After getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
If I have two servers, one running Windows Server 2003, and one running Ubuntu 10, what would be the best way to 'map' one's drive to another? Either way is fine. They are each in a different state, and each have an external IP. I just need to do some processing on the Ubuntu server, then write the file either to its own drive, and have the web server (Windows) read it, or, have it write to the Windows HDD, and have Windows read it.
I am trying to configure a 2901 router to act as NTP server on my network.This set "ntp master" in the router.I have no possibility to access an NTP server on the Internet.Now I want to configure a Windows 2003 DC to update the time from the NTP Server (router 2901).In Windows 2003, the registry value "Ntp Server" may have to be IP addresses or FQDN? (In my case I put router_ip_address, 0x1) 0x1 = use this "SpecialPollInterval" to update the time? Where you can find that these actions mean "next action is 3"? In Event Log in Windows 2003 DC receipt Event ID 35:The time service is now synchronizing the system time with the time source ROUTER2901_IP (ntp.m | 0x1 | W2K3_SERVER_IP: 123 -> ROUTER2901_IP: 123).Configure "Special Poll Interval" in 10 seconds.But the time on the Windows Server 2003 DC continuous five minutes ahead of time compared to the 2901 router.
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
I have an Active Directory with Windows 2003 Server and all clients with windows xp and I set default group policy for all clients now I install windows 7 ultimate on one computer and want to join it to domain I have tried to join it and it was. But the policies which I set for windows xp machines on Domain are takes place by windows 7 eg. The basic theme of windows 7 was replaced with classic theme of XP. how can I set separate policies on domain for windows 7 client?
I have a windows 2003 server. It had been working and then a couple of days ago the computers on the network could no longer find the server. I cannot ping the server anymore. I have replaced and tested all cords and routers between the computers and the server
In my organization we are having 12, LMS 3.2 servers deployed across the globe. As per Audit policy we need to deploy Microsoft win2003 server security patches on all servers using WSUS. Every month our server team sends us query before applying the patches regarding it's compatibility with LMS.
A windows server (W2000) acting as remote access server (The LAN we are trying to reach is behind this equipment). In other site we have a 881 ISR.I need to configure a VPN between the Server and the CISCO. The goal is to access from the PC behind the CISCO to the corporative LAN where the access server sits on without install the CISCO client in every client PC.
i have recently added to a domain. The initial setup is a server running windows 2003 and several xp machines which logon to the domain using mandatory profiles. However, after adding windows 7 machines and logging them on to the system it doesnt load the profiles. (which is fine as I understand you cannot use the same profiles with windows 7+xp)The problem is it automatically creates a roaming profile when logging off and saves it back to the same path as the other profiles under user.V2 which is growing considerably and causing huge logoff and logon times.How can I get the windows 7 machines to not attempt roaming profiles back to the server and instead to just save the profiles locally when logging off.
I've got a windows server 2003 running a big application (sage1000) but suddenly it seems that users cannot access the server by unc path.i've also test to access \server on the server itself doesen't work.
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared. If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine. I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
I have a windows server 2003 ent., with about 6pcs and a couple of macs. I don't want the server to connect to the internet, though every computer only has one network card. I want all the clients to access the internet but not the server. How do I set this up.
So I just installed Windows Server 2003 64 bit on an older HP Proliant DL360 G5 and am trying to connect it to my network but neither of the 2 NIC's are showing up under Network Connections... the only option I am given is the ''Add Network Places Wizard''.
I have an ethernet cable plugged into NIC 1 and the LED's work so I know it's not a bad NIC card- do I have to download drivers for the NIC? Do I download them to a USB/CD and then just boot from that?
i have a server with windows server 2003 that SQL server 2008 is installed on it.regulary server service will be stoped automativcaly and all shared folders will be unshared and i must restart server and waiting for next stop and .
When attempting to log in to a computer (running Windows 7 Professional) here at the office using the network administrator account, I get the error message: "The trust relationship between this workstation and the primary domain failed." I wasn't here when this laptop was set up, and so I don't know if any local user accounts were made or what their passwords would be if they were there, so I can't think of any way to log in to the machine and disconnect/reconnect to the domain which is really my only idea on how to fix it. Finding out what would cause this to suddenly start happening would also be nice, but mostly I just need to figure out how to get reconnected so I can get this back up and running.
I am interested in knowing how to check on my 2003 Server what usernames are blocked from downloading. Many of the clients seemed to have downloaded Google Talk and also Spotify. I was wondering if I can check -where it is located and how to enforce this policy. (or create it if it isn't in effect correctly)
I have a Windows 2003 server that had a wireless router for employees to have wireless access.The wireless router has totally malfunctioned and will no longer power up. I've replaced the power supply and still will not power. I purchased a new router to replace the Belkin.My users can access the internet over via the new wireless router, but now cannot access their shared folders.I tried disabling DHCP on the wireless but now they cannot access the internet.
Is it possible to have my file server only accessable in the LAN. I would like to block all inbound/outbound traffic outside of the LAN. I back up all of my personal files to that server and some contain sensitive information.
At my small business (30 employees) we currently don't have a hardware firewall. Should I have one? If so what do you recommend? We are all connected to a Windows Server 2003 domain in one office building.
I have a Dell PowerEdge 2800 (Just reinstalled windows Server 2003) I have tried the two (non lan) network driver setups that dell has on its site and I get "the update package is not compatible with your system configuration".
I am trying to access the internet on my box, how to accomplish this or fix the problem I'm getting while loading driver setup?