Siemens Giga Set SE567 - How To Set Up Configurations
Sep 9, 2011
My friend recently let me have his Seimens Gigaset SE567 modem which i needed cause it has a router but as soon as i switched it with my old router which is a Westell 6100f,the internet light wont show up ..so i contacted verizon and they said that there service is plug and play type of service so i am lost on what to do ..i looked around the forums and i got close by going to the browser and typing the IP but from there i am stuck ..i don't know how to set up any thing in the configurations.
So, brand new Inspiron n7110 lappy running Windows 7 Home Premium (64 bit). Got it home, fired it up and found that it could see the network, but refused to actually do anything with it, or even cough up a specific error message other than 'Windows was unable to connect to (networkname)'.Fiddled with it for a while, entered and re-entered the passkey, mucked about with settings, made sure that the network name and whatnot were all entered correctly, and eventually got annoyed and simply disabled security. Lo and behold, it worked beautifully... sometimes. Connectability was still badly erratic (didn't get any unplanned disconnects, but when it booted up, it was pretty much even odds as to whether or not it would connect). But as soon as I re-enabled security (WEP, in this case.I suppose I really should figure out how to get WPA to work, but one problem at a time >.<)The router is a Siemens SE567.
I'm running Vista on my Desktop, and the router is a Gigaset SE567/8 Series. Whenever I turn my computer on, it will connect to the network, but not to the internet. I get the caution symbol in the task bar with the network icon, and it show the "identifying ( mySSID )". I have to unplug the router for 30 seconds in order to make it work correctly. This router was just installed by my ISP the other day and its been acting this way since then.
I was trying to enable AutoQoS on my router 3925 GE interfaces, but failed to do so !! But I was able to do so on FE interfaces !! I have Security/K9 and Data/K9 license on this router. Or do I still miss out anything ?? I am on IOS 150-1(M4).
I was able to enable AutoQoS on all my Cisco 2811 and 1841 routers !
I already connected the wires to my computer and I already switch on the power of the GIGASET , unfortunately I still cannot connect to the internet using my PSP and LAPTOP
How can I get a driver for this wireless modem? My netgear failed completely. I am using a neighbour's connection to get on to the internet, and tried to download a driver, but every link I could find wanted to search my computer for the hardware. Ridiculous! I need a driver to make it work, and if I plug the Siemens in I lose the connection to get a driver.
I want to update my router as it currently provides poor wireless connectivity. My current router is a Siemens Gigaset SE587 wlan dsl. This supports a 802.11g frequency, though I'd like to update my home network to 802.11n. My concern is this, is it worth buying a new router/hub that supports this frequency if the other devices in my home are still using 802.11g, i.e. Xbox 360, Nintendo Wii, Laptop etc. Would it be worth instead to purchase a homeplug kit instead?
I have the same problem connecting my sl2-141 siemens router to thomphson cable modem. What I have heard is that the router can be hacked throw the profile.xml file,one can change the connecting type to "dynamic ip",what i need to know is what entry in the profile.xml file t5o change to what value.
Does anyone Know if I can use Siemens cat6 jacks with any other face plate? I can get all Siemens stuff from work, but am not overly fond of how their face plates look to put them all over my house.
I'm trying to hook up a Siemens Speedstream 4100 and a Linksys E2500. The internet works fine when I plug the modem directly into the computer. When I try to run it through the router, though, the router install appears to work right but I get a message saying that my internet connection might not be working. I power-cycled everything - unplugged all the cords and waited 20 minutes before restarting. It sounds like putting my modem in bridge mode might be the move? When I type in 192.168.0.1, I get a message that says "Server says: Linksys E2500." It also wants login information, and I'm not sure what that would be.
I cannot install driver for Nokia Siemens Network c2110. when try it show error message then followed by another message showing" required administrative right....." where as this connetion works on laptop and that same file installed into another computer.
I have an esprimo fujitsu seimens laptop and have just purchased a kodak esp 3.2s printer. I have a belkin router and am unable to install the printer, it is not recognising the router.
I have a modem router (TP-Link TD-W8961ND) connected to the internet and working fine. It is broadcasting a wireless network and that too works fine.
I have a second modem router (Siemens SL2-141) functioning as an extender. It is wired to the first router and broadcasting a wireless network with the same SSID, same security, but on a different channel. DHCP and UPnP are disabled on the second router. My i Pad, iPhone, and Win7-based Think Pad are all able to move between the two networks with no problems.
We also have a Win XP SP2 Net book. When in proximity to Router1, this machine accesses the LAN and Internet with no problems. As soon as it gets closer to Router2, it picks up the signal and shows an "Excellent"/"Strong" connection but it can no longer see the internet. It can see Router2's config page and the other machines on the network but it cannot get past the router to the internet.
How I connect internet through wi-fi using BSNL Broadband I want to know primary DNS step 1/2, My Mobile set is Nokia C3-01 and Router is Seimen gigaset SE568. My Mobile Nokia C3-01 is not connecting internet through wi-fi using BSNL Broadband. I need to fill the primary DNS step 1/2 in the settings so I want to know the primary DNS
I am using a broadband connection on a PC running Windows 7. The plan which my ISP is providing me comes with a speed of 4Mbps upto first 20 GB and then 512Kbps after that, every month. My problem is that I am getting only 65-70 Kbps download speed. (tested over various sites and torrents). My router (Nokia Siemens) settings show that my Downstream speed has been assigned as 7999 Kbps but still I am not getting the speed anywhere near that and I have not consumed the 20GB limit as yet.
I have a 2951 which i want to integrate to the CUCM and wish to plug a Siemens ISDX into it which is the best card to use NM-HDV2-1T1/E1 or WIC2-2MFT-T1/E1? its QSIG
I recently purchased a Wi-Fi repeater (Siemens Gigaset Repeater WLAN SE365) to boost my wi-fi signal throughout my house without having to drill through walls of concrete (with a boost in phone wi-fi in mind on the top floor of the house). I was advised to buy one specifically with the make and model of my router in mind, as connectivity might be an issue if these don't match up. I own a Siemens Gigaset SX55 router so there should be no issue there (I can use the repeater on 2 different frequencies, not sure which one is best, 2.4 or 5 ghz). The instruction manual told me to connect the repeater to my pc once (through use of an Ethernet-cable supplied) so I could alter the settings of the repeater to match with that of my router (same SSID, protection method, channel). Whereas naming it the same as the router by modifying the SSID and using the same ASCII WEP-protection password as the router were doable, I could not find an option to change a channel.
At this point the instruction manual was fresh out of ideas and told me that I had set up the repeater as it should be installed. After unplugging it from my pc and plugging the regular ethernet cable back in for internet (There is wi-fi coming from the router downstairs but also a cable through the house to the pc) I was ready to go and seeing the wi-fi bars on my phone jump up to maximum made me extremely happy. Unfortunately the phone (and the app Wifi Analyzer) did recognize the full signal but when trying to open sites or apps that use internet it responded as if it had no signal whatsoever
Anyone has a register of problems between a router WRT54GH and A495 telefone of Siemens?I mean they can be working in the same frequency, that´s why in some rooms I can connect my wireless network very well.
I have a problem with siemens industrial profinet apparatous and my Cat2960.
Siemens host can be pinged without any problem but they are not able to do any other kind of traffic. If i look at the interface I can find that all ingress packet are UNKNOWN DROPPED.
I found a document where si explained that "probably" siemens host are using packet with 802.1p header and vlan 0.
I tried the following tests:
1) port in access mode - failed 2) port in trunk mode with native vlan - failed 3) port in access mode with voice vlan - failed 4) port in acess-mode with voice vlan dot1p - failed
I have a Domain Controller on windows 2003 advanced server. and I have roles and some configuration such as rights, user accounts, DHCP configuration, DNS server and etc on it.Some times windows needs to be reinstalled but after reinstalling,configuration of roles would be lost. I don't know how can I backup these settings? Is there any solution about this problem.I know a simple way is creating an image of windows installation drive by an application such as Norton Ghost but I'm talking about windows solution.
