I have a Dell PowerEdge 2800 (Just reinstalled windows Server 2003) I have tried the two (non lan) network driver setups that dell has on its site and I get "the update package is not compatible with your system configuration".
I am trying to access the internet on my box, how to accomplish this or fix the problem I'm getting while loading driver setup?
I know now that this is a Desktop motherboard, officially not supported for Windows Server operating systems, but I would still like to get it to work. I've confirmed that the motherboard network works in WinXP (Intel 82579V Gigabit) and typically the 32-bit Windows XP drivers work on Server 2003 as well. Several of the other drivers have installed just fine, but the network driver install package fails with "No Intel Adapters are present."
I am trying to install Windows Home Server v1 (based on Windows Server 2003) on this box and just want to get a basic network driver up and running. I've checked the BIOS config, and Device Manager shows a yellow question mark by "Ethernet Controller". The ID is:
PCIVEN_8086&DEV_1503&SUBSYS_20408086&REV_043&11583659&0&C8 but I don't really know what to do with that...
I cant find a network driver that will work. I have a dell dimension 4600 that i am trying to run windows server 2008 on. its original opersting system was xp/sp3 . i simply want to know if there is any working Ethernet driver for windows server.
View 1 Replies View RelatedI need LAN and WLAN drivers for Windows Server 2003 for Inspiron 15R Queen N5110.
View 1 Replies View RelatedI'm a Dell Partner and I've been trying to figure out why I can't order a Poweredge T410 server with 8GB of RAM. The only options are 3GB, 4GB, 24GB, or 32GB. I ordered a T410 for another client at the middle of last year with 8GB of ram. Now they don't offer that. I realize I could buy RAM after the purchase, but I'd rather just buy the server configured the way I need it for the client and not have to worry about separate warranties on the aftermarket memory, etc.
Also, I want to do a custom RAID configuration, as suggested a few times on the forum. Two harddrives in a RAID-1 array for the OS, and four harddrives in RAID-10 (or RAID-5 with a hot spare) array for data.
I did an online chat with Dell and the rep said it was not possible, i.e. what you see in the online configurator is what you get. Do I need to call Dell to get a custom configuration?
So I just installed Windows Server 2003 64 bit on an older HP Proliant DL360 G5 and am trying to connect it to my network but neither of the 2 NIC's are showing up under Network Connections... the only option I am given is the ''Add Network Places Wizard''.
I have an ethernet cable plugged into NIC 1 and the LED's work so I know it's not a bad NIC card- do I have to download drivers for the NIC? Do I download them to a USB/CD and then just boot from that?
I want remove saved passwords in 2003 server with which XP clients login
View 1 Replies View RelatedNetwork connections lost Windows 2003 Server, Reload Drivers Still not working.
View 28 Replies View RelatedI am trying to configure a 2901 router to act as NTP server on my network.This set "ntp master" in the router.I have no possibility to access an NTP server on the Internet.Now I want to configure a Windows 2003 DC to update the time from the NTP Server (router 2901).In Windows 2003, the registry value "Ntp Server" may have to be IP addresses or FQDN? (In my case I put router_ip_address, 0x1) 0x1 = use this "SpecialPollInterval" to update the time? Where you can find that these actions mean "next action is 3"? In Event Log in Windows 2003 DC receipt Event ID 35:The time service is now synchronizing the system time with the time source ROUTER2901_IP (ntp.m | 0x1 | W2K3_SERVER_IP: 123 -> ROUTER2901_IP: 123).Configure "Special Poll Interval" in 10 seconds.But the time on the Windows Server 2003 DC continuous five minutes ahead of time compared to the 2901 router.
View 2 Replies View RelatedI was upgrading the OS [c:] on a DELL Poweredge 840 server from Win2k3 server to Win2k8 R2 server using the Dell SMTD DVD to prep the install. This has always worked in the past without destroying the data partitions. (I have now found out this only works properly if the OS is on a RAID 1/0/10 and the data on a RAID 5)
In this case the OS & Data were both on RAID 5 & the Dell tool reformatted (quickly) or maybe reset the partition table so that it looks like one big drive. I noticed this once I got to the install screen for Windows 2008 R2 and shut down the system.
Are there any utilities that can be run from a bootable CD/DVD that can undo the format on the RAID 5 set or else let me browse & recover the data on the various partitions?
I've got a Dimension 8300 which I loaded Windows Server 2003. I've looked high and low for a compatible network driver with no luck.
I've attempted to install WinXP drivers as I've read that it worked for others in the past... no luck for me though. I've also tried a number of different chipset drivers without any luck.
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedI'm looking (LAN) driver for Win Server 2003 for the MAXIMUS motherboard of ASUS for the lan card
View 1 Replies View Relatedi am facing the same problem now but am using windows 2003 server
View 1 Replies View Relatedprovide me the link for downloading windows xp driver for dell inspiron 620s?
View 13 Replies View Relatedmy computer has designed for windows XP now I`m installing windows7 but I miss a network controller driver. my computer is dell latitude D600.
View 3 Replies View RelatedAfter getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
View 2 Replies View RelatedI have an Active Directory with Windows 2003 Server and all clients with windows xp and I set default group policy for all clients now I install windows 7 ultimate on one computer and want to join it to domain I have tried to join it and it was. But the policies which I set for windows xp machines on Domain are takes place by windows 7 eg. The basic theme of windows 7 was replaced with classic theme of XP. how can I set separate policies on domain for windows 7 client?
View 5 Replies View Relatedon a network l can't access windows 2003 server, but l can access xp from windows 2003 server
View 1 Replies View RelatedI have a windows 2003 server. It had been working and then a couple of days ago the computers on the network could no longer find the server. I cannot ping the server anymore. I have replaced and tested all cords and routers between the computers and the server
View 5 Replies View Relatedi am unable to download proper driver for Inspiron 15 3521 win7 32-bit wifi driver.
View 5 Replies View RelatedAfter change my OS to Windows 7 Pro Enterprise my Dell E5430 missing the network controller driver. let me know the right driver to download and install.
View 4 Replies View RelatedI have to re-installed windows 7 32- bit on my dell inspiron n5110
View 1 Replies View RelatedI recently reinstalled windows 7 on my dad laptop after he <ADMIN NOTE: Profanity removed as per TOU> it up beyond repair. After installing the appropriate drivers I still had no detection on my w lan adapter so I checked out the device list, and it says I'm missing drivers for two things: one is the network controller, the other is just listed as an unknown device.
I already installed every driver for the appropriate devices on the laptop, in the correct order, or as i could best manage it, but still no dice. The only network driver on the disk for my inspiron is one for an Ethernet controller.
Need to rebuild the server in different hardware.Replace adc server in windows 2003 domain
View 1 Replies View Relatedhow to install vpn on windows server 2003
View 1 Replies View Relatedcan you show me some screen shots on how to share file in the windows 2003 server operating system?
View 1 Replies View RelatedIn my organization we are having 12, LMS 3.2 servers deployed across the globe. As per Audit policy we need to deploy Microsoft win2003 server security patches on all servers using WSUS. Every month our server team sends us query before applying the patches regarding it's compatibility with LMS.
View 4 Replies View RelatedA windows server (W2000) acting as remote access server (The LAN we are trying to reach is behind this equipment). In other site we have a 881 ISR.I need to configure a VPN between the Server and the CISCO. The goal is to access from the PC behind the CISCO to the corporative LAN where the access server sits on without install the CISCO client in every client PC.
View 1 Replies View RelatedI'm having trouble to connect the router to windows server 2003 ( I set up this latter as a router) I have also set up the loopback
View 4 Replies View RelatedIn my collage i have a LAN to the wind server 2003 again i m also configure a small LAN may be take a 5 computer but the communication is not done.
View 1 Replies View Relatedhow to change a windows 2003 server name through client
View 1 Replies View Relatedi have recently added to a domain. The initial setup is a server running windows 2003 and several xp machines which logon to the domain using mandatory profiles. However, after adding windows 7 machines and logging them on to the system it doesnt load the profiles. (which is fine as I understand you cannot use the same profiles with windows 7+xp)The problem is it automatically creates a roaming profile when logging off and saves it back to the same path as the other profiles under user.V2 which is growing considerably and causing huge logoff and logon times.How can I get the windows 7 machines to not attempt roaming profiles back to the server and instead to just save the profiles locally when logging off.
View 14 Replies View Related