Siemens Speedstream 4100 - Can't Connect To Internet Through Router
Mar 19, 2013
I'm trying to hook up a Siemens Speedstream 4100 and a Linksys E2500. The internet works fine when I plug the modem directly into the computer. When I try to run it through the router, though, the router install appears to work right but I get a message saying that my internet connection might not be working. I power-cycled everything - unplugged all the cords and waited 20 minutes before restarting. It sounds like putting my modem in bridge mode might be the move? When I type in 192.168.0.1, I get a message that says "Server says: Linksys E2500." It also wants login information, and I'm not sure what that would be.
View 4 Replies
ADVERTISEMENT
May 15, 2011
I'm trying to change the way my network is set up by replacing an old cheap Switch with a newer Router that has some QoS options.
Modem: Motorola SBG900 LINK (provided by Time Warner, not purchased by me)
Old Switch: Zonet ZFS3008 LINK
New DLink Router: D-Link DGL-4100 LINK
Currently, my network is set up as follows, arrows being Ethernet cables:
Cable Modem w/ Wireless <-------> Old Switch <-------> 3 PCs and a Printer
With everything set up as shown above everything works fine, but I want to change it to:
Cable Modem w/ Wireless <-------> DLink Router via it's WAN port <-------> 3 PCs and a Printer
Simple change, right? Apparently not.A few things aren't working when I swap the DLink Router for the old Switch.
1. Internet does not work, though I can log into the DLink Router in a web browser and see all of the settings.
2. The IP address that used to go to the Modem (192.168.0.1) now goes to the DLink Router, and I cannot get to the Modem anymore via a web browser with any IP address.
3. The wireless from the Modem stops working.
4. I see the following when logged into the DLink Router and looking at the Status tab:
. . Connection Type :DHCP Client
. . Cable Status :Connected
. . Network Status : Establishing (Please Wait...) (it never establishes)
I have noticed that the DLink Router and Cable Modem both are doing DHCP, and I am wondering if that is creating a conflict that is causing the problem. However, simply disabling DHCP for the DLink Router and otherwise leaving the connections as they are still does not get the internet working.
<----------------insert a couple hours of fiddling with it some more------------->
The following setup works as far as letting everyone online, but QoS rules in Gamefuel are not getting enforced:
Cable Modem w/ Wireless (DHCP enabled) <-------> Old Switch <-------> DLink Router (DHCP disabled) via LAN port, leaving WAN port unused <-------> 3 PCs
I can now log into the Cable Modem via 192.168.0.1 and the DLink Router via 192.168.0.2. The wireless internet is also working again as well. My PC uses Windows 7, the other two PCs we have are on Windows XP and Vista.
View 10 Replies
View Related
Sep 20, 2011
I have a modem router (TP-Link TD-W8961ND) connected to the internet and working fine. It is broadcasting a wireless network and that too works fine.
I have a second modem router (Siemens SL2-141) functioning as an extender. It is wired to the first router and broadcasting a wireless network with the same SSID, same security, but on a different channel. DHCP and UPnP are disabled on the second router. My i Pad, iPhone, and Win7-based Think Pad are all able to move between the two networks with no problems.
We also have a Win XP SP2 Net book. When in proximity to Router1, this machine accesses the LAN and Internet with no problems. As soon as it gets closer to Router2, it picks up the signal and shows an "Excellent"/"Strong" connection but it can no longer see the internet. It can see Router2's config page and the other machines on the network but it cannot get past the router to the internet.
View 2 Replies
View Related
Jul 4, 2011
I am trying to add my Hisense LED42T18GP to my home Siemans Gigaset SE568 WAN. The TV has two modes of setting up access to the Network Neighbourhood DHCP IP (AUTO) and Fix IP (Manual) I can't get either to connect and I suspect I have to change something on the Router.When I select auto setup I get "On: DHCP not ready!" when I set the fixed IP I get "On: Can't get any IP" The TV handbook is no goog, there are 3 things to be set 1) IP address but it does not say IP address of what - Router, Desktop computer or TV. 2) Network mask is no problem. 3) default gateway does not specipy if this should be the IP address of the Router, WAN or desktop computer. I have tried every combination of each and always get the same result. The router has Full internet Gateway Device IGD support enabled.
View 2 Replies
View Related
Nov 9, 2012
My home router is an aging D-Link DGL-4100 and I am looking to replace it.My max budget is ~$250 USD.
I use 2 Ubiquiti Unifi UAP-Pro APs in my home for WIFI access, so I have the WIFI aspect of my home network covered completely. All wiring in my home is either Cat5e or Cat6, my switch is a gigabit HP ProCurve 1810G-24, and my cable modem is a Motorola SB6120 (Comcast cable broadband). I have 7 IP cameras (security system), 4 streaming media players, several PCs, a server, and several other network connected devices. I am the only resident.
I am looking to maximize my WAN to LAN (& LAN to WAN) throughput while maintaining a very secure network. I also want the router to have reliable VPN. If it is a wireless router, I would most likely not utilize the WIFI feature, probably turning off the WIFI radios and just use the router functionality.
I don't have the time/patience to build a PFSense (or similar) box and learn the software, so am only considering an off-the-shelf solution. Yes I know that PFSense and Untangle are great, I simply don't have time to learn them presently or in the foreseeable future.So, which router for wired performance and security would you recommend?
View 2 Replies
View Related
Mar 28, 2013
Could connect the Siemens IWLAN RCoax Cable on Cisco AP2600 / 3600 ?
View 8 Replies
View Related
Aug 17, 2011
Does the speedstream 5360 have a firewall or NAT?
View 3 Replies
View Related
Jun 1, 2011
My brother's Speedstream has died. Lights don't work, etc. etc. He has ATT DSL in Detroit; Detroit does not have an internet wireless service, so he has to deal with ATT. He's po'd that he's paying $92 a month for service that doesn't work. I told him he needed a new DSL modem.
View 2 Replies
View Related
Nov 8, 2011
I fiddled with the configure screens using the admin/admin id/password and using the settings from the modem I was given from YAK I now have the SpeedStream 6250 working! If you enter in all the addresses into the various locations the modem will work. Even though it's the Bell interface"
View 2 Replies
View Related
Mar 25, 2012
How can I access this router?
View 2 Replies
View Related
Jun 6, 2012
I want to update my router as it currently provides poor wireless connectivity. My current router is a Siemens Gigaset SE587 wlan dsl. This supports a 802.11g frequency, though I'd like to update my home network to 802.11n. My concern is this, is it worth buying a new router/hub that supports this frequency if the other devices in my home are still using 802.11g, i.e. Xbox 360, Nintendo Wii, Laptop etc. Would it be worth instead to purchase a homeplug kit instead?
View 3 Replies
View Related
Mar 7, 2011
I have the same problem connecting my sl2-141 siemens router to thomphson cable modem. What I have heard is that the router can be hacked throw the profile.xml file,one can change the connecting type to "dynamic ip",what i need to know is what entry in the profile.xml file t5o change to what value.
View 6 Replies
View Related
Jul 25, 2012
I had windstreams modem "speedstream 4200" but parents for whatever reason thought the 4300 would change everything. With the 4200 I was open for gaming, could connect. With this 4300 I can't connect to anyone at all. I disabled DHCP server in my rotuer and that aving more fails than succeeds. (in connecting to people).My router doesn't have bridge mode but my modem does, I don't know what it does in the modem. My friend had the exact same problem I did and he put his router in bridge mode which I do not.
View 13 Replies
View Related
Oct 12, 2011
I am having trouble networking an HP LaserJet 4100 series printer from a Windows XP computer to my Windows 7 laptop. I have searched and solved the initial issue of the password being asked. That has been taken care of. I am able to search for and find the printer properly on the network, however when I select the printer it says that there is no valid driver found. The printer connects to the XP computer VIA parallel port. I ordered a USB to Parallel converter and I successfully connected the printer DIRECTLY to my laptop and it installed itself without the need for a special driver. So it prints successfully from either computer when connected directly but when I have it connected to the desktop and I try to network it, I still get the error that there is no valid driver.
View 4 Replies
View Related
May 4, 2012
How I connect internet through wi-fi using BSNL Broadband I want to know primary DNS step 1/2, My Mobile set is Nokia C3-01 and Router is Seimen gigaset SE568. My Mobile Nokia C3-01 is not connecting internet through wi-fi using BSNL Broadband. I need to fill the primary DNS step 1/2 in the settings so I want to know the primary DNS
View 1 Replies
View Related
Dec 23, 2011
where can I download firmware upgrade for siemens SE572 wireless router
View 2 Replies
View Related
Nov 22, 2012
Anyone has a register of problems between a router WRT54GH and A495 telefone of Siemens?I mean they can be working in the same frequency, that´s why in some rooms I can connect my wireless network very well.
View 1 Replies
View Related
Dec 25, 2005
I had to totally reinstall windows Me and all software. Now I cant connect to the internet. I can't find a device driver for the ethernet card. There are 2 devices the manager is not recognizing PCI communication device and PCI Ethernet controller.I don't seem to be able to find an exact type for either.
View 4 Replies
View Related
Dec 28, 2010
DGL-4100
-> Wii
-> X360
-> PS3
-> DGS-2205 (gigabit switch in study)
*-> My PC
*-> Her PC
*-> DAP-1522
We're on the 192.168.1.x domain, and I've already hooked my PC up directly to the DAP-1522 and switched its IP address. So now, I can connect to it through the switch. I've renamed it, set it to WPA2 with a passphrase, and should be set to go. However, I can't get my laptop, IPod touch, or any devices to see it. Also, the DGL-4100 doesn't list it under the DHCP clients, but as I've got the DAP-1522 set to a static IP of 192.168.1.50.
View 1 Replies
View Related
Sep 18, 2009
How to compete with zyxel´s wireless guest access, when it comes to "one click guest access code"? The one button feature that comes with the printer provided with this solution is a customer demand in may cases. I´m sure that linksys and cisco can figure some easy setup on how to provide this in their portfolio.
View 9 Replies
View Related
May 1, 2012
where i can get driver for siemens gigaset 504 agu? Need driver software.
View 1 Replies
View Related
Sep 9, 2011
My friend recently let me have his Seimens Gigaset SE567 modem which i needed cause it has a router but as soon as i switched it with my old router which is a Westell 6100f,the internet light wont show up ..so i contacted verizon and they said that there service is plug and play type of service so i am lost on what to do ..i looked around the forums and i got close by going to the browser and typing the IP but from there i am stuck ..i don't know how to set up any thing in the configurations.
View 2 Replies
View Related
Aug 11, 2011
wlan is not working vth siemens gigaset se568 modem.when trying to connect wlan then the indicator of wlan turns on and suddenlt it goes to off
View 1 Replies
View Related
Apr 13, 2011
I already connected the wires to my computer and I already switch on the power of the GIGASET , unfortunately I still cannot connect to the internet using my PSP and LAPTOP
View 3 Replies
View Related
Jul 17, 2012
How can I get a driver for this wireless modem? My netgear failed completely. I am using a neighbour's connection to get on to the internet, and tried to download a driver, but every link I could find wanted to search my computer for the hardware. Ridiculous! I need a driver to make it work, and if I plug the Siemens in I lose the connection to get a driver.
View 1 Replies
View Related
Jul 13, 2013
Does anyone Know if I can use Siemens cat6 jacks with any other face plate? I can get all Siemens stuff from work, but am not overly fond of how their face plates look to put them all over my house.
View 1 Replies
View Related
Aug 13, 2011
siemens se568 router installed. Net is fine in PC.but not getting the wifi connection in i fone,despite wifi icon
View 2 Replies
View Related
Apr 21, 2011
I cannot install driver for Nokia Siemens Network c2110. when try it show error message then followed by another message showing" required administrative right....." where as this connetion works on laptop and that same file installed into another computer.
View 1 Replies
View Related
Jan 5, 2013
I have an esprimo fujitsu seimens laptop and have just purchased a kodak esp 3.2s printer. I have a belkin router and am unable to install the printer, it is not recognising the router.
View -1 Replies
View Related
Sep 22, 2011
how to reset nokia siemens 1600 modem as i have forgotten its username & password which i changed?
View 1 Replies
View Related
May 17, 2011
I am using a broadband connection on a PC running Windows 7. The plan which my ISP is providing me comes with a speed of 4Mbps upto first 20 GB and then 512Kbps after that, every month. My problem is that I am getting only 65-70 Kbps download speed. (tested over various sites and torrents). My router (Nokia Siemens) settings show that my Downstream speed has been assigned as 7999 Kbps but still I am not getting the speed anywhere near that and I have not consumed the 20GB limit as yet.
View 12 Replies
View Related
Feb 18, 2012
I would like to install a wireless adapter in my "Fujitso Siemens Scaleo P" desktop ,how do find out which adapter is the most suitable,
View 1 Replies
View Related
Mar 5, 2012
I have a 2951 which i want to integrate to the CUCM and wish to plug a Siemens ISDX into it which is the best card to use
NM-HDV2-1T1/E1 or WIC2-2MFT-T1/E1? its QSIG
View 1 Replies
View Related
