11, 2011I have a windows 2003 server. It had been working and then a couple of days ago the computers on the network could no longer find the server. I cannot ping the server anymore. I have replaced and tested all cords and routers between the computers and the server
View 5 Replies View RelatedCisco :: LMS 3.2 With Microsoft Windows 2003 Server
Dec 26, 2010In my organization we are having 12, LMS 3.2 servers deployed across the globe. As per Audit policy we need to deploy Microsoft win2003 server security patches on all servers using WSUS. Every month our server team sends us query before applying the patches regarding it's compatibility with LMS.
View 4 Replies View RelatedCisco VPN :: Windows Server 2003 VPN With ISR881
Feb 2, 2011A windows server (W2000) acting as remote access server (The LAN we are trying to reach is behind this equipment). In other site we have a 881 ISR.I need to configure a VPN between the Server and the CISCO. The goal is to access from the PC behind the CISCO to the corporative LAN where the access server sits on without install the CISCO client in every client PC.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: CSlog Service Not Starting On ACS 4.2 Running On Windows 2003?
Jul 5, 2010I just upgraded my ACS v4.0 to the latest available version v4.2(1) build 15 patch 2 and I've got some trouble with the CSLog service. I performed a successive upgrade first to v4.2 then to v4.2.1 and finally applied the two patches. Everything is working fine, I'm using both radius and tacacs services and they doing great like they were in v4.0. The only problem I have is with Cslog service which doesn't start. To be accurate, it starts but stops just after. I've uploaded some logs from cslog.log in cslog/logs directory.
View 6 Replies View RelatedReplace Adc Server In Windows 2003 Domain?
Jun 22, 2012Need to rebuild the server in different hardware.Replace adc server in windows 2003 domain
View 1 Replies View RelatedFile Sharing Windows 2003 Server?
Aug 29, 2011can you show me some screen shots on how to share file in the windows 2003 server operating system?
View 1 Replies View RelatedCisco :: Connect The Router To Windows Server 2003?
Apr 9, 2012I'm having trouble to connect the router to windows server 2003 ( I set up this latter as a router) I have also set up the loopback
View 4 Replies View RelatedCisco WAN :: To MS-PPTP Out To In Windows 2003 R2 Server 1941
May 16, 2011We have a 1941 router configured with LAN/WAN access. Additionally, we need to allow outside Microsoft RRAS connections to an inside Windows 2003 R2 Server. What commands are required to enable this?
WAN IP: 211.XXX.XXX.XXX
Server IP: 10.XXX.XXX.XXX
We've configured the 1941 router to allow outside RDC/RDP to the server at 10.XXX.XXX.XXX
Servers :: Step To Configure LAN In Windows Server 2003
Apr 25, 2011In my collage i have a LAN to the wind server 2003 again i m also configure a small LAN may be take a 5 computer but the communication is not done.
View 1 Replies View RelatedServers :: Change A Windows 2003 Server Name Through Client?
Mar 8, 2011how to change a windows 2003 server name through client
View 1 Replies View RelatedPending - Windows 7 And XP Profiles On Server 2003 Environment?
May 16, 2011i have recently added to a domain. The initial setup is a server running windows 2003 and several xp machines which logon to the domain using mandatory profiles. However, after adding windows 7 machines and logging them on to the system it doesnt load the profiles. (which is fine as I understand you cannot use the same profiles with windows 7+xp)The problem is it automatically creates a roaming profile when logging off and saves it back to the same path as the other profiles under user.V2 which is growing considerably and causing huge logoff and logon times.How can I get the windows 7 machines to not attempt roaming profiles back to the server and instead to just save the profiles locally when logging off.
View 14 Replies View RelatedWindows 2003 Users Cannot Access Server By Unc Path
Aug 3, 2011I've got a windows server 2003 running a big application (sage1000) but suddenly it seems that users cannot access the server by unc path.i've also test to access \server on the server itself doesen't work.
View 2 Replies View RelatedCopying Files From Windows 7 To XP / Server 2003 Hangs
Apr 22, 2011When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared. If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine. I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
View 1 Replies View RelatedBlock Internet Access On Windows Server 2003?
Aug 27, 2012I have a windows server 2003 ent., with about 6pcs and a couple of macs. I don't want the server to connect to the internet, though every computer only has one network card. I want all the clients to access the internet but not the server. How do I set this up.
View 4 Replies View RelatedWindows Server 2003 - 2 NIC's Not Showing Up Under Network Connections?
Sep 5, 2012So I just installed Windows Server 2003 64 bit on an older HP Proliant DL360 G5 and am trying to connect it to my network but neither of the 2 NIC's are showing up under Network Connections... the only option I am given is the ''Add Network Places Wizard''.
I have an ethernet cable plugged into NIC 1 and the LED's work so I know it's not a bad NIC card- do I have to download drivers for the NIC? Do I download them to a USB/CD and then just boot from that?
Windows 2003 Server Network Login Passwords?
Oct 10, 2012I want remove saved passwords in 2003 server with which XP clients login
View 1 Replies View RelatedUsing LAN Connection Can't Ping Client On Windows Server 2003
Nov 20, 2011Why i can't ping client to server using LAN connection. but i can ping server to client. i use windows server 2003 as a server.
View 1 Replies View RelatedNetworking :: Best Way To Connect Windows Server 2003 And Ubuntu 10
Mar 14, 2011If I have two servers, one running Windows Server 2003, and one running Ubuntu 10, what would be the best way to 'map' one's drive to another? Either way is fine. They are each in a different state, and each have an external IP. I just need to do some processing on the Ubuntu server, then write the file either to its own drive, and have the web server (Windows) read it, or, have it write to the Windows HDD, and have Windows read it.
View 2 Replies View RelatedCisco :: Router 2901 As NTP Server For Windows 2003 Network
Sep 19, 2012I am trying to configure a 2901 router to act as NTP server on my network.This set "ntp master" in the router.I have no possibility to access an NTP server on the Internet.Now I want to configure a Windows 2003 DC to update the time from the NTP Server (router 2901).In Windows 2003, the registry value "Ntp Server" may have to be IP addresses or FQDN? (In my case I put router_ip_address, 0x1) 0x1 = use this "SpecialPollInterval" to update the time? Where you can find that these actions mean "next action is 3"? In Event Log in Windows 2003 DC receipt Event ID 35:The time service is now synchronizing the system time with the time source ROUTER2901_IP (ntp.m | 0x1 | W2K3_SERVER_IP: 123 -> ROUTER2901_IP: 123).Configure "Special Poll Interval" in 10 seconds.But the time on the Windows Server 2003 DC continuous five minutes ahead of time compared to the 2901 router.
View 2 Replies View RelatedBroadband :: Network Connections Lost Windows 2003 Server
Feb 8, 2011Network connections lost Windows 2003 Server, Reload Drivers Still not working.
View 28 Replies View RelatedServers :: Windows 2003 Server Service Stop Automatically
Mar 15, 2011i have a server with windows server 2003 that SQL server 2008 is installed on it.regulary server service will be stoped automativcaly and all shared folders will be unshared and i must restart server and waiting for next stop and .
View 1 Replies View Related