Poweredge T410 Server - Custom Dell Configurations
Jan 17, 2011
I'm a Dell Partner and I've been trying to figure out why I can't order a Poweredge T410 server with 8GB of RAM. The only options are 3GB, 4GB, 24GB, or 32GB. I ordered a T410 for another client at the middle of last year with 8GB of ram. Now they don't offer that. I realize I could buy RAM after the purchase, but I'd rather just buy the server configured the way I need it for the client and not have to worry about separate warranties on the aftermarket memory, etc.
Also, I want to do a custom RAID configuration, as suggested a few times on the forum. Two harddrives in a RAID-1 array for the OS, and four harddrives in RAID-10 (or RAID-5 with a hot spare) array for data.
I did an online chat with Dell and the rep said it was not possible, i.e. what you see in the online configurator is what you get. Do I need to call Dell to get a custom configuration?
View 4 Replies
ADVERTISEMENT
Aug 12, 2009
I have a Dell PowerEdge 2800 (Just reinstalled windows Server 2003) I have tried the two (non lan) network driver setups that dell has on its site and I get "the update package is not compatible with your system configuration".
I am trying to access the internet on my box, how to accomplish this or fix the problem I'm getting while loading driver setup?
View 2 Replies
View Related
Jan 18, 2012
I was upgrading the OS [c:] on a DELL Poweredge 840 server from Win2k3 server to Win2k8 R2 server using the Dell SMTD DVD to prep the install. This has always worked in the past without destroying the data partitions. (I have now found out this only works properly if the OS is on a RAID 1/0/10 and the data on a RAID 5)
In this case the OS & Data were both on RAID 5 & the Dell tool reformatted (quickly) or maybe reset the partition table so that it looks like one big drive. I noticed this once I got to the install screen for Windows 2008 R2 and shut down the system.
Are there any utilities that can be run from a bootable CD/DVD that can undo the format on the RAID 5 set or else let me browse & recover the data on the various partitions?
View 9 Replies
View Related
Jun 2, 2011
I working with two PowerEdge R515 systems and for some reason I keep getting strange power errors on the front LCD where it turns orange. It started with one about an on-board regulator failure and this morning when I came in both machines were powered down with a different LCD error, something about the Fault-safe voltage being out of range? They both say to contact support.
I got these error logs this morning. All the power readings show as being ok in the iDRAC page and in ESXi readings.
System BootThe system board PFault fail-safe voltage is outside of the allowable range. System BootThe system board PG voltage is outside of the allowable range. System BootThe system board PG voltage is outside of the allowable range.
The only strange thing i see is that on the power supply tab it says the max input wattage is 750 with the actual input being 972.
Individual Power Supply Elements Status Location Type Input Wattage Max Wattage Online Status FW Version PS 1 AC972750Present03.02.00
View 1 Replies
View Related
Apr 18, 2012
I'm having a really difficult time getting to find the right drivers for a poweredge 1950. I know it has 2 broadcom on-board NIC's and they work fine in Windows 7 so I feel I should be able to find drives for Vista bus 64. I tried downloading the drivers from the dell site and they turned out to be drives for server 2003 and 2k8, and wouldn't work with Vista.
how to identify the chipset of the onboard NIC's so I can do a better search for the drivers? I tried running Belarc advisor which usually gives pretty detailed info but it didn't even mention the broadcom's.
View 5 Replies
View Related
Jul 24, 2011
I have a dell poweredge 830 (3.0 dual core pentium, 2gb ram, 2x160gb hdd in raid 1, dual port intel gigabit card). I'm trying to find a router OS that logs bandwidth by ips on the lan. I tried untangle and clearos neither of which have a feature (or one that I can find) that logs the bandwidth by ip. Apparently pfsense has a package you can install but I have never been able to get pfsense to work on this pc, it always errors in one way or another (on the 2.0rc3 I can't access the web page, it says it is missing a file).
View 19 Replies
View Related
Feb 3, 2011
have a Dell Poweredge 2500, and it only has PCI slots, and i need to get a sata controller to add 1/2 drives to it, i am unsure what would be the best, but i am not looking to spend more than 60 or so for it, i am not worried about it being the greatest out there, as this server is going to be replaced in 6 mths, i am just outgrowing the 4-18.6 gig hot swap scsi drives, and my pockets arent deep enough to buy high capacity scsi drives, i will probably add 1, 1 or 2 Terabyte hard drive and a dvd-rw.
View 4 Replies
View Related
Apr 7, 2012
Ok, so what I want to do is make a router/firewall/proxy (maybe add webserver/FTP as well). Just to start off I want to say that I have moderate knowledge of Linux, enough to administer it from the CL. I have setup routers before but it was years ago and I've forgotten some of the details involved. What I do is a base LAMP install, with DNS, Samba, DHCP server, OpenSSH and then Webmin for easier administration. I've also installed EHCP (easy hosting control panel) in the past but have not at this point.
So, what I want to know is how do I setup the NIC's in the etc/network/interfaces file. Let's say that eth0 connects to the modem and eth1 & 2 are internal adapters. Currently my network is running a Linksys WRT54GL with DD-WRT and the router is set to DHCP for the WAN connection and DHCP is running on the internal network as well. The modem is at 192.168.254.254 and is giving the router an address of 192.168.254.1 my internal network is 192.168.1.1 (192.168.1.0/24). I would like to setup my internal router address to 192.168.1.1 so I guess I need to set it to static in my interfaces config and then set my eth0 to dhcp. Does this sound correct?
So if I do the above my only question is how do I setup the routing tables after that? I always get messed up when I need to make the switch from my Linksys router to my Linux box. I'm not worried about firewall rules at first I can change those once I have the router up and running. I just don't know if I need to make some kind of bridge to bridge the eth0 and eth1 (external NIC and internal NIC).
View 3 Replies
View Related
Dec 22, 2012
I look forward to the new firmware can improve this problem.
View 3 Replies
View Related
Apr 13, 2011
I have just got a new laptop from work (Lenovo T410) but cannot seem to access the internet via wireless at home. The wireless mode at home is 802.11n. On my previous laptop (a Lenovo T60), I had to buy a belkin N Wireless USB adapter and used that. But I don't think I need to use it on the T410, right? When I switch the T410 on, the Access Connections box comes on and I can see all the different wireless networks available and they have good strength, but I just cannot connect, I don't know why? I have entered the 10 digit encryption key.
View 2 Replies
View Related
Mar 2, 2011
how to connect UTP cable
View 1 Replies
View Related
Jan 21, 2012
Using a command prompt, how do I discover the internal IP of an unused router, which I set to a custom value and forgot? The router is not currently in use for internet access. I would like to access the control panel of the router without resetting it.I attached my netbook to the router with an RJ45 cable and disabled the netbook's wireless adapter to avoid conflicts with my current network. Using an elevated command prompt, I did an "ipconfig /release", rebooted and ran "ipconfig /all", but the gateway entry is blank. An "arp -a" returns 169.254.190.120 as the only interface. A "netstat -a" returns 169.254.190.120:xx...'s, 127.0.0.1:xx...'s, and 0.0.0.0:xx...'s, but no router internal IP address.Is there a way discover the attached device without resetting?
View 1 Replies
View Related
Jun 6, 2012
How to flash a DIR-601 Rev B1 with any of the custom firmwares out there? I've tried all of them this morning and haven't had any luck. I set the router to recovery mode and tried openwrt, dd-wrt, tomato, and gargoyle. I tried with chrome, firefox, ultra simple web browser, and ie 8. Every attempt resulted in "Upgrade Failed". I know Rev A1 is supported by DD-WRT, just sucks newegg sent me a B1. Looks like several other routers run similar hardware, so it's got to be doable.
View 5 Replies
View Related
Jul 9, 2012
we are desperately trying to set a custom password of our WCS database in order to use it for direct SQL queries (Cumbersome over Web surface). To my knowledge there is a way to reset it however this password would be randomly generated and not available in plain text.
Until version 6 there was a feature to directly set a password via the dbadmin command.
View 12 Replies
View Related
Aug 12, 2012
My devices configurations are not getting backed up.
View 1 Replies
View Related
Feb 25, 2012
I have a Netgear WNDR3400 router and I would like to just dabble with it and see if I can't get any more performance out of it. I checked dd-wrt already and it isn't supported yet. Any other place to get custom firmware for my router type?
View 3 Replies
View Related
Nov 16, 2012
I am in need of playing a stream (generated by s program like VLC) on more than 3 TV's. The TV's are dumb lcd's with just hdmi connectors (no lan). I thought about getting some media players that I connect to the local network which will then pick up my stream and stream it further to the TV's.
View 3 Replies
View Related
May 31, 2012
I have a ACS 5.1, My mailing server does not run on standard port number of smtp (25). Need to know if i can customize the port number suiting my mailing server requirement.
View 0 Replies
View Related
Oct 22, 2012
whats the difference between custom and standard discovery? There´s a line on the help page: "The Use Policy Configuration Settings radio button will be enabled only after adding a Default Credential Set Policy."The radio button is not enabled although I´ve two default credential sets and two default credential sets policy configuration.
View 1 Replies
View Related
May 30, 2011
I want to configure RBAC for ANM 4,2 using tacacs+ and ACS 5.1 [code]
When the admin user logs in, this policy element is triggerd, but the Role is not sent back.How to configure the Custom Attribute?
View 1 Replies
View Related
Aug 9, 2012
I have some questions regarding the addition of custom services and their use in QoS for RV routers (I use the RV220W). Suppose I create a custom service as:
Name: My Service
Port: TCP 60000
1. Does this port number refer to the port number used by my LAN computer or the port number on the other side e.g. some computer on Internet I am using this service to connect to? Some services use the same port number on the side that initiates the service and the receiving end but there are services that use different ports for the initiating and receiving end. So, what is the meaning of the port number when creating a custom service?
LAN Computer : (port TCP 60000) <----> Internet computer : (some TCP port, not necessarily 60000) - or -
LAN Computer : (some TCP port, not necessarily 60000) <----> Internet computer : (TCP port 60000) ?
2. Suppose I create a QOS profile binding configuration with respect to this custom service for a specific IP address on my LAN. QOS is applied to the outgoing network traffic only. How is this profile going to work?
A. Applied to traffic originating from my LAN device with the specified IP address and port TCP 60000 - or -
B. Applied to traffic originating from my LAN device with the specified IP address to another computer's port TCP 60000 ?
View 9 Replies
View Related
Jun 11, 2012
I would like to create custom reports using the Report Designer (Reports -> Report Designer -> Syslog) and filter certain syslogs from being seen when I run the report like permitted ACL entries, 802.1x successful authentications. It seems like there is only the option of displaying what you want to see, not what you don't want to see.
View 6 Replies
View Related
Jun 1, 2011
I have a Domain Controller on windows 2003 advanced server. and I have roles and some configuration such as rights, user accounts, DHCP configuration, DNS server and etc on it.Some times windows needs to be reinstalled but after reinstalling,configuration of roles would be lost. I don't know how can I backup these settings? Is there any solution about this problem.I know a simple way is creating an image of windows installation drive by an application such as Norton Ghost but I'm talking about windows solution.
View 3 Replies
View Related
Sep 9, 2011
My friend recently let me have his Seimens Gigaset SE567 modem which i needed cause it has a router but as soon as i switched it with my old router which is a Westell 6100f,the internet light wont show up ..so i contacted verizon and they said that there service is plug and play type of service so i am lost on what to do ..i looked around the forums and i got close by going to the browser and typing the IP but from there i am stuck ..i don't know how to set up any thing in the configurations.
View 2 Replies
View Related
Feb 27, 2012
setting two network, I try but the other other network is so slow and a lot of time will not connect to the net
View 1 Replies
View Related
Jan 18, 2013
Platform: LMS 3.2.1 with RME 4.3.2 on Windows 2003.I'm having a problem with several devices that were backing up fine until this week - suddenly they aren't backing up their running configurations, but RME is fetching their startup configurations fine and VTP backups are fine. At first I thought it might be timeouts, so I used inline edit to incease the telnet timeout for a device to 180s. However, the job fails well within this time period (debug shows on i/o error?). My order of protocols is SSH, Telnet, TFTP. I took a stab in the dark that this suggested a database problem so I picked one at random and deleted it from DCR, and readded it and it worked. However, for the other 48 devices affected it did not.
I'm wondering if I need to do anything to the RME database to get things back to where they were? Do I need to reinitialize the RME database, and if I do that what do I lose? [code]
View 2 Replies
View Related
Oct 14, 2012
I would like to have a support on AIR-AP1142N-E-K9 configurations.How I can config this AP?
View 1 Replies
View Related
Sep 27, 2011
I was recently given a Cisco 7200 VXR and told to erase the stored configurations in it. how to do erasing of Cisco 7200 stored config else I might have to delete them line by line.
View 4 Replies
View Related
Jun 11, 2012
I like to know how I can save or export all of my devices configurations to an FTP server for example.Cisco Prime LMS 4.2 appliance.
View 4 Replies
View Related
May 20, 2012
What module is used to push configurations in LMS 3.2.1?
View 1 Replies
View Related
Aug 22, 2011
Here is my basic network layout for multicasting for Syn-apps
Multicast Source-->3750 SW (add PIM SM-DM? Yes/No)-->3845 WAN Router (add PIM SM-DM? Yes/No)-->T1-->2821 (add PIM SM-DM? Yes/No)-->3560 SW (add PIM SM-DM? Yes/No)
OK, in this is it necessary to configure "IP Multicast-routing" on the switches? Do I configure PIM on all interfaces that will handle multicasting (router and switches?) If PIM is enabled on the 3750 do I need PIM configured between the 3845 and the 2821 ? Do I configure the Auto-RP on the 3750 or the 3845 ?
View 3 Replies
View Related
Dec 22, 2012
I have built my own computer and have almost finished with everything, but I am unsure as to how to set up the wireless capabilities for it. I am submitting this thread on the computer itself, but am using an ethernet cord to connect to the internet. I don't know if I need to download and install a different driver or if there is a simple way to just change some settings in the control panel. I am using windows 7 64 bit. The networking hardware is a realtek 8111f Gigabit LAN controller
View 1 Replies
View Related
Feb 12, 2012
We have blocked some sites in router which our user cannot access and it gets them default browser message "pages cannot be displayed". But I want to display pages like "You are trying to access unauthorized website" or something like that when they try to open such websites.
View 1 Replies
View Related
